Export limit exceeded: 346260 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (346260 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31440 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix leaking event log memory During the device remove process, the device is reset, causing the configuration registers to go back to their default state, which is zero. As the driver is checking if the event log support was enabled before deallocating, it will fail if a reset happened before. Do not check if the support was enabled, the check for 'idxd->evl' being valid (only allocated if the HW capability is available) is enough. | ||||
| CVE-2026-31444 | 1 Linux | 1 Linux Kernel | 2026-04-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free and NULL deref in smb_grant_oplock() smb_grant_oplock() has two issues in the oplock publication sequence: 1) opinfo is linked into ci->m_op_list (via opinfo_add) before add_lease_global_list() is called. If add_lease_global_list() fails (kmalloc returns NULL), the error path frees the opinfo via __free_opinfo() while it is still linked in ci->m_op_list. Concurrent m_op_list readers (opinfo_get_list, or direct iteration in smb_break_all_levII_oplock) dereference the freed node. 2) opinfo->o_fp is assigned after add_lease_global_list() publishes the opinfo on the global lease list. A concurrent find_same_lease_key() can walk the lease list and dereference opinfo->o_fp->f_ci while o_fp is still NULL. Fix by restructuring the publication sequence to eliminate post-publish failure: - Set opinfo->o_fp before any list publication (fixes NULL deref). - Preallocate lease_table via alloc_lease_table() before opinfo_add() so add_lease_global_list() becomes infallible after publication. - Keep the original m_op_list publication order (opinfo_add before lease list) so concurrent opens via same_client_has_lease() and opinfo_get_list() still see the in-flight grant. - Use opinfo_put() instead of __free_opinfo() on err_out so that the RCU-deferred free path is used. This also requires splitting add_lease_global_list() to take a preallocated lease_table and changing its return type from int to void, since it can no longer fail. | ||||
| CVE-2026-31445 | 1 Linux | 1 Linux Kernel | 2026-04-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: avoid use of half-online-committed context One major usage of damon_call() is online DAMON parameters update. It is done by calling damon_commit_ctx() inside the damon_call() callback function. damon_commit_ctx() can fail for two reasons: 1) invalid parameters and 2) internal memory allocation failures. In case of failures, the damon_ctx that attempted to be updated (commit destination) can be partially updated (or, corrupted from a perspective), and therefore shouldn't be used anymore. The function only ensures the damon_ctx object can safely deallocated using damon_destroy_ctx(). The API callers are, however, calling damon_commit_ctx() only after asserting the parameters are valid, to avoid damon_commit_ctx() fails due to invalid input parameters. But it can still theoretically fail if the internal memory allocation fails. In the case, DAMON may run with the partially updated damon_ctx. This can result in unexpected behaviors including even NULL pointer dereference in case of damos_commit_dests() failure [1]. Such allocation failure is arguably too small to fail, so the real world impact would be rare. But, given the bad consequence, this needs to be fixed. Avoid such partially-committed (maybe-corrupted) damon_ctx use by saving the damon_commit_ctx() failure on the damon_ctx object. For this, introduce damon_ctx->maybe_corrupted field. damon_commit_ctx() sets it when it is failed. kdamond_call() checks if the field is set after each damon_call_control->fn() is executed. If it is set, ignore remaining callback requests and return. All kdamond_call() callers including kdamond_fn() also check the maybe_corrupted field right after kdamond_call() invocations. If the field is set, break the kdamond_fn() main loop so that DAMON sill doesn't use the context that might be corrupted. [sj@kernel.org: let kdamond_call() with cancel regardless of maybe_corrupted] | ||||
