Export limit exceeded: 382461 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (382461 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74707 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xsk: validate metadata when processing requests The zero-copy path validates TX metadata while obtaining the descriptor context, then reads it again later when preparing the hardware request. User space can change the metadata between those operations and bypass the original validation. Validate the metadata in xsk_tx_metadata_request() and use the resulting flags snapshot for every feature check. Read request fields once so all zero-copy drivers process only values observed after successful validation. | ||||
| CVE-2026-74708 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xsk: validate launch-time metadata size Launch-time metadata extends beyond the first 16 bytes of struct xsk_tx_metadata. Reject the request when the registered metadata area does not contain the complete field. Snapshot the validated flags for the generic transmit path and use that snapshot for request and completion processing, avoiding inconsistent decisions if user space changes the flags concurrently. Note that only xsk_skb_metadata is properly using the flags, __xsk_buff_get_metadata ignores them. Next commits address that. | ||||
| CVE-2026-74710 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xsk: require at least 16 bytes of TX metadata AF_XDP accepts a TX metadata length as small as eight bytes, but every supported request needs the flags plus at least one eight-byte request field. Such short metadata also lets the kernel read beyond the registered area. Require 16 bytes rather than sizeof(struct xsk_tx_metadata) to preserve compatibility with applications that do not use launch-time metadata. | ||||
| CVE-2026-65633 | 1 Team-alembic | 1 Ash Authentication | 2026-08-25 | N/A |
| Improper Authentication vulnerability in team-alembic AshAuthentication allows purpose-limited JWTs to be replayed as full bearer API credentials when a resource uses stateless bearer-token verification. The bearer-token authentication helper AshAuthentication.Plug.Helpers.retrieve_from_bearer/3 verifies an Authorization: Bearer JWT's signature and rejects tokens containing an act claim, but performs no check that the token's purpose claim equals user at the bearer boundary. When the resource is configured with require_token_presence_for_authentication?: false (the DSL default), the follow-on validate_token/3 helper returns {:ok, nil} without consulting the token resource, so no downstream check on purpose takes place either. As a result, any valid, non-expired JWT the library itself issued for a narrow, single-purpose flow (most notably the purpose: sign_in token that WebAuthn always emits during sign-in, and that the Password strategy emits when sign-in tokens are enabled) is accepted directly as a general-purpose bearer credential and resolves to a full current_user assignment. This bypasses the library's intended token-exchange contract, in which the sign_in token is meant to be presented exactly once to a preparation that validates the purpose claim and immediately revokes the token. The first use of a still-valid sign-in token presented directly in the Authorization header succeeds because the stateless bearer path never scopes it to purpose == "user". An attacker who obtains a not-yet-exchanged sign-in token for a target subject (for example via log or referrer leakage, an intercepted magic-link delivery channel, or a partially compromised intermediary) can present it as a bearer token and be authenticated as that subject, fully bypassing the intended one-time-use and revocation semantics. Exploitation additionally requires that the host application wire up retrieve_from_bearer/3 on a reachable route and uses either WebAuthn (sign-in tokens are always issued) or the Password strategy with sign_in_tokens_enabled?: true. Resources configured with require_token_presence_for_authentication?: true (including applications scaffolded by the Igniter installer since v4.5.0) and the session-based path (authenticate_resource_from_session/4) enforce purpose == "user" against the stored token record and are not affected. This issue affects ash_authentication: from 3.10.5 before 4.14.2 and from 5.0.0-rc.0 before 5.0.0-rc.13. | ||||
| CVE-2026-66882 | 1 Team-alembic | 1 Ash Authentication | 2026-08-25 | N/A |
