Export limit exceeded: 369394 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 369394 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (369394 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63998 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: module: call ethnl_ops_complete() on module flash errors When validate() fails we are skipping over ethnl_ops_complete() even tho we already called ethnl_ops_begin(). | ||||
| CVE-2026-63997 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: module: avoid leaking a netdev ref on module flash errors module_flash_fw_schedule() is missing undo for setting the "in_progress" flag and taking the netdev reference. Delay taking these, the device can't disappear while we are holding rtnl_lock. | ||||
| CVE-2026-63991 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: check skb_clone() return value in send_mcast_pkt() The skb_clone() function can return NULL if memory allocation fails. send_mcast_pkt() calls skb_clone() without checking the return value, which can lead to a NULL pointer dereference in send_pkt() when it dereferences skb->data. Add a NULL check after skb_clone() and skip the peer if the clone fails. | ||||
| CVE-2026-63990 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bonding: refuse to enslave CAN devices syzbot reported a kernel paging request crash in can_rx_unregister() inside net/can/af_can.c. The crash occurs because a virtual CAN device (vxcan) is being enslaved to a bonding master. During the enslavement process, the bonding driver mutates and modifies the network device states to fit an Ethernet-like aggregation model. However, CAN devices operate on a completely different Layer 2 architecture, relying on the CAN mid-layer private data structure (can_ml_priv) instead of standard Ethernet structures. Since bonding does not initialize or maintain these CAN structures, subsequent operations on the half-enslaved interface (such as closing associated sockets via isotp_release) lead to a null-pointer dereference when accessing the CAN receiver lists. Bonding CAN interfaces is architecturally invalid as CAN lacks MAC addresses, ARP capabilities, and standard Ethernet link-layer mechanisms. While generic loopback devices are blocked globally in net/core/dev.c, virtual CAN devices bypass this check because they do not carry the IFