Export limit exceeded: 46846 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (46846 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-16243 | 1 Eclipse | 1 Omr | 2026-07-22 | N/A |
| In Eclipse OMR versions up to 0.11, the arraycmp SIMD implementation for Z and P does not check if the number of bytes to compare is zero. | ||||
| CVE-2026-63880 | 1 Linux | 1 Linux Kernel | 2026-07-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix lock leak on ENOMEM in AMDGPU_GEM_OP_GET_MAPPING_INFO The AMDGPU_GEM_OP_GET_MAPPING_INFO branch of amdgpu_gem_op_ioctl() holds three cleanup-tracked resources before calling kvcalloc(): the drm_gem_object reference from drm_gem_object_lookup(), the drm_exec lock on the looked-up GEM via drm_exec_lock_obj(), and the drm_exec lock on the per-process VM root page directory via amdgpu_vm_lock_pd(). All three are released by the out_exec label that every other error path in this function jumps to. The kvcalloc() failure path returns -ENOMEM directly, skipping out_exec and leaking all three. The leaked per-process VM root PD dma_resv lock is the load-bearing leak: any subsequent operation on the same VM (further GEM ops, command-submission, eviction, TTM shrinker callbacks) blocks on the held lock. DRM_IOCTL_AMDGPU_GEM_OP is DRM_AUTH | DRM_RENDER_ALLOW, so this is an unprivileged-local denial of service against the caller's GPU context, reachable by any process with /dev/dri/renderD* access. Route the failure through out_exec so drm_exec_fini() and drm_gem_object_put() run. Reproduced on stock 7.0.0-10, Ryzen 7 5700U / Radeon Vega (Lucienne): the failing ioctl returns -ENOMEM and a second GET_MAPPING_INFO on the same fd then blocks in drm_exec_lock_obj() on the leaked dma_resv. SIGKILL on the caller does not reap the task; the fd-release path during process exit goes through amdgpu_gem_object_close() -> drm_exec_prepare_obj() on the same lock, leaving the task in D state until the box is rebooted. The patched kernel was not rebuilt and re-tested on this hardware; the fix is mechanical. Tested on a single Lucienne / Vega box only. Ziyi Guo posted an independent INT_MAX-bound check for args->num_entries in the same branch [1]; the two patches are complementary and can land in either order. (cherry picked from commit b69d3256d79de15f54c322986ff4da68f1d65b0a) | ||||
| CVE-2026-16473 | 1 Redhat | 1 Enterprise Linux | 2026-07-22 | 4.3 Medium |
| A flaw was found in the sbc library (BlueZ SBC codec). An off-by-one error in the SBC frame decoder allows a crafted audio payload to trigger a one-byte heap out-of-bounds read. This could allow an adjacent attacker streaming Bluetooth audio to read a single byte of adjacent heap memory. | ||||
| CVE-2026-63888 | 1 Linux | 1 Linux Kernel | 2026-07-22 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix CRC overread and double-free in iscsit_handle_text_cmd() Two latent bugs in the Text-phase handler, both present since the original LIO integration in commit e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1"): 1) DataDigest CRC buffer overread (4 bytes past text_in). text_in is kzalloc()'d at ALIGN(payload_length, 4). rx_size is then incremented by ISCSI_CRC_LEN to make room for the received DataDigest in the iovec, but the same (now-bumped) rx_size is passed as the buffer length to iscsit_crc_buf(): if (conn->conn_ops->DataDigest) { ... rx_size += ISCSI_CRC_LEN; } ... if (conn->conn_ops->DataDigest) { data_crc = iscsit_crc_buf(text_in, rx_size, 0, NULL); iscsit_crc_buf() walks rx_size bytes of text_in with crc32c(), so when DataDigest is negotiated it reads 4 bytes past the end of the text_in allocation. KASAN reproduces this directly on the unpatched mainline tree as slab-out-of-bounds in crc32c() called from the Text PDU path. The OOB bytes feed crc32c() and are then compared against the initiator-supplied checksum, so the value does not flow back to the attacker, but the kernel does read past the buffer on every Text PDU with DataDigest=CRC32C. Fix by passing the actual padded payload length (ALIGN(payload_length, 4)) that was used for the kzalloc(). 