| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
debugobjects: Don't call fill_pool() in early boot hardirq context
When booting a debug PREEMPT_RT kernel on an ARM64 system, a "inconsistent
{HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage" lockdep warning message was
reported to the console.
During early boot, interrupts are enabled before the scheduler is
enabled. In this window (before SYSTEM_SCHEDULING is set) interrupts can
fire and in the hard interrupt context handler attempt to fill the pool
This can lead to a deadlock when the interrupt occurred when the interrupt
hits a region which holds a lock that is required to be taken in the
allocation path.
Add a new can_fill_pool() helper and reorder the exception rule and forbid
this scenario by excluding allocations from hard interrupt context. |
| In the Linux kernel, the following vulnerability has been resolved:
debugobjects: Do not fill_pool() if pi_blocked_on
On RT enabled kernels, fill_pool() ends up calling rtlock_lock(), which
asserts if current::pi_blocked_on is set, because a task can obviously only
block on one lock as otherwise the priority inheritenace chain gets
corrupted.
Prevent this by expanding the conditional to take current::pi_blocked_on
into account. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Use krealloc_array() in dal_vector_reserve()
[Why & How]
dal_vector_reserve() computes the allocation size as
"capacity * vector->struct_size" using uint32_t arithmetic, which can
silently wrap to a small value on overflow. This would cause krealloc to
return a smaller buffer than expected, leading to heap overflows on
subsequent vector appends.
Replace krealloc() with krealloc_array() which performs an internal
overflow check and returns NULL on wrap, preventing the issue.
(cherry picked from commit 37668568641ccc4cc1dbca4923d0a16609dd5707) |
| In the Linux kernel, the following vulnerability has been resolved:
nvmem: layouts: onie-tlv: fix hang on unknown types
The EEPROM on my board has a vendor specific entry of type 0x41. When
stumbling upon that, this driver hangs in an endless loop.
Fix it by keep incrementing the offset on unknown entries, so the loop
will eventually stop. |
| In the Linux kernel, the following vulnerability has been resolved:
fhandle: fix UAF due to unlocked ->mnt_ns read in may_decode_fh()
may_decode_fh() accesses mount::mnt_ns without holding any locks; that
means the mount can concurrently be unmounted, and the mnt_namespace can
concurrently be freed after an RCU grace period.
This race can happens as follows, assuming that the mount point was
created by open_tree(..., OPEN_TREE_CLONE):
thread 1 thread 2 RCU
__do_sys_open_by_handle_at
do_handle_open
handle_to_path
may_decode_fh
is_mounted
[mount::mnt_ns access]
[mount::mnt_ns access]
__do_sys_close
fput_close_sync
__fput
dissolve_on_fput
umount_tree
class_namespace_excl_destructor
namespace_unlock
free_mnt_ns
mnt_ns_tree_remove
call_rcu(mnt_ns_release_rcu)
mnt_ns_release_rcu
mnt_ns_release
kfree
[mnt_namespace::user_ns access] **UAF**
Fix it by taking rcu_read_lock() around the mount::mnt_ns access, like
in __prepend_path().
Additionally, document the semantics of mount::mnt_ns, and use WRITE_ONCE()
for writers that can race with lockless readers.
This bug is unreachable unless one of the following is set:
- CONFIG_PREEMPTION
- CONFIG_RCU_STRICT_GRACE_PERIOD
because it requires an RCU grace period to happen during a syscall without
an explicit preemption.
This doesn't seem to have interesting security impact; worst-case, it could
leak the result of an integer comparison to userspace (from the level
check in cap_capable()), cause an endless loop, or crash the kernel by
dereferencing an invalid address. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Don't WARN if memory is dirtied without a vCPU when the VM is dying
When marking a page dirty, complain about not having a running/loaded vCPU
if and only if the VM is still alive, i.e. its refcount is non-zero. This
will allow fixing a memory leak for x86 SEV-ES guests without hitting what
is effectively a false positive on the WARN.
For some SEV-ES VM-Exits, KVM keeps a writable mapping of a guest page
across an exit to userspace, and typically unmaps the page on the next
KVM_RUN. But if userspace never calls KVM_RUN after such an exit, then KVM
needs to unmap the page when the vCPU is destroyed, which in turn triggers
the WARN about not having a running vCPU.
