Export limit exceeded: 352000 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (352000 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43472 | 1 Linux | 1 Linux Kernel | 2026-05-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: unshare: fix unshare_fs() handling There's an unpleasant corner case in unshare(2), when we have a CLONE_NEWNS in flags and current->fs hadn't been shared at all; in that case copy_mnt_ns() gets passed current->fs instead of a private copy, which causes interesting warts in proof of correctness] > I guess if private means fs->users == 1, the condition could still be true. Unfortunately, it's worse than just a convoluted proof of correctness. Consider the case when we have CLONE_NEWCGROUP in addition to CLONE_NEWNS (and current->fs->users == 1). We pass current->fs to copy_mnt_ns(), all right. Suppose it succeeds and flips current->fs->{pwd,root} to corresponding locations in the new namespace. Now we proceed to copy_cgroup_ns(), which fails (e.g. with -ENOMEM). We call put_mnt_ns() on the namespace created by copy_mnt_ns(), it's destroyed and its mount tree is dissolved, but... current->fs->root and current->fs->pwd are both left pointing to now detached mounts. They are pinning those, so it's not a UAF, but it leaves the calling process with unshare(2) failing with -ENOMEM _and_ leaving it with pwd and root on detached isolated mounts. The last part is clearly a bug. There is other fun related to that mess (races with pivot_root(), including the one between pivot_root() and fork(), of all things), but this one is easy to isolate and fix - treat CLONE_NEWNS as "allocate a new fs_struct even if it hadn't been shared in the first place". Sure, we could go for something like "if both CLONE_NEWNS *and* one of the things that might end up failing after copy_mnt_ns() call in create_new_namespaces() are set, force allocation of new fs_struct", but let's keep it simple - the cost of copy_fs_struct() is trivial. Another benefit is that copy_mnt_ns() with CLONE_NEWNS *always* gets a freshly allocated fs_struct, yet to be attached to anything. That seriously simplifies the analysis... FWIW, that bug had been there since the introduction of unshare(2) ;-/ | ||||
| CVE-2026-43497 | 1 Linux | 1 Linux Kernel | 2026-05-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: udlfb: add vm_ops to dlfb_ops_mmap to prevent use-after-free dlfb_ops_mmap() uses remap_pfn_range() to map vmalloc framebuffer pages to userspace but sets no vm_ops on the VMA. This means the kernel cannot track active mmaps. When dlfb_realloc_framebuffer() replaces the backing buffer via FBIOPUT_VSCREENINFO, existing mmap PTEs are not invalidated. On USB disconnect, dlfb_ops_destroy() calls vfree() on the old pages while userspace PTEs still reference them, resulting in a use-after-free: the process retains read/write access to freed kernel pages. Add vm_operations_struct with open/close callbacks that maintain an atomic mmap_count on struct dlfb_data. In dlfb_realloc_framebuffer(), check mmap_count and return -EBUSY if the buffer is currently mapped, preventing buffer replacement while userspace holds stale PTEs. Tested with PoC using dummy_hcd + raw_gadget USB device emulation. | ||||
| CVE-2026-43499 | 1 Linux | 1 Linux Kernel | 2026-05-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rtmutex: Use waiter::task instead of current in remove_waiter() remove_waiter() is used by the slowlock paths, but it is also used for proxy-lock rollback in rt_mutex_start_proxy_lock() when invoked from futex_requeue(). In the latter case waiter::task is not current, but remove_waiter() operates on current for the dequeue operation. That results in several problems: 1) the rbtree dequeue happens without waiter::task::pi_lock being held 2) the waiter task's pi_blocked_on state is not cleared, which leaves a dangling pointer primed for UAF around. 3) rt_mutex_adjust_prio_chain() operates on the wrong top priority waiter task Use waiter::task instead of current in all related operations in remove_waiter() to cure those problems. [ tglx: Fixup rt_mutex_adjust_prio_chain(), add a comment and amend the changelog ] | ||||