| Improper Neutralization of Input During Web Page Generation (XSS) vulnerability in team-alembic AshAuthentication allows reflected cross-site scripting via the confirmation and magic link interaction forms. When a strategy is configured with require_interaction? set to true, AshAuthentication serves an intermediate HTML page asking the user to confirm the action by submitting a form. Both such pages embed a request parameter directly into a hidden input's value attribute without HTML escaping: lib/ash_authentication/add_ons/confirmation/confirmation_form.html.eex interpolates the confirm parameter, and lib/ash_authentication/strategies/magic_link/sign_in_form.html.eex interpolates the magic link token parameter. These templates are compiled with EEx.function_from_file/3 using plain <%= %> expressions, which perform no escaping, so the parameter is reflected verbatim. Neither accept handler validates the value before rendering it. AshAuthentication.AddOn.Confirmation.Plug.accept/2 only checks that a confirm key is present, and AshAuthentication.Strategy.MagicLink.Plug.accept/2 reads the parameter directly, so no token signature is verified at this stage and arbitrary attacker-supplied text reaches the template. An unauthenticated attacker can therefore craft a URL whose parameter terminates the attribute and injects markup, for example a quote followed by a <script> element. Because the accept phase is served over GET, loading the crafted link is sufficient; no form submission or prior authentication is required. The injected script executes in the origin of the application embedding AshAuthentication, giving it access to that origin's cookies, session, and same-origin responses. Since these pages are part of the authentication flow, a victim following what appears to be a legitimate confirmation or sign-in link is a plausible target. This issue affects ash_authentication: from 4.8.0 before 4.14.2 and from 5.0.0-rc.0 before 5.0.0-rc.13. | ||||
| CVE-2026-74587 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix use-after-free of cached ASCONF chunk addip_last_asconf caches the outstanding outbound ASCONF chunk. The normal ASCONF-ACK completion path releases the chunk and clears the pointer. However, sctp_asconf_queue_teardown() releases the cached chunk without clearing addip_last_asconf. During peer restart handling, sctp_sf_do_dupcook_a() queues SCTP_CMD_PURGE_ASCONF_QUEUE, which invokes sctp_asconf_queue_teardown() while the association remains alive and leaves the pointer dangling. A delayed authenticated ASCONF-ACK can then reach sctp_sf_do_asconf_ack(), which accesses the stale chunk and passes it to sctp_process_asconf_ack(), causing a use-after-free and a second release. Clearing the pointer exposes a race with T4 expiry. Peer restart handling queues the timer stop before the purge, but SCTP_CMD_TIMER_STOP uses timer_delete(), which does not wait for a callback already running on another CPU. Such a callback can reach sctp_sf_t4_timer_expire() after the purge and dereference NULL. Clear addip_last_asconf after releasing the cached chunk, and make sctp_sf_t4_timer_expire() consume a stale T4 expiry if no outstanding ASCONF remains. | ||||
| CVE-2026-74608 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: Fix use-after-free in cifs_try_adding_channels() cifs_try_adding_channels() takes a temporary reference to an interface before dropping iface_lock. If cifs_ses_add_channel() fails, it drops that reference and then increments iface->weight_fulfilled. A concurrent interface list refresh can remove the list reference while channel creation is in progress. In that case, the failure-path kref_put() releases the last reference and frees iface. Updating weight_fulfilled afterward then accesses freed memory. Increment weight_fulfilled before dropping the temporary reference, keeping iface alive for the final access. | ||||
| CVE-2026-74662 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: inet: frags: publish queues before arming timer inet_frag_create() arms the fragment queue timer before inserting the queue into the fqdir rhashtable. If the namespace fragment timeout is zero or negative, the timer can run before the queue is published. The timer callback then marks the queue complete, tries to remove a node that is not in the hash table yet, and drops the anticipated hash reference. Creation can subsequently publish the completed queue without restoring that reference, leaving a stale hash node after the caller drops the remaining reference. Publish the queue first and arm the timer while holding the queue lock. This makes timer expiry wait until the queue is visible in the hash table, so inet_frag_kill() can remove the node and balance the hash reference. | ||||
| CVE-2026-74688 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: clear control chunk transport if it is being removed sctp_make_heartbeat_ack() caches the destination transport in chunk->transport without taking a reference. When src_out_of_asoc_ok is enabled, the HEARTBEAT ACK may remain queued on control_chunk_list instead of being transmitted immediately. If the peer transport is removed while the chunk is still queued, sctp_assoc_rm_peer() drops the transport and schedules it for RCU freeing, but only clears cached transport pointers in out_chunk_list. The queued control chunk therefore retains a dangling transport pointer. Once an ASCONF_ACK clears the suppression and the queued control chunk is transmitted, SCTP dereferences the stale transport pointer, leading to a use-after-free. Fix this by also clearing chunk->transport for queued control chunks in control_chunk_list when removing the transport. | ||||
