Export limit exceeded: 379067 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 379067 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (379067 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72152 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tpm: tpm_tis_spi: Use wait_woken() in wait_for_tmp_stat() wait_event_interruptible_timeout() evaluates its condition after setting the current task state to TASK_INTERRUPTIBLE. With CONFIG_DEBUG_ATOMIC_SLEEP this triggers a warning when the IRQ wait path is used: tpm_tis_status() tpm_tis_spi_read_bytes() tpm_tis_spi_transfer_full() spi_bus_lock() mutex_lock() Address this with the following measures: 1. Call wait_tpm_stat_cond() only while tasking is running. 2. Use wait_woken() to wait for changes. | ||||
| CVE-2026-72153 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/crossbar: Use correct index in crossbar_domain_free() crossbar_domain_free() resets the domain data and then uses the nulled out irq_data->hwirq member as index to reset the irq_map[] entry and to write the relevant crossbar register with a safe entry. That means it never frees the correct index and keeps the crossbar register connection to the source interrupt active. If it would not reset the domain data, then this would be even worse as irq_data->hwirq holds the source interrupt number, but both the map and register index need the corresponding GIC SPI number and not the source interrupt number. This might even result in an out of bounds access as the source interrupt number can be higher than the maximal index space. Fix this by using the GIC SPI index from the parent domain's irq_data. | ||||
| CVE-2026-72156 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header() mpf_ops_parse_header() reads header_size from the bitstream at MPF_HEADER_SIZE_OFFSET (24). When header_size is zero, the expression *(buf + header_size - 1) reads one byte before the buffer start. Since initial_header_size is set to 71 in mpf_ops, the fpga-mgr core guarantees the buffer is large enough to reach MPF_HEADER_SIZE_OFFSET. The only real gap is the zero header_size case, which cannot be resolved by providing a larger buffer, so return -EINVAL. | ||||
| CVE-2026-72159 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject non-inline dinodes with i_size and zero i_clusters On a volume mounted without OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC, a non-inline regular file with non-zero i_size and zero i_clusters is structurally malformed: the extent map declares no allocated clusters yet the size header claims content exists. Keep rejecting that shape, but express it through a shared predicate so the same invariant is available to normal inode reads and online filecheck. The same zero-cluster shape is also malformed for non-inline directories. ocfs2 directory growth allocates backing storage before advancing i_size, and ocfs2_dir_foreach_blk_el() later walks until ctx->pos reaches i_size_read(inode). A forged directory dinode with a huge i_size and no clusters would repeatedly fail on holes while advancing through the claimed size. Sparse regular files remain exempt: on sparse-alloc volumes, truncate can legitimately grow i_size without allocating clusters. System inodes and inline-data dinodes also retain their separate storage rules. Mirror the check in ocfs2_filecheck_validate_inode_block() as well. filecheck reports through its own error namespace, so malformed size/cluster state is logged as a filecheck invalid-inode result rather than via ocfs2_error(), but it must not proceed into ocfs2_populate_inode(). | ||||
| CVE-2026-72230 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: frag: free unfragmentable packet The caller of batadv_frag_send_packet() assume that the skb provided to the function are always consumed. But the pre-check for an empty payload or the zero fragment size returned an error without any further actions. A failed pre-check must use the same error handling code as the rest of the function. | ||||
| CVE-2026-72166 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/9p: fix infinite loop in p9_client_rpc on fatal signal When p9_client_rpc() is called with type P9_TFLUSH and the transport has no peer (e.g. fd transport backed by pipes with no 9p server), a fatal signal causes an infinite loop: again: err = io_wait_event_killable(req->wq, ...) /* SIGKILL wakes the task, returns -ERESTARTSYS */ if (err == -ERESTARTSYS && c->status == Connected && type == P9_TFLUSH) { sigpending = 1; clear_thread_flag(TIF_SIGPENDING); goto again; } clear_thread_flag() clears TIF_SIGPENDING before jumping back to io_wait_event_killable(). signal_pending_state() checks TIF_SIGPENDING, finds it zero, and the task goes to sleep again. The task can only wake on the next signal delivery that calls signal_wake_up() and sets TIF_SIGPENDING again. When that happens the loop repeats, clears TIF_SIGPENDING, and sleeps again