| CVE-2026-43501 | 1 Linux | 1 Linux Kernel | 2026-05-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: rpl: reserve mac_len headroom when recompressed SRH grows ipv6_rpl_srh_rcv() decompresses an RFC 6554 Source Routing Header, swaps the next segment into ipv6_hdr->daddr, recompresses, then pulls the old header and pushes the new one plus the IPv6 header back. The recompressed header can be larger than the received one when the swap reduces the common-prefix length the segments share with daddr (CmprI=0, CmprE>0, seg[0][0] != daddr[0] gives the maximum +8 bytes). pskb_expand_head() was gated on segments_left == 0, so on earlier segments the push consumed unchecked headroom. Once skb_push() leaves fewer than skb->mac_len bytes in front of data, skb_mac_header_rebuild()'s call to: skb_set_mac_header(skb, -skb->mac_len); will store (data - head) - mac_len into the u16 mac_header field, which wraps to ~65530, and the following memmove() writes mac_len bytes ~64KiB past skb->head. A single AF_INET6/SOCK_RAW/IPV6_HDRINCL packet over lo with a two segment type-3 SRH (CmprI=0, CmprE=15) reaches headroom 8 after one pass; KASAN reports a 14-byte OOB write in ipv6_rthdr_rcv. Fix this by expanding the head whenever the remaining room is less than the push size plus mac_len, and request that much extra so the rebuilt MAC header fits afterwards. | ||||
| CVE-2026-45252 | 1 Freebsd | 1 Freebsd | 2026-05-21 | 7.5 High |
| When a fusefs file system implements extended attributes, the kernel may send a FUSE_LISTXATTR message to the userspace daemon to retrieve the list of extended attributes for a given file. The FUSE protocol requires the daemon to return a packed list of NUL-terminated strings. The fusefs kernel module calls strlen() on this daemon-supplied buffer without first verifying that the entire list is NUL-terminated. If a malicious daemon sends a non-NUL-terminated list, the fusefs kernel module may read beyond the end of one heap-allocated buffer and potentially write beyond the end of a second buffer. A malicious daemon could disclose up to 253 bytes of kernel heap memory, or it could inject up to 250 attacker-controlled bytes into unallocated kernel heap space. | ||||
| CVE-2025-13479 | 2026-05-21 | 7.5 High | ||
| Authorization bypass through User-Controlled key vulnerability in PosCube Hardware Software and Consulting Ltd. QR Menu allows Exploitation of Trusted Identifiers. This issue affects QR Menu: through 21052026. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-2586 | 1 Eclipse | 1 Glassfish | 2026-05-21 | 9.1 Critical |
| An authenticated Remote Code Execution (RCE) vulnerability was identified in GlassFish's Administration Console. A user with access to the panel can send crafted requests that allow the execution of arbitrary operating system commands with the privileges of the application service user. | ||||
| CVE-2026-2587 | 1 Eclipse | 1 Glassfish | 2026-05-21 | 9.6 Critical |
| A critical Remote Code Execution (RCE) vulnerability was identified in the server-side template rendering mechanism used by the Glassfish gadget handler. The application processes .xml files and evaluates user-supplied values within a context where Expression Language (EL) “expressions” are processed without proper sanitization or escaping. By injecting expressions such as #{7*7}, the server returns 49, confirming server-side EL evaluation. This issue allows a remote attacker to fully compromise the underlying host, enabling capabilities as reading/modifying data, executing arbitrary commands, persistence, and lateral movement. | ||||
| CVE-2026-43473 | 1 Linux | 1 Linux Kernel | 2026-05-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Add NULL checks when resetting request and reply queues The driver encountered a crash during resource cleanup when the reply and request queues were NULL due to freed memory. This issue occurred when the creation of reply or request queues failed, and the driver freed the memory first, but attempted to mem set the content of the freed memory, leading to a system crash. Add NULL pointer checks for reply and request queues before accessing the reply/request memory during cleanup | ||||