| CVE-2026-31454 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: save ailp before dropping the AIL lock in push callbacks In xfs_inode_item_push() and xfs_qm_dquot_logitem_push(), the AIL lock is dropped to perform buffer IO. Once the cluster buffer no longer protects the log item from reclaim, the log item may be freed by background reclaim or the dquot shrinker. The subsequent spin_lock() call dereferences lip->li_ailp, which is a use-after-free. Fix this by saving the ailp pointer in a local variable while the AIL lock is held and the log item is guaranteed to be valid. | ||||
| CVE-2026-31455 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: stop reclaim before pushing AIL during unmount The unmount sequence in xfs_unmount_flush_inodes() pushed the AIL while background reclaim and inodegc are still running. This is broken independently of any use-after-free issues - background reclaim and inodegc should not be running while the AIL is being pushed during unmount, as inodegc can dirty and insert inodes into the AIL during the flush, and background reclaim can race to abort and free dirty inodes. Reorder xfs_unmount_flush_inodes() to stop inodegc and cancel background reclaim before pushing the AIL. Stop inodegc before cancelling m_reclaim_work because the inodegc worker can re-queue m_reclaim_work via xfs_inodegc_set_reclaimable. | ||||
| CVE-2026-31456 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/pagewalk: fix race between concurrent split and refault The splitting of a PUD entry in walk_pud_range() can race with a concurrent thread refaulting the PUD leaf entry causing it to try walking a PMD range that has disappeared. An example and reproduction of this is to try reading numa_maps of a process while VFIO-PCI is setting up DMA (specifically the vfio_pin_pages_remote call) on a large BAR for that process. This will trigger a kernel BUG: vfio-pci 0000:03:00.0: enabling device (0000 -> 0002) BUG: unable to handle page fault for address: ffffa23980000000 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI ... RIP: 0010:walk_pgd_range+0x3b5/0x7a0 Code: 8d 43 ff 48 89 44 24 28 4d 89 ce 4d 8d a7 00 00 20 00 48 8b 4c 24 28 49 81 e4 00 00 e0 ff 49 8d 44 24 ff 48 39 c8 4c 0f 43 e3 <49> f7 06 9f ff ff ff 75 3b 48 8b 44 24 20 48 8b 40 28 48 85 c0 74 RSP: 0018:ffffac23e1ecf808 EFLAGS: 00010287 RAX: 00007f44c01fffff RBX: 00007f4500000000 RCX: 00007f44ffffffff RDX: 0000000000000000 RSI: 000ffffffffff000 RDI: ffffffff93378fe0 RBP: ffffac23e1ecf918 R08: 0000000000000004 R09: ffffa23980000000 R10: 0000000000000020 R11: 0000000000000004 R12: 00007f44c0200000 R13: 00007f44c0000000 R14: ffffa23980000000 R15: 00007f44c0000000 FS: 00007fe884739580(0000) GS:ffff9b7d7a9c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa23980000000 CR3: 000000c0650e2005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> __walk_page_range+0x195/0x1b0 walk_page_vma+0x62/0xc0 show_numa_map+0x12b/0x3b0 seq_read_iter+0x297/0x440 seq_read+0x11d/0x140 vfs_read+0xc2/0x340 ksys_read+0x5f/0xe0 do_syscall_64+0x68/0x130 ? get_page_from_freelist+0x5c2/0x17e0 ? mas_store_prealloc+0x17e/0x360 ? vma_set_page_prot+0x4c/0xa0 ? __alloc_pages_noprof+0x14e/0x2d0 ? __mod_memcg_lruvec_state+0x8d/0x140 ? __lruvec_stat_mod_folio+0x76/0xb0 ? __folio_mod_stat+0x26/0x80 ? do_anonymous_page+0x705/0x900 ? __handle_mm_fault+0xa8d/0x1000 ? __count_memcg_events+0x53/0xf0 ? handle_mm_fault+0xa5/0x360 ? do_user_addr_fault+0x342/0x640 ? arch_exit_to_user_mode_prepare.constprop.0+0x16/0xa0 ? irqentry_exit_to_user_mode+0x24/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fe88464f47e Code: c0 e9 b6 fe ff ff 50 48 8d 3d be 07 0b 00 e8 69 01 02 00 66 0f 1f 84 00 00 00 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00 f0 ff ff 77 5a c3 66 0f 1f 84 00 