2) Stale cmd->text_in_ptr re-free (double-free) on ERL>0 bad DataDigest drop. On DataDigest mismatch with ErrorRecoveryLevel > 0 the handler silently drops the PDU and lets the initiator plug the CmdSN gap: kfree(text_in); return 0; cmd->text_in_ptr still points at the freed buffer. The next Text Request on the same ITT re-enters iscsit_setup_text_cmd(), which unconditionally does kfree(cmd->text_in_ptr); cmd->text_in_ptr = NULL; freeing the same pointer a second time. Session teardown via iscsit_release_cmd() has the same shape and hits the same double-free if the connection is dropped before a second Text Request arrives. On an unmodified mainline tree the bug-1 CRC overread fires first on the initial valid Text Request and perturbs the subsequent state, so #4 was isolated by building a kernel with only the bug-1 hunk of this patch applied plus temporary printk() observability around the three relevant kfree() sites. The observability prints are not part of this patch. On that build, a three-PDU Text Request sequence after login produces two back-to-back splats: BUG: KASAN: double-free in iscsit_setup_text_cmd+0x?? BUG: KASAN: double-free in iscsit_release_cmd+0x?? showing the same pointer freed in the ERL>0 drop path and again in iscsit_setup_text_cmd() (next Text Request on the same ITT) and once more in iscsit_release_cmd() (session teardown). On distro kernels with CONFIG_SLAB_FREELIST_HARDENED=y (default) the double-free becomes a remote kernel BUG(); on non-hardened kernels it corrupts the slab freelist. Fix by clearing cmd->text_in_ptr after the kfree() in the ERL>0 drop path. With both hunks applied #4 is directly observable on the stock tree without observability printks; fixing bug-1 alone would mask #4 less, not more, so the hunks are submitted together. Both fixes are one-liners. The Text PDU state machine is unchanged and the wire protocol is unaffected. | ||||
| CVE-2026-63892 | 1 Linux | 1 Linux Kernel | 2026-07-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: property: Reject dir_len < 4 to prevent size_t underflow On the non-root path, __tb_property_parse_dir() takes dir_len from entry->length (u16 widened to size_t). Two distinct OOB conditions follow when entry->length < 4: 1. The non-root path begins with kmemdup(&block[dir_offset], sizeof(*dir->uuid), ...) which always reads 4 dwords from dir_offset. tb_property_entry_valid() only enforces dir_offset + entry->length <= block_len, so a crafted entry with dir_offset close to the end of the property block and entry->length in 0..3 passes that gate but lets the UUID copy run off the block (e.g. dir_offset = 497, dir_len = 3 in a 500-dword block reads block[497..501]). 2. After the kmemdup, content_len = dir_len - 4 underflows size_t to ~SIZE_MAX, nentries becomes SIZE_MAX / 4, and the entry walk runs OOB on each iteration until an entry fails validation or the kernel oopses on an unmapped page. Reject dir_len < 4 on the non-root path *before* the UUID kmemdup, which closes both holes. Also move INIT_LIST_HEAD(&dir->properties) up to immediately after the dir allocation so the new error-return path (and the existing uuid-alloc failure path) calling tb_property_free_dir() sees a walkable list rather than the zero-initialized NULL next/prev that list_for_each_entry_safe() would oops on. | ||||
| CVE-2026-63895 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: copy only received bytes on short ep0 read ffs_ep0_read() allocates its control-OUT data buffer with kmalloc() (not kzalloc) at the Length value from the Setup packet, then copies that full len to userspace regardless of how many bytes were actually received: data = kmalloc(len, GFP_KERNEL); ... ret = __ffs_ep0_queue_wait(ffs, data, len); if ((ret > 0) && (copy_to_user(buf, data, len))) ret = -EFAULT; __ffs_ep0_queue_wait() returns req->actual, which on a short control OUT transfer is strictly less than len. The copy_to_user() call still copies len bytes, so on a short OUT the last (len - ret) bytes of the kmalloc() buffer -- uninitialised slab residue -- are delivered to the FunctionFS daemon. Short ep0 OUT completions are specified USB control-transfer behavior and are produced by in-tree UDCs: * dwc2 continues on req->actual < req->length for ep0 DATA OUT (short-not-ok is the only ep0-OUT stall path). * aspeed_udc ends ep0 OUT on rx_len < ep->ep.maxpacket. * renesas_usbf logs "ep0 short packet" and completes the request. * dwc3 stalls on short IN but not on short OUT. A short ep0 OUT is therefore not evidence of a broken UDC; it is a normal condition f_fs has to cope with. The sibling gadgetfs implementation in drivers/usb/gadget/legacy/inode.c already does this correctly via min(len, dev->req->actual) before copy_to_user(). This patch brings f_fs.c to the same safe pattern rather than trimming at a defensive layer. The bug is reached from the FunctionFS device node, which in real deployments is owned by the privileged gadget daemon (adbd, UMS, composite gadget services, etc.); it is not reachable from unprivileged userspace. Linux host stacks normally reject short-wLength control OUTs before they reach the gadget, so reproducing this required a build that bypasses that host-side check. With the bypass in place, a 1-byte payload on a 64-byte Setup produces 63 bytes of non-canary slab residue in the daemon's read buffer. Fix by copying only ret (actually received) bytes to userspace. | ||||
