| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Dancer2::Plugin::Auth::Extensible versions through 0.713 for Perl allow password reset link poisoning via the request Host header in _default_email_password_reset and _default_welcome_send.
Both default emails emit a link of the form `$base/login/$code`, whose authority comes from the request Host header, or from X-Forwarded-Host under behind_proxy (obtained from Dancer2's request->base function). A POST to /login carrying submit_reset and a username needs no authentication: it stores a fresh reset code against that account and mails the account holder a link to a host of the sender's choosing. The welcome mail takes the same path when the application calls create_user with email_welcome set.
Through 0.711 the handlers read `request->uri_base` and `request->base` directly; Versions 0.712 and later provide an uri_base configuration key that defaults to the untrusted `request->uri_base` when unset.
The default configuration with reset_password_handler enabled and the default message text, a recipient who follows the link hands a working reset code to the sender's host, which is enough to take over the account. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: fix VF bringup affecting PF promiscuous state
Mbox handling of nix_set_rx_mode for a VF with promiscuous and
all_multi flags set to false causes deletion of the PF's promiscuous
and allmulti MCAM rules. This occurs because the APIs that
enable/disable these rules operate only on the PF, even when the
mbox request is made via a VF interface.
Guard both rvu_npc_enable_allmulti_entry() and
rvu_npc_enable_promisc_entry() disable paths with an is_vf() check so
that a VF bringing up or tearing down its interface cannot inadvertently
clear the PF's MCAM rules. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: refuse O_TMPFILE creation with an unmapped fsuid or fsgid
vfs_tmpfile() never checked that the caller's fsuid and fsgid map into
the filesystem. On an idmapped mount whose idmapping does not cover the
caller's fs{u,g}id, the ->tmpfile() instance initializes the new inode
through inode_init_owner(), where mapped_fsuid()/mapped_fsgid() return
INVALID_UID/INVALID_GID, and the tmpfile ends up owned by (uid_t)-1.
Every other creation path already refuses this: may_o_create() (O_CREAT)
and may_create_dentry() (mkdir, mknod, symlink, link) bail out with
-EOVERFLOW via fsuidgid_has_mapping() precisely so that an object cannot
be created with an owner the filesystem cannot represent. An O_TMPFILE
is no exception: it is created I_LINKABLE and linkat(2) can splice it
into the namespace afterwards, so the same guarantee must hold.
Add the missing fsuidgid_has_mapping() check to vfs_tmpfile(). On a
non-idmapped mount the caller's fs{u,g}id always map in the superblock's
user namespace, so this is a no-op there and only takes effect on an
idmapped mount that does not map the caller. It applies to every
filesystem that sets FS_ALLOW_IDMAP and implements ->tmpfile() (tmpfs,
ext4, btrfs, xfs, f2fs, ...), and to overlayfs, whose upper-layer
tmpfile creation funnels through vfs_tmpfile() via backing_tmpfile_open(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: fib: Don't ignore error route in local/main tables.
When CONFIG_IP_MULTIPLE_TABLES is enabled but no rule is added,
fib_lookup() performs route lookup directly on two tables.
Since the first lookup does not properly bail out, the result
of an error route in the merged local/main table could be
overwritten by another route in the default table:
# unshare -n
# ip link set lo up
# ip route add 192.168.0.0/24 dev lo table 253
# ip route add unreachable 192.168.0.0/24
# ip route get 192.168.0.1
192.168.0.1 dev lo table default uid 0
cache <local>
Once a random rule is added, the error route is respected:
# ip rule add table 0
# ip rule del table 0
# ip route get 192.168.0.1
RTNETLINK answers: No route to host
Let's fix the inconsistent behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use opener credentials for FSCTL mutations
SET_SPARSE, SET_ZERO_DATA and SET_COMPRESSION operate on an open SMB
handle but call VFS xattr, fallocate or fileattr helpers with the current
ksmbd worker credentials. Those helpers can revalidate inode permissions,
ownership and LSM policy independently of the SMB handle access mask.
