| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Scriban before 6.6.0 contains an uncontrolled recursion vulnerability in its recursive-descent parser. The parser does not enforce a default expression depth limit (the ExpressionDepthLimit property in ParserOptions defaults to null/disabled), so an attacker who controls template input can supply a deeply nested template (e.g., thousands of nested parentheses or blocks) that exhausts thread stack space and raises a StackOverflowException. Because a StackOverflowException cannot be caught in .NET, this causes immediate, unrecoverable termination of the hosting process, resulting in a denial of service. Applications that process untrusted or user-supplied templates can be exploited remotely without authentication. |
| Scriban before 6.6.0 contains an infinite recursion vulnerability in object rendering when the ObjectRecursionLimit property defaults to unlimited. Attackers can supply circular reference objects to the template context, exhausting stack space and triggering an uncatchable StackOverflowException that terminates the hosting process. |
| Scriban before 7.0.0 (affected versions <= 6.6.0) contains a stack overflow vulnerability in nested array initializer parsing. Deeply nested array initializers recurse through a path (ParseArrayInitializer → ParseExpression → ParseArrayInitializer) that is not covered by the ExpressionDepthLimit counter added in the fix for GHSA-wgh7-7m3c-fx25. An attacker who can supply untrusted input to Template.Parse can trigger an uncatchable StackOverflowException that immediately terminates the process, even with the default ExpressionDepthLimit enabled. |
| Scriban before 7.0.0 contains an uncontrolled recursion vulnerability in the object.to_json builtin function that lacks depth limits and circular reference detection. Attackers can craft templates with self-referencing objects to trigger unbounded recursion, causing a StackOverflowException that fatally terminates the hosting .NET process. |
| Scriban versions 6.6.0 through 7.2.0 contain a non-enforcing ExpressionDepthLimit guard that fails to stop recursive descent parsing of deeply nested expressions. Attackers can supply templates with deeply nested parentheses, array initializers, object initializers, or unary operators to trigger an uncatchable StackOverflowException that immediately terminates the host process. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: avoid heap allocation for free-cluster readahead state
get_nr_free_clusters() allocates a temporary file_ra_state before it
publishes the precomputed free cluster count, sets NVolFreeClusterKnown(),
and wakes vol->free_waitq. If that allocation fails, the worker returns
without setting the flag or waking waiters, so callers waiting for the free
count can block indefinitely.
The readahead state is only used synchronously while scanning the bitmap.
Keep it on the stack and pass it by address to the readahead helper. This
eliminates the early allocation failure path instead of adding a special
case that publishes a conservative count and wakes the waitqueue.
Zero-initialize the on-stack state because file_ra_state_init() only sets
ra_pages and prev_pos.
Apply the same treatment to __get_nr_free_mft_records(), which scans the
MFT bitmap with the same short-lived readahead state. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Fix memory accounting for pinned/unpinned pages
The account_mem() and unaccount_mem() functions call get_uid() which
increments the reference count of struct user_struct on every invocation.
But we don't decrement the count by calling free_uid(). It also
accounted/unaccounted the pages against the current->mm. But its possible
the unaccount_mem() can be called from a different process context than the
one that originally pinned the pages.
Let's fix this by storing the pinning process user_struct and mm_struct
when accounting for pinned pages, and subsequently free these resources
when the pages are unpinned.
[borntraeger@linux.ibm.com: Fixed whitespace] |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: fix deadlock between metadata writeback and transaction commit
When writing out metadata extent buffers in a zoned filesystem,
btree_writepages() holds fs_info->zoned_meta_io_lock across the whole
writeback loop, including the call to btrfs_check_meta_write_pointer() ->
check_bg_is_active().
For the tree-log block group, check_bg_is_active() may fail to activate
the zone and fall back to btrfs_zone_finish_one_bg() to free an active
zone. That path waits for the running transaction to commit while still
holding zoned_meta_io_lock, but the committer needs that same lock to
write out the tree extents, so the two tasks deadlock:
Task A (kworker, metadata writeback) Task B (fsstress, transaction commit)
------------------------------------ -------------------------------------
wb_workfn() btrfs_commit_transaction(T)
btree_writepages() btrfs_write_and_wait_transaction()
btrfs_zoned_meta_io_lock() btrfs_write_marked_extents()
btrfs_check_meta_write_pointer() btree_writepages()
check_bg_is_active() [treelog_bg] btrfs_zoned_meta_io_lock()
btrfs_zone_finish_one_bg() <blocks on zoned_meta_io_lock,
btrfs_zone_finish() held by Task A>
do_zone_finish()
btrfs_inc_block_group_ro()
btrfs_wait_for_commit()
<blocks waiting for commit
of transaction T, done by
Task B>
The sibling branch in check_bg_is_active() already drops zoned_meta_io_lock
around do_zone_finish() for this exact reason. Do the same in the tree-log
branch: release the lock around btrfs_zone_finish_one_bg() and re-acquire
it afterwards. The lock only protects fs_info->active_{meta,system}_bg,
which this branch does not touch, and ctx->zoned_bg keeps a reference to
the block group across the unlock, so nothing is lost while the lock
is dropped.
This hang occasionally reproduces with fstests generic/475 on a zoned
btrfs filesystem. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: fix wrong pci_get_drvdata type in AER handlers
rtw88 stores an ieee80211_hw pointer via pci_set_drvdata() at probe
time, but io_error_detected() and io_resume() retrieve it as a
net_device pointer. This causes netif_device_detach/attach to
operate on an ieee80211_hw struct, reading and writing at wrong
offsets.