| CVE-2026-63898 | 1 Linux | 1 Linux Kernel | 2026-07-22 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: mct_u232: fix memory corruption with small endpoint The driver overrides the maximum transfer size for a specific device which only accepts 16 byte packets for its 32 byte bulk-out endpoint. Make sure to never increase the maximum transfer size to prevent slab corruption should a malicious device report a smaller endpoint max packet size than expected. | ||||
| CVE-2026-63900 | 1 Linux | 1 Linux Kernel | 2026-07-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: keyspan: fix missing indat transfer sanity check Add the missing sanity check on the size of usa49wg indat transfers to avoid parsing stale or uninitialised slab data. | ||||
| CVE-2026-63903 | 1 Linux | 1 Linux Kernel | 2026-07-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: belkin_sa: validate interrupt status length The Belkin interrupt callback treats interrupt data as a four-byte status report and reads LSR/MSR fields at offsets 2 and 3. The interrupt-in buffer length is derived from endpoint wMaxPacketSize, and short interrupt transfers may complete successfully with a smaller actual_length. Check the completed interrupt packet length before parsing status fields so short interrupt endpoints and short successful packets are ignored instead of causing out-of-bounds or stale status-byte reads. KASAN report as below: BUG: KASAN: slab-out-of-bounds in belkin_sa_read_int_callback() Read of size 1 Call trace: belkin_sa_read_int_callback() (drivers/usb/serial/belkin_sa.c:202) __usb_hcd_giveback_urb() (drivers/usb/core/hcd.c:1630) dummy_timer() (?:?) | ||||
| CVE-2026-63908 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem When a configuration file provides an object size that is larger than the driver's known mxt_obj_size(object), the driver intends to discard the extra bytes. The loop iterates using for (i = 0; i < size; i++). Inside the loop, the condition to skip processing extra bytes is: if (i > mxt_obj_size(object)) continue; Since i is a 0-based index, the valid indices for the object are 0 through mxt_obj_size(object) - 1. When i == mxt_obj_size(object), the condition evaluates to false, and the code processes the byte instead of discarding it. This causes the code to calculate byte_offset = reg + i - cfg->start_ofs and writes the byte there, overwriting exactly one byte of the adjacent instance or object. Update the boundary check to skip extra bytes correctly by using >=. | ||||
| CVE-2026-63916 | 1 Linux | 1 Linux Kernel | 2026-07-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Fix OOB write in wacom_hid_set_device_mode() wacom_hid_set_device_mode() currently assumes that the HID_DG_INPUTMODE usage is always located in the first field (field[0]) of the feature report. However, a device can specify HID_DG_INPUTMODE in a different field. If HID_DG_INPUTMODE is in a field other than the first one and the first field has a report_count smaller than the usage_index of HID_DG_INPUTMODE, this leads to an out-of-bounds write to r->field[0]->value. Fix this by storing the field index of HID_DG_INPUTMODE in 'struct hid_data' during feature mapping. In wacom_hid_set_device_mode(), use this stored field index to access the correct field and add bounds checks to ensure both the field index and the value index are within valid ranges before writing. | ||||
| CVE-2026-63938 | 1 Linux | 1 Linux Kernel | 2026-07-22 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Check PSC request indices against the actual size of the buffer When processing Page State Change (PSC) requests, validate the PSC buffer against the effective size of the scratch area, which could be less than the maximum size if the guest provided a pointer that isn't exactly at the start of the GHCB shared buffer. | ||||
