Export limit exceeded: 342293 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 342293 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 342293 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (342293 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23464 | 1 Linux | 1 Linux Kernel | 2026-04-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: soc: microchip: mpfs: Fix memory leak in mpfs_sys_controller_probe() In mpfs_sys_controller_probe(), if of_get_mtd_device_by_node() fails, the function returns immediately without freeing the allocated memory for sys_controller, leading to a memory leak. Fix this by jumping to the out_free label to ensure the memory is properly freed. Also, consolidate the error handling for the mbox_request_channel() failure case to use the same label. | ||||
| CVE-2026-23466 | 1 Linux | 1 Linux Kernel | 2026-04-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Open-code GGTT MMIO access protection GGTT MMIO access is currently protected by hotplug (drm_dev_enter), which works correctly when the driver loads successfully and is later unbound or unloaded. However, if driver load fails, this protection is insufficient because drm_dev_unplug() is never called. Additionally, devm release functions cannot guarantee that all BOs with GGTT mappings are destroyed before the GGTT MMIO region is removed, as some BOs may be freed asynchronously by worker threads. To address this, introduce an open-coded flag, protected by the GGTT lock, that guards GGTT MMIO access. The flag is cleared during the dev_fini_ggtt devm release function to ensure MMIO access is disabled once teardown begins. (cherry picked from commit 4f3a998a173b4325c2efd90bdadc6ccd3ad9a431) | ||||
| CVE-2026-23467 | 1 Linux | 1 Linux Kernel | 2026-04-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/dmc: Fix an unlikely NULL pointer deference at probe intel_dmc_update_dc6_allowed_count() oopses when DMC hasn't been initialized, and dmc is thus NULL. That would be the case when the call path is intel_power_domains_init_hw() -> {skl,bxt,icl}_display_core_init() -> gen9_set_dc_state() -> intel_dmc_update_dc6_allowed_count(), as intel_power_domains_init_hw() is called *before* intel_dmc_init(). However, gen9_set_dc_state() calls intel_dmc_update_dc6_allowed_count() conditionally, depending on the current and target DC states. At probe, the target is disabled, but if DC6 is enabled, the function is called, and an oops follows. Apparently it's quite unlikely that DC6 is enabled at probe, as we haven't seen this failure mode before. It is also strange to have DC6 enabled at boot, since that would require the DMC firmware (loaded by BIOS); the BIOS loading the DMC firmware and the driver stopping / reprogramming the firmware is a poorly specified sequence and as such unlikely an intentional BIOS behaviour. It's more likely that BIOS is leaving an unintentionally enabled DC6 HW state behind (without actually loading the required DMC firmware for this). The tracking of the DC6 allowed counter only works if starting / stopping the counter depends on the _SW_ DC6 state vs. the current _HW_ DC6 state (since stopping the counter requires the DC5 counter captured when the counter was started). Thus, using the HW DC6 state is incorrect and it also leads to the above oops. Fix both issues by using the SW DC6 state for the tracking. This is v2 of the fix originally sent by Jani, updated based on the first Link: discussion below. (cherry picked from commit 2344b93af8eb5da5d496b4e0529d35f0f559eaf0) | ||||