| CVE-2026-74690 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/ism: Fix UAF of sba and ieq during ism_dev_exit() A ism interrupt handler can be active in parallel with ism_dev_exit(), accessing freed data structures. No new interrupts will be generated after unregister_ieq(). Drain ongoing interrupt handlers by free_irq(), before freeing ism data structures. | ||||
| CVE-2026-74696 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: fix TFO max_qlen accounting across reuseport migration A listener's TCP_FASTOPEN max_qlen stops being accurate and lets through far more pending Fast Open requests than it was configured for. This only shows up with SO_REUSEPORT listener migration, where closing a listener hands its still-pending TFO children over to a surviving one. fastopenq.qlen is charged in tcp_fastopen_create_child() when the child is created and uncharged in reqsk_fastopen_remove() when the handshake completes. The uncharge follows rsk_listener of the request the child points at, and inet_reqsk_clone() has repointed the child at a new request owned by the new listener, so the ++ and the -- land on two different sockets. The new listener's qlen drifts negative and its limit no longer binds. Charge the new listener during migration, like reqsk_queue_migrated() already does for queue->young and queue->qlen. | ||||
| CVE-2026-74702 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: reject feature changes after endpoint vhost_scsi_setup_vq_cmds() runs from VHOST_SCSI_SET_ENDPOINT and allocates each command's protection scatterlist array (prot_sgl) according to the acknowledged VIRTIO_SCSI_F_T10_PI bit. The command pools are not rebuilt when VHOST_SET_FEATURES changes that bit later. Although virtio feature bits must not change after feature negotiation, vhost_scsi_set_features() currently accepts such a request after the endpoint is active and updates acked_features. Enabling T10-PI after endpoint setup therefore leaves prot_sgl NULL while the I/O path follows the new feature bit. For a 129-page protection payload, vhost_scsi_mapal() passes the missing first chunk to sg_alloc_table_chained(): sg_alloc_table_chained(table, 129, first_chunk=NULL, nents_first_chunk=inline_sg_cnt) sg_pool_index() then hits: BUG_ON(nents > SG_CHUNK_SIZE); /* 129 > 128 */ The kernel reported the following call trace and register state: Call Trace: <TASK> ? __sg_alloc_table+0x1d8/0x250 ? __pfx_vhost_run_work_list+0x10/0x10 [vhost] sg_alloc_table_chained+0x59/0xf0 ? __pfx_sg_pool_alloc+0x10/0x10 ? vhost_scsi_calc_sgls.constprop.0+0x43/0x60 [vhost_scsi] vhost_scsi_handle_vq+0xf02/0x1700 [vhost_scsi] ? __pfx_vhost_scsi_handle_vq+0x10/0x10 [vhost_scsi] vhost_scsi_handle_kick+0x37/0x50 [vhost_scsi] vhost_run_work_list+0x8e/0xd0 [vhost] vhost_task_fn+0xe1/0x210 ret_from_fork+0x348/0x540 </TASK> RIP: 0010:0x4 CR2 = 0x4 RSP: 0018:ffffc90000dbf940 EFLAGS: 00010202 RAX: ffffffff82396810 RBX: ffff88811dc28b80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000820 RDI: 0000000000000081 VHOST_F_LOG_ALL is a vhost-specific runtime feature and remains the only exception. Reject changes to any feature other than VHOST_F_LOG_ALL while the endpoint is active. This preserves the existing runtime log toggle while preventing feature-dependent command resources and data-path state from becoming inconsistent. Userspace must clear the endpoint before changing any other negotiated feature and set the endpoint up again afterward. | ||||
| CVE-2026-74703 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: Validate T10 PI scatterlist counts When T10 PI is negotiated, vhost-scsi splits protection bytes from the data iterator before mapping the request scatterlists. A malformed request can claim protection bytes that cover or exceed the full payload length. The former leaves no data bytes to map, while the latter underflows exp_data_len before advancing the iterator. Both cases can let a zero data SGL count reach sg_alloc_table_chained(), which triggers BUG_ON(!nents). Reject protection lengths that cover or exceed the payload before subtracting prot_bytes and advancing the iterator. Also propagate negative errors from the protection SGL calculation before calling the allocator, matching the data SGL path. | ||||
| CVE-2026-18100 | 2026-08-25 | 6.4 Medium | ||
| The MetForm – Contact Form, Survey, Quiz, & Custom Form Builder for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'mf_form_id' Widget Setting in all versions up to, and including, 4.1.8 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The payload bypasses Elementor's save-time wp_kses_post filter because it contains no HTML tags, and MetForm's own str_replace transformation of script tags into JavaScript template literal expressions provides an additional delivery path. | ||||
| CVE-2026-16601 | 2026-08-25 | 8.8 High | ||
| The CM Map Locations – Visualize and share your locations in a few clicks plugin for WordPress is vulnerable to Limited Arbitrary File Upload in all versions up to, and including, 2.1.8 via the uploadMedia function. This is due to insufficient file type validation in the upload handler, which performs incomplete extension filtering without MIME-type checks or upload capability verification before passing attacker-supplied files to move_uploaded_file(). This makes it possible for authenticated attackers, with subscriber-level access and above, to upload files that may be executable, which makes remote code execution possible. The required nonce is exposed to any logged-in Subscriber via the CMLOC_Editor_Images JavaScript object on the front-end location editor page. | ||||
