Export limit exceeded: 348500 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (348500 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43230 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: Clear reconnect pending bit When canceling the reconnect worker, care must be taken to reset the reconnect-pending bit. If the reconnect worker has not yet been scheduled before it is canceled, the reconnect-pending bit will stay on forever. | ||||
| CVE-2026-43229 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix device cleanup order to prevent kernel panic Move video device unregistration to the beginning of the remove function to ensure all video operations are stopped before cleaning up the worker thread and disabling PM runtime. This prevents hardware register access after the device has been powered down. In polling mode, the hrtimer periodically triggers wave5_vpu_timer_callback() which queues work to the kthread worker. The worker executes wave5_vpu_irq_work_fn() which reads hardware registers via wave5_vdi_read_register(). The original cleanup order disabled PM runtime and powered down hardware before unregistering video devices. When autosuspend triggers and powers off the hardware, the video devices are still registered and the worker thread can still be triggered by the hrtimer, causing it to attempt reading registers from powered-off hardware. This results in a bus error (synchronous external abort) and kernel panic. This causes random kernel panics during encoding operations: Internal error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP Modules linked in: wave5 rpmsg_ctrl rpmsg_char ... CPU: 0 UID: 0 PID: 1520 Comm: vpu_irq_thread Tainted: G M W pc : wave5_vdi_read_register+0x10/0x38 [wave5] lr : wave5_vpu_irq_work_fn+0x28/0x60 [wave5] Call trace: wave5_vdi_read_register+0x10/0x38 [wave5] kthread_worker_fn+0xd8/0x238 kthread+0x104/0x120 ret_from_fork+0x10/0x20 Code: aa1e03e9 d503201f f9416800 8b214000 (b9400000) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: synchronous external abort: Fatal exception | ||||
| CVE-2026-43228 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hfs: Replace BUG_ON with error handling for CNID count checks In a06ec283e125 next_id, folder_count, and file_count in the super block info were expanded to 64 bits, and BUG_ONs were added to detect overflow. This triggered an error reported by syzbot: if the MDB is corrupted, the BUG_ON is triggered. This patch replaces this mechanism with proper error handling and resolves the syzbot reported bug. Singed-off-by: Jori Koolstra <jkoolstra@xs4all.nl> | ||||
| CVE-2026-43227 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clocksource/drivers/sh_tmu: Always leave device running after probe The TMU device can be used as both a clocksource and a clockevent provider. The driver tries to be smart and power itself on and off, as well as enabling and disabling its clock when it's not in operation. This behavior is slightly altered if the TMU is used as an early platform device in which case the device is left powered on after probe, but the clock is still enabled and disabled at runtime. This has worked for a long time, but recent improvements in PREEMPT_RT and PROVE_LOCKING have highlighted an issue. As the TMU registers itself as a clockevent provider, clockevents_register_device(), it needs to use raw spinlocks internally as this is the context of which the clockevent framework interacts with the TMU driver. However in the context of holding a raw spinlock the TMU driver can't really manage its power state or clock with calls to pm_runtime_*() and clk_*() as these calls end up in other platform drivers using regular spinlocks to control power and clocks. This mix of spinlock contexts trips a lockdep warning. ============================= [ BUG: Invalid wait context ] 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 Not tainted ----------------------------- swapper/0/0 is trying to lock: ffff000008c9e180 (&dev->power.lock){-...