Export limit exceeded: 376530 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 376530 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 376530 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (376530 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68372 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: core: port: Deattach Type-C connector on component unbind connector_unbind() is the mirror of connector_bind(), but it is missing the symmetric call to typec_deattach() that connector_bind() makes via: if (port_dev->child) typec_attach(port_dev->connector, &port_dev->child->dev); When a Thunderbolt dock is unplugged, two teardown paths race: 1. The component framework calls connector_unbind() first, which sets port_dev->connector = NULL without calling typec_deattach(). This leaves port->usb2_dev/port->usb3_dev in struct typec_port pointing at the USB device that is about to be freed. 2. usb_disconnect() then calls typec_deattach(port_dev->connector, ...), but port_dev->connector is already NULL, so the call is a no-op and port->usb2_dev is never cleared. 3. Concurrently, UCSI detects a PD partner-disconnect event and calls typec_unregister_partner(), which reads port->usb2_dev (now a dangling pointer to freed memory) and passes it to typec_partner_unlink_device() -> sysfs_remove_link() -> dev_name() on the freed device, corrupting the typec/UCSI partner state. This corruption leaves the Thunderbolt tunnel in an inconsistent state on the next dock hot-plug. On affected hardware the dock's I225/igc NIC fails to enumerate: AER fires a slot reset while the igc driver is still initialising ("PCIe link lost"), and the subsequent igc_reset attempt hits igc_rd32 on an already-detached device: igc 0000:2e:00.0 eth0: PCIe link lost, device now detached igc: Failed to read reg 0x0! WARNING: CPU: 9 PID: 129 at drivers/net/ethernet/intel/igc/igc_main.c:7005 igc_rd32+0xa4/0xc0 [igc] Call Trace: igc_disable_pcie_master+0x16/0xa0 [igc] igc_reset_hw_base+0x14/0x170 [igc] igc_reset+0x63/0x110 [igc] igc_io_slot_reset+0x9e/0xd0 [igc] report_slot_reset+0x5d/0xc0 pcie_do_recovery+0x209/0x400 aer_isr_one_error_type+0x235/0x430 aer_isr+0x4e/0x80 irq_thread+0xf4/0x1f0 4. UCSI later handles the PD partner-disconnect and calls typec_unregister_partner(), which still sees the stale port->usb2_dev and tries to remove its sysfs link a second time: kernfs: can not remove 'typec', no directory WARNING: CPU: 6 PID: 55 at fs/kernfs/dir.c:1706 kernfs_remove_by_name_ns+0xe9/0xf0 Workqueue: events ucsi_handle_connector_change [typec_ucsi] Call Trace: sysfs_remove_link+0x19/0x50 typec_unregister_partner+0x6e/0x120 [typec] ucsi_unregister_partner+0x107/0x150 [typec_ucsi] ucsi_handle_connector_change+0x3ec/0x490 [typec_ucsi] process_one_work+0x18e/0x3e0 worker_thread+0x2e3/0x420 kthread+0x10a/0x230 ret_from_fork+0x121/0x140 ret_from_fork_asm+0x1a/0x30 With worse timing the same stale pointer is dereferenced after the backing memory is freed, turning the warning into a use-after-free. Fix the asymmetry: call typec_deattach() before clearing port_dev->connector, matching what connector_bind() does on the bind side. typec_partner_deattach() is already protected by port->partner_link_lock, so it serialises safely with the concurrent typec_unregister_partner() path. | ||||
| CVE-2026-68395 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ata: sata_dwc_460ex: enable SATA interrupts only after IRQ handler is registered sata_dwc_enable_interrupts() is called before platform_get_irq() and ata_host_activate(), leaving the SATA controller's interrupt mask enabled without a registered handler. If a later step fails (irq request, phy init, etc.) or if the controller asserts an interrupt during probe, the irq line may fire with no handler, causing a spurious interrupt storm. Move sata_dwc_enable_interrupts() after ata_host_activate() so that interrupts are only unmasked once the handler is registered and the core is fully initialized. | ||||
| CVE-2026-68397 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/iucv: take a reference on the socket found in afiucv_hs_rcv() afiucv_hs_rcv() looks up the destination socket under iucv_sk_list.lock, drops the lock, and then passes the socket to the afiucv_hs_callback_*() handlers without holding a reference. AF_IUCV sockets are not RCU-protected and are freed synchronously by iucv_sock_kill() -> sock_put(), so a concurrent close can free the socket in the window between read_unlock() and the handler, which then dereferences freed memory (for example sk->sk_data_ready() in afiucv_hs_callback_syn()). Take a reference with sock_hold() while the socket is still on the list and release it with sock_put() once the handler has run. | ||||