| CVE-2026-43474 | 1 Linux | 1 Linux Kernel | 2026-05-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs: init flags_valid before calling vfs_fileattr_get syzbot reported a uninit-value bug in [1]. Similar to the "*get" context where the kernel's internal file_kattr structure is initialized before calling vfs_fileattr_get(), we should use the same mechanism when using fa. [1] BUG: KMSAN: uninit-value in fuse_fileattr_get+0xeb4/0x1450 fs/fuse/ioctl.c:517 fuse_fileattr_get+0xeb4/0x1450 fs/fuse/ioctl.c:517 vfs_fileattr_get fs/file_attr.c:94 [inline] __do_sys_file_getattr fs/file_attr.c:416 [inline] Local variable fa.i created at: __do_sys_file_getattr fs/file_attr.c:380 [inline] __se_sys_file_getattr+0x8c/0xbd0 fs/file_attr.c:372 | ||||
| CVE-2026-43475 | 1 Linux | 1 Linux Kernel | 2026-05-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: storvsc: Fix scheduling while atomic on PREEMPT_RT This resolves the follow splat and lock-up when running with PREEMPT_RT enabled on Hyper-V: [ 415.140818] BUG: scheduling while atomic: stress-ng-iomix/1048/0x00000002 [ 415.140822] INFO: lockdep is turned off. [ 415.140823] Modules linked in: intel_rapl_msr intel_rapl_common intel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_discovery pmt_class intel_pmc_ssram_telemetry intel_vsec ghash_clmulni_intel aesni_intel rapl binfmt_misc nls_ascii nls_cp437 vfat fat snd_pcm hyperv_drm snd_timer drm_client_lib drm_shmem_helper snd sg soundcore drm_kms_helper pcspkr hv_balloon hv_utils evdev joydev drm configfs efi_pstore nfnetlink vsock_loopback vmw_vsock_virtio_transport_common hv_sock vmw_vsock_vmci_transport vsock vmw_vmci efivarfs autofs4 ext4 crc16 mbcache jbd2 sr_mod sd_mod cdrom hv_storvsc serio_raw hid_generic scsi_transport_fc hid_hyperv scsi_mod hid hv_netvsc hyperv_keyboard scsi_common [ 415.140846] Preemption disabled at: [ 415.140847] [<ffffffffc0656171>] storvsc_queuecommand+0x2e1/0xbe0 [hv_storvsc] [ 415.140854] CPU: 8 UID: 0 PID: 1048 Comm: stress-ng-iomix Not tainted 6.19.0-rc7 #30 PREEMPT_{RT,(full)} [ 415.140856] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/04/2024 [ 415.140857] Call Trace: [ 415.140861] <TASK> [ 415.140861] ? storvsc_queuecommand+0x2e1/0xbe0 [hv_storvsc] [ 415.140863] dump_stack_lvl+0x91/0xb0 [ 415.140870] __schedule_bug+0x9c/0xc0 [ 415.140875] __schedule+0xdf6/0x1300 [ 415.140877] ? rtlock_slowlock_locked+0x56c/0x1980 [ 415.140879] ? rcu_is_watching+0x12/0x60 [ 415.140883] schedule_rtlock+0x21/0x40 [ 415.140885] rtlock_slowlock_locked+0x502/0x1980 [ 415.140891] rt_spin_lock+0x89/0x1e0 [ 415.140893] hv_ringbuffer_write+0x87/0x2a0 [ 415.140899] vmbus_sendpacket_mpb_desc+0xb6/0xe0 [ 415.140900] ? rcu_is_watching+0x12/0x60 [ 415.140902] storvsc_queuecommand+0x669/0xbe0 [hv_storvsc] [ 415.140904] ? HARDIRQ_verbose+0x10/0x10 [ 415.140908] ? __rq_qos_issue+0x28/0x40 [ 415.140911] scsi_queue_rq+0x760/0xd80 [scsi_mod] [ 415.140926] __blk_mq_issue_directly+0x4a/0xc0 [ 415.140928] blk_mq_issue_direct+0x87/0x2b0 [ 415.140931] blk_mq_dispatch_queue_requests+0x120/0x440 [ 415.140933] blk_mq_flush_plug_list+0x7a/0x1a0 [ 415.140935] __blk_flush_plug+0xf4/0x150 [ 415.140940] __submit_bio+0x2b2/0x5c0 [ 415.140944] ? submit_bio_noacct_nocheck+0x272/0x360 [ 415.140946] submit_bio_noacct_nocheck+0x272/0x360 [ 415.140951] ext4_read_bh_lock+0x3e/0x60 [ext4] [ 415.140995] ext4_block_write_begin+0x396/0x650 [ext4] [ 415.141018] ? __pfx_ext4_da_get_block_prep+0x10/0x10 [ext4] [ 415.141038] ext4_da_write_begin+0x1c4/0x350 [ext4] [ 415.141060] generic_perform_write+0x14e/0x2c0 [ 415.141065] ext4_buffered_write_iter+0x6b/0x120 [ext4] [ 415.141083] vfs_write+0x2ca/0x570 [ 415.141087] ksys_write+0x76/0xf0 [ 415.141089] do_syscall_64+0x99/0x1490 [ 415.141093] ? rcu_is_watching+0x12/0x60 [ 415.141095] ? finish_task_switch.isra.0+0xdf/0x3d0 [ 