Export limit exceeded: 16335 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16335 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-47601 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 7.5 High |
| GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been discovered in the gst_matroska_demux_parse_blockgroup_or_simpleblock function within matroska-demux.c. This function does not properly check the validity of the GstBuffer *sub pointer before performing dereferences. As a result, null pointer dereferences may occur. This vulnerability is fixed in 1.24.10. | ||||
| CVE-2024-47602 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 7.5 High |
| GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been discovered in the gst_matroska_demux_add_wvpk_header function within matroska-demux.c. This function does not properly check the validity of the stream->codec_priv pointer in the following code. If stream->codec_priv is NULL, the call to GST_READ_UINT16_LE will attempt to dereference a null pointer, leading to a crash of the application. This vulnerability is fixed in 1.24.10. | ||||
| CVE-2024-47615 | 2 Gstreamer, Redhat | 7 Gstreamer, Enterprise Linux, Rhel Aus and 4 more | 2026-03-17 | 9.8 Critical |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-Write has been detected in the function gst_parse_vorbis_setup_packet within vorbis_parse.c. The integer size is read from the input file without proper validation. As a result, size can exceed the fixed size of the pad->vorbis_mode_sizes array (which size is 256). When this happens, the for loop overwrites the entire pad structure with 0s and 1s, affecting adjacent memory as well. This OOB-write can overwrite up to 380 bytes of memory beyond the boundaries of the pad->vorbis_mode_sizes array. This vulnerability is fixed in 1.24.10. | ||||
| CVE-2024-47774 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 9.1 Critical |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been identified in the gst_avi_subtitle_parse_gab2_chunk function within gstavisubtitle.c. The function reads the name_length value directly from the input file without checking it properly. Then, the a condition, does not properly handle cases where name_length is greater than 0xFFFFFFFF - 17, causing an integer overflow. In such scenario, the function attempts to access memory beyond the buffer leading to an OOB-read. This vulnerability is fixed in 1.24.10. | ||||
| CVE-2023-50186 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 8.8 High |
| GStreamer AV1 Video Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of metadata within AV1 encoded video files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-22300. | ||||
| CVE-2024-0444 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 8.8 High |
| GStreamer AV1 Video Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of tile list data within AV1-encoded video files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-22873. | ||||
| CVE-2024-47538 | 2 Gstreamer, Redhat | 7 Gstreamer, Enterprise Linux, Rhel Aus and 4 more | 2026-03-17 | 9.8 Critical |
| GStreamer is a library for constructing graphs of media-handling components. A stack-buffer overflow has been detected in the `vorbis_handle_identification_packet` function within `gstvorbisdec.c`. The position array is a stack-allocated buffer of size 64. If vd->vi.channels exceeds 64, the for loop will write beyond the boundaries of the position array. The value written will always be `GST_AUDIO_CHANNEL_POSITION_NONE`. This vulnerability allows someone to overwrite the EIP address allocated in the stack. Additionally, this bug can overwrite the `GstAudioInfo` info structure. This vulnerability is fixed in 1.24.10. | ||||
| CVE-2024-47603 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 7.5 High |
| GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been discovered in the gst_matroska_demux_update_tracks function within matroska-demux.c. The vulnerability occurs when the gst_caps_is_equal function is called with invalid caps values. If this happen, then in the function gst_buffer_get_size the call to GST_BUFFER_MEM_PTR can return a null pointer. Attempting to dereference the size field of this null pointer results in a null pointer dereference. This vulnerability is fixed in 1.24.10. | ||||
| CVE-2017-5845 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | N/A |
| The gst_avi_demux_parse_ncdt function in gst/avi/gstavidemux.c in gst-plugins-good in GStreamer before 1.10.3 allows remote attackers to cause a denial of service (invalid memory read and crash) via a ncdt sub-tag that "goes behind" the surrounding tag. | ||||
| CVE-2017-5848 | 3 Debian, Gstreamer, Redhat | 9 Debian Linux, Gstreamer, Enterprise Linux and 6 more | 2026-03-17 | 7.5 High |
| The gst_ps_demux_parse_psm function in gst/mpegdemux/gstmpegdemux.c in gst-plugins-bad in GStreamer allows remote attackers to cause a denial of service (invalid memory read and crash) via vectors involving PSM parsing. | ||||
| CVE-2024-47606 | 3 Debian, Gstreamer, Redhat | 8 Debian Linux, Gstreamer, Enterprise Linux and 5 more | 2026-03-17 | 9.8 Critical |