indefinitely. This is triggered in practice by coredump_wait(): when a thread in a multi-threaded process causes a coredump (e.g. via SIGSYS from Syscall User Dispatch), coredump_wait() sends SIGKILL to all other threads and waits for them to call mm_release(). If one of those threads is blocked in p9_client_rpc() over an fd transport with no peer, it enters the P9_TFLUSH loop and never calls mm_release(), so coredump_wait() stalls forever: INFO: task syz.0.18:676 blocked for more than 143 seconds. Not tainted 6.12.77+ #1 task:syz.0.18 state:D stack:27600 pid:676 tgid:673 ppid:630 flags:0x00000004 Call Trace: <TASK> context_switch kernel/sched/core.c:5344 [inline] __schedule+0xcb4/0x5d50 kernel/sched/core.c:6724 __schedule_loop kernel/sched/core.c:6801 [inline] schedule+0xe5/0x350 kernel/sched/core.c:6816 schedule_timeout+0x253/0x290 kernel/time/timer.c:2593 do_wait_for_common kernel/sched/completion.c:95 [inline] __wait_for_common+0x409/0x600 kernel/sched/completion.c:116 wait_for_common kernel/sched/completion.c:127 [inline] wait_for_completion_state+0x1d/0x40 kernel/sched/completion.c:264 coredump_wait fs/coredump.c:448 [inline] do_coredump+0x854/0x4350 fs/coredump.c:629 get_signal+0x1425/0x2730 kernel/signal.c:2903 arch_do_signal_or_restart+0x81/0x880 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0xf9/0x160 kernel/entry/common.c:218 do_syscall_64+0x102/0x220 arch/x86/entry/common.c:84 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Fix: check fatal_signal_pending() before clearing TIF_SIGPENDING in the P9_TFLUSH retry loop. At that point TIF_SIGPENDING is still set, so fatal_signal_pending() works correctly. If a fatal signal is pending, jump to recalc_sigpending to restore TIF_SIGPENDING and return -ERESTARTSYS to the caller. The same defect is present in stable kernels back to 5.4. On those kernels the infinite loop is broken earlier by a second SIGKILL from the parent process (e.g. kill_and_wait() retrying after a timeout), resulting in a zombie process and a shutdown delay rather than a permanent D-state hang, but the underlying flaw is the same. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2026-72177 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: fix dir put orders in access_pattern_add_dirs() Patch series "mm/damon/sysfs-schemes: fix wrong directories put orders in error paths". Error paths of damon_sysfs_access_pattern_add_dirs() and damon_sysfs_scheme_add_dirs() functions put references to directories in wrong orders. As a result, uninitialized memory dereference and/or memory leak can happen. Fix those. This patch (of 2): In access_pattern_add_dirs(), error handling path puts references starting from setup failed directories. If the failure happpened from the initial allication in the setup functions, uninitialized memory dereference happen. The allocation failures will not commonly happen, but the consequence is quite bad. Fix the wrong reference put orders. The issue was discovered [1] by Sashiko. | ||||
| CVE-2026-72140 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: mlxbf: Fix use-after-free in mlxbf_i2c_init_resource() If devm_platform_get_and_ioremap_resource() returns an error, mlxbf_i2c_init_resource() frees tmp_res before reading tmp_res->io to get the error code. This results in a use-after-free. Save the error code before freeing tmp_res. | ||||
| CVE-2026-72092 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: reject command submission on devices without a submit op amdxdna_cmd_submit() calls xdna->dev_info->ops->cmd_submit() unconditionally, but only aie2_dev_ops defines that callback. aie4_vf_ops (the AIE4 SR-IOV virtual function) does not, so a user AMDXDNA_EXEC_CMD ioctl on an AIE4 device reaches a NULL function-pointer call and oopses the kernel. AIE4 submits work through a mapped user queue and doorbell, not this ioctl path. Reject the submission early with -EOPNOTSUPP when the device provides no cmd_submit op, so the shared EXEC ioctl is a clean no-op on such devices. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-74422 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: inno-hdmi: Switch to drmm_kzalloc() Driver makes use of drmm_encoder_init() to initialize the encoder and automatically handle the cleanup by registering drm_encoder_cleanup() with drmm_add_action(). However, the internal structure containing the encoder part gets allocated with devm_kzalloc(), which happens while component_bind_all() is being called from Rockchip DRM driver. The component framework further ensures it is deallocated as part of releasing all the resources claimed during bind, which is triggered from component_unbind_all(). When the reference to the DRM device gets eventually dropped via drm_dev_put() in rockchip_drm_unbind(), drmm_encoder_alloc_release() attempts to access the now released encoder structure, leading to use-after-free. Ensure driver's internal structure is still reachable on encoder cleanup by switching from a device-managed allocation to a drm-managed one. | ||||