| CVE-2026-23468 | 1 Linux | 1 Linux Kernel | 2026-04-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Limit BO list entry count to prevent resource exhaustion Userspace can pass an arbitrary number of BO list entries via the bo_number field. Although the previous multiplication overflow check prevents out-of-bounds allocation, a large number of entries could still cause excessive memory allocation (up to potentially gigabytes) and unnecessarily long list processing times. Introduce a hard limit of 128k entries per BO list, which is more than sufficient for any realistic use case (e.g., a single list containing all buffers in a large scene). This prevents memory exhaustion attacks and ensures predictable performance. Return -EINVAL if the requested entry count exceeds the limit (cherry picked from commit 688b87d39e0aa8135105b40dc167d74b5ada5332) | ||||
| CVE-2026-23469 | 1 Linux | 1 Linux Kernel | 2026-04-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Synchronize interrupts before suspending the GPU The runtime PM suspend callback doesn't know whether the IRQ handler is in progress on a different CPU core and doesn't wait for it to finish. Depending on timing, the IRQ handler could be running while the GPU is suspended, leading to kernel crashes when trying to access GPU registers. See example signature below. In a power off sequence initiated by the runtime PM suspend callback, wait for any IRQ handlers in progress on other CPU cores to finish, by calling synchronize_irq(). At the same time, remove the runtime PM resume/put calls in the threaded IRQ handler. On top of not being the right approach to begin with, and being at the wrong place as they should have wrapped all GPU register accesses, the driver would hit a deadlock between synchronize_irq() being called from a runtime PM suspend callback, holding the device power lock, and the resume callback requiring the same. Example crash signature on a TI AM68 SK platform: [ 337.241218] SError Interrupt on CPU0, code 0x00000000bf000000 -- SError [ 337.241239] CPU: 0 UID: 0 PID: 112 Comm: irq/234-gpu Tainted: G M 6.17.7-B2C-00005-g9c7bbe4ea16c #2 PREEMPT [ 337.241246] Tainted: [M]=MACHINE_CHECK [ 337.241249] Hardware name: Texas Instruments AM68 SK (DT) [ 337.241252] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 337.241256] pc : pvr_riscv_irq_pending+0xc/0x24 [ 337.241277] lr : pvr_device_irq_thread_handler+0x64/0x310 [ 337.241282] sp : ffff800085b0bd30 [ 337.241284] x29: ffff800085b0bd50 x28: ffff0008070d9eab x27: ffff800083a5ce10 [ 337.241291] x26: ffff000806e48f80 x25: ffff0008070d9eac x24: 0000000000000000 [ 337.241296] x23: ffff0008068e9bf0 x22: ffff0008068e9bd0 x21: ffff800085b0bd30 [ 337.241301] x20: ffff0008070d9e00 x19: ffff0008068e9000 x18: 0000000000000001 [ 337.241305] x17: 637365645f656c70 x16: 0000000000000000 x15: ffff000b7df9ff40 [ 337.241310] x14: 0000a585fe3c0d0e x13: 000000999704f060 x12: 000000000002771a [ 337.241314] x11: 00000000000000c0 x10: 0000000000000af0 x9 : ffff800085b0bd00 [ 337.241318] x8 : ffff0008071175d0 x7 : 000000000000b955 x6 : 0000000000000003 [ 337.241323] x5 : 0000000000000000 x4 : 0000000000000002 x3 : 0000000000000000 [ 337.241327] x2 : ffff800080e39d20 x1 : ffff800080e3fc48 x0 : 0000000000000000 [ 337.241333] Kernel panic - not syncing: Asynchronous SError Interrupt [ 337.241337] CPU: 0 UID: 0 PID: 112 Comm: irq/234-gpu Tainted: G M 6.17.7-B2C-00005-g9c7bbe4ea16c #2 PREEMPT [ 337.241342] Tainted: [M]=MACHINE_CHECK [ 337.241343] Hardware name: Texas Instruments AM68 SK (DT) [ 337.241345] Call trace: [ 337.241348] show_stack+0x18/0x24 (C) [ 337.241357] dump_stack_lvl+0x60/0x80 [ 337.241364] dump_stack+0x18/0x24 [ 337.241368] vpanic+0x124/0x2ec [ 337.241373] abort+0x0/0x4 [ 337.241377] add_taint+0x0/0xbc [ 337.241384] arm64_serror_panic+0x70/0x80 [ 337.241389] do_serror+0x3c/0x74 [ 337.241392] el1h_64_error_handler+0x30/0x48 [ 337.241400] el1h_64_error+0x6c/0x70 [ 337.241404] pvr_riscv_irq_pending+0xc/0x24 (P) [ 337.241410] irq_thread_fn+0x2c/0xb0 [ 337.241416] irq_thread+0x170/0x334 [ 337.241421] kthread+0x12c/0x210 [ 337.241428] ret_from_fork+0x10/0x20 [ 337.241434] SMP: stopping secondary CPUs [ 337.241451] Kernel Offset: disabled [ 337.241453] CPU features: 0x040000,02002800,20002001,0400421b [ 337.241456] Memory Limit: none [ 337.457921] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]--- | ||||
