Export limit exceeded: 360533 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (360533 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-52979 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: psp: check for device unregister when creating assoc psp_assoc_device_get_locked() obtains a psp_dev reference via psp_dev_get_for_sock() (which uses psp_dev_tryget() under RCU); it then acquires psd->lock and drops the reference. Before the lock is taken, psp_dev_unregister() can run to completion: take psd->lock, clear out state, unlock, drop the registration reference. The expectation is that the lock prevents device unregistration, but much like with netdevs special care has to be taken when "upgrading" a reference to a locked device. Add the missing check if device is still alive. psp_dev_is_registered() exists already but had no callers, which makes me wonder if I either forgot to add this or lost the check during refactoring... | ||||
| CVE-2026-52978 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: psp: require admin permission for dev-set and key-rotate The dev-set and key-rotate netlink operations modify shared device state (PSP version configuration and cryptographic key material, respectively) but do not require CAP_NET_ADMIN. The only access control is psp_dev_check_access() which merely verifies netns membership. | ||||
| CVE-2026-52977 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: futex: Prevent lockup in requeue-PI during signal/ timeout wakeup During wait-requeue-pi (task A) and requeue-PI (task B) the following race can happen: Task A Task B futex_wait_requeue_pi() futex_setup_timer() futex_do_wait() futex_requeue() CLASS(hb, hb1)(&key1); CLASS(hb, hb2)(&key2); *timeout* futex_requeue_pi_wakeup_sync() requeue_state = Q_REQUEUE_PI_IGNORE *blocks on hb->lock* futex_proxy_trylock_atomic() futex_requeue_pi_prepare() Q_REQUEUE_PI_IGNORE => -EAGAIN double_unlock_hb(hb1, hb2) *retry* Task B acquires both hb locks and attempts to acquire the PI-lock of the top most waiter (task B). Task A is leaving early due to a signal/ timeout and started removing itself from the queue. It updates its requeue_state but can not remove it from the list because this requires the hb lock which is owned by task B. Usually task A is able to swoop the lock after task B unlocked it. However if task B is of higher priority then task A may not be able to wake up in time and acquire the lock before task B gets it again. Especially on a UP system where A is never scheduled. As a result task A blocks on the lock and task B busy loops, trying to make progress but live locks the system instead. Tragic. This can be fixed by removing the top most waiter from the list in this case. This allows task B to grab the next top waiter (if any) in the next iteration and make progress. Remove the top most waiter if futex_requeue_pi_prepare() fails. Let the waiter conditionally remove itself from the list in handle_early_requeue_pi_wakeup(). | ||||
| CVE-2026-52976 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl() Two error handling issues exist in xe_exec_queue_create_ioctl(): 1. When xe_hw_engine_group_add_exec_queue() fails, the error path jumps to put_exec_queue which skips xe_exec_queue_kill(). If the VM is in preempt fence mode, xe_vm_add_compute_exec_queue() has already added the queue to the VM's compute exec queue list. Skipping the kill leaves the queue on that list, leading to a dangling pointer after the queue is freed. 2. When xa_alloc() fails after xe_hw_engine_group_add_exec_queue() has succeeded, the error path does not call xe_hw_engine_group_del_exec_queue() to remove the queue from the hw engine group list. The queue is then freed while still linked into the hw engine group, causing a use-after-free. Fix both by: - Changing the xe_hw_engine_group_add_exec_queue() failure path to jump to kill_exec_queue so that xe_exec_queue_kill() properly removes the queue from the VM's compute list. - Adding a del_hw_engine_group label before kill_exec_queue for the xa_alloc() failure path, which removes the queue from the hw engine group before proceeding with the rest of the cleanup. (cherry picked from commit 37c831f401746a45d510b312b0ed7a77b1e06ec8) | ||||