Alternatively, SEV-ES could temporarily load the vCPU to suppress the WARN,
as is done in nested_vmx_free_vcpu() (but for completely unrelated reasons;
suppressing WARN from nested_put_vmcs12_pages() is pure happenstance). But
loading a vCPU during destruction is gross (ideally nVMX code would be
cleaned up), risks complicating the SEV-ES code (KVM would need to ensure
the temporarily load()+put() only runs when the vCPU isn't already loaded),
and is ultimately pointless.
The motivation for the WARN is to guard against KVM dirtying guest memory
without pushing the corresponding GFN to the active vCPU's dirty ring, e.g.
to ensure userspace doesn't miss a dirty page. But for the VM's refcount
to reach zero, there can't be _any_ userspace mappings to the dirty ring,
as mapping the dirty ring requires doing mmap() on the vCPU FD. I.e. if
userspace had a valid mapping for the dirty ring, then the vCPU file and
thus the owning VM would still be alive. And so since userspace can't
possibly reach the dirty ring, whether or not KVM technically "misses" a
push to the dirty ring is irrelevant. |
| In the Linux kernel, the following vulnerability has been resolved:
rust: arm64: set uwtable llvm module flag for CONFIG_UNWIND_TABLES
Due to a rustc bug [1] the -Cforce-unwind-tables=y flag only emits the
uwtable annotation for functions, but not for the module. This means
that compiler-generated functions such as 'asan.module_ctor' do not
receive the uwtable annotation.
When CONFIG_UNWIND_PATCH_PAC_INTO_SCS is enabled, this leads to boot
failures because the dwarf information emitted for the kasan
constructors is wrong, which causes the SCS boot patching code to
patch the constructor in an illegal manner. Specifically, the paciasp
instruction is patched, but the autiasp instruction is not. This
mismatch leads to a crash when the constructor is called during boot.
==================================================================
BUG: KASAN: global-out-of-bounds in do_basic_setup+0x4c/0x90
Read of size 8 at addr ffffffe3cc7eb488 by task swapper/0/1
Specifically the faulting instruction is the (*fn)() to invoke the
constructor in do_ctors() of the init/main.c file.
Once the fix lands in rustc, this flag can be made conditional on the
rustc version. Note that passing the flag on a rustc with the fix
present has no effect.
[ The fix [1] has landed for Rust 1.98.0 (expected release on
2026-08-20).
Thus add a version check as discussed.
- Miguel ]
[ Adjusted link and comment. - Miguel ] |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack: destroy stale expectfn expectations on unregister
NAT helpers such as nf_nat_h323 store a raw pointer to module text in
exp->expectfn (e.g. ip_nat_q931_expect). nf_ct_helper_expectfn_unregister()
only unlinks the callback descriptor and never walks the expectation table,
so an expectation pending at module removal survives with a dangling
exp->expectfn into freed module text.
When the expected connection arrives, init_conntrack() invokes
exp->expectfn(), now a stale pointer into the unloaded module. Reproduced
on a KASAN build by loading the H.323 helpers, creating a Q.931
expectation, unloading nf_nat_h323, then connecting to the expected port:
Oops: int3: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:0xffffffffa06102d1
init_conntrack.isra.0 (net/netfilter/nf_conntrack_core.c:1862)
nf_conntrack_in (net/netfilter/nf_conntrack_core.c:2049)
ipv4_conntrack_local (net/netfilter/nf_conntrack_proto.c:223)
nf_hook_slow (net/netfilter/core.c:619)
__ip_local_out (net/ipv4/ip_output.c:120)
__tcp_transmit_skb (net/ipv4/tcp_output.c:1715)
tcp_connect (net/ipv4/tcp_output.c:4374)
tcp_v4_connect (net/ipv4/tcp_ipv4.c:345)
__sys_connect (net/socket.c:2167)
Modules linked in: nf_conntrack_h323 [last unloaded: nf_nat_h323]
Reaching the dangling state requires CAP_SYS_MODULE in the initial user
namespace to remove a NAT helper that still has live expectations, so this
is a robustness fix; leaving an expectation pointing at freed text is wrong
regardless.
Add nf_ct_helper_expectfn_destroy(), which walks the expectation table and
drops every expectation whose ->expectfn matches the descriptor being torn
down. Call it from each NAT helper's exit path after the existing RCU grace
period, so no expectation outlives the code it points at and no extra
synchronize_rcu() is introduced. With the fix, the same reproducer runs to
completion without the Oops. |
| In the Linux kernel, the following vulnerability has been resolved:
hsr: Remove WARN_ONCE() in hsr_addr_is_self().
syzbot reported the warning [0] in hsr_addr_is_self(),
whose assumption is simply wrong.
hsr->self_node is cleared in hsr_del_self_node(), which
is called from hsr_dellink().