| CVE-2026-23470 | 1 Linux | 1 Linux Kernel | 2026-04-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fix deadlock in soft reset sequence The soft reset sequence is currently executed from the threaded IRQ handler, hence it cannot call disable_irq() which internally waits for IRQ handlers, i.e. itself, to complete. Use disable_irq_nosync() during a soft reset instead. | ||||
| CVE-2026-23471 | 1 Linux | 1 Linux Kernel | 2026-04-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm: Fix use-after-free on framebuffers and property blobs when calling drm_dev_unplug When trying to do a rather aggressive test of igt's "xe_module_load --r reload" with a full desktop environment and game running I noticed a few OOPSes when dereferencing freed pointers, related to framebuffers and property blobs after the compositor exits. Solve this by guarding the freeing in drm_file with drm_dev_enter/exit, and immediately put the references from struct drm_file objects during drm_dev_unplug(). Related warnings for framebuffers on the subtest: [ 739.713076] ------------[ cut here ]------------ WARN_ON(!list_empty(&dev->mode_config.fb_list)) [ 739.713079] WARNING: drivers/gpu/drm/drm_mode_config.c:584 at drm_mode_config_cleanup+0x30b/0x320 [drm], CPU#12: xe_module_load/13145 .... [ 739.713328] Call Trace: [ 739.713330] <TASK> [ 739.713335] ? intel_pmdemand_destroy_state+0x11/0x20 [xe] [ 739.713574] ? intel_atomic_global_obj_cleanup+0xe4/0x1a0 [xe] [ 739.713794] intel_display_driver_remove_noirq+0x51/0xb0 [xe] [ 739.714041] xe_display_fini_early+0x33/0x50 [xe] [ 739.714284] devm_action_release+0xf/0x20 [ 739.714294] devres_release_all+0xad/0xf0 [ 739.714301] device_unbind_cleanup+0x12/0xa0 [ 739.714305] device_release_driver_internal+0x1b7/0x210 [ 739.714311] device_driver_detach+0x14/0x20 [ 739.714315] unbind_store+0xa6/0xb0 [ 739.714319] drv_attr_store+0x21/0x30 [ 739.714322] sysfs_kf_write+0x48/0x60 [ 739.714328] kernfs_fop_write_iter+0x16b/0x240 [ 739.714333] vfs_write+0x266/0x520 [ 739.714341] ksys_write+0x72/0xe0 [ 739.714345] __x64_sys_write+0x19/0x20 [ 739.714347] x64_sys_call+0xa15/0xa30 [ 739.714355] do_syscall_64+0xd8/0xab0 [ 739.714361] entry_SYSCALL_64_after_hwframe+0x4b/0x53 and [ 739.714459] ------------[ cut here ]------------ [ 739.714461] xe 0000:67:00.0: [drm] drm_WARN_ON(!list_empty(&fb->filp_head)) [ 739.714464] WARNING: drivers/gpu/drm/drm_framebuffer.c:833 at drm_framebuffer_free+0x6c/0x90 [drm], CPU#12: xe_module_load/13145 [ 739.714715] RIP: 0010:drm_framebuffer_free+0x7a/0x90 [drm] ... [ 739.714869] Call Trace: [ 739.714871] <TASK> [ 739.714876] drm_mode_config_cleanup+0x26a/0x320 [drm] [ 739.714998] ? __drm_printfn_seq_file+0x20/0x20 [drm] [ 739.715115] ? drm_mode_config_cleanup+0x207/0x320 [drm] [ 739.715235] intel_display_driver_remove_noirq+0x51/0xb0 [xe] [ 739.715576] xe_display_fini_early+0x33/0x50 [xe] [ 739.715821] devm_action_release+0xf/0x20 [ 739.715828] devres_release_all+0xad/0xf0 [ 739.715843] device_unbind_cleanup+0x12/0xa0 [ 739.715850] device_release_driver_internal+0x1b7/0x210 [ 739.715856] device_driver_detach+0x14/0x20 [ 739.715860] unbind_store+0xa6/0xb0 [ 739.715865] drv_attr_store+0x21/0x30 [ 739.715868] sysfs_kf_write+0x48/0x60 [ 739.715873] kernfs_fop_write_iter+0x16b/0x240 [ 739.715878] vfs_write+0x266/0x520 [ 739.715886] ksys_write+0x72/0xe0 [ 739.715890] __x64_sys_write+0x19/0x20 [ 739.715893] x64_sys_call+0xa15/0xa30 [ 739.715900] do_syscall_64+0xd8/0xab0 [ 739.715905] entry_SYSCALL_64_after_hwframe+0x4b/0x53 and then finally file close blows up: [ 743.186530] Oops: general protection fault, probably for non-canonical address 0xdead000000000122: 0000 [#1] SMP [ 743.186535] CPU: 3 UID: 1000 PID: 3453 Comm: kwin_wayland Tainted: G W 7.0.0-rc1-valkyria+ #110 PREEMPT_{RT,(lazy)} [ 743.186537] Tainted: [W]=WARN [ 743.186538] Hardware name: Gigabyte Technology Co., Ltd. X299 AORUS Gaming 3/X299 AORUS Gaming 3-CF, BIOS F8n 12/06/2021 [ 743.186539] RIP: 0010:drm_framebuffer_cleanup+0x55/0xc0 [drm] [ 743.186588] Code: d8 72 73 0f b6 42 05 ff c3 39 c3 72 e8 49 8d bd 50 07 00 00 31 f6 e8 3a 80 d3 e1 49 8b 44 24 10 49 8d 7c 24 08 49 8b 54 24 08 <48> 3b 38 0f 85 95 7f 02 00 48 3b 7a 08 0f 85 8b 7f 02 00 48 89 42 [ 743.186589] RSP: 0018:ffffc900085e3cf8 EFLAGS: 00 ---truncated--- | ||||
| CVE-2026-23472 | 1 Linux | 1 Linux Kernel | 2026-04-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: core: fix infinite loop in handle_tx() for PORT_UNKNOWN uart_write_room() and uart_write() behave inconsistently when xmit_buf is NULL (which happens for PORT_UNKNOWN ports that were never properly initialized): - uart_write_room() returns kfifo_avail() which can be > 0 - uart_write() checks xmit_buf and returns 0 if NULL This inconsistency causes an infinite loop in drivers that rely on tty_write_room() to determine if they can write: while (tty_write_room(tty) > 0) { written = tty->ops->write(...); // written is always 0, loop never exits } For example, caif_serial's handle_tx() enters an infinite loop when used with PORT_UNKNOWN serial ports, causing system hangs. Fix by making uart_write_room() also check xmit_buf and return 0 if it's NULL, consistent with uart_write(). Reproducer: https://gist.github.com/mrpre/d9a694cc0e19828ee3bc3b37983fde13 | ||||
| CVE-2026-23473 | 1 Linux | 1 Linux Kernel | 2026-04-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/poll: fix multishot recv missing EOF on wakeup race When a socket send and shutdown() happen back-to-back, both fire wake-ups before the receiver's task_work has a chance to run. The first wake gets poll ownership (poll_refs=1), and the second bumps it to 2. When io_poll_check_events() runs, it calls io_poll_issue() which does a recv that reads the data and returns IOU_RETRY. The loop then drains all accumulated refs (atomic_sub_return(2) -> 0) and exits, even though only the first event was consumed. Since the shutdown is a persistent state change, no further wakeups will happen, and the multishot recv can hang forever. Check specifically for HUP in the poll loop, and ensure that another loop is done to check for status if more than a single poll activation is pending. This ensures we don't lose the shutdown event. | ||||
| CVE-2026-23474 | 1 Linux | 1 Linux Kernel | 2026-04-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: Avoid boot crash in RedBoot partition table parser Given CONFIG_FORTIFY_SOURCE=y and a recent compiler, commit 439a1bcac648 ("fortify: Use __builtin_dynamic_object_size() when available") produces the warning below and an oops. Searching for RedBoot partition table in 50000000.flash at offset 0x7e0000 ------------[ cut here ]------------ WARNING: lib/string_helpers.c:1035 at 0xc029e04c, CPU#0: swapper/0/1 memcmp: detected buffer overflow: 15 byte read of buffer size 14 Modules linked in: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0 #1 NONE As Kees said, "'names' is pointing to the final 'namelen' many bytes of the allocation ... 'namelen' could be basically any length at all. This fortify warning looks legit to me -- this code used to be reading beyond the end of the allocation." Since the size of the dynamic allocation is calculated with strlen() we can use strcmp() instead of memcmp() and remain within bounds. | ||||