00 00 00 00 48 83 ec 28 RSP: 002b:00007ffe6cd9a9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fe88464f47e RDX: 0000000000020000 RSI: 00007fe884543000 RDI: 0000000000000003 RBP: 00007fe884543000 R08: 00007fe884542010 R09: 0000000000000000 R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 </TASK> Fix this by validating the PUD entry in walk_pmd_range() using a stable snapshot (pudp_get()). If the PUD is not present or is a leaf, retry the walk via ACTION_AGAIN instead of descending further. This mirrors the retry logic in walk_pte_range(), which lets walk_pmd_range() retry if the PTE is not being got by pte_offset_map_lock(). | ||||
| CVE-2026-31457 | 1 Linux | 1 Linux Kernel | 2026-04-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: check contexts->nr in repeat_call_fn damon_sysfs_repeat_call_fn() calls damon_sysfs_upd_tuned_intervals(), damon_sysfs_upd_schemes_stats(), and damon_sysfs_upd_schemes_effective_quotas() without checking contexts->nr. If nr_contexts is set to 0 via sysfs while DAMON is running, these functions dereference contexts_arr[0] and cause a NULL pointer dereference. Add the missing check. For example, the issue can be reproduced using DAMON sysfs interface and DAMON user-space tool (damo) [1] like below. $ sudo damo start --refresh_interval 1s $ echo 0 | sudo tee \ /sys/kernel/mm/damon/admin/kdamonds/0/contexts/nr_contexts | ||||
| CVE-2026-31458 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: check contexts->nr before accessing contexts_arr[0] Multiple sysfs command paths dereference contexts_arr[0] without first verifying that kdamond->contexts->nr == 1. A user can set nr_contexts to 0 via sysfs while DAMON is running, causing NULL pointer dereferences. In more detail, the issue can be triggered by privileged users like below. First, start DAMON and make contexts directory empty (kdamond->contexts->nr == 0). # damo start # cd /sys/kernel/mm/damon/admin/kdamonds/0 # echo 0 > contexts/nr_contexts Then, each of below commands will cause the NULL pointer dereference. # echo update_schemes_stats > state # echo update_schemes_tried_regions > state # echo update_schemes_tried_bytes > state # echo update_schemes_effective_quotas > state # echo update_tuned_intervals > state Guard all commands (except OFF) at the entry point of damon_sysfs_handle_cmd(). | ||||
| CVE-2026-31459 | 1 Linux | 1 Linux Kernel | 2026-04-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: fix param_ctx leak on damon_sysfs_new_test_ctx() failure Patch series "mm/damon/sysfs: fix memory leak and NULL dereference issues", v4. DAMON_SYSFS can leak memory under allocation failure, and do NULL pointer dereference when a privileged user make wrong sequences of control. Fix those. This patch (of 3): When damon_sysfs_new_test_ctx() fails in damon_sysfs_commit_input(), param_ctx is leaked because the early return skips the cleanup at the out label. Destroy param_ctx before returning. | ||||
| CVE-2026-31463 | 1 Linux | 1 Linux Kernel | 2026-04-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iomap: fix invalid folio access when i_blkbits differs from I/O granularity Commit aa35dd5cbc06 ("iomap: fix invalid folio access after folio_end_read()") partially addressed invalid folio access for folios without an ifs attached, but it did not handle the case where 1 << inode->i_blkbits matches the folio size but is different from the granularity used for the IO, which means IO can be submitted for less than the full folio for the !ifs case. In this case, the condition: if (*bytes_submitted == folio_len) ctx->cur_folio = NULL; in iomap_read_folio_iter() will not invalidate ctx->cur_folio, and iomap_read_end() will still be called on the folio even though the IO helper owns it and will finish the read on it. Fix this by unconditionally invalidating ctx->cur_folio for the !ifs case. | ||||