| CVE-2026-68402 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: bound element ID read when checking non-inheritance cfg80211_is_element_inherited() reads the first data octet of the candidate element (id = elem->data[0]) to look it up in an extension non-inheritance list. It does so after testing elem->id, but without verifying that the element actually has a data octet. A zero-length extension element (WLAN_EID_EXTENSION with length 0) therefore makes it read one octet past the end of the element. _ieee802_11_parse_elems_full() runs this check for every element of a frame once a non-inheritance context exists -- e.g. while parsing a per-STA profile of a Multi-Link element in a (re)association response, or a non-transmitted BSS profile -- so a crafted frame from an AP can trigger a one-octet slab-out-of-bounds read during element parsing: BUG: KASAN: slab-out-of-bounds in cfg80211_is_element_inherited Read of size 1 ... in net/wireless/scan.c Return early (treat the element as inherited) when an extension element carries no data, mirroring the existing handling of empty ID lists. The bug was found by fuzzing ieee802_11_parse_elems_full() under KASAN. | ||||
| CVE-2026-68420 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: reject optional IPTFS templates in outbound policies syzbot reported a stack-out-of-bounds read in xfrm_state_find() which flows from xfrm_tmpl_resolve_one(). Commit 3d776e31c841 ("xfrm: Reject optional tunnel/BEET mode templates in outbound policies") disallowed optional tunnel and BEET in outbound policies to prevent this. Later when IPTFS added, it was not covered by that fix and can still trigger the out-of-bounds read; Extend the check to disallow optional IPTFS in outbound policies as well. IPTFS should be identical to tunnel mode. IN and FWD policies are not affected: xfrm_tmpl_resolve_one() is only reachable via the outbound path. Reproducer, before: ip link add dummy0 type dummy ip link set dummy0 up ip addr add 10.1.1.1/24 dev dummy0 ip xfrm policy add src 10.1.1.1/32 dst 10.1.1.2/32 dir out tmpl src fc00::dead:1 dst fc00::dead:2 proto esp reqid 1 mode iptfs level use tmpl src fc00::dead:1 dst fc00::dead:2 proto esp reqid 2 mode transport ping -W 1 -c 1 10.1.1.2 PING 10.1.1.2 (10.1.1.2) 56(84) bytes of data. [ 64.168420] ================================================================== [ 64.169977] BUG: KASAN: stack-out-of-bounds in __xfrm6_addr_hash+0x11e/0x170 [ 64.169977] Read of size 4 at addr ffff88800e1ffd20 by task ping/2844 [ 64.169977] CPU: 2 UID: 0 PID: 2844 Comm: ping Not tainted 7.1.0-rc7-00180-geb23b588430a #98 PREEMPT(full) [ 64.169977] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 64.169977] Call Trace: [ 64.169977] <TASK> [ 64.169977] dump_stack_lvl+0x47/0x70 [ 64.169977] ? __xfrm6_addr_hash+0x11e/0x170 [ 64.169977] print_report+0x152/0x4b0 [ 64.169977] ? ksys_mmap_pgoff+0x6d/0xa0 [ 64.169977] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 64.169977] ? rcu_read_unlock_sched+0xa/0x20 [ 64.169977] ? __virt_addr_valid+0x21b/0x230 [ 64.169977] ? __xfrm6_addr_hash+0x11e/0x170 [ 64.169977] kasan_report+0xa8/0xd0 [ 64.169977] ? __xfrm6_addr_hash+0x11e/0x170 [ 64.169977] __xfrm6_addr_hash+0x11e/0x170 [ 64.169977] __xfrm_dst_hash+0x24/0xc0 [ 64.169977] xfrm_state_find+0xa2d/0x2f90 [ 64.169977] ? __pfx_xfrm_state_find+0x10/0x10 [ 64.169977] ? __pfx_ftrace_graph_ret_addr+0x10/0x10 [ 64.169977] ? __pfx_ftrace_graph_ret_addr+0x10/0x10 [ 64.169977] xfrm_tmpl_resolve_one+0x210/0x570 [ 64.169977] ? __pfx_xfrm_tmpl_resolve_one+0x10/0x10 [ 64.169977] ? __pfx_stack_trace_consume_entry+0x10/0x10 [ 64.169977] ? kernel_text_address+0x5b/0x80 [ 64.169977] ? __kernel_text_address+0xe/0x30 [ 64.169977] ? unwind_get_return_address+0x5e/0x90 [ 64.169977] ? arch_stack_walk+0x8c/0xe0 [ 64.169977] xfrm_tmpl_resolve+0x130/0x200 [ 64.169977] ? __pfx_xfrm_tmpl_resolve+0x10/0x10 [ 64.169977] ? __pfx_xfrm_policy_inexact_lookup_rcu+0x10/0x10 [ 64.169977] ? __refcount_add_not_zero.constprop.0+0xb2/0x110 [ 64.169977] ? __pfx___refcount_add_not_zero.constprop.0+0x10/0x10 [ 64.169977] xfrm_resolve_and_create_bundle+0xd5/0x310 [ 64.169977] ? __pfx_xfrm_resolve_and_create_bundle+0x10/0x10 [ 64.169977] ? __pfx_xfrm_policy_lookup_bytype+0x10/0x10 [ 64.169977] ? __pfx_xfrm_policy_lookup_bytype+0x10/0x10 [ 64.169977] xfrm_lookup_with_ifid+0x3d8/0xb80 [ 64.169977] ? __pfx_xfrm_lookup_with_ifid+0x10/0x10 [ 64.169977] ? ip_route_output_key_hash+0xc6/0x110 [ 64.169977] ? kasan_save_track+0x10/0x30 [ 64.169977] xfrm_lookup_route+0x18/0xe0 [ 64.169977] ip4_datagram_release_cb+0x4c9/0x530 [ 64.169977] ? __pfx_ip4_datagram_release_cb+0x10/0x10 [ 64.169977] ? do_raw_spin_lock+0x71/0xc0 [ 64.169977] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 64.169977] release_sock+0xb0/0x170 [ 64.169977] udp_connect+0x43/0x50 [ 64.169977] __sys_connect+0xa6/0x100 [ 64.169977] ? alloc_fd+0x2e9/0x300 [ 64.169977] ? __pfx___sys_connect+0x10/0x10 [ 64.169977] ? preempt_latency ---truncated--- | ||||
| CVE-2026-68421 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 0.0 Low |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't warn on core-sched forced idle in put_prev_task_scx() put_prev_task_scx() warns when a runnable task drops to a lower sched_class without SCX_OPS_ENQ_LAST, on the assumption that balance_one() would have kept it running. Core scheduling breaks that: a forced-idle SMT sibling reschedules through the core_pick fast path in pick_next_task(), which skips pick_task_scx() and thus balance_one(), so a runnable task can drop to idle with ENQ_LAST unset. Gate the warning on sched_cpu_cookie_match(): a cookie mismatch means core scheduling forced the idle, while a match (or core scheduling off) still catches a genuine missing-ENQ_LAST drop. | ||||
| CVE-2026-68425 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: IB/mad: Drop unmatched RMPP responses before reassembly Kernel-handled RMPP receive processing starts reassembly for active DATA responses before the response is matched to an outstanding send. The normal match happens later, after ib_process_rmpp_recv_wc() has either assembled a complete message or consumed the segment. That ordering lets an unsolicited response that routes to a kernel RMPP agent by the high TID bits allocate or extend RMPP receive state before the full TID and source address are checked against a real request. A reordered burst can therefore reach the receive-side insertion path even though the response would not match any send. For kernel-handled RMPP DATA responses, require the existing ib_find_send_mad() match before entering RMPP reassembly. The matcher already checks the full TID, management class and source address/GID against the agent wait, backlog and in-flight send lists. If there is no match, drop the response without creating RMPP state. This leaves the RMPP window behavior unchanged and only rejects responses that have no corresponding request. | ||||
| CVE-2026-68383 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Keep scheduler timeline name alive The scheduler keeps a pointer to the timeline name, but q->name is freed with the exec queue while scheduler fences can still reference it. Store the name in struct xe_guc_exec_queue so it shares the scheduler's RCU-deferred lifetime. (cherry picked from commit 41075f0eb5dcbd3b065d15f15ef7bbe9315188e8) | ||||
| CVE-2026-68409 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: defer link RX stats percpu free to RCU sta_remove_link() frees a removed MLO link's RX stats percpu buffer right away, but defers only the link container to RCU: sta_info_free_link(&alloc->info); kfree_rcu(alloc, rcu_head); The RX fast path reads link_sta under rcu_read_lock and writes the percpu stats. A reader that resolved link_sta before the removal keeps the pointer. The container stays alive from the kfree_rcu, so the read still works. But the percpu block it points to is already freed. This needs uses_rss. That is when pcpu_rx_stats exists. The full STA teardown frees the deflink stats only after synchronize_net(). The link removal path had no such barrier. The race is hard to win in practice, but the free should still wait for RCU. Free the link together with its data from a single RCU callback, so the percpu block is reclaimed only after readers drain. | ||||
