| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: avoid heap allocation for free-cluster readahead state
get_nr_free_clusters() allocates a temporary file_ra_state before it
publishes the precomputed free cluster count, sets NVolFreeClusterKnown(),
and wakes vol->free_waitq. If that allocation fails, the worker returns
without setting the flag or waking waiters, so callers waiting for the free
count can block indefinitely.
The readahead state is only used synchronously while scanning the bitmap.
Keep it on the stack and pass it by address to the readahead helper. This
eliminates the early allocation failure path instead of adding a special
case that publishes a conservative count and wakes the waitqueue.
Zero-initialize the on-stack state because file_ra_state_init() only sets
ra_pages and prev_pos.
Apply the same treatment to __get_nr_free_mft_records(), which scans the
MFT bitmap with the same short-lived readahead state. |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Repost Receive buffers for malformed replies
rpcrdma_wc_receive() decrements the transport's Receive count for
every completion before it dispatches a successful Receive to
rpcrdma_reply_handler(). The handler must post a replacement
Receive WR before returning unless ownership of the rep has moved
elsewhere, as on the backchannel path.
Commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC
senders and posting Receives") moved the Receive refill out of
rpcrdma_wc_receive(), where it had run ahead of every reply, into
rpcrdma_reply_handler() so that the responder's credit grant could
be parsed before reposting. The bad-version and short-reply exits
never reach that refill: they recycle the rep and return without
calling rpcrdma_post_recvs().
A remote peer can therefore drain the client's posted Receive
queue by sending a sustained stream of replies that are shorter
than the fixed transport header or that carry an unrecognized
RPC/RDMA version. Each such reply consumes one posted Receive
without replacing it. Once the queue empties, the peer's next
Send finds no posted Receive and the transport stalls until
reconnect.
Route both malformed-reply exits through the shared repost tail
after recycling the rep, refilling against buf->rb_credits, the
most recent accepted credit grant. Neither exit updates the
congestion window, so RPCs admitted under the previous grant
remain in flight awaiting replies. A smaller refill target would
let a stream of malformed replies ratchet the posted Receive count
down to the batch floor while the congestion window still admits
rb_credits RPCs; a burst of valid replies to those RPCs could then
overrun the posted Receives, and because the client connects with
rnr_retry_count of zero, a single RNR NAK terminates the
connection. Refilling against rb_credits also restores the target
that applied to malformed replies before commit 2ae50ad68cd7
("xprtrdma: Close window between waking RPC senders and posting
Receives") when rpcrdma_post_recvs() computed it from rb_credits
internally. rb_credits is at least one from connection
establishment onward, so the repost path always keeps Receives
posted. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix log flood after cmd_mbox failure
hns_roce_cmd_mbox() is the command interface between driver and
hardware. When hardware is abnormal, the unlimited error printings
after hns_roce_cmd_mbox() failure will cause log flood and even
system crash.
Replace ibdev_err() and ibdev_warn() with their ratelimited versions
in the error handling path after hns_roce_cmd_mbox() (and its wrappers
hns_roce_create_hw_ctx/hns_roce_destroy_hw_ctx) fails. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: drain continuation descs after overflow in xsk_build_skb()
Fix generic xmit path multi-buffer logic when packets are either too big
(count of descriptors exceed MAX_SKB_FRAGS) or an invalid descriptor is
included in fragmented packet. Introduce xdp_sock::drain_cont and act
upon this flag - when it is set, keep on consuming descriptors from
AF_XDP Tx ring and put them directly onto Cq. Previously these
descriptors were silently lost and could never be reached again. |
| @fastify/multipart is a multipart form-data parser for Fastify. In versions from 3.0.0 up to but not including 10.1.1, request.saveRequestFiles() can leave completed temporary files on disk when a client disconnects while the parser is advancing between multipart parts. The iterator rejection that occurs between parts falls outside the per-file cleanup path, so an earlier completed file is never removed. An unauthenticated client can repeat this to cause persistent, linear disk consumption, leading to denial of service. This is an incomplete-fix variant of CVE-2025-24033. The issue is fixed in @fastify/multipart 10.1.1. Users should upgrade to 10.1.1. |
| Allocation of resources without limits or throttling vulnerability in Apache Struts. When no fixed locale is configured, the locale used for localized-text lookups is taken from the incoming request, allowing an unauthenticated remote client to cause the framework's internal localized-text caches to grow without bound and exhaust the Java heap, denying service to other users. Applications that configure a fixed locale are not affected.
This issue affects Apache Struts: from 2.0.0 through 2.3.37, from 2.5.0 through 2.5.33, from 6.0.0 through 6.10.0, from 7.0.0 through 7.2.1.
