Export limit exceeded: 348879 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (348879 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31725 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ecm: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_move() to reparent the net_device between the gadget device tree and /sys/devices/virtual across bind and unbind cycles. During the final unbind, calling device_move(NULL) moves the net_device to the virtual device tree before the gadget device is destroyed. On rebinding, device_move() reparents the device back under the new gadget, ensuring proper sysfs topology and power management ordering. To maintain compatibility with legacy composite drivers (e.g., multi.c), the bound flag is used to indicate whether the network device is shared and pre-registered during the legacy driver's bind phase. | ||||
| CVE-2026-31736 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_ppe: avoid NULL deref when gmac0 is disabled If the gmac0 is disabled, the precheck for a valid ingress device will cause a NULL pointer deref and crash the system. This happens because eth->netdev[0] will be NULL but the code will directly try to access netdev_ops. Instead of just checking for the first net_device, it must be checked if any of the mtk_eth net_devices is matching the netdev_ops of the ingress device. | ||||
| CVE-2026-31735 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommupt: Fix short gather if the unmap goes into a large mapping unmap has the odd behavior that it can unmap more than requested if the ending point lands within the middle of a large or contiguous IOPTE. In this case the gather should flush everything unmapped which can be larger than what was requested to be unmapped. The gather was only flushing the range requested to be unmapped, not extending to the extra range, resulting in a short invalidation if the caller hits this special condition. This was found by the new invalidation/gather test I am adding in preparation for ARMv8. Claude deduced the root cause. As far as I remember nothing relies on unmapping a large entry, so this is likely not a triggerable bug. | ||||
| CVE-2026-31734 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix is_bpf_migration_disabled() false negative on non-PREEMPT_RCU Since commit 8e4f0b1ebcf2 ("bpf: use rcu_read_lock_dont_migrate() for trampoline.c"), the BPF prolog (__bpf_prog_enter) calls migrate_disable() only when CONFIG_PREEMPT_RCU is enabled, via rcu_read_lock_dont_migrate(). Without CONFIG_PREEMPT_RCU, the prolog never touches migration_disabled, so migration_disabled == 1 always means the task is truly migration-disabled regardless of whether it is the current task. The old unconditional p == current check was a false negative in this case, potentially allowing a migration-disabled task to be dispatched to a remote CPU and triggering scx_error in task_can_run_on_remote_rq(). Only apply the p == current disambiguation when CONFIG_PREEMPT_RCU is enabled, where the ambiguity with the BPF prolog still exists. | ||||
| CVE-2026-43266 | 1 Linux | 2 Kernel, Linux Kernel | 2026-05-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: EFI/CPER: don't go past the ARM processor CPER record buffer There's a logic inside GHES/CPER to detect if the section_length is too small, but it doesn't detect if it is too big. Currently, if the firmware receives an ARM processor CPER record stating that a section length is big, kernel will blindly trust section_length, producing a very long dump. For instance, a 67 bytes record with ERR_INFO_NUM set 46198 and section length set to 854918320 would dump a lot of data going a way past the firmware memory-mapped area. Fix it by adding a logic to prevent it to go past the buffer if ERR_INFO_NUM is too big, making it report instead: [Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 [Hardware Error]: event severity: recoverable [Hardware Error]: Error 0, type: recoverable [Hardware Error]: section_type: ARM processor error [Hardware Error]: MIDR: 0xff304b2f8476870a [Hardware Error]: section length: 854918320, CPER size: 67 [Hardware Error]: section length is too big [Hardware Error]: firmware-generated error record is incorrect [Hardware Error]: ERR_INFO_NUM is 46198 [ rjw: Subject and changelog tweaks ] | ||||
| CVE-2026-43270 | 1 Linux | 1 Linux Kernel | 2026-05-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: mtk-mdp: Fix a reference leak bug in mtk_mdp_remove() In mtk_mdp_probe(), vpu_get_plat_device() increases the reference count of the returned platform device. Add platform_device_put() to prevent reference leak. | ||||