| CVE-2026-68412 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Fix an error handling path in cfg80211_wext_siwscan() If the test against IEEE80211_MAX_SSID_LEN fails, then 'creq' leaks. Use the existing error handling path to fix it. | ||||
| CVE-2026-68414 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: cancel sched scan results work on unregister cfg80211_sched_scan_results() can queue rdev->sched_scan_res_wk from a driver result notification while a scheduled scan request is present. The work callback recovers the containing cfg80211_registered_device and then locks the wiphy and walks the scheduled-scan request list. wiphy_unregister() already makes the wiphy unreachable and drains rdev work items before cfg80211_dev_free() can release the object, but it does not drain sched_scan_res_wk. A queued or running result work item can therefore cross the unregister/free boundary and access freed rdev state. The buggy scenario involves two paths, with each column showing the order within that path: scheduled-scan result path: unregister/free path: 1. cfg80211_sched_scan_results() 1. interface teardown stops and queues rdev->sched_scan_res_wk. removes the scheduled scan request. 2. cfg80211_wq starts the work 2. wiphy_unregister() drains other item and recovers rdev. rdev work items. 3. The worker locks rdev->wiphy 3. cfg80211_dev_free() destroys and and walks rdev state. frees rdev. Cancel sched_scan_res_wk in wiphy_unregister() alongside the other rdev work items. cancel_work_sync() removes a pending result notification and waits for an already running callback, so cfg80211_dev_free() cannot free rdev while this work item is still active. Validation reproduced this kernel report: BUG: KASAN: use-after-free in cfg80211_sched_scan_results_wk+0x4a6/0x530 Workqueue: cfg80211 cfg80211_sched_scan_results_wk [cfg80211] Read of size 8 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 cfg80211_sched_scan_results_wk+0x4a6/0x530 srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x224/0x430 kasan_report+0xac/0xe0 lockdep_hardirqs_on_prepare+0xea/0x1a0 process_one_work+0x8d0/0x18f0 (kernel/workqueue.c:3212) lock_is_held_type+0x8f/0x100 worker_thread+0x5ad/0xfd0 __kthread_parkme+0xc6/0x200 kthread+0x31e/0x410 trace_hardirqs_on+0x1a/0x170 ret_from_fork+0x576/0x810 __switch_to+0x57e/0xe20 __switch_to_asm+0x33/0x70 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-68415 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: clear mode callbacks after failed mode setup xfrm_state_gc_task can run long after a failed IPTFS state setup. In the reproduced case, __xfrm_init_state() cached x->mode_cbs, IPTFS setup returned -ENOMEM before publishing mode_data, and the temporary module reference from xfrm_get_mode_cbs() was dropped immediately. The dead state then kept x->mode_cbs until deferred GC ran after xfrm_iptfs had been unloaded. Clear x->mode_cbs when mode init or clone fails before publishing mode_data. Those states never installed mode-specific state or the long-term IPTFS module pin, so deferred GC has nothing mode-specific to destroy and must not retain a callback table pointer past the temporary lookup reference. The buggy scenario involves two paths, with each column showing the order within that path: failed setup path: 1. cache x->mode_cbs 2. mode setup fails before mode_data 3. drop the temporary module ref 4. dead state keeps x->mode_cbs cached GC/unload path: 1. xfrm_state_put() queues GC work 2. xfrm_iptfs unloads later 3. xfrm_state_gc_task runs 4. GC dereferences stale x->mode_cbs This also covers the failed clone path where clone_state() returns before publishing mode_data. Validation reproduced this kernel report: Kernel panic - not syncing: Fatal exception CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y failslab_stacktrace_filter matched xfrm_iptfs frames ack_error=-12 FAULT_INJECTION: forcing a failure BUG: unable to handle page fault Workqueue: events xfrm_state_gc_task RIP: xfrm_state_gc_task+0x142/0x650 Modules linked in: esp4_offload xfrm_user [last unloaded: xfrm_iptfs] Kernel panic - not syncing: Fatal exception | ||||
| CVE-2026-68417 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: publish QP after initialization siw_create_qp() currently calls siw_qp_add() before the queues, CQ pointers, state, completion, and device list entry are ready. A QPN lookup can therefore reach a QP that is still being constructed. Move siw_qp_add() to the end of siw_create_qp(), after QP initialization and before adding the QP to the siw device list. | ||||