| CVE-2026-74402 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-sha204a - fix blocking and non-blocking rng logic The blocking and non-blocking paths were failing to provide valid entropy due to improper buffer management. Reading the buffer starting from byte 1, only fetch the 32 bytes of random data from the return message. Tested on an Atmel SHA204A device. Before (here for blocking), tests showed repeatedly reading reduced bytes. $ head -c 32 /dev/hwrng | hexdump -C 00000000 02 28 85 b3 47 40 f2 ee 00 00 00 00 00 00 00 00 |.(..G@..........| 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000020 After, the result will be similar to the following: $ head -c 32 /dev/hwrng | hexdump -C 00000000 5a fc 3f 13 14 68 fe 06 68 0a bd 04 83 6e 09 69 |Z.?..h..h....n.i| 00000010 75 ff cf 87 10 84 3b c9 c1 df ae eb 45 53 4c c3 |u.....;.....ESL.| 00000020 | ||||
| CVE-2026-74375 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: fix deadlock in read error recovery path raid1d and raid10d may resubmit a split md cloned bio while handling a read error. In this case, resubmitting the bio can lead to a deadlock if the array is suspended before md_handle_request() acquires an active_io reference via percpu_ref_tryget_live(). Since the cloned bio already holds an active_io reference, trying to acquire another reference via percpu_ref_tryget_live() can lead to a deadlock while the array is suspended. Fix this by using percpu_ref_get() for md cloned bios. | ||||
| CVE-2026-74366 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix NULL deref in change_sta_links for unready link _ieee80211_set_active_links() calls _ieee80211_link_use_channel() for each newly-added link and WARN_ON_ONCE()s if it fails. The call uses assign_on_failure=true, which allows mac80211 to continue despite driver failures, but when a mac80211-level channel validation fails (e.g., combinations check, DFS, or no available radio), drv_assign_vif_chanctx() is never reached. Since ath12k_mac_vdev_create() is only called from that path, arvif->is_created remains false and arvif->ar remains NULL for the failed link. The subsequent drv_change_sta_links() call reaches ath12k_mac_op_change_sta_links(), which allocates an arsta and sets ahsta->links_map |= BIT(link_id) for the broken link before checking whether the link is ready. When the vdev was never created, only station_add() is skipped, but the link remains in links_map. Any subsequent operation iterating links_map and dereferencing arvif->ar without a NULL check will crash. Two observed examples are NULL deref in ath12k_mac_ml_station_remove() on disconnect and in ath12k_mac_op_set_key() when wpa_supplicant installs PTK keys. BUG: Unable to handle kernel NULL pointer dereference at 0x00000000 pc : ath12k_mac_station_post_remove+0x40/0xe8 [ath12k] Call trace: ath12k_mac_station_post_remove+0x40/0xe8 [ath12k] ath12k_mac_op_sta_state+0xb60/0x1720 [ath12k] drv_sta_state+0x100/0xbd8 [mac80211] __sta_info_destroy_part2+0x148/0x178 [mac80211] ieee80211_set_disassoc+0x500/0x678 [mac80211] BUG: Unable to handle kernel NULL pointer dereference at 0x00000000 pc : ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k] Call trace: ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k] drv_set_key+0x70/0x100 [mac80211] ieee80211_key_enable_hw_accel+0x78/0x260 [mac80211] ieee80211_add_key+0x16c/0x2ac [mac80211] nl80211_new_key+0x138/0x280 [cfg80211] Fix this by checking arvif->is_created before calling ath12k_mac_alloc_assign_link_sta(). This prevents the broken link from entering links_map, so all subsequent operations iterating the bitmap are protected. The reliability of arvif->is_created across all error paths is ensured by the preceding patch. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | ||||
| CVE-2026-74337 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NMI/tracepoint re-entry deadlock on lru locks NMI and tracepoint BPF programs can re-enter the per-CPU or global LRU lock that bpf_lru_pop_free()/push_free() already hold on the same CPU, AA-deadlocking. Lockdep reports "inconsistent {INITIAL USE} -> {IN-NMI}" on &l->lock (syzbot c69a0a2c816716f1e0d5) and "possible recursive locking detected" on &loc_l->lock (syzbot 18b26edb69b2e19f3b33). Prior trylock and rqspinlock based fixes (see links) were nacked because compromised on reliability. This patch converts every LRU lock site to rqspinlock_t and adds a recovery path for some failure windows to avoid node leaks. Failure recovery: - *_pop_free top-level: return NULL; prealloc_lru_pop() already treats that as no-free-element (-ENOMEM). - Cross-CPU steal: skip the victim's locked loc_l, try next CPU. - Post-steal local lock fail: publish stolen node to lockless per-CPU free_llist; next pop on this CPU picks it up. - push_free fail: mark node pending_free=1. __local_list_flush(), __local_list_pop_pending() reclaim the node from pending_list. __bpf_lru_list_shrink_inactive() reclaims the node from inactive list. Nodes from active list are reclaimed by __bpf_lru_list_shrink() or after __bpf_lru_list_rotate_active() demotes it to the inactive. | ||||