| CVE-2026-23475 | 1 Linux | 1 Linux Kernel | 2026-04-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: fix statistics allocation The controller per-cpu statistics is not allocated until after the controller has been registered with driver core, which leaves a window where accessing the sysfs attributes can trigger a NULL-pointer dereference. Fix this by moving the statistics allocation to controller allocation while tying its lifetime to that of the controller (rather than using implicit devres). | ||||
| CVE-2026-31389 | 1 Linux | 1 Linux Kernel | 2026-04-03 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: fix use-after-free on controller registration failure Make sure to deregister from driver core also in the unlikely event that per-cpu statistics allocation fails during controller registration to avoid use-after-free (of driver resources) and unclocked register accesses. | ||||
| CVE-2026-31390 | 1 Linux | 1 Linux Kernel | 2026-04-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix memory leak in xe_vm_madvise_ioctl When check_bo_args_are_sane() validation fails, jump to the new free_vmas cleanup label to properly free the allocated resources. This ensures proper cleanup in this error path. (cherry picked from commit 29bd06faf727a4b76663e4be0f7d770e2d2a7965) | ||||
| CVE-2026-31391 | 1 Linux | 1 Linux Kernel | 2026-04-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-sha204a - Fix OOM ->tfm_count leak If memory allocation fails, decrement ->tfm_count to avoid blocking future reads. | ||||
| CVE-2026-31392 | 1 Linux | 1 Linux Kernel | 2026-04-03 | 5.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix krb5 mount with username option Customer reported that some of their krb5 mounts were failing against a single server as the client was trying to mount the shares with wrong credentials. It turned out the client was reusing SMB session from first mount to try mounting the other shares, even though a different username= option had been specified to the other mounts. By using username mount option along with sec=krb5 to search for principals from keytab is supported by cifs.upcall(8) since cifs-utils-4.8. So fix this by matching username mount option in match_session() even with Kerberos. For example, the second mount below should fail with -ENOKEY as there is no 'foobar' principal in keytab (/etc/krb5.keytab). The client ends up reusing SMB session from first mount to perform the second one, which is wrong. ``` $ ktutil ktutil: add_entry -password -p testuser -k 1 -e aes256-cts Password for testuser@ZELDA.TEST: ktutil: write_kt /etc/krb5.keytab ktutil: quit $ klist -ke Keytab name: FILE:/etc/krb5.keytab KVNO Principal ---- ---------------------------------------------------------------- 1 testuser@ZELDA.TEST (aes256-cts-hmac-sha1-96) $ mount.cifs //w22-root2/scratch /mnt/1 -o sec=krb5,username=testuser $ mount.cifs //w22-root2/scratch /mnt/2 -o sec=krb5,username=foobar $ mount -t cifs | grep -Po 'username=\K\w+' testuser testuser ``` | ||||