}-{3:3}, at: __pm_runtime_resume+0x38/0x88 other info that might help us debug this: context-{5:5} 1 lock held by swapper/0/0: ccree e6601000.crypto: ARM CryptoCell 630P Driver: HW version 0xAF400001/0xDCC63000, Driver version 5.0 #0: ffff8000817ec298 ccree e6601000.crypto: ARM ccree device initialized (tick_broadcast_lock){-...}-{2:2}, at: __tick_broadcast_oneshot_control+0xa4/0x3a8 stack backtrace: CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 PREEMPT Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) Call trace: show_stack+0x14/0x1c (C) dump_stack_lvl+0x6c/0x90 dump_stack+0x14/0x1c __lock_acquire+0x904/0x1584 lock_acquire+0x220/0x34c _raw_spin_lock_irqsave+0x58/0x80 __pm_runtime_resume+0x38/0x88 sh_tmu_clock_event_set_oneshot+0x84/0xd4 clockevents_switch_state+0xfc/0x13c tick_broadcast_set_event+0x30/0xa4 __tick_broadcast_oneshot_control+0x1e0/0x3a8 tick_broadcast_oneshot_control+0x30/0x40 cpuidle_enter_state+0x40c/0x680 cpuidle_enter+0x30/0x40 do_idle+0x1f4/0x280 cpu_startup_entry+0x34/0x40 kernel_init+0x0/0x130 do_one_initcall+0x0/0x230 __primary_switched+0x88/0x90 For non-PREEMPT_RT builds this is not really an issue, but for PREEMPT_RT builds where normal spinlocks can sleep this might be an issue. Be cautious and always leave the power and clock running after probe. | ||||
| CVE-2026-43226 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: No shortcut out of RDS_CONN_ERROR RDS connections carry a state "rds_conn_path::cp_state" and transitions from one state to another and are conditional upon an expected state: "rds_conn_path_transition." There is one exception to this conditionality, which is "RDS_CONN_ERROR" that can be enforced by "rds_conn_path_drop" regardless of what state the condition is currently in. But as soon as a connection enters state "RDS_CONN_ERROR", the connection handling code expects it to go through the shutdown-path. The RDS/TCP multipath changes added a shortcut out of "RDS_CONN_ERROR" straight back to "RDS_CONN_CONNECTING" via "rds_tcp_accept_one_path" (e.g. after "rds_tcp_state_change"). A subsequent "rds_tcp_reset_callbacks" can then transition the state to "RDS_CONN_RESETTING" with a shutdown-worker queued. That'll trip up "rds_conn_init_shutdown", which was never adjusted to handle "RDS_CONN_RESETTING" and subsequently drops the connection with the dreaded "DR_INV_CONN_STATE", which leaves "RDS_SHUTDOWN_WORK_QUEUED" on forever. So we do two things here: a) Don't shortcut "RDS_CONN_ERROR", but take the longer path through the shutdown code. b) Add "RDS_CONN_RESETTING" to the expected states in "rds_conn_init_shutdown" so that we won't error out and get stuck, if we ever hit weird state transitions like this again." | ||||
| CVE-2026-43225 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix memory leak on failure path cfg80211_inform_bss_frame() may return NULL on failure. In that case, the allocated buffer 'buf' is not freed and the function returns early, leading to potential memory leak. Fix this by ensuring that 'buf' is freed on both success and failure paths. | ||||
| CVE-2026-43224 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/zcrx: fix sgtable leak on mapping failures In an unlikely case when io_populate_area_dma() fails, which could only happen on a PAGE_POOL_32BIT_ARCH_WITH_64BIT_DMA machine, io_zcrx_map_area() will have an initialised and not freed table. It was supposed to be cleaned up in the error path, but !is_mapped prevents that. | ||||
| CVE-2026-43223 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: pvrusb2: fix URB leak in pvr2_send_request_ex When pvr2_send_request_ex() submits a write URB successfully but fails to submit the read URB (e.g. returns -ENOMEM), it returns immediately without waiting for the write URB to complete. Since the driver reuses the same URB structure, a subsequent call to pvr2_send_request_ex() attempts to submit the still-active write URB, triggering a 'URB submitted while active' warning in usb_submit_urb(). Fix this by ensuring the write URB is unlinked and waited upon if the read URB submission fails. | ||||
| CVE-2026-43222 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: AV1: Fix tile info buffer size Each tile info is composed of: row_sb, col_sb, start_pos and end_pos (4 bytes each). So the total required memory is AV1_MAX_TILES * 16 bytes. Use the correct #define to allocate the buffer and avoid writing tile info in non-allocated memory. | ||||