| CVE-2026-74331 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Fix recursive lock in device_cache_fw_images() A recursive locking deadlock can occur in the firmware loader's power management notification handler. During system suspend or hibernation preparation, fw_pm_notify() calls device_cache_fw_images(). This function acquires fw_lock to set the firmware cache state to FW_LOADER_START_CACHE and then iterates over all devices using dpm_for_each_dev() while still holding the lock. For each device, dev_cache_fw_image() schedules asynchronous work to cache the firmware. If memory allocation for the async work entry fails (e.g., in out-of-memory conditions), async_schedule_node_domain() falls back to executing the work function synchronously in the current thread. The synchronous execution path (__async_dev_cache_fw_image() -> cache_firmware() -> request_firmware() -> assign_fw()) attempts to acquire fw_lock again. Since the current thread already holds fw_lock, this results in a recursive locking deadlock. Fix this by releasing fw_lock immediately after updating the cache state and before calling dpm_for_each_dev(). The lock is only needed to protect the state update. Concurrent firmware requests will correctly see the FW_LOADER_START_CACHE state and use the piggyback mechanism, which is independently protected by its own fwc->name_lock. | ||||
| CVE-2026-74290 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flow: Dont expose folded kernel pointers The flow classifier falls back to addr_fold() for fields that are missing from packet headers. In map mode, userspace controls mask, xor, rshift, addend and divisor, and can observe the resulting classid through class statistics. This allows a tc classifier in a user/network namespace to recover the 32-bit folded value of skb->sk, skb_dst() or skb_nfct(). Align with standard kernel practices for pointer hashing and replace the XOR folding with a keyed siphash (which is cryptographically secure) | ||||
| CVE-2026-72498 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Avoid displaying the kernel pointer While dumping the info on MR using the rdma tool, we dump the mr_hwq which is a kernel pointer. There is no need to expose this value for end user. So avoid it. | ||||
| CVE-2026-72484 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: most: video: avoid double free on video register failure comp_register_videodev() allocates a video_device with video_device_alloc() and releases it if video_register_device() fails. This can double free the video_device when __video_register_device() reaches device_register() and that call fails: video_register_device() -> __video_register_device() -> device_register() fails -> put_device(&vdev->dev) -> v4l2_device_release() -> vdev->release(vdev) -> video_device_release(vdev) comp_register_videodev() -> video_device_release(mdev->vdev) Use video_device_release_empty() while registering the device so that registration failure paths do not free mdev->vdev through vdev->release(). comp_register_videodev() then releases mdev->vdev exactly once on failure. Restore video_device_release() after successful registration so the registered device keeps its normal lifetime handling. This issue was found by a static analysis tool I am developing. | ||||
| CVE-2026-72467 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Check frwr_wp_create() during connect frwr_wp_create() creates the singleton Memory Region used to encode padding for Write chunks whose payload length is not XDR-aligned. Its failure paths return a negative errno and leave ep->re_write_pad_mr set to NULL. rpcrdma_xprt_connect() currently ignores that return value. If frwr_wp_create() fails after the rest of the connection setup succeeds, xprt_rdma_connect_worker() treats the connection attempt as successful and sets XPRT_CONNECTED. A later NFS/RDMA read with a non-4-byte-aligned receive page length reaches rpcrdma_encode_write_list(), passes the NULL write-pad MR to encode_rdma_segment(), and dereferences it. This is locally triggerable on an NFS/RDMA client after a connect or reconnect hits a local MR allocation, DMA-map, MR-map, or post-send failure; a remote peer alone cannot force the local MR setup failure. Check the return value and fail the connect as -ENOTCONN, matching the adjacent setup failures. This keeps XPRT_CONNECTED clear and lets the normal reconnect path retry. | ||||
| CVE-2026-72386 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix a leak when a group is evicted before the tiler OOM is serviced A group ref is tied to the pending tiler_oom_work, so we need to release it if the cancel was effective. | ||||