| CVE-2026-31393 | 1 Linux | 1 Linux Kernel | 2026-04-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Validate L2CAP_INFO_RSP payload length before access l2cap_information_rsp() checks that cmd_len covers the fixed l2cap_info_rsp header (type + result, 4 bytes) but then reads rsp->data without verifying that the payload is present: - L2CAP_IT_FEAT_MASK calls get_unaligned_le32(rsp->data), which reads 4 bytes past the header (needs cmd_len >= 8). - L2CAP_IT_FIXED_CHAN reads rsp->data[0], 1 byte past the header (needs cmd_len >= 5). A truncated L2CAP_INFO_RSP with result == L2CAP_IR_SUCCESS triggers an out-of-bounds read of adjacent skb data. Guard each data access with the required payload length check. If the payload is too short, skip the read and let the state machine complete with safe defaults (feat_mask and remote_fixed_chan remain zero from kzalloc), so the info timer cleanup and l2cap_conn_start() still run and the connection is not stalled. | ||||
| CVE-2026-31394 | 1 Linux | 1 Linux Kernel | 2026-04-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mac80211: fix crash in ieee80211_chan_bw_change for AP_VLAN stations ieee80211_chan_bw_change() iterates all stations and accesses link->reserved.oper via sta->sdata->link[link_id]. For stations on AP_VLAN interfaces (e.g. 4addr WDS clients), sta->sdata points to the VLAN sdata, whose link never participates in chanctx reservations. This leaves link->reserved.oper zero-initialized with chan == NULL, causing a NULL pointer dereference in __ieee80211_sta_cap_rx_bw() when accessing chandef->chan->band during CSA. Resolve the VLAN sdata to its parent AP sdata using get_bss_sdata() before accessing link data. [also change sta->sdata in ARRAY_SIZE even if it doesn't matter] | ||||
| CVE-2026-31395 | 1 Linux | 1 Linux Kernel | 2026-04-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: fix OOB access in DBG_BUF_PRODUCER async event handler The ASYNC_EVENT_CMPL_EVENT_ID_DBG_BUF_PRODUCER handler in bnxt_async_event_process() uses a firmware-supplied 'type' field directly as an index into bp->bs_trace[] without bounds validation. The 'type' field is a 16-bit value extracted from DMA-mapped completion ring memory that the NIC writes directly to host RAM. A malicious or compromised NIC can supply any value from 0 to 65535, causing an out-of-bounds access into kernel heap memory. The bnxt_bs_trace_check_wrap() call then dereferences bs_trace->magic_byte and writes to bs_trace->last_offset and bs_trace->wrapped, leading to kernel memory corruption or a crash. Fix by adding a bounds check and defining BNXT_TRACE_MAX as DBG_LOG_BUFFER_FLUSH_REQ_TYPE_ERR_QPC_TRACE + 1 to cover all currently defined firmware trace types (0x0 through 0xc). | ||||
| CVE-2026-31396 | 1 Linux | 1 Linux Kernel | 2026-04-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: macb: fix use-after-free access to PTP clock PTP clock is registered on every opening of the interface and destroyed on every closing. However it may be accessed via get_ts_info ethtool call which is possible while the interface is just present in the kernel. BUG: KASAN: use-after-free in ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426 Read of size 4 at addr ffff8880194345cc by task syz.0.6/948 CPU: 1 PID: 948 Comm: syz.0.6 Not tainted 6.1.164+ #109 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8d/0xba lib/dump_stack.c:106 print_address_description mm/kasan/report.c:316 [inline] print_report+0x17f/0x496 mm/kasan/report.c:420 kasan_report+0xd9/0x180 mm/kasan/report.c:524 ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426 gem_get_ts_info+0x138/0x1e0 drivers/net/ethernet/cadence/macb_main.c:3349 macb_get_ts_info+0x68/0xb0 drivers/net/ethernet/cadence/macb_main.c:3371 __ethtool_get_ts_info+0x17c/0x260 net/ethtool/common.c:558 ethtool_get_ts_info net/ethtool/ioctl.c:2367 [inline] __dev_ethtool net/ethtool/ioctl.c:3017 [inline] dev_ethtool+0x2b05/0x6290 net/ethtool/ioctl.c:3095 dev_ioctl+0x637/0x1070 net/core/dev_ioctl.c:510 sock_do_ioctl+0x20d/0x2c0 net/socket.c:1215 sock_ioctl+0x577/0x6d0 net/socket.c:1320 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x18c/0x210 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:46 