| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix race between freeing data and fs accessing it
AppArmor was putting the reference to i_private data on its end after
removing the original entry from the file system. However the inode
can aand does live beyond that point and it is possible that some of
the fs call back functions will be invoked after the reference has
been put, which results in a race between freeing the data and
accessing it through the fs.
While the rawdata/loaddata is the most likely candidate to fail the
race, as it has the fewest references. If properly crafted it might be
possible to trigger a race for the other types stored in i_private.
Fix this by moving the put of i_private referenced data to the correct
place which is during inode eviction. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: cfm: Fix race condition in peer_mep deletion
When a peer MEP is being deleted, cancel_delayed_work_sync() is called
on ccm_rx_dwork before freeing. However, br_cfm_frame_rx() runs in
softirq context under rcu_read_lock (without RTNL) and can re-schedule
ccm_rx_dwork via ccm_rx_timer_start() between cancel_delayed_work_sync()
returning and kfree_rcu() being called.
The following is a simple race scenario:
cpu0 cpu1
mep_delete_implementation()
cancel_delayed_work_sync(ccm_rx_dwork);
br_cfm_frame_rx()
// peer_mep still in hlist
if (peer_mep->ccm_defect)
ccm_rx_timer_start()
queue_delayed_work(ccm_rx_dwork)
hlist_del_rcu(&peer_mep->head);
kfree_rcu(peer_mep, rcu);
ccm_rx_work_expired()
// on freed peer_mep
To prevent this, cancel_delayed_work_sync() is replaced with
disable_delayed_work_sync() in both peer MEP deletion paths, so
that subsequent queue_delayed_work() calls from br_cfm_frame_rx()
are silently rejected.
The cc_peer_disable() helper retains cancel_delayed_work_sync()
because it is also used for the CC enable/disable toggle path where
the work must remain re-schedulable. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: release flowtable after rcu grace period on error
Call synchronize_rcu() after unregistering the hooks from error path,
since a hook that already refers to this flowtable can be already
registered, exposing this flowtable to packet path and nfnetlink_hook
control plane.
This error path is rare, it should only happen by reaching the maximum
number hooks or by failing to set up to hardware offload, just call
synchronize_rcu().
There is a check for already used device hooks by different flowtable
that could result in EEXIST at this late stage. The hook parser can be
updated to perform this check earlier to this error path really becomes
rarely exercised.
Uncovered by KASAN reported as use-after-free from nfnetlink_hook path
when dumping hooks. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo: split gc into unlink and reclaim phase
Yiming Qian reports Use-after-free in the pipapo set type:
Under a large number of expired elements, commit-time GC can run for a very
long time in a non-preemptible context, triggering soft lockup warnings and
RCU stall reports (local denial of service).
We must split GC in an unlink and a reclaim phase.
We cannot queue elements for freeing until pointers have been swapped.
Expired elements are still exposed to both the packet path and userspace
dumpers via the live copy of the data structure.
call_rcu() does not protect us: dump operations or element lookups starting
after call_rcu has fired can still observe the free'd element, unless the
commit phase has made enough progress to swap the clone and live pointers
before any new reader has picked up the old version.
This a similar approach as done recently for the rbtree backend in commit
35f83a75529a ("netfilter: nft_set_rbtree: don't gc elements on insert"). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: cancel rfkill_block work in wiphy_unregister()
There is a use-after-free error in cfg80211_shutdown_all_interfaces found
by syzkaller:
BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220
Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326
CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events cfg80211_rfkill_block_work
Call Trace:
<TASK>
dump_stack_lvl+0x116/0x1f0
print_report+0xcd/0x630
kasan_report+0xe0/0x110
cfg80211_shutdown_all_interfaces+0x213/0x220
cfg80211_rfkill_block_work+0x1e/0x30
process_one_work+0x9cf/0x1b70
worker_thread+0x6c8/0xf10
kthread+0x3c5/0x780
ret_from_fork+0x56d/0x700
ret_from_fork_asm+0x1a/0x30
</TASK>
The problem arises due to the rfkill_block work is not cancelled when wiphy
is being unregistered. In order to fix the issue cancel the corresponding
work in wiphy_unregister().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| OpenClaw before 2026.3.12 automatically discovers and loads plugins from .OpenClaw/extensions/ without explicit trust verification, allowing arbitrary code execution. Attackers can execute malicious code by including crafted workspace plugins in cloned repositories that execute when users run OpenClaw from the directory. |
| OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From version 3.4.0 to before version 3.4.8, sensitive information from heap memory may be leaked through the decoded pixel data (information disclosure). This occurs under default settings; simply reading a malicious EXR file is sufficient to trigger the issue, without any user interaction. This issue has been patched in version 3.4.8. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.24.2, a double-free vulnerability in kerberos_AcceptSecurityContext() and kerberos_InitializeSecurityContextA() (WinPR, winpr/libwinpr/sspi/Kerberos/kerberos.c) can cause a crash in any FreeRDP clients on systems where Kerberos and/or Kerberos U2U is configured (Samba AD member, or krb5 for NFS). The crash is triggered during NLA connection teardown and requires a failed authentication attempt. This issue has been patched in version 3.24.2. |
| Use after free in Dawn in Google Chrome prior to 146.0.7680.178 allowed a remote attacker who had compromised the renderer process to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) |
| Use after free in PDF in Google Chrome prior to 146.0.7680.178 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted PDF file. (Chromium security severity: High) |
| Use after free in CSS in Google Chrome prior to 146.0.7680.178 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in WebGL in Google Chrome prior to 146.0.7680.178 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Web MIDI in Google Chrome on Android prior to 146.0.7680.178 allowed a remote attacker to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) |
| Use after free in WebCodecs in Google Chrome prior to 146.0.7680.178 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Dawn in Google Chrome prior to 146.0.7680.178 allowed a remote attacker who had compromised the renderer process to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Dawn in Google Chrome prior to 146.0.7680.178 allowed a remote attacker to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) |
| FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.211, host header manipulation in FreeScout version (http://localhost:8080/system/status) allows an attacker to inject an arbitrary domain into generated absolute URLs. This leads to External Resource Loading and Open Redirect behavior. When the application constructs links and assets using the unvalidated Host header, user requests can be redirected to attacker-controlled domains and external resources may be loaded from malicious servers. This issue has been patched in version 1.8.211. |
| Deserialization of Untrusted Data vulnerability in Crocoblock JetEngine jet-engine allows Code Injection.This issue affects JetEngine: from n/a through <= 3.7.0. |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in NasaTheme Nasa Core nasa-core allows PHP Local File Inclusion.This issue affects Nasa Core: from n/a through < 6.4.4. |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in themifyme Themify Builder themify-builder allows PHP Local File Inclusion.This issue affects Themify Builder: from n/a through <= 7.6.3. |