Use ieee80211_stop_queues/wake_queues instead, consistent with
every other queue stop/start path in the driver. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix potential infinite loop in rxrpc_recvmsg()
Fix the wait in rxrpc_recvmsg() also take check the oob queue. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_bpf: prevent unbounded recursion in offload rollback
Quan Sun reported [1] a stack overflow in cls_bpf_offload_cmd().
Reproducer on netdevsim: add a skip_sw cls_bpf filter, set the
bpf_tc_accept debugfs knob to 0, then `tc filter replace`. The replace
calls tc_setup_cb_replace() which fails. cls_bpf_offload_cmd() then
swaps prog/oldprog and recursively calls itself to roll back. But
bpf_tc_accept=0 makes the rollback fail too, which triggers yet another
rollback frame with the same arguments, and so on until the stack is
exhausted.
bpf_tc_accept is just a convenient knob for the reproducer. Any driver
whose tc_setup_cb_replace() fails twice in a row can hit the same loop,
so this is not a netdevsim-only issue.
Two ways to fix it:
1) Have the rollback call tc_setup_cb_add() on oldprog instead of
re-entering cls_bpf_offload_cmd().
2) Mark the rollback frame with a flag and skip a second-level
rollback from inside it.
Go with (2). It is the smaller change and keeps the original behaviour:
the rollback still goes through tc_setup_cb_replace(), so the driver
gets one real chance to restore its state. If that attempt also fails,
we just return the original error instead of recursing.
[1]: https://lore.kernel.org/bpf/ce5a6005-3c5e-4696-9e05-eba9461dc860@std.uestc.edu.cn/T/#u |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx: fix locked bus on SMBus block-read of 0 (IRQ)
SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the
interrupt-driven block-read state machine rejects it as -EPROTO. Worse,
it returns without a NACK+STOP: the next receive cycle has already
started, so the target keeps holding SDA and the bus stays stuck until a
power cycle of this i2c controller.
Accept count=0: NACK the in-flight dummy byte (TXAK) and set msg->len to
2 so i2c_imx_isr_read_continue() emits STOP via its normal last-byte
path. The dummy byte is discarded; block-read callers only consume
buf[0..count-1].
Reading I2DR has likewise already armed the next byte on the
count > I2C_SMBUS_BLOCK_MAX error path, so NACK it (TXAK) before aborting
with -EPROTO; otherwise the failing transfer's STOP cannot complete and
the bus stays held.
The atomic path regressed earlier (v3.16) and is fixed separately; this
patch covers only the v6.13 state-machine rework. |
| IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to cause a denial of service due to uncontrolled recursion. |
| Courier IMAP before 6.0.1 and Courier Mail Server before 2.0.2 allow authenticated IMAP users to crash the imapd process via deeply nested parenthesized SEARCH queries. The SEARCH command parser (alloc_search_key in searchinfo.C) recursively descends on nested parenthesized groups through a mutual recursion chain with alloc_search_andlist() and alloc_search_notkey(), with no depth limit. Courier IMAP has no overall command line length limit, making exploitation trivial. A single IMAP command with ~2500 nested parentheses overflows the 8MB default stack, causing SIGSEGV. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Fix signed integer truncation in IPC receive
Fix potential buffer overflow where firmware-supplied data_size is cast
to signed int before being used in min_t(). Large unsigned values
(>= 0x80000000) become negative, causing unsigned wraparound and
oversized memcpy operations that can overflow the stack buffer.
Change min_t(int, ...) to min() as both values are unsigned and can be
handled by min() without explicit cast. |
| node-tar is a tar archive manipulation library for Node.js. Prior to 7.5.21, node-tar's filesFilter in src/list.ts uses the recursive mapHas helper to walk an archive entry path upward with path.dirname() and no segment cap when tar.t(...) or tar.x(...) receives a non-empty member-selection list. A crafted GNU L or PAX x long-path header with thousands of slash-separated segments reaches this.filter(entry.path, entry) in Parser[CONSUMEHEADER] in src/parse.ts before Unpack[CHECKPATH] applies maxDepth, causing an uncatchable RangeError stack overflow that terminates asynchronous and streaming Node.js consumers. This issue is fixed in version 7.5.21. |
| A flaw in Elasticsearch allows a low-privileged authenticated user to submit a single request containing a crafted user-supplied input. A specific internal component validates the input using a recursive routine and applies no bound to the length of the value being validated, so the validation causes the thread to exhaust its stack. The resulting fatal error is not handled by the surrounding execution paths and terminates the affected node process, producing a denial of service. |
| Elasticsearch does not apply its configurable input length restriction to a user-supplied pattern accepted by an intervals query. Compiling a deeply nested pattern drives unbounded recursion that exhausts the thread stack and raises a fatal error, terminating the Elasticsearch node process and causing a denial of service for that node. An authenticated user holding only read-only privileges on a single searchable index can trigger the condition with one small search request. |
| A flaw in Elasticsearch allows an authenticated user with the privileges required to invoke the simulate pipeline API endpoint (https://www.elastic.co/docs/api/doc/elasticsearch/operation/operation-ingest-simulate) to submit a request that causes a self-referential data structure to be created. When a specific internal component later processes that structure, the operation recurses without bound and raises a fatal error that is not handled by the surrounding execution path, terminating the affected node process and resulting in a denial of service. |
| Uncontrolled Recursion (CWE-674) in Elasticsearch can lead to denial of service via Serialized Data with Nested Payloads (CAPEC-230). An authenticated user holding only read privileges on a single index can submit one specially crafted search request whose deeply nested structure is processed without a depth limit, exhausting the thread stack and terminating the affected node. |
