| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the mesh code of Cisco Wireless LAN Controller (WLC) software could allow an unauthenticated, remote attacker to impersonate a WLC in a meshed topology. The vulnerability is due to insufficient authentication of the parent access point in a mesh configuration. An attacker could exploit this vulnerability by forcing the target system to disconnect from the correct parent access point and reconnect to a rogue access point owned by the attacker. An exploit could allow the attacker to control the traffic flowing through the impacted access point or take full control of the target system. This vulnerability affects the following products running a vulnerable version of Wireless LAN Controller software and configured for meshed mode: Cisco 8500 Series Wireless Controller, Cisco 5500 Series Wireless Controller, Cisco 2500 Series Wireless Controller, Cisco Flex 7500 Series Wireless Controller, Cisco Virtual Wireless Controller, Wireless Services Module 2 (WiSM2). Note that additional configuration is needed in addition to upgrading to a fixed release. Cisco Bug IDs: CSCuc98992 CSCuu14804. |
| Firmware upgrade authentication bypass vulnerability was found in Dahua IPC-HDW4300S and some IP products. The vulnerability was caused by internal Debug function. This particular function was used for problem analysis and performance tuning during product development phase. It allowed the device to receive only specific data (one direction, no transmit) and therefore it was not involved in any instance of collecting user privacy data or allowing remote code execution. |
| Session hijack vulnerability in httpd on ASUS RT-N56U, RT-N66U, RT-AC66U, RT-N66R, RT-AC66R, RT-AC68U, RT-AC68R, RT-N66W, RT-AC66W, RT-AC87R, RT-AC87U, RT-AC51U, RT-AC68P, RT-N11P, RT-N12+, RT-N12E B1, RT-AC3200, RT-AC53U, RT-AC1750, RT-AC1900P, RT-N300, and RT-AC750 routers with firmware before 3.0.0.4.380.7378; RT-AC68W routers with firmware before 3.0.0.4.380.7266; and RT-N600, RT-N12+ B1, RT-N11P B1, RT-N12VP B1, RT-N12E C1, RT-N300 B1, and RT-N12+ Pro routers with firmware before 3.0.0.4.380.9488; and Asuswrt-Merlin firmware before 380.65_2 allows remote attackers to steal any active admin session by sending cgi_logout and asusrouter-Windows-IFTTT-1.0 in certain HTTP headers. |
| On Wireless IP Camera (P2P) WIFICAM devices, an attacker can use the RTSP server on port 10554/tcp to watch the streaming without authentication via tcp/av0_1 or tcp/av0_0. |
| An Authentication Bypass (CWE-287) vulnerability in ESMAC (aka Enterprise Server Monitor and Control) in Micro Focus Enterprise Developer and Enterprise Server 2.3 and earlier, 2.3 Update 1 before Hotfix 8, and 2.3 Update 2 before Hotfix 9 allows remote unauthenticated attackers to view and alter configuration information and alter the state of the running product (CWE-275). |
| Kguard Digital Video Recorder 104, 108, v2 does not have any authorization or authentication between an ActiveX client and the application server. |
| IBM Security Guardium 10.0 does not prove or insufficiently proves that the actors identity is correct which can lead to exposure of resources or functionality to unintended actors. IBM X-Force ID: 124739. |
| The Debian initrd script for the cryptsetup package 2:1.7.3-2 and earlier allows physically proximate attackers to gain shell access via many log in attempts with an invalid password. |
| A vulnerability in the authentication module of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to bypass local authentication. The vulnerability is due to improper handling of authentication requests and policy assignment for externally authenticated users. An attacker could exploit this vulnerability by authenticating with a valid external user account that matches an internal username and incorrectly receiving the authorization policy of the internal account. An exploit could allow the attacker to have Super Admin privileges for the ISE Admin portal. This vulnerability does not affect endpoints authenticating to the ISE. The vulnerability affects Cisco ISE, Cisco ISE Express, and Cisco ISE Virtual Appliance running Release 1.3, 1.4, 2.0.0, 2.0.1, or 2.1.0. Release 2.2.x is not affected. Cisco Bug IDs: CSCvb10995. |
| Paid To Read Script 2.0.5 has authentication bypass in the admin panel via a direct request, as demonstrated by the admin/viewvisitcamp.php fn parameter and the admin/userview.php uid parameter. |
| A vulnerability in the REST API of the web-based user interface (web UI) of Cisco IOS XE 3.1 through 16.5 could allow an unauthenticated, remote attacker to bypass authentication to the REST API of the web UI of the affected software. The vulnerability is due to insufficient input validation for the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious API request to an affected device. A successful exploit could allow the attacker to bypass authentication and gain access to the web UI of the affected software. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuz46036. |
| A vulnerability in the session identification management functionality of the web-based GUI of Cisco Integrated Management Controller (IMC) 3.0(1c) could allow an unauthenticated, remote attacker to hijack a valid user session on an affected system. The vulnerability exists because the affected software does not assign a new session identifier to a user session when a user authenticates to the web-based GUI. An attacker could exploit this vulnerability by using a hijacked session identifier to connect to the software through the web-based GUI. A successful exploit could allow the attacker to hijack an authenticated user's browser session on the affected system. Cisco Bug IDs: CSCvd14583. |
| In the GUI of Ceragon FibeAir IP-10 (before 7.2.0) devices, a remote attacker can bypass authentication by adding an ALBATROSS cookie with the value 0-4-11 to their browser. |
| An issue was discovered in the software on Vaultek Gun Safe VT20i products, aka BlueSteal. An attacker can remotely unlock any safe in this product line without a valid PIN code. Even though the phone application requires it and there is a field to supply the PIN code in an authorization request, the safe does not check the PIN code, so an attacker can obtain authorization using any value. Once an attacker sees the Bluetooth Low Energy (BLE) advertisement for the safe, they need only to write a BLE characteristic to enable notifications, and send a crafted getAuthor packet that returns a temporary key, and an unlock packet including that temporary key. The safe then opens after the unlock packet is processed, with no verification of PIN or other credentials. |
| The TLS session cache in FreeRADIUS 2.1.1 through 2.1.7, 3.0.x before 3.0.14, 3.1.x before 2017-02-04, and 4.0.x before 2017-02-04 fails to reliably prevent resumption of an unauthenticated session, which allows remote attackers (such as malicious 802.1X supplicants) to bypass authentication via PEAP or TTLS. |
| An issue was discovered in Advantech WebAccess Version 8.1. By accessing a specific uniform resource locator (URL) on the web server, a malicious user is able to access pages unrestricted (AUTHENTICATION BYPASS). |
| The recv_files function in receiver.c in the daemon in rsync 3.1.2, and 3.1.3-development before 2017-12-03, proceeds with certain file metadata updates before checking for a filename in the daemon_filter_list data structure, which allows remote attackers to bypass intended access restrictions. |
| Crypto-NAK packets in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to bypass authentication. |
| Vulnerability in the Java SE, Java SE Embedded component of Oracle Java SE (subcomponent: Networking). Supported versions that are affected are Java SE: 6u141, 7u131 and 8u121; Java SE Embedded: 8u121. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java SE, Java SE Embedded. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Java SE, Java SE Embedded accessible data as well as unauthorized read access to a subset of Java SE, Java SE Embedded accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.0 Base Score 4.2 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:N/UI:R/S:U/C:L/I:L/A:N). |
| dnsdist version 1.1.0 is vulnerable to a flaw in authentication mechanism for REST API potentially allowing CSRF attack. |