| CVE-2026-52975 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bonding: 3ad: implement proper RCU rules for port->aggregator syzbot found a data-race in bond_3ad_get_active_agg_info / bond_3ad_state_machine_handler [1] which hints at lack of proper RCU implementation. Add __rcu qualifier to port->aggregator, and add proper RCU API. [1] BUG: KCSAN: data-race in bond_3ad_get_active_agg_info / bond_3ad_state_machine_handler write to 0xffff88813cf5c4b0 of 8 bytes by task 36 on cpu 0: ad_port_selection_logic drivers/net/bonding/bond_3ad.c:1659 [inline] bond_3ad_state_machine_handler+0x9d5/0x2d60 drivers/net/bonding/bond_3ad.c:2569 process_one_work kernel/workqueue.c:3302 [inline] process_scheduled_works+0x4f0/0x9c0 kernel/workqueue.c:3385 worker_thread+0x58a/0x780 kernel/workqueue.c:3466 kthread+0x22a/0x280 kernel/kthread.c:436 ret_from_fork+0x146/0x330 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 read to 0xffff88813cf5c4b0 of 8 bytes by task 22063 on cpu 1: __bond_3ad_get_active_agg_info drivers/net/bonding/bond_3ad.c:2858 [inline] bond_3ad_get_active_agg_info+0x8c/0x230 drivers/net/bonding/bond_3ad.c:2881 bond_fill_info+0xe0f/0x10f0 drivers/net/bonding/bond_netlink.c:853 rtnl_link_info_fill net/core/rtnetlink.c:906 [inline] rtnl_link_fill+0x1d7/0x4e0 net/core/rtnetlink.c:927 rtnl_fill_ifinfo+0xf8e/0x1380 net/core/rtnetlink.c:2168 rtmsg_ifinfo_build_skb+0x11c/0x1b0 net/core/rtnetlink.c:4453 rtmsg_ifinfo_event net/core/rtnetlink.c:4486 [inline] rtmsg_ifinfo+0x6d/0x110 net/core/rtnetlink.c:4495 __dev_notify_flags+0x76/0x390 net/core/dev.c:9790 netif_change_flags+0xac/0xd0 net/core/dev.c:9823 do_setlink+0x905/0x2950 net/core/rtnetlink.c:3180 rtnl_group_changelink net/core/rtnetlink.c:3813 [inline] __rtnl_newlink net/core/rtnetlink.c:3981 [inline] rtnl_newlink+0xf55/0x1400 net/core/rtnetlink.c:4109 rtnetlink_rcv_msg+0x64b/0x720 net/core/rtnetlink.c:6995 netlink_rcv_skb+0x123/0x220 net/netlink/af_netlink.c:2550 rtnetlink_rcv+0x1c/0x30 net/core/rtnetlink.c:7022 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x5a8/0x680 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x5c8/0x6f0 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:787 [inline] __sock_sendmsg net/socket.c:802 [inline] ____sys_sendmsg+0x563/0x5b0 net/socket.c:2698 ___sys_sendmsg+0x195/0x1e0 net/socket.c:2752 __sys_sendmsg net/socket.c:2784 [inline] __do_sys_sendmsg net/socket.c:2789 [inline] __se_sys_sendmsg net/socket.c:2787 [inline] __x64_sys_sendmsg+0xd4/0x160 net/socket.c:2787 x64_sys_call+0x194c/0x3020 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x12c/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f value changed: 0x0000000000000000 -> 0xffff88813cf5c400 Reported by Kernel Concurrency Sanitizer on: CPU: 1 UID: 0 PID: 22063 Comm: syz.0.31122 Tainted: G W syzkaller #0 PREEMPT(full) Tainted: [W]=WARN Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026 | ||||
| CVE-2026-52974 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: tls: fix strparser anchor skb leak on offload RX setup failure When tls_set_device_offload_rx() fails at tls_dev_add(), the error path calls tls_sw_free_resources_rx() to clean up the SW context that was initialized by tls_set_sw_offload(). This function calls tls_sw_release_resources_rx() (which stops the strparser via tls_strp_stop()) and tls_sw_free_ctx_rx() (which kfrees the context), but never frees the anchor skb that was allocated by alloc_skb(0) in tls_strp_init(). Note that tls_sw_free_resources_rx() is exclusively used for this "failed to start offload" code path, there's no other caller. The leak did not exist before commit 84c61fe1a75b ("tls: rx: do not use the standard strparser"), because the standard strparser doesn't try to pre-allocate an skb. The normal close path in tls_sk_proto_close() handles cleanup by calling tls_sw_strparser_done() (which calls tls_strp_done()) after dropping the socket lock, because tls_strp_done() does cancel_work_sync() and the strparser work handler takes the socket lock. | ||||
| CVE-2026-52973 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: futex: Drop CLONE_THREAD requirement for private default hash alloc Currently need_futex_hash_allocate_default() depends on strict pthread semantics, abusing CLONE_THREAD. This breaks the non-concurrency assumptions when doing the mm->futex_ref pcpu allocations, leading to bugs[0] when sharing the mm in other ways; ie: BUG: KASAN: slab-use-after-free in futex_hash_put ... where the +1 bias can end up on a percpu counter that mm->futex_ref no longer points at. Loosen the check to cover any CLONE_VM clone, except vfork(). Excluding vfork keeps the existing paths untouched (no overhead), and we can't race in the first place: either the parent is suspended and the child runs alone, or mm->futex_ref is already allocated from an earlier CLONE_VM. | ||||