Since dev->rtnl_link_ops->dellink() is called before
unregister_netdevice_many(), there is a window when
user can find the device but without hsr->self_node.
Let's remove WARN_ONCE() in hsr_addr_is_self().
[0]:
HSR: No self node
WARNING: net/hsr/hsr_framereg.c:39 at hsr_addr_is_self+0x211/0x3f0 net/hsr/hsr_framereg.c:39, CPU#0: syz.4.16848/17220
Modules linked in:
CPU: 0 UID: 0 PID: 17220 Comm: syz.4.16848 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)}
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026
RIP: 0010:hsr_addr_is_self+0x211/0x3f0 net/hsr/hsr_framereg.c:39
Code: 33 2f 41 0f b7 dd 89 ee 09 de 31 ff e8 c8 b4 c6 f6 09 dd 74 54 e8 0f b0 c6 f6 31 ed eb 53 e8 06 b0 c6 f6 48 8d 3d 2f 50 9c 04 <67> 48 0f b9 3a 31 ed eb 42 e8 c1 13 1f 00 89 c5 31 ff 89 c6 e8 96
RSP: 0018:ffffc900041c70e0 EFLAGS: 00010283
RAX: ffffffff8afdc6ca RBX: ffffffff8afdc4e6 RCX: 0000000000080000
RDX: ffffc90010493000 RSI: 0000000000000948 RDI: ffffffff8f9a1700
RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
R10: ffffc900041c71e8 R11: fffff52000838e3f R12: dffffc0000000000
R13: ffff888041f9e3c0 R14: ffff888086ee3802 R15: 0000000000000000
FS: 00007f6fe985d6c0(0000) GS:ffff888126176000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f80bd437dac CR3: 0000000025096000 CR4: 00000000003526f0
DR0: ffffffffffffffff DR1: 00000000000001f8 DR2: 0000000000000002
DR3: ffffffffefffff15 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
check_local_dest net/hsr/hsr_forward.c:592 [inline]
fill_frame_info net/hsr/hsr_forward.c:728 [inline]
hsr_forward_skb+0xa11/0x2a80 net/hsr/hsr_forward.c:739
hsr_dev_xmit+0x253/0x370 net/hsr/hsr_device.c:236
__netdev_start_xmit include/linux/netdevice.h:5368 [inline]
netdev_start_xmit include/linux/netdevice.h:5377 [inline]
xmit_one net/core/dev.c:3888 [inline]
dev_hard_start_xmit+0x2df/0x860 net/core/dev.c:3904
__dev_queue_xmit+0x1428/0x3900 net/core/dev.c:4870
neigh_output include/net/neighbour.h:556 [inline]
ip_finish_output2+0xcec/0x10b0 net/ipv4/ip_output.c:237
ip_send_skb net/ipv4/ip_output.c:1510 [inline]
ip_push_pending_frames+0x8b/0x110 net/ipv4/ip_output.c:1530
raw_sendmsg+0x1547/0x1a50 net/ipv4/raw.c:659
sock_sendmsg_nosec net/socket.c:787 [inline]
__sock_sendmsg net/socket.c:802 [inline]
____sys_sendmsg+0x7da/0x9c0 net/socket.c:2698
___sys_sendmsg+0x2a5/0x360 net/socket.c:2752
__sys_sendmsg net/socket.c:2784 [inline]
__do_sys_sendmsg net/socket.c:2789 [inline]
__se_sys_sendmsg net/socket.c:2787 [inline]
__x64_sys_sendmsg+0x1c3/0x2a0 net/socket.c:2787
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x15f/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f6feb62ce59
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6fe985d028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f6feb8a6090 RCX: 00007f6feb62ce59
RDX: 0000000000000000 RSI: 0000200000000000 RDI: 0000000000000004
RBP: 00007f6feb6c2d6f R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f6feb8a6128 R14: 00007f6feb8a6090 R15: 00007ffcf01cc488
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Don't warn on NULL cgrp_moving_from in scx_cgroup_move_task()
A WARN fires when systemd's user manager writes "+cpu +memory +pids" to
its own subtree_control while a sched_ext scheduler is loaded:
WARNING: at kernel/sched/ext.c:3227 scx_cgroup_move_task+0xa8/0xb0
scx_cgroup_move_task+0xa8/0xb0
sched_move_task+0x134/0x290
cpu_cgroup_attach+0x39/0x70
cgroup_migrate_execute+0x37d/0x450
cgroup_update_dfl_csses+0x1e3/0x270
cgroup_subtree_control_write+0x3e7/0x440
scx_cgroup_can_attach() arms cgrp_moving_from only when a task's cpu
cgroup changes. It can still be NULL when scx_cgroup_move_task() runs,
through this sequence:
Step Result
--------------------------------- ----------------------------------
1. cpu enabled on cgroup G cpu css = A
2. cpu toggled off then on for G A killed, B created (same cgroup)
3. an exiting task keeps A alive migration skips it, A now stale
4. +memory migrates G stale A vs current B pulls cpu in
5. cpu attach runs for all tasks hits a live, cpu-unchanged task
6. scx_cgroup_move_task() on it cgrp_moving_from NULL -> WARN
The mismatch is that scx_cgroup_can_attach() keys on cgroup identity
while migration drives the move on css identity, so a NULL cgrp_moving_from
here is a legitimate css-only migration, not a missing prep.