| CVE-2026-31464 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ibmvfc: Fix OOB access in ibmvfc_discover_targets_done() A malicious or compromised VIO server can return a num_written value in the discover targets MAD response that exceeds max_targets. This value is stored directly in vhost->num_targets without validation, and is then used as the loop bound in ibmvfc_alloc_targets() to index into disc_buf[], which is only allocated for max_targets entries. Indices at or beyond max_targets access kernel memory outside the DMA-coherent allocation. The out-of-bounds data is subsequently embedded in Implicit Logout and PLOGI MADs that are sent back to the VIO server, leaking kernel memory. Fix by clamping num_written to max_targets before storing it. | ||||
| CVE-2026-31466 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix folio isn't locked in softleaf_to_folio() On arm64 server, we found folio that get from migration entry isn't locked in softleaf_to_folio(). This issue triggers when mTHP splitting and zap_nonpresent_ptes() races, and the root cause is lack of memory barrier in softleaf_to_folio(). The race is as follows: CPU0 CPU1 deferred_split_scan() zap_nonpresent_ptes() lock folio split_folio() unmap_folio() change ptes to migration entries __split_folio_to_order() softleaf_to_folio() set flags(including PG_locked) for tail pages folio = pfn_folio(softleaf_to_pfn(entry)) smp_wmb() VM_WARN_ON_ONCE(!folio_test_locked(folio)) prep_compound_page() for tail pages In __split_folio_to_order(), smp_wmb() guarantees page flags of tail pages are visible before the tail page becomes non-compound. smp_wmb() should be paired with smp_rmb() in softleaf_to_folio(), which is missed. As a result, if zap_nonpresent_ptes() accesses migration entry that stores tail pfn, softleaf_to_folio() may see the updated compound_head of tail page before page->flags. This issue will trigger VM_WARN_ON_ONCE() in pfn_swap_entry_folio() because of the race between folio split and zap_nonpresent_ptes() leading to a folio incorrectly undergoing modification without a folio lock being held. This is a BUG_ON() before commit 93976a20345b ("mm: eliminate further swapops predicates"), which in merged in v6.19-rc1. To fix it, add missing smp_rmb() if the softleaf entry is migration entry in softleaf_to_folio() and softleaf_to_page(). [tujinjiang@huawei.com: update function name and comments] | ||||
| CVE-2026-31468 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Fix double free in dma-buf feature The error path through vfio_pci_core_feature_dma_buf() ignores its own advice to only use dma_buf_put() after dma_buf_export(), instead falling through the entire unwind chain. In the unlikely event that we encounter file descriptor exhaustion, this can result in an unbalanced refcount on the vfio device and double free of allocated objects. Avoid this by moving the "put" directly into the error path and return the errno rather than entering the unwind chain. | ||||
| CVE-2026-31471 | 1 Linux | 1 Linux Kernel | 2026-04-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: only publish mode_data after clone setup iptfs_clone_state() stores x->mode_data before allocating the reorder window. If that allocation fails, the code frees the cloned state and returns -ENOMEM, leaving x->mode_data pointing at freed memory. The xfrm clone unwind later runs destroy_state() through x->mode_data, so the failed clone path tears down IPTFS state that clone_state() already freed. Keep the cloned IPTFS state private until all allocations succeed so failed clones leave x->mode_data unset. The destroy path already handles a NULL mode_data pointer. | ||||
| CVE-2026-31473 | 1 Linux | 1 Linux Kernel | 2026-04-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: mc, v4l2: serialize REINIT and REQBUFS with req_queue_mutex MEDIA_REQUEST_IOC_REINIT can run concurrently with VIDIOC_REQBUFS(0) queue teardown paths. This can race request object cleanup against vb2 queue cancellation and lead to use-after-free reports. We already serialize request queueing against STREAMON/OFF with req_queue_mutex. Extend that serialization to REQBUFS, and also take the same mutex in media_request_ioctl_reinit() so REINIT is in the same exclusion domain. This keeps request cleanup and queue cancellation from running in parallel for request-capable devices. | ||||