| CVE-2026-43273 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ceph: supply snapshot context in ceph_zero_partial_object() The ceph_zero_partial_object function was missing proper snapshot context for its OSD write operations, which could lead to data inconsistencies in snapshots. Reproducer: ../src/vstart.sh --new -x --localhost --bluestore ./bin/ceph auth caps client.fs_a mds 'allow rwps fsname=a' mon 'allow r fsname=a' osd 'allow rw tag cephfs data=a' mount -t ceph fs_a@.a=/ /mnt/mycephfs/ -o conf=./ceph.conf dd if=/dev/urandom of=/mnt/mycephfs/foo bs=64K count=1 mkdir /mnt/mycephfs/.snap/snap1 md5sum /mnt/mycephfs/.snap/snap1/foo fallocate -p -o 0 -l 4096 /mnt/mycephfs/foo echo 3 > /proc/sys/vm/drop/caches md5sum /mnt/mycephfs/.snap/snap1/foo # get different md5sum!! | ||||
| CVE-2026-43282 | 1 Linux | 1 Linux Kernel | 2026-05-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/ionic: Fix potential NULL pointer dereference in ionic_query_port The function ionic_query_port() calls ib_device_get_netdev() without checking the return value which could lead to NULL pointer dereference, Fix it by checking the return value and return -ENODEV if the 'ndev' is NULL. | ||||
| CVE-2026-40561 | 1 Kazuho | 1 Starlet | 2026-05-07 | 5.3 Medium |
| Starlet versions through 0.31 for Perl allows HTTP Request Smuggling via Improper Header Precedence. Starlet incorrectly prioritizes "Content-Length" over "Transfer-Encoding: chunked" when both headers are present in an HTTP request. Per RFC 7230 3.3.3, Transfer-Encoding must take precedence. An attacker could exploit this to smuggle malicious HTTP requests via a front-end reverse proxy. | ||||
| CVE-2026-31733 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix stale direct dispatch state in ddsp_dsq_id @p->scx.ddsp_dsq_id can be left set (non-SCX_DSQ_INVALID) triggering a spurious warning in mark_direct_dispatch() when the next wakeup's ops.select_cpu() calls scx_bpf_dsq_insert(), such as: WARNING: kernel/sched/ext.c:1273 at scx_dsq_insert_commit+0xcd/0x140 The root cause is that ddsp_dsq_id was only cleared in dispatch_enqueue(), which is not reached in all paths that consume or cancel a direct dispatch verdict. Fix it by clearing it at the right places: - direct_dispatch(): cache the direct dispatch state in local variables and clear it before dispatch_enqueue() on the synchronous path. For the deferred path, the direct dispatch state must remain set until process_ddsp_deferred_locals() consumes them. - process_ddsp_deferred_locals(): cache the dispatch state in local variables and clear it before calling dispatch_to_local_dsq(), which may migrate the task to another rq. - do_enqueue_task(): clear the dispatch state on the enqueue path (local/global/bypass fallbacks), where the direct dispatch verdict is ignored. - dequeue_task_scx(): clear the dispatch state after dispatch_dequeue() to handle both the deferred dispatch cancellation and the holding_cpu race, covering all cases where a pending direct dispatch is cancelled. - scx_disable_task(): clear the direct dispatch state when transitioning a task out of the current scheduler. Waking tasks may have had the direct dispatch state set by the outgoing scheduler's ops.select_cpu() and then been queued on a wake_list via ttwu_queue_wakelist(), when SCX_OPS_ALLOW_QUEUED_WAKEUP is set. Such tasks are not on the runqueue and are not iterated by scx_bypass(), so their direct dispatch state won't be cleared. Without this clear, any subsequent SCX scheduler that tries to direct dispatch the task will trigger the WARN_ON_ONCE() in mark_direct_dispatch(). | ||||
| CVE-2026-7875 | 2026-05-07 | 8.8 High | ||
| NanoClaw version 1.2.0 and prior contains a host/container filesystem boundary vulnerability in outbound attachment handling and outbox cleanup that allows a compromised or prompt-injected container to read files outside the intended outbox directory by supplying crafted messages_out.id and content.files values or creating symlinked outbox files. Attackers can exploit this vulnerability to trigger host-side reads of arbitrary files and in some cases achieve recursive deletion of paths outside the intended cleanup target. | ||||
| CVE-2025-31957 | 1 Hcltech | 1 Bigfix Service Management | 2026-05-07 | 2.6 Low |
| HHCL BigFix Service Management (SM) is affected by a Cross‑Site Request Forgery (CSRF) vulnerability. This could lead to unauthorized changes or exposure of sensitive data. | ||||
| CVE-2025-31959 | 1 Hcltech | 1 Bigfix Service Management | 2026-05-07 | 3.5 Low |
| HCL BigFix Service Management (SM) application fails to strip EXIF metadata from uploaded images. This could lead to confidentiality and privacy risks if sensitive location information is unintentionally shared. . | ||||
| CVE-2025-31975 | 1 Hcltech | 1 Bigfix Service Management | 2026-05-07 | 2.6 Low |
| HCL BigFix Service Management (SM) is affected by an Information Disclosure – Server Banner issue was identified. Exposed server banners may reveal software versions and system details, potentially aiding attackers in targeting known vulnerabilities. | ||||