| CVE-2026-52972 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Cap AEAD AD length to 0x80000000 In order to prevent arithmetic overflows when checking the TX buffer size, cap the associated data length to 0x80000000. | ||||
| CVE-2026-52971 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ena: PHC: Fix potential use-after-free in get_timestamp Move the phc->active check and resp pointer assignment to after acquiring the spinlock. Previously, phc->active was checked without holding the lock, and resp was cached from ena_dev->phc.virt_addr before the lock was acquired. If ena_com_phc_destroy() runs between the lockless active check and the lock acquisition, it sets active=false, releases the lock, frees the DMA memory, and sets virt_addr=NULL. The get_timestamp path would then read a NULL virt_addr and dereference it. With both the active check and the pointer read under the lock, destroy cannot free the memory while get_timestamp is using it. | ||||
| CVE-2026-52970 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: fix missing expect put in obj eval nft_ct_expect_obj_eval() allocates an expectation and may call nf_ct_expect_related(), but never drops its local reference. Add nf_ct_expect_put(exp) before return to balance allocation. | ||||
| CVE-2026-52967 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: fix possible infinite loop and oob read in symlink_data() On 32-bit architectures, the infinite loop is as follows: len = p->ErrorDataLength == 0xfffffff8 u8 *next = p->ErrorContextData + len next == p On 32-bit architectures, the out-of-bounds read is as follows: len = p->ErrorDataLength == 0xfffffff0 u8 *next = p->ErrorContextData + len next == (u8 *)p - 8 | ||||
| CVE-2026-52964 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Bound MIDI 2.0 endpoint descriptor scans The USB MIDI 2.0 endpoint parser has the same descriptor walking pattern as the legacy MIDI parser. It validates bLength against bNumGrpTrmBlock before reading baAssoGrpTrmBlkID[], but not against the remaining bytes in the endpoint-extra scan. A malformed device can therefore make later baAssoGrpTrmBlkID[] reads consume bytes past the walked descriptor. Reject zero-length and overlong descriptors while walking endpoint extras. | ||||
| CVE-2026-52961 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix BUG_ON in __ceph_build_xattrs_blob() due to stale blob size The generic/642 test-case can reproduce the kernel crash: [40243.605254] ------------[ cut here ]------------ [40243.605956] kernel BUG at fs/ceph/xattr.c:918! [40243.607142] Oops: invalid opcode: 0000 [#1] SMP PTI [40243.608067] CPU: 7 UID: 0 PID: 498762 Comm: kworker/7:1 Not tainted 7.0.0-rc7+ #3 PREEMPT(full) [40243.609700] Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [40243.611820] Workqueue: ceph-msgr ceph_con_workfn [40243.612715] RIP: 0010:__ceph_build_xattrs_blob+0x1b8/0x1e0 [40243.613731] Code: 0f 84 82 fe ff ff e9 cf 8e 56 ff 48 8d 65 e8 31 c0 5b 41 5c 41 5d 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 c3 cc cc cc cc <0f> 0b 4c 8b 62 08 41 8b 85 24 07 00 00 49 83 c4 04 41 89 44 24 fc [40243.616888] RSP: 0018:ffffcc80c4d4b688 EFLAGS: 00010287 [40243.617773] RAX: 0000000000010026 RBX: 0000000000000001 RCX: 0000000000000000 [40243.618928] RDX: ffff8a773798dee0 RSI: 0000000000000000 RDI: 0000000000000000 [40243.620158] RBP: ffffcc80c4d4b6a0 R08: 0000000000000000 R09: 0000000000000000 [40243.621573] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a75f3b58000 [40243.622907] R13: ffff8a75f3b58000 R14: 0000000000000080 R15: 000000000000bffd [40243.624054] FS: 0000000000000000(0000) GS:ffff8a787d1b4000(0000) knlGS:0000000000000000 [40243.625331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [40243.626269] CR2: 000072f390b623c0 CR3: 000000011c02a003 CR4: 0000000000372ef0 [40243.627408] Call Trace: [40243.627839] <TASK> [40243.628188] __prep_cap+0x3fd/0x4a0 [40243.628789] ? do_raw_spin_unlock+0x4e/0xe0 [40243.629474] ceph_check_caps+0x46a/0xc80 [40243.630094] ? __lock_acquire+0x4a2/0x2650 [40243.630773] ? find_held_lock+0x31/0x90 [40243.631347] ? handle_cap_grant+0x79f/0x1060 [40243.632068] ? lock_release+0xd9/0x300 [40243.632696] ? __mutex_unlock_slowpath+0x3e/0x340 [40243.633429] ? lock_release+0xd9/0x300 [40243.634052] handle_cap_grant+0xcf6/0x1060 [40243.634745] ceph_handle_caps+0x122b/0x2110 [40243.635415] mds_dispatch+0x5bd/0x2160 [40243.636034] ? ceph_con_process_message+0x65/0x190 [40243.636828] ? lock_release+0xd9/0x300 [40243.637431] ceph_con_process_message+0x7a/0x190 [40243.638184] ? kfree+0x311/0x4f0 [40243.638749] ? kfree+0x311/0x4f0 [40243.639268] process_message+0x16/0x1a0 [40243.639915] ? sg_free_table+0x39/0x90 [40243.640572] ceph_con_v2_try_read+0xf58/0x2120 [40243.641255] ? lock_acquire+0xc8/0x300 [40243.641863] ceph_con_workfn+0x151/0x820 [40243.642493] process_one_work+0x22f/0x630 [40243.643093] ? process_one_work+0x254/0x630 [40243.643770] worker_thread+0x1e2/0x400 [40243.644332] ? __pfx_worker_thread+0x10/0x10 [40243.645020] kthread+0x109/0x140 [40243.645560] ? __pfx_kthread+0x10/0x10 [40243.646125] ret_from_fork+0x3f8/0x480 [40243.646752] ? __pfx_kthread+0x10/0x10 [40243.647316] ? __pfx_kthread+0x10/0x10 [40243.647919] ret_from_fork_asm+0x1a/0x30 [40243.648556] </TASK> [40243.648902] Modules linked in: overlay hctr2 libpolyval chacha libchacha adiantum libnh libpoly1305 essiv intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit kvm_intel kvm irqbypass joydev ghash_clmulni_intel aesni_intel rapl input_leds mac_hid psmouse vga16fb serio_raw vgastate floppy i2c_piix4 pata_acpi bochs qemu_fw_cfg i2c_smbus sch_fq_codel rbd dm_crypt msr parport_pc ppdev lp parport efi_pstore [40243.654766] ---[ end trace 0000000000000000 ]--- Commit d93231a6bc8a ("ceph: prevent a client from exceeding the MDS maximum xattr size") moved the required_blob_size computation to before the __build_xattrs() call, introducing a race. __build_xattrs() releases and reacquires i_ceph_lock during execution. In that window, handle_cap_grant() may update i_xattrs.blob with a newer MDS-provided blob and bump i_xattrs.version. When __bui ---truncated--- | ||||
| CVE-2026-52960 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ceph: put folios not suitable for writeback The batch holds references to the folios (see `filemap_get_folios`, `folio_batch_release`), so we need to `folio_put` the folios we remove. Tested on v6.18. | ||||
| CVE-2026-52959 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: virt: sev-guest: Do not use host-controlled page order in cleanup path When issuing an extended guest request (SVM_VMGEXIT_EXT_GUEST_REQUEST), get_ext_report() allocates a buffer to retrieve a certificate blob from the host, keeping track of its size in report_req->certs_len. However, the host may return SNP_GUEST_VMM_ERR_INVALID_LEN, indicating an invalid buffer size, as well as the expected length of such buffer. get_ext_report() subsequently updates report_req->certs_len with the host-controlled value, and cleans up the buffer by computing a page order from such value. This is incorrect, as the host-provided length may not match the page order of the original allocation, potentially resulting in corruption in the page allocator. Fix this by using alloc_pages_exact() instead, and reusing @npages to compute the size passed to free_pages_exact(). For consistency, also use @npages to compute the size when allocating the pages, even though this last change has no functional effect. | ||||
| CVE-2026-52957 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential null-ptr-deref in decode_choose_args() A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself contains a CRUSH map. When decoding this CRUSH map in crush_decode(), an array of max_buckets CRUSH buckets is decoded, where some indices may not refer to actual buckets and are therefore set to NULL. The received CRUSH map may optionally contain choose_args that get decoded in decode_choose_args(). When decoding a crush_choose_arg_map, a series of choose_args for different buckets is decoded, with the bucket_index being read from the incoming message. It is only checked that the bucket index does not exceed max_buckets, but not that it doesn't point to an index with a NULL bucket. If a (potentially corrupted) message contains a crush_choose_arg_map including such a bucket_index, a null pointer dereference may occur in the subsequent processing when attempting to access the bucket with the given index. This patch fixes the issue by extending the affected check. Now, it is only attempted to access the bucket if it is not NULL. | ||||