| CVE-2026-19499 | 2026-08-25 | 6.8 Medium | ||
| A flaw was found in glibc. The strfmon and strfmon_l functions are vulnerable to a buffer overflow when processing right-justified width padding. This occurs because an incorrect length is used for an internal memory operation, causing data to be written beyond its intended buffer. An attacker could exploit this by providing specially crafted input, potentially leading to arbitrary code execution or other severe impacts. | ||||
| CVE-2026-74597 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: clear skb2->cb[] in ip6ip6_err() ip6ip6_err() clones an outer IPv6 ICMP error skb, pulls it to the quoted inner IPv6 packet, and then passes the clone to icmpv6_send(). The clone still carries the outer packet's inet6_skb_parm in skb->cb. If the outer packet had a Home Address Option, IP6CB(skb2)->dsthao remains non-zero after skb_pull(). icmpv6_send() later calls mip6_addr_swap(), which uses that stale dsthao offset against the quoted inner packet. A malformed inner destination-options header can then make the HAO lookup and address swap run past the end of the quoted packet and corrupt skb_shared_info. Clear skb2->cb[] before pulling the quoted inner IPv6 packet so the reply path does not reuse metadata left by the outer IPv6 stack. | ||||
| CVE-2026-74641 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: bound the hwdep mmap fault offset snd_us428ctls_vm_fault() turns the faulting page offset into a kernel address with no bound of any kind: offset = vmf->pgoff << PAGE_SHIFT; vaddr = (char *)(...)->us428ctls_sharedmem + offset; page = virt_to_page(vaddr); get_page(page); vmf->page = page; return 0; snd_us428ctls_mmap() checks only the length of the mapping, never the offset, and us428ctls_sharedmem is a single page from alloc_pages_exact(). For a character device file_mmap_size_max() returns ULONG_MAX, so the mm layer imposes no ceiling either. Every page offset above zero resolves to a struct page outside the object, and the handler installs it into the caller's address space read-write; the vma is not marked read-only. The caller picks the page frame with a single mmap() argument and gets read-write access to a page of kernel memory it does not own; an offset that lands in an unpopulated vmemmap region oopses instead. A process that can open the hwdep node of an attached US-X2Y reaches this after loading the FPGA image through the same node; no capability check is involved. On 7.2.0-rc5 (arm64), mmap() with a large offset: Unable to handle kernel paging request at virtual address fffffdffc45d5ac8 pc : snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y] Call trace: snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y] __do_fault __handle_mm_fault handle_mm_fault el0_da Reject any offset outside the shared region. The pcm hwdep handler in usx2yhwdeppcm.c computes its address the same way and needs the same bound. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74651 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in rtw_get_wpa_ie() rtw_get_wpa_ie() reads bytes at fixed offsets into a vendor-specific information element without checking that the element is long enough, causing an out-of-bounds read for a short trailing IE. The function locates a vendor-specific IE (EID 221) with rtw_get_ie() and then compares a 4-byte OUI+type at pbuf + 2 and reads a 2-byte version word at pbuf + 6. Those accesses require the IE body to be at least 6 bytes, but rtw_get_ie() only guarantees that the element fits within the buffer; it does not enforce a minimum body length. A vendor-specific IE whose length byte is 0 to 5, placed at the end of the buffer, therefore makes these reads run past the end of the IE and past the end of the buffer itself. The buffer holds information elements taken from received management frames and from the IE blob passed to rtw_cfg80211_set_wpa_ie(), which is kmemdup'd to its exact length, so the read can run off the end of the allocation. The sibling helpers rtw_get_sec_ie(), rtw_get_wapi_ie() and rtw_get_wps_ie() in this file already reject too-short vendor-specific IEs before their OUI memcmp(); rtw_get_wpa_ie() was never brought in line with them, and needs a minimum of 6 rather than 4 bytes because of the version word. Add the missing length check. | ||||
| CVE-2026-74652 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: serial: amba-pl011: cancel RS485 hrtimers after freeing IRQ The RS485 trigger hrtimers are embedded in the devm-managed port and can fire after it is freed. The IRQ handler can arm a timer, so free the IRQ first and then cancel both timers. Complete the RS485 stop without arming a timer, and cancel the timers in remove() for the suspend-then-unbind path, where shutdown is not called. This issue was found by an in-house static analysis tool. | ||||