Users are recommended to upgrade to version 6.11.0 or 7.3.0, which fixes the issue. |
| A flaw was found in search-v2-api. An unauthenticated attacker can exploit this by sending requests with unique random bearer tokens. Each unique token creates a permanent entry in the unbounded tokenReviews cache, which is not properly cleared. This can lead to memory exhaustion of the search-api pod, resulting in a Denial of Service (DoS). |
| Previously, DecodeElement would reset the depth counter causing it to never fire; this could lead to stack exhaustion. |
| Previously, resolving relative paths containing parent directory ('..') segments performed string conversions and buffer rewrites on each step, resulting in quadratic time complexity and high memory allocation overhead. Now, path resolution operates on a byte buffer using index-based backtracking for '..' segments, eliminating the quadratic time complexity and significantly reducing memory allocations. |
| rsync 3.4.2 before 3.5.0 contains a denial of service vulnerability that allows a remote sender to exhaust system resources by specifying the --zt short alias for --compress-threads, which bypasses the refuse options directive's string matching on long option names. Attackers can specify --zt=N with a large value to spawn an unbounded number of Zstandard worker threads on the receiver, exhausting available thread and memory resources. |
| When a server is configured to support unencrypted HTTP/2, it reads a few bytes from each new connection to see if they contain the HTTP/2 client preface. ReadHeaderTimeout is unexpectedly not being applied when doing this. |
| Handshake messages, such as KeyUpdate, are always considered as state-advancing, regardless of whether a handshake has been completed or not. As a result, a malicious client can keep sending KeyUpdate messages to force the server to keep performing key derivation operations indefinitely. |
| vLLM is an inference and serving engine for large language models. From 0.19.0 until 0.26.0, the /v1/completions CompletionRequest.prompt field in vllm/entrypoints/openai/completion/protocol.py accepts an unbounded list[str] or list[list[int]], prompt_to_seq() in vllm/renderers/inputs/preprocess.py and OnlineRenderer.preprocess_completion() in vllm/renderers/online_renderer.py expand every element, and vllm/entrypoints/openai/completion/serving.py creates one engine generator and response slot per prompt, allowing an authenticated API client to exhaust CPU, memory, async scheduling capacity, engine request slots, and response buffering with one request. This issue is fixed in version 0.26.0. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to improper processing of DRDA and DDM resynchronization requests. |
| FileBrowser versions before 2.63.19 fail to enforce the declared Upload-Length in the TUS resumable-upload PATCH endpoint, allowing authenticated users to write arbitrary data to disk. Attackers can send oversized request bodies that exceed the declared upload length to exhaust available disk space and cause service unavailability. |
| rsync daemon 2.0.0 before 3.5.0 contains a denial of service vulnerability that allows unauthenticated remote attackers to exhaust daemon connection slots by stalling the handshake process before or after module selection without triggering the I/O timeout. Attackers can open many simultaneous connections and trickle data at the minimum rate to avoid timeout, or stall entirely before module selection where no timeout applies, consuming all available connection slots and denying service to legitimate clients. |
| Laravel Nova 3.7.0 contains a denial of service vulnerability that allows authenticated users to crash the application by manipulating the 'range' parameter. Attackers can send simultaneous requests with an extremely high range value to overwhelm and crash the server. |
| A vulnerability was found in TRENDnet TEW-816DRM GURNC4.OT182B-C-TN-R1B028-US.EN. This impacts an unknown function of the file /etc/bftpd.conf of the component bftpd. The manipulation of the argument USERLIMIT_GLOBAL results in allocation of resources. It is possible to launch the attack remotely. This vulnerability only affects products that are no longer supported by the maintainer. |
| A flaw was found in libdm. A local attacker could craft a malicious Logical Volume Manager (LVM) metadata configuration with deeply nested structures. This could lead to uncontrolled recursion in the libdm configuration file parser, exhausting the stack and causing any LVM command reading the metadata to crash. This vulnerability results in a Denial of Service (DoS) for affected systems. |
| pgjdbc is an open source postgresql JDBC Driver. From version 42.2.0 to before version 42.7.11, pgjdbc is vulnerable to a client-side denial of service during SCRAM-SHA-256 authentication. A malicious server can instruct the driver to perform SCRAM authentication with a very large iteration count. With a large enough value, the client spends an unbounded amount of CPU time inside PBKDF2 before authentication can fail. A single attempt ties up a CPU core. Repeated or concurrent attempts exhaust client CPU and can wedge connection pools. In affected versions, loginTimeout did not fully mitigate this problem. When loginTimeout expired, the caller could stop waiting, but the worker thread performing the connection attempt could continue running and burning CPU inside the SCRAM PBKDF2 computation. This issue has been patched in version 42.7.11. |