Run each operation with the credentials captured in the target file when
the handle was opened. Keep credential handling local to these single-file
FSCTLs rather than applying session credentials to the complete IOCTL
handler, which also contains handle-less and multi-handle operations. |
| The Backup Migration WordPress plugin before 2.1.7 does not properly restrict a post-restore automatic login mechanism, allowing a user who administers one site of a multisite network to obtain a long-lived authenticated session as an administrator of another site in the same network, without credentials and bypassing two-factor authentication. |
| LDAP Tool Box Self Service Password 1.5.2 contains a password reset vulnerability that allows attackers to manipulate HTTP Host headers during token generation. Attackers can craft malicious password reset requests that generate tokens sent to a controlled server, enabling potential account takeover by intercepting and using stolen reset tokens. |
| The Wishlist Member plugin for WordPress is vulnerable to Account Takeover via Insufficient Verification of Data Authenticity in versions up to and including 3.34.1. This is due to the wpm_register() function validating the registration cookie only against the GET reg parameter while accepting the POST mergewith and POST wpm_id parameters without verifying that the mergewith user ID references a temporary or incomplete registrant that is bound to the current registration transaction. This makes it possible for unauthenticated attackers to take over any existing WordPress account — including administrator accounts — by supplying an arbitrary user's numeric ID as the mergewith value, which causes wp_update_user() to overwrite the target account's username (additionally written via a direct $wpdb UPDATE), password, email address, first name, and last name with attacker-controlled values, while WordPress password and email change notification emails are explicitly suppressed. When wpm_id references a non-existent membership level, no role key is added to the update payload, causing wp_update_user() to preserve the target user's existing role — including administrator — making full privilege escalation a direct consequence of the takeover. |
| The Welcart e-Commerce WordPress plugin before 2.11.33 does not verify the authenticity of its convenience-store / bank-transfer settlement callback: an unauthenticated request can flip an order from unpaid to settled purely from an order number and a status flag, with no signature, amount, or origin check. Because these are pay-later methods, an attacker can mark their own unpaid order as settled and obtain fulfilment without paying. |
| Unauthenticated Privilege Escalation in miniorange otp verification <= 5.5.1 versions. |
| Unauthenticated Broken Access Control in Nokri <= 1.6.6 versions. |
| Budibase versions before 3.40.0 contain an authorization/authentication bypass in the PUT /api/global/users/tenant/owner (changeTenantOwnerEmail) endpoint. On self-hosted instances (SELF_HOSTED or DISABLE_ACCOUNT_PORTAL set), the cloudRestricted middleware is a no-op and the route is protected only by a general authentication check, so any authenticated user — including a lowest-privilege BASIC app user — can reassign the tenant account-holder (top-privilege admin) email to an attacker-controlled address. The attacker can then use the public password-reset flow to take over the admin account, leading to full administrative access. |
| A flaw has been found in macrozheng mall 0504e86. This vulnerability affects unknown code of the file /sso/getAuthCode of the component mall-portal Module. Executing a manipulation can lead to weak password recovery. The attack may be launched remotely. This attack is characterized by high complexity. It is stated that the exploitability is difficult. The exploit has been published and may be used. The vendor deleted the GitHub issue for this vulnerability without any explanation. Afterwards the vendor was contacted early about this disclosure via email but did not respond in any way. |
| An authentication bypass in ManageEngine DDI Central's password-reset workflow allows account takeover. |
| The Wallet for WooCommerce WordPress plugin before 1.6.10 does not verify the amount actually collected for a wallet top-up before crediting the wallet, allowing customers to top up their wallet balance for less than its value. |
| The FoodBoxBooker WordPress plugin before 1.0.7 does not properly validate the password reset request, allowing unauthenticated attackers to reset the password of arbitrary users, including administrators, which could lead to a full site takeover. |
| n8n before 2.32.1 (and before 2.31.5) is vulnerable to account takeover via the Token Exchange Embed Login feature. When a validly-signed incoming token was matched to a local account by its email claim, the service did not verify that the email claim was verified, nor that the trusted key's permitted role ceiling covered that account. As a result, anyone able to obtain a token accepted by a configured trusted key (for example, a trusted issuer emitting unverified email addresses) could authenticate as any existing user and gain full account control. This issue only affects instances where the embed login feature is enabled and at least one trusted key source is configured. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: defer destroy_previous_session() until after NTLM authentication
In ntlm_authenticate(), destroy_previous_session() is called using a
user pointer resolved from the client-supplied NTLM blob username field
before the NTLMv2 response is validated. An authenticated attacker can
set the NTLM blob username to match a victim account and set
PreviousSessionId to the victim's session ID; destroy_previous_session()
destroys the victim's session while ksmbd_decode_ntlmssp_auth_blob()
subsequently rejects the request with -EPERM.
Move destroy_previous_session() and the prev_id assignment to after
ksmbd_decode_ntlmssp_auth_blob() returns success and use sess->user
rather than the pre-authentication lookup result. This matches the
ordering already used by krb5_authenticate(), where
destroy_previous_session() is called only after
ksmbd_krb5_authenticate() returns success. |
| The TrueBooker – Appointment Booking and Scheduler System plugin for WordPress is vulnerable to account takeover via improper password reset validation in all versions up to, and including, 1.2.3. This is due to the plugin not properly validating a user's identity before resetting their password. This makes it possible for unauthenticated attackers to reset the password of arbitrary user accounts, including administrators, and gain access to those accounts. |
| The MStore API WordPress plugin before 4.21.0 does not verify the payment with the payment gateway before marking an order as paid on several of its payment-completion endpoints, allowing an unauthenticated attacker to mark an arbitrary order fully paid without paying and obtain goods or services for free. |