| CVE-2026-52956 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in __ceph_x_decrypt() In __ceph_x_decrypt(), a part of the buffer p is interpreted as a ceph_x_encrypt_header, and the magic field of this struct is accessed. This happens without any guarantee that the buffer is large enough to hold this struct. The function parameter ciphertext_len represents the length of the ciphertext to decrypt and is guaranteed to be at most the remaining size of the allocated buffer p. However, this value is not necessarily greater than sizeof(ceph_x_encrypt_header). E.g., a message frame of type FRAME_TAG_AUTH_REPLY_MORE, that is just as long to hold the ciphertext at its end with a ciphertext_len of 8 or less, can trigger an out-of-bounds memory access when accessing hdr->magic. This patch fixes the issue by adding a check to ensure that the decrypted plaintext in the buffer is large enough to represent at least the ceph_x_encrypt_header. | ||||
| CVE-2026-52955 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in crush_decode() A message of type CEPH_MSG_OSD_MAP containing a crush map with at least one bucket has two fields holding the bucket algorithm. If the values in these two fields differ, an out-of-bounds access can occur. This is the case because the first algorithm field (alg) is used to allocate the correct amount of memory for a bucket of this type, while the second algorithm field inside the bucket (b->alg) is used in the subsequent processing. This patch fixes the issue by adding a check that compares alg and b->alg and aborts the processing in case they differ. Furthermore, b->alg is set to 0 in this case, because the destruction of the crush map also uses this field to determine the bucket type, which can again result in an out-of-bounds access when trying to free the memory pointed to by the fields of the bucket. To correctly free the memory allocated for the bucket in such a case, the corresponding call to kfree is moved from the algorithm-specific crush_destroy_bucket functions to the generic crush_destroy_bucket(). | ||||
| CVE-2026-52954 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: libceph: handle rbtree insertion error in decode_choose_args() A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself contains a CRUSH map. The received CRUSH map may optionally contain choose_args that get decoded in decode_choose_args(). In this function, num_choose_arg_maps is read from the message, and a corresponding number of crush_choose_arg_maps gets decoded afterwards. Each crush_choose_arg_map has a choose_args_index, which serves as the key when inserting it into the choose_args rbtree of the decoded crush_map. If a (potentially corrupted) message contains two crush_choose_arg_maps with the same index, the assertion in insert_choose_arg_map() triggers a kernel BUG when trying to insert the second crush_choose_arg_map. This patch fixes the issue by switching to the non-asserting rbtree insertion function and rejecting the message if the insertion fails. [ idryomov: changelog ] | ||||
| CVE-2026-52952 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu: Fix WARN_ON in __iommu_group_set_domain_nofail() due to reset In __iommu_group_set_domain_internal(), concurrent domain attachments are rejected when any device in the group is recovering. This is necessary to fence concurrent attachments to a multi-device group where devices might share the same RID due to PCI DMA alias quirks, but triggers the WARN_ON in __iommu_group_set_domain_nofail(). Other IOMMU_SET_DOMAIN_MUST_SUCCEED callers in detach/teardown paths, such as __iommu_group_set_core_domain and __iommu_release_dma_ownership, should not be rejected, as the domain would be freed anyway in these nofail paths while group->domain is still pointing to it. So pci_dev_reset_iommu_done() could trigger a UAF when re-attaching group->domain. Honor the IOMMU_SET_DOMAIN_MUST_SUCCEED flag, allowing the callers through the group->recovery_cnt fence, so as to update the group->domain pointer. Instead add a gdev->blocked check in the device iteration loop, to prevent any concurrent per-device detachment. | ||||