| CVE-2026-31475 | 1 Linux | 1 Linux Kernel | 2026-04-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: sma1307: fix double free of devm_kzalloc() memory A previous change added NULL checks and cleanup for allocation failures in sma1307_setting_loaded(). However, the cleanup for mode_set entries is wrong. Those entries are allocated with devm_kzalloc(), so they are device-managed resources and must not be freed with kfree(). Manually freeing them in the error path can lead to a double free when devres later releases the same memory. Drop the manual kfree() loop and let devres handle the cleanup. | ||||
| CVE-2026-31477 | 1 Linux | 1 Linux Kernel | 2026-04-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix memory leaks and NULL deref in smb2_lock() smb2_lock() has three error handling issues after list_del() detaches smb_lock from lock_list at no_check_cl: 1) If vfs_lock_file() returns an unexpected error in the non-UNLOCK path, goto out leaks smb_lock and its flock because the out: handler only iterates lock_list and rollback_list, neither of which contains the detached smb_lock. 2) If vfs_lock_file() returns -ENOENT in the UNLOCK path, goto out leaks smb_lock and flock for the same reason. The error code returned to the dispatcher is also stale. 3) In the rollback path, smb_flock_init() can return NULL on allocation failure. The result is dereferenced unconditionally, causing a kernel NULL pointer dereference. Add a NULL check to prevent the crash and clean up the bookkeeping; the VFS lock itself cannot be rolled back without the allocation and will be released at file or connection teardown. Fix cases 1 and 2 by hoisting the locks_free_lock()/kfree() to before the if(!rc) check in the UNLOCK branch so all exit paths share one free site, and by freeing smb_lock and flock before goto out in the non-UNLOCK branch. Propagate the correct error code in both cases. Fix case 3 by wrapping the VFS unlock in an if(rlock) guard and adding a NULL check for locks_free_lock(rlock) in the shared cleanup. Found via call-graph analysis using sqry. | ||||
| CVE-2026-31478 | 1 Linux | 1 Linux Kernel | 2026-04-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: replace hardcoded hdr2_len with offsetof() in smb2_calc_max_out_buf_len() After this commit (e2b76ab8b5c9 "ksmbd: add support for read compound"), response buffer management was changed to use dynamic iov array. In the new design, smb2_calc_max_out_buf_len() expects the second argument (hdr2_len) to be the offset of ->Buffer field in the response structure, not a hardcoded magic number. Fix the remaining call sites to use the correct offsetof() value. | ||||
| CVE-2026-31480 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix potential deadlock in cpu hotplug with osnoise The following sequence may leads deadlock in cpu hotplug: task1 task2 task3 ----- ----- ----- mutex_lock(&interface_lock) [CPU GOING OFFLINE] cpus_write_lock(); osnoise_cpu_die(); kthread_stop(task3); wait_for_completion(); osnoise_sleep(); mutex_lock(&interface_lock); cpus_read_lock(); [DEAD LOCK] Fix by swap the order of cpus_read_lock() and mutex_lock(&interface_lock). | ||||
| CVE-2026-31482 | 1 Linux | 1 Linux Kernel | 2026-04-23 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/entry: Scrub r12 register on kernel entry Before commit f33f2d4c7c80 ("s390/bp: remove TIF_ISOLATE_BP"), all entry handlers loaded r12 with the current task pointer (lg %r12,__LC_CURRENT) for use by the BPENTER/BPEXIT macros. That commit removed TIF_ISOLATE_BP, dropping both the branch prediction macros and the r12 load, but did not add r12 to the register clearing sequence. Add the missing xgr %r12,%r12 to make the register scrub consistent across all entry points. | ||||