| CVE-2026-43221 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: ipmb: initialise event handler read bytes IPMB doesn't use i2c reads, but the handler needs to set a value. Otherwise an i2c read will return an uninitialised value from the bus driver. | ||||
| CVE-2026-43220 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: serialize sequence allocation under concurrent TLB invalidations With concurrent TLB invalidations, completion wait randomly gets timed out because cmd_sem_val was incremented outside the IOMMU spinlock, allowing CMD_COMPL_WAIT commands to be queued out of sequence and breaking the ordering assumption in wait_on_sem(). Move the cmd_sem_val increment under iommu->lock so completion sequence allocation is serialized with command queuing. And remove the unnecessary return. | ||||
| CVE-2026-43219 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: cpsw_new: Fix potential unregister of netdev that has not been registered yet If an error occurs during register_netdev() for the first MAC in cpsw_register_ports(), even though cpsw->slaves[0].ndev is set to NULL, cpsw->slaves[1].ndev would remain unchanged. This could later cause cpsw_unregister_ports() to attempt unregistering the second MAC. To address this, add a check for ndev->reg_state before calling unregister_netdev(). With this change, setting cpsw->slaves[i].ndev to NULL becomes unnecessary and can be removed accordingly. | ||||
| CVE-2026-43218 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: i2c/tw9903: Fix potential memory leak in tw9903_probe() In one of the error paths in tw9903_probe(), the memory allocated in v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that by calling v4l2_ctrl_handler_free() on the handler in that error path. | ||||
| CVE-2026-43217 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: iris: gen2: Add sanity check for session stop In iris_kill_session, inst->state is set to IRIS_INST_ERROR and session_close is executed, which will kfree(inst_hfi_gen2->packet). If stop_streaming is called afterward, it will cause a crash. Add a NULL check for inst_hfi_gen2->packet before sendling STOP packet to firmware to fix that. | ||||
| CVE-2026-43216 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: Drop the lock in skb_may_tx_timestamp() skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must not be taken in IRQ context, only softirq is okay. A few drivers receive the timestamp via a dedicated interrupt and complete the TX timestamp from that handler. This will lead to a deadlock if the lock is already write-locked on the same CPU. Taking the lock can be avoided. The socket (pointed by the skb) will remain valid until the skb is released. The ->sk_socket and ->file member will be set to NULL once the user closes the socket which may happen before the timestamp arrives. If we happen to observe the pointer while the socket is closing but before the pointer is set to NULL then we may use it because both pointer (and the file's cred member) are RCU freed. Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a matching WRITE_ONCE() where the pointer are cleared. | ||||
| CVE-2026-43215 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cifs: Fix locking usage for tcon fields We used to use the cifs_tcp_ses_lock to protect a lot of objects that are not just the server, ses or tcon lists. We later introduced srv_lock, ses_lock and tc_lock to protect fields within the corresponding structs. This was done to provide a more granular protection and avoid unnecessary serialization. There were still a couple of uses of cifs_tcp_ses_lock to provide tcon fields. In this patch, I've replaced them with tc_lock. | ||||