The call is already gated on cgrp_moving_from, so just drop the warning.
ops.cgroup_prep_move() and ops.cgroup_move() stay paired. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mincore: handle non-swap entries before !CONFIG_SWAP guard
mincore_swap() also fields migration/hwpoison entries (and shmem
swapin-error entries), which can exist on !CONFIG_SWAP builds when
CONFIG_MIGRATION or CONFIG_MEMORY_FAILURE is enabled. The
!IS_ENABLED(CONFIG_SWAP) guard ran before the non-swap-entry early return,
so mincore_pte_range() can spuriously WARN and report these pages
nonresident on !CONFIG_SWAP kernels.
Move the guard below the non-swap-entry check so only true swap entries
trip the WARN, and migration/hwpoison entries take the existing "uptodate
/ non-shmem" path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bonding: fix NULL pointer dereference in bond_do_ioctl()
In bond_do_ioctl(), slave_dev is obtained via __dev_get_by_name() which
can return NULL if the requested interface name does not exist. However,
the subsequent slave_dbg() call is placed before the NULL check:
slave_dev = __dev_get_by_name(net, ifr->ifr_slave);
slave_dbg(bond_dev, slave_dev, "slave_dev=%p:\n", slave_dev); //here
if (!slave_dev)
return -ENODEV;
The slave_dbg() macro expands to netdev_dbg(bond_dev, "(slave %s): " fmt,
(slave_dev)->name, ...) which unconditionally dereferences slave_dev->name
before the NULL check is performed. This results in a NULL pointer
dereference kernel oops when a user calls bonding ioctl (e.g.
SIOCBONDENSLAVE, SIOCBONDRELEASE, etc.) with a non-existent slave
interface name.
This is reachable from userspace via the bonding ioctl interface with
CAP_NET_ADMIN capability, making it a potential local denial-of-service
vector.
Fix by moving the slave_dbg() call after the NULL check. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: Fix driver removal with disabled KMS
DRM atomic and modesetting aren't initialized if virtio-gpu driver built
with disabled KMS, leading to access of uninitialized data on driver
removal/unbinding and crashing kernel. Fix it by skipping shutting down
atomic core with unavailable KMS. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gem: Fix phys BO pread/pwrite with offset
sg_page() returns struct page pointer not (void *) so the scaling
of pread/pwrite is wrong for phys BO and wrong parts of BO would be
accessed if non-zero offset is used.
Last impacted platform with overlay or cursor planes using phys
mapping was Gen3/945G/Lakeport.
(cherry picked from commit 3e49a2f85070b2fb672c1e0fdba281a4ea3aebe6) |
| In the Linux kernel, the following vulnerability has been resolved:
slimbus: qcom-ngd-ctrl: Avoid ABBA on tx_lock/ctrl->lock
During the SSR/PDR down notification the tx_lock is taken with the
intent to provide synchronization with active DMA transfers.
But during this period qcom_slim_ngd_down() is invoked, which ends up in
slim_report_absent(), which takes the slim_controller lock. In multiple
other codepaths these two locks are taken in the opposite order (i.e.
slim_controller then tx_lock).
The result is a lockdep splat, and a possible deadlock:
rprocctl/449 is trying to acquire lock:
ffff00009793e620 (&ctrl->lock){+.+.}-{4:4}, at: slim_report_absent (drivers/slimbus/core.c:322) slimbus
but task is already holding lock:
ffff00009793fb50 (&ctrl->tx_lock){+.+.}-{4:4}, at: qcom_slim_ngd_ssr_pdr_notify (drivers/slimbus/qcom-ngd-ctrl.c:1475) slim_qcom_ngd_ctrl
which lock already depends on the new lock.