| GStreamer is a library for constructing graphs of media-handling components. An integer underflow has been detected in the function qtdemux_parse_theora_extension within qtdemux.c. The vulnerability occurs due to an underflow of the gint size variable, which causes size to hold a large unintended value when cast to an unsigned integer. This 32-bit negative value is then cast to a 64-bit unsigned integer (0xfffffffffffffffa) in a subsequent call to gst_buffer_new_and_alloc. The function gst_buffer_new_allocate then attempts to allocate memory, eventually calling _sysmem_new_block. The function _sysmem_new_block adds alignment and header size to the (unsigned) size, causing the overflow of the 'slice_size' variable. As a result, only 0x89 bytes are allocated, despite the large input size. When the following memcpy call occurs in gst_buffer_fill, the data from the input file will overwrite the content of the GstMapInfo info structure. Finally, during the call to gst_memory_unmap, the overwritten memory may cause a function pointer hijack, as the mem->allocator->mem_unmap_full function is called with a corrupted pointer. This function pointer overwrite could allow an attacker to alter the execution flow of the program, leading to arbitrary code execution. This vulnerability is fixed in 1.24.10. | ||||
| CVE-2024-47613 | 2 Gstreamer, Redhat | 7 Gstreamer, Enterprise Linux, Rhel Aus and 4 more | 2026-03-17 | 9.8 Critical |
| GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference vulnerability has been identified in `gst_gdk_pixbuf_dec_flush` within `gstgdkpixbufdec.c`. This function invokes `memcpy`, using `out_pix` as the destination address. `out_pix` is expected to point to the frame 0 from the frame structure, which is read from the input file. However, in certain situations, it can points to a NULL frame, causing the subsequent call to `memcpy` to attempt writing to the null address (0x00), leading to a null pointer dereference. This vulnerability can result in a Denial of Service (DoS) by triggering a segmentation fault (SEGV). This vulnerability is fixed in 1.24.10. | ||||
| CVE-2025-3887 | 3 Debian, Gstreamer, Redhat | 7 Debian Linux, Gstreamer, Enterprise Linux and 4 more | 2026-03-17 | 8.8 High |
| GStreamer H265 Codec Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of H265 slice headers. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-26596. | ||||
| CVE-2023-40475 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 8.8 High |
| GStreamer MXF File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of MXF video files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. . Was ZDI-CAN-21661. | ||||
| CVE-2024-47543 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 7.5 High |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been discovered in qtdemux_parse_container function within qtdemux.c. In the parent function qtdemux_parse_node, the value of length is not well checked. So, if length is big enough, it causes the pointer end to point beyond the boundaries of buffer. Subsequently, in the qtdemux_parse_container function, the while loop can trigger an OOB-read, accessing memory beyond the bounds of buf. This vulnerability can result in reading up to 4GB of process memory or potentially causing a segmentation fault (SEGV) when accessing invalid memory. This vulnerability is fixed in 1.24.10. | ||||
| CVE-2023-40476 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-03-17 | 8.8 High |
| GStreamer H265 Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of H265 encoded video files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. . Was ZDI-CAN-21768. | ||||
| CVE-2024-47537 | 2 Gstreamer, Redhat | 7 Gstreamer, Enterprise Linux, Rhel Aus and 4 more | 2026-03-17 | 9.8 Critical |
| GStreamer is a library for constructing graphs of media-handling components. The program attempts to reallocate the memory pointed to by stream->samples to accommodate stream->n_samples + samples_count elements of type QtDemuxSample. The problem is that samples_count is read from the input file. And if this value is big enough, this can lead to an integer overflow during the addition. As a consequence, g_try_renew might allocate memory for a significantly smaller number of elements than intended. Following this, the program iterates through samples_count elements and attempts to write samples_count number of elements, potentially exceeding the actual allocated memory size and causing an OOB-write. This vulnerability is fixed in 1.24.10. | ||||
| CVE-2021-3497 | 3 Debian, Gstreamer, Redhat | 3 Debian Linux, Gstreamer, Enterprise Linux | 2026-03-17 | 7.8 High |
| GStreamer before 1.18.4 might access already-freed memory in error code paths when demuxing certain malformed Matroska files. | ||||
| CVE-2021-3498 | 3 Debian, Gstreamer, Redhat | 3 Debian Linux, Gstreamer, Enterprise Linux | 2026-03-17 | 7.8 High |
| GStreamer before 1.18.4 might cause heap corruption when parsing certain malformed Matroska files. | ||||
| CVE-2015-0797 | 6 Debian, Gstreamer, Linux and 3 more | 16 Debian Linux, Gstreamer, Linux Kernel and 13 more | 2026-03-17 | N/A |
| GStreamer before 1.4.5, as used in Mozilla Firefox before 38.0, Firefox ESR 31.x before 31.7, and Thunderbird before 31.7 on Linux, allows remote attackers to cause a denial of service (buffer over-read and application crash) or possibly execute arbitrary code via crafted H.264 video data in an m4v file. | ||||