| CVE-2026-68418 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Prevent user-triggered null deref on QP create Previously, the user QP creation path would only attempt to populate iwqp->iwpbl if the user-provided req.user_wqe_bufs field was non-zero. The problem is that iwqp->iwpbl is unconditionally dereferenced later on in irdma_setup_virt_qp. While there was a check for iwqp->iwpbl != NULL, this check would only occur if req.user_wqe_bufs was non-zero. The end result is that a user could send a zero user_wqe_bufs value and trigger a null ptr deref. Fix this by unconditionally calling irdma_get_pbl and bailing if it fails, similar to the CQ and SRQ paths. | ||||
| CVE-2026-15416 | 1 Redhat | 2 Openshift Data Foundation, Openshift Gitops | 2026-08-11 | 8.9 High |
| A flaw was identified in Argo CD, the GitOps engine used by Red Hat OpenShift GitOps, that could allow an unauthenticated attacker with network access to the Argo CD repo-server to achieve remote code execution. Under certain conditions, the attacker may then manipulate cached data to deploy malicious Kubernetes resources to managed clusters, potentially resulting in complete cluster compromise. | ||||
| CVE-2026-68360 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Stop device IO before calling hid_hw_stop Calling hid_hw_stop() does not stop the device IO. This results in a race condition between hid_input_report() and the point immediately following the execution of hid_device_io_start() within the driver probe function. If the probe operation fails after "io start" has been initiated, this race condition will result in a UAF vulnerability. Fix the problem by calling hid_device_io_stop() before calling hid_hw_stop(). | ||||
| CVE-2026-68369 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: printer: fix infinite loop in printer_read() printer_read() uses the same variable for the requested copy size and the number of bytes actually copied to user space. copy_to_user() returns the number of bytes not copied, so when it fails to copy anything, the computed copied length becomes zero. In that case len, buf, current_rx_bytes and current_rx_buf are left unchanged. If RX data is available and the user buffer remains unwritable, the read loop can repeat indefinitely. Track the copied length separately and return -EFAULT, or the number of bytes already copied, if an iteration makes no progress. | ||||
| CVE-2026-68371 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: musb: omap2430: Do not put borrowed of_node in probe omap2430_probe() stores pdev->dev.of_node in a local np variable. This is a borrowed pointer and the probe function does not take a reference to it. The success and error paths nevertheless call of_node_put(np). This drops a reference that is owned by the platform device, and can leave pdev->dev.of_node with an unbalanced reference count. Do not put the borrowed platform device node from omap2430_probe(). References taken for the child MUSB device are handled by the device core, and the ctrl-module phandle reference is still released separately. | ||||
| CVE-2026-68399 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF in sock clone early bailouts Similar to recent commit 9b51a6155d14 ("bpf,fork: wipe ->bpf_storage before bailouts that access it"), sk_clone() performs an initial shallow copy of the socket field ->sk_bpf_storage via sock_copy() for the cloned socket newsk. If sk_clone() bails out early (e.g. if sk_filter_charge() fails) prior to calling bpf_sk_storage_clone(), newsk->sk_bpf_storage still points to the parent socket's BPF local storage. When newsk is subsequently freed via sk_free(), the deallocation path (__sk_destruct() -> bpf_sk_storage_free()) destroys the parent socket's BPF local storage, leading to a use-after-free (UAF) on the parent socket. Fix this by resetting newsk->sk_bpf_storage to NULL immediately after sock_copy() in sk_clone(), and remove the now redundant initialization from bpf_sk_storage_clone(). | ||||
| CVE-2026-68406 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: validate PMSR FTM preamble range PMSR FTM request parsing accepts preamble values outside the enumerated nl80211 preamble range. Reject out-of-range values before using them in the parser capability bit test using the policy. [drop unnecessary check] | ||||