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ctrl->tx_lock);
lock(&ctrl->lock);
lock(&ctrl->tx_lock);
lock(&ctrl->lock);
The assumption is that the comment refers to the desire to not call
qcom_slim_ngd_exit_dma() while we have an ongoing DMA TX transaction.
But any such transaction is initiated and completed within a single
qcom_slim_ngd_xfer_msg().
Prior to calling qcom_slim_ngd_exit_dma() the slim_controller is torn
down, all child devices are notified that the slimbus is gone and the
child devices are removed.
Stop taking the tx_lock in qcom_slim_ngd_ssr_pdr_notify() to avoid the
deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/reclaim: handle ctx allocation failure
Patch series "mm/damon/{reclaim,lru_sort}: handle ctx allocation failures".
DAMON_RECLAIM and DAMON_LRU_SORT could dereference NULL pointers if their
damon_ctx object allocations fail. The bugs are expected to happen
infrequently because the allocations are arguably too small to fail on
common setups. But theoretically they are possible and the consequences
are bad. Fix those.
The issues were discovered [1] by Sashiko.
This patch (of 2):
DAMON_RECLAIM allocates the damon_ctx object for its kdamond in its init
function. damon_reclaim_enabled_store() wrongly assumes the allocation
will always succeed once tried. If the damon_ctx allocation was failed,
therefore, code execution reaches to damon_commit_ctx() while 'ctx' is
NULL. As a result, it dereferences the NULL 'ctx' pointer. Avoid the
NULL dereference by returning -ENOMEM if 'ctx' is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix out-of-bounds read in dp_get_eq_aux_rd_interval()
[Why & How]
The aux_rd_interval array in struct dc_lttpr_caps is declared with
MAX_REPEATER_CNT - 1 (7) elements, indexed 0..6. However, the offset
parameter passed to dp_get_eq_aux_rd_interval() can be as large as
MAX_REPEATER_CNT (8) when a sink reports 8 LTTPR repeaters via DPCD.
This leads to an out-of-bounds read of aux_rd_interval[7] when offset
is 8.
Fix this by growing aux_rd_interval to MAX_REPEATER_CNT elements to
accommodate the full range of valid repeater counts defined by the DP
spec.
(cherry picked from commit a55a458a8df37a65ffda5cf721d554a8f74f6b04) |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Add NULL check for of_reserved_mem_lookup() in airoha_qdma_init_hfwd_queues()
of_reserved_mem_lookup() may return NULL if the reserved memory region
referenced by the "memory-region" phandle is not found in the reserved
memory table (e.g. due to a misconfigured DTS or a removed
memory-region node). The current code dereferences the returned
pointer without checking for NULL, leading to a kernel NULL pointer
dereference at the following lines:
dma_addr = rmem->base; // line 1156
num_desc = div_u64(rmem->size, buf_size); // line 1160
Add a NULL check after of_reserved_mem_lookup() and return -ENODEV if
the lookup fails, which is consistent with the existing error handling
for of_parse_phandle() failure in the same code block. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: fix clock and pinctrl state inconsistency in runtime PM
In i2c_imx_runtime_suspend(), the clock is disabled before switching
the pinctrl state to sleep. If pinctrl_pm_select_sleep_state() fails,
the runtime suspend is aborted but the clock remains disabled, causing
a system crash when the hardware is subsequently accessed.
Fix this by switching the pinctrl state before disabling the clock so
that a pinctrl failure leaves the clock enabled and the hardware
accessible.
In i2c_imx_runtime_resume(), restore the pinctrl state back to sleep
if clk_enable() fails to keep the consistent. |
| In the Linux kernel, the following vulnerability has been resolved:
net: rds: clear i_sends on setup unwind
The RDS IB connection teardown path is written so it can run during
partial startup and on repeated shutdown attempts. It uses NULL
pointers to distinguish resources that are still owned from resources
that have already been released.
When rds_ib_setup_qp() fails after allocating i_sends but before
allocating i_recvs, the sends_out path frees i_sends without clearing
the pointer. A later shutdown pass can still treat that stale pointer
as a live send ring allocation.
Clear i_sends after vfree() in the error unwind path so the existing
shutdown logic continues to use the correct ownership state. |