415.141097] ? rcu_is_watching+0x12/0x60 [ 415.141098] ? lock_release+0x1f0/0x2a0 [ 415.141100] ? rcu_is_watching+0x12/0x60 [ 415.141101] ? finish_task_switch.isra.0+0xe4/0x3d0 [ 415.141103] ? rcu_is_watching+0x12/0x60 [ 415.141104] ? __schedule+0xb34/0x1300 [ 415.141106] ? hrtimer_try_to_cancel+0x1d/0x170 [ 415.141109] ? do_nanosleep+0x8b/0x160 [ 415.141111] ? hrtimer_nanosleep+0x89/0x100 [ 415.141114] ? __pfx_hrtimer_wakeup+0x10/0x10 [ 415.141116] ? xfd_validate_state+0x26/0x90 [ 415.141118] ? rcu_is_watching+0x12/0x60 [ 415.141120] ? do_syscall_64+0x1e0/0x1490 [ 415.141121] ? do_syscall_64+0x1e0/0x1490 [ 415.141123] ? rcu_is_watching+0x12/0x60 [ 415.141124] ? do_syscall_64+0x1e0/0x1490 [ 415.141125] ? do_syscall_64+0x1e0/0x1490 [ 415.141127] ? irqentry_exit+0x140/0 ---truncated--- | ||||
| CVE-2026-22614 | 1 Eaton | 1 Easysoft | 2026-05-21 | 6.1 Medium |
| The encryption mechanism used in Eaton's EasySoft project file was insecure and susceptible to brute force attacks, an attacker with access to this file and the local host machine could potentially read the sensitive information stored and tamper with the project file. This security issue has been fixed in the latest version of Eaton EasySoft which is available on the Eaton download centre. | ||||
| CVE-2026-45208 | 1 Trendmicro | 2 Apexone Op, Apexone Saas | 2026-05-21 | 7.8 High |
| A time-of-check time-of-use vulnerability in the Apex One/SEP agent could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. | ||||
| CVE-2026-45207 | 1 Trendmicro | 2 Apexone Op, Apexone Saas | 2026-05-21 | 7.8 High |
| An origin validation vulnerability in the Apex One/SEP agent could allow a local attacker to escalate privileges on affected installations. This is similar to CVE-2026-45206 but exists in a different process protection communication mechanism. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. | ||||
| CVE-2026-45206 | 1 Trendmicro | 2 Apexone Op, Apexone Saas | 2026-05-21 | 7.8 High |
| An origin validation vulnerability in the Apex One/SEP agent could allow a local attacker to escalate privileges on affected installations. This is similar to CVE-2026-45207 but exists in a different process protection communication mechanism. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. | ||||
| CVE-2026-34930 | 1 Trendmicro | 2 Apexone Op, Apexone Saas | 2026-05-21 | 7.8 High |
| An origin validation vulnerability in the Apex One/SEP agent could allow a local attacker to escalate privileges on affected installations. This is similar to CVE-2026-34927 but exists in a different process protection mechanism. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. | ||||
| CVE-2026-34929 | 1 Trendmicro | 2 Apexone Op, Apexone Saas | 2026-05-21 | 7.8 High |
| An origin validation vulnerability in the Apex One/SEP agent could allow a local attacker to escalate privileges on affected installations. This is similar to CVE-2026-34927 but exists in a different inter-process communication mechanism. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. | ||||
| CVE-2026-34928 | 1 Trendmicro | 2 Apexone Op, Apexone Saas | 2026-05-21 | 7.8 High |
| An origin validation vulnerability in the Apex One/SEP agent could allow a local attacker to escalate privileges on affected installations. This is similar to CVE-2026-34927 but exists in a different named pipe communication mechanism. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. | ||||
| CVE-2026-34927 | 1 Trendmicro | 2 Apexone Op, Apexone Saas | 2026-05-21 | 7.8 High |
| An origin validation vulnerability in the Apex One/SEP agent could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. | ||||
| CVE-2026-8631 | 2 Hp, Hp Inc | 2 Linux Imaging And Printing, Hp Linux Imaging And Printing Software | 2026-05-21 | N/A |
| A potential security vulnerability has been identified in the HP Linux Imaging and Printing Software. This potential vulnerability may allow escalation of privileges and/or arbitrary code execution via an integer overflow in the hpcups processing path when handling crafted print data. | ||||