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 </TASK> Allocated by task 457: kmalloc include/linux/slab.h:563 [inline] kzalloc include/linux/slab.h:699 [inline] ptp_clock_register+0x144/0x10e0 drivers/ptp/ptp_clock.c:235 gem_ptp_init+0x46f/0x930 drivers/net/ethernet/cadence/macb_ptp.c:375 macb_open+0x901/0xd10 drivers/net/ethernet/cadence/macb_main.c:2920 __dev_open+0x2ce/0x500 net/core/dev.c:1501 __dev_change_flags+0x56a/0x740 net/core/dev.c:8651 dev_change_flags+0x92/0x170 net/core/dev.c:8722 do_setlink+0xaf8/0x3a80 net/core/rtnetlink.c:2833 __rtnl_newlink+0xbf4/0x1940 net/core/rtnetlink.c:3608 rtnl_newlink+0x63/0xa0 net/core/rtnetlink.c:3655 rtnetlink_rcv_msg+0x3c6/0xed0 net/core/rtnetlink.c:6150 netlink_rcv_skb+0x15d/0x430 net/netlink/af_netlink.c:2511 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x6d7/0xa30 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x97e/0xeb0 net/netlink/af_netlink.c:1872 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0x14b/0x180 net/socket.c:730 __sys_sendto+0x320/0x3b0 net/socket.c:2152 __do_sys_sendto net/socket.c:2164 [inline] __se_sys_sendto net/socket.c:2160 [inline] __x64_sys_sendto+0xdc/0x1b0 net/socket.c:2160 do_syscall_x64 arch/x86/entry/common.c:46 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Freed by task 938: kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1729 [inline] slab_free_freelist_hook mm/slub.c:1755 [inline] slab_free mm/slub.c:3687 [inline] __kmem_cache_free+0xbc/0x320 mm/slub.c:3700 device_release+0xa0/0x240 drivers/base/core.c:2507 kobject_cleanup lib/kobject.c:681 [inline] kobject_release lib/kobject.c:712 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1cd/0x350 lib/kobject.c:729 put_device+0x1b/0x30 drivers/base/core.c:3805 ptp_clock_unregister+0x171/0x270 drivers/ptp/ptp_clock.c:391 gem_ptp_remove+0x4e/0x1f0 drivers/net/ethernet/cadence/macb_ptp.c:404 macb_close+0x1c8/0x270 drivers/net/ethernet/cadence/macb_main.c:2966 __dev_close_many+0x1b9/0x310 net/core/dev.c:1585 __dev_close net/core/dev.c:1597 [inline] __dev_change_flags+0x2bb/0x740 net/core/dev.c:8649 dev_change_fl ---truncated--- | ||||
| CVE-2026-31397 | 1 Linux | 1 Linux Kernel | 2026-04-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix use of NULL folio in move_pages_huge_pmd() move_pages_huge_pmd() handles UFFDIO_MOVE for both normal THPs and huge zero pages. For the huge zero page path, src_folio is explicitly set to NULL, and is used as a sentinel to skip folio operations like lock and rmap. In the huge zero page branch, src_folio is NULL, so folio_mk_pmd(NULL, pgprot) passes NULL through folio_pfn() and page_to_pfn(). With SPARSEMEM_VMEMMAP this silently produces a bogus PFN, installing a PMD pointing to non-existent physical memory. On other memory models it is a NULL dereference. Use page_folio(src_page) to obtain the valid huge zero folio from the page, which was obtained from pmd_page() and remains valid throughout. After commit d82d09e48219 ("mm/huge_memory: mark PMD mappings of the huge zero folio special"), moved huge zero PMDs must remain special so vm_normal_page_pmd() continues to treat them as special mappings. move_pages_huge_pmd() currently reconstructs the destination PMD in the huge zero page branch, which drops PMD state such as pmd_special() on architectures with CONFIG_ARCH_HAS_PTE_SPECIAL. As a result, vm_normal_page_pmd() can treat the moved huge zero PMD as a normal page and corrupt its refcount. Instead of reconstructing the PMD from the folio, derive the destination entry from src_pmdval after pmdp_huge_clear_flush(), then handle the PMD metadata the same way move_huge_pmd() does for moved entries by marking it soft-dirty and clearing uffd-wp. | ||||