| CVE-2025-31976 | 1 Hcltech | 1 Bigfix Service Management | 2026-05-07 | 4.8 Medium |
| HCL BigFix Service Management (SM) is vulnerable to insufficiently protected credentials for a short duration while communicating with a backend, internal application which could allow an attacker to potentially misuse them, if exfiltrated. . | ||||
| CVE-2026-43259 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: phy: fsl-imx8mq-usb: set platform driver data Add missing platform_set_drvdata() as the data will be used in remove(). | ||||
| CVE-2026-36458 | 1 Liweiyi | 1 Chestnutcms | 2026-05-07 | N/A |
| ChestnutCMS v1.5.10 has a SQL injection vulnerability. The content parameter of the cms_content tag can be manipulated in the admin backend and injected into a SQL query when the template is rendered. | ||||
| CVE-2026-41687 | 1 Ellite | 1 Wallos | 2026-05-07 | 4.3 Medium |
| Wallos is an open-source, self-hostable personal subscription tracker. Prior to version 4.8.1, the SSRF protection in endpoints/subscription/add.php (line 42) and endpoints/payments/add.php (line 40) uses an inline IP validation check (FILTER_FLAG_NO_PRIV_RANGE | FILTER_FLAG_NO_RES_RANGE) that does not block CGNAT addresses (100.64.0.0/10, RFC 6598). The includes/ssrf_helper.php file explicitly defines is_cgnat_ip() to cover this gap (used by notification endpoints), but the logo/icon URL fetching in subscription and payment endpoints performs its own inline validation that misses this range. This allows authenticated users to perform Blind SSRF to internal services in Tailscale, Carrier-Grade NAT, and other environments using 100.64.0.0/10 addresses. This issue has been patched in version 4.8.1. | ||||
| CVE-2026-31726 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: fix NULL pointer dereference during unbind race Commit b81ac4395bbe ("usb: gadget: uvc: allow for application to cleanly shutdown") introduced two stages of synchronization waits totaling 1500ms in uvc_function_unbind() to prevent several types of kernel panics. However, this timing-based approach is insufficient during power management (PM) transitions. When the PM subsystem starts freezing user space processes, the wait_event_interruptible_timeout() is aborted early, which allows the unbind thread to proceed and nullify the gadget pointer (cdev->gadget = NULL): [ 814.123447][ T947] configfs-gadget.g1 gadget.0: uvc: uvc_function_unbind() [ 814.178583][ T3173] PM: suspend entry (deep) [ 814.192487][ T3173] Freezing user space processes [ 814.197668][ T947] configfs-gadget.g1 gadget.0: uvc: uvc_function_unbind no clean disconnect, wait for release When the PM subsystem resumes or aborts the suspend and tasks are restarted, the V4L2 release path is executed and attempts to access the already nullified gadget pointer, triggering a kernel panic: [ 814.292597][ C0] PM: pm_system_irq_wakeup: 479 triggered dhdpcie_host_wake [ 814.386727][ T3173] Restarting tasks ... [ 814.403522][ T4558] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 [ 814.404021][ T4558] pc : usb_gadget_deactivate+0x14/0xf4 [ 814.404031][ T4558] lr : usb_function_deactivate+0x54/0x94 [ 814.404078][ T4558] Call trace: [ 814.404080][ T4558] usb_gadget_deactivate+0x14/0xf4 [ 814.404083][ T4558] usb_function_deactivate+0x54/0x94 [ 814.404087][ T4558] uvc_function_disconnect+0x1c/0x5c [ 814.404092][ T4558] uvc_v4l2_release+0x44/0xac [ 814.404095][ T4558] v4l2_release+0xcc/0x130 Address the race condition and NULL pointer dereference by: 1. State Synchronization (flag + mutex) Introduce a 'func_unbound' flag in struct uvc_device. This allows uvc_function_disconnect() to safely skip accessing the nullified cdev->gadget pointer. As suggested by Alan Stern, this flag is protected by a new mutex (uvc->lock) to ensure proper memory ordering and prevent instruction reordering or speculative loads. This mutex is also used to protect 'func_connected' for consistent state management. 2. Explicit Synchronization (completion) Use a completion to synchronize uvc_function_unbind() with the uvc_vdev_release() callback. This prevents Use-After-Free (UAF) by ensuring struct uvc_device is freed after all video device resources are released. | ||||
| CVE-2025-31978 | 1 Hcltech | 1 Bigfix Service Management | 2026-05-07 | 4.6 Medium |
| HCL BigFix Service Management (SM) does not adequately sanitize or safely render spreadsheet files (CSV, XLS, XLSX) before processing or distributing them. An attacker could populate data fields which, when saved to a CSV file, may attempt information exfiltration or other malicious activity when automatically executed by the spreadsheet software. Note that current versions of Excel warn users of untrusted content. | ||||