| CVE-2026-43214 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Add SRCU protection for reading PDPTRs in __get_sregs2() Add SRCU read-side protection when reading PDPTR registers in __get_sregs2(). Reading PDPTRs may trigger access to guest memory: kvm_pdptr_read() -> svm_cache_reg() -> load_pdptrs() -> kvm_vcpu_read_guest_page() -> kvm_vcpu_gfn_to_memslot() kvm_vcpu_gfn_to_memslot() dereferences memslots via __kvm_memslots(), which uses srcu_dereference_check() and requires either kvm->srcu or kvm->slots_lock to be held. Currently only vcpu->mutex is held, triggering lockdep warning: ============================= WARNING: suspicious RCU usage in kvm_vcpu_gfn_to_memslot 6.12.59+ #3 Not tainted include/linux/kvm_host.h:1062 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz.5.1717/15100: #0: ff1100002f4b00b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x1d5/0x1590 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xf0/0x120 lib/dump_stack.c:120 lockdep_rcu_suspicious+0x1e3/0x270 kernel/locking/lockdep.c:6824 __kvm_memslots include/linux/kvm_host.h:1062 [inline] __kvm_memslots include/linux/kvm_host.h:1059 [inline] kvm_vcpu_memslots include/linux/kvm_host.h:1076 [inline] kvm_vcpu_gfn_to_memslot+0x518/0x5e0 virt/kvm/kvm_main.c:2617 kvm_vcpu_read_guest_page+0x27/0x50 virt/kvm/kvm_main.c:3302 load_pdptrs+0xff/0x4b0 arch/x86/kvm/x86.c:1065 svm_cache_reg+0x1c9/0x230 arch/x86/kvm/svm/svm.c:1688 kvm_pdptr_read arch/x86/kvm/kvm_cache_regs.h:141 [inline] __get_sregs2 arch/x86/kvm/x86.c:11784 [inline] kvm_arch_vcpu_ioctl+0x3e20/0x4aa0 arch/x86/kvm/x86.c:6279 kvm_vcpu_ioctl+0x856/0x1590 virt/kvm/kvm_main.c:4663 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xbd/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2026-43213 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: pci: validate sequence number of TX release report Hardware rarely reports abnormal sequence number in TX release report, which will access out-of-bounds of wd_ring->pages array, causing NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 1085 Comm: irq/129-rtw89_p Tainted: G S U 6.1.145-17510-g2f3369c91536 #1 (HASH:69e8 1) Call Trace: <IRQ> rtw89_pci_release_tx+0x18f/0x300 [rtw89_pci (HASH:4c83 2)] rtw89_pci_napi_poll+0xc2/0x190 [rtw89_pci (HASH:4c83 2)] net_rx_action+0xfc/0x460 net/core/dev.c:6578 net/core/dev.c:6645 net/core/dev.c:6759 handle_softirqs+0xbe/0x290 kernel/softirq.c:601 ? rtw89_pci_interrupt_threadfn+0xc5/0x350 [rtw89_pci (HASH:4c83 2)] __local_bh_enable_ip+0xeb/0x120 kernel/softirq.c:499 kernel/softirq.c:423 </IRQ> <TASK> rtw89_pci_interrupt_threadfn+0xf8/0x350 [rtw89_pci (HASH:4c83 2)] ? irq_thread+0xa7/0x340 kernel/irq/manage.c:0 irq_thread+0x177/0x340 kernel/irq/manage.c:1205 kernel/irq/manage.c:1314 ? thaw_kernel_threads+0xb0/0xb0 kernel/irq/manage.c:1202 ? irq_forced_thread_fn+0x80/0x80 kernel/irq/manage.c:1220 kthread+0xea/0x110 kernel/kthread.c:376 ? synchronize_irq+0x1a0/0x1a0 kernel/irq/manage.c:1287 ? kthread_associate_blkcg+0x80/0x80 kernel/kthread.c:331 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> To prevent crash, validate rpp_info.seq before using. | ||||
| CVE-2026-43212 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Make cpumask_of_node() robust against NUMA_NO_NODE The arch definition of cpumask_of_node() cannot handle NUMA_NO_NODE - which is a valid index - so add a check for this. | ||||
| CVE-2026-43211 | 1 Linux | 1 Linux Kernel | 2026-05-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: PCI: Fix pci_slot_trylock() error handling Commit a4e772898f8b ("PCI: Add missing bridge lock to pci_bus_lock()") delegates the bridge device's pci_dev_trylock() to pci_bus_trylock() in pci_slot_trylock(), but it forgets to remove the corresponding pci_dev_unlock() when pci_bus_trylock() fails. Before a4e772898f8b, the code did: if (!pci_dev_trylock(dev)) /* <- lock bridge device */ goto unlock; if (dev->subordinate) { if (!pci_bus_trylock(dev->subordinate)) { pci_dev_unlock(dev); /* <- unlock bridge device */ goto unlock; } } After a4e772898f8b the bridge-device lock is no longer taken, but the pci_dev_unlock(dev) on the failure path was left in place, leading to the bug. This yields one of two errors: 1. A warning that the lock is being unlocked when no one holds it. 2. An incorrect unlock of a lock that belongs to another thread. Fix it by removing the now-redundant pci_dev_unlock(dev) on the failure path. [Same patch later posted by Keith at https://patch.msgid.link/20260116184150.3013258-1-kbusch@meta.com] | ||||