| CVE-2026-63939 | 1 Linux | 1 Linux Kernel | 2026-07-22 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Compute the correct max length of the in-GHCB scratch area When setting the length of the GHCB scratch area, and the area is in the GHCB shared buffer, set the effective length of the scratch area to the max possible size given the start of the guest-provided pointer, and the end of the shared buffer. The code was "fine" when first introduced, as KVM doesn't consult the length of the buffer when emulating MMIO, because the passed in @len always specifies the *max* size required. But for PSC requests, the incoming @len is just the minimum length (to process the header), and KVM needs to know the full size of the scratch area to avoid buffer overflows (spoiler alert). Opportunistically rename @len => @min_len to better reflect its role. | ||||
| CVE-2026-63943 | 1 Linux | 1 Linux Kernel | 2026-07-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: xpad - fix out-of-bounds access for Share button xpadone_process_packet() receives len directly from urb->actual_length and uses it to index the share-button byte at data[len - 18] or data[len - 26]. Since both len and data[0] are under the device's control, a broken controller can send a GIP_CMD_INPUT packet with actual_length < 18 (e.g. 5 bytes) and reach this code path, causing accesses beyond the actual array. Fix this by calculating the offset and checking bounds against the packet length. | ||||
| CVE-2026-9499 | 1 Qt | 1 Qt | 2026-07-22 | N/A |
| An out-of-bounds read (buffer over-read) vulnerability exists in QTextCodec::codecForName() in Qt. When the function is called with a QByteArray that is not NUL-terminated (for example, one created with QByteArray::fromRawData()), the codec-name matching routine reads past the end of the supplied buffer. In most cases this results in an incorrect text codec being selected; in the worst case, if the over-read reaches unmapped memory, the process crashes (denial of service). The over-read is bounded by the length of the longest codec-name candidate, and the out-of-bounds bytes are only compared internally against Qt's fixed list of codec names, so no data is disclosed to an attacker. Applications that do not pass non-NUL-terminated QByteArrays to QTextCodec::codecForName() are not exposed. The affected code resides in the Qt5Compat module from Qt 6.0.0 onward, and in Qt Core (qtbase) in Qt 4.x and Qt 5.x. | ||||
| CVE-2026-56586 | 2026-07-22 | 3.1 Low | ||
| HCL IEM was affected with X-Content-Type-Options Header Missing. It may enable attackers to perform SSL stripping or man-in-the-middle attacks and intercept sensitive data. | ||||
| CVE-2026-47254 | 2026-07-22 | 6.1 Medium | ||
| libheif is a HEIF and AVIF file format decoder and encoder. Prior to version 1.22.0, `Track::init_sample_timing_table()` in `libheif/sequences/track.cc` stores an out-of-bounds chunk index (`m_chunks.size()`) into `m_presentation_timeline` when the number of chunks defined in the `stco` box is less than the number of samples in `stsz`. A subsequent call to `heif_track_get_next_raw_sequence_sample()` reads `m_chunks[chunk_idx]` with that OOB index, causing a heap-buffer-overflow. Version 1.22.0 fixes the issue. | ||||
| CVE-2026-16118 | 1 Redhat | 1 Enterprise Linux | 2026-07-22 | 7.1 High |
| A flaw was found in xdgmime. A heap-based buffer overflow can be triggered in _xdg_mime_magic_parse_magic_line() in the xdgmimemagic.c file on little-endian systems when an attacker-controlled MIME magic file in a user-writable XDG data location (e.g., in the $XDG_DATA_HOME/mime/magic path) is parsed by an application performing MIME type detection (e.g., via g_content_type_guess()). When performing byte-swap, incorrect pointer arithmetic on the write side causes an out-of-bounds write of 2 bytes, resulting in an application crash or memory corruption. | ||||
| CVE-2026-16517 | 1 Redhat | 3 Enterprise Linux, Hummingbird, Openshift | 2026-07-22 | 2.9 Low |
| A signed integer overflow vulnerability was found in libarchive's ZIP writer. In the archive_write_zip_header function in archive_write_set_format_zip.c, when ZIP encryption is enabled and the entry file size is close to INT64_MAX, the addition of the encryption overhead to the entry size overflows int64_t, resulting in undefined behavior. This could lead to incorrect Zip64 extension decisions or potential memory corruption. | ||||
| CVE-2026-63987 | 1 Linux | 1 Linux Kernel | 2026-07-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES ethnl_update_profile() walks the ETHTOOL_A_PROFILE_IRQ_MODERATION nest list with an index 'i' and writes new_profile[i++] without bounding i. The destination is kmemdup()'d at NET_DIM_PARAMS_NUM_PROFILES entries (5), but the Netlink nest count is entirely user-controlled. Netlink policies do not have support for constraining the number of nested entries (or number of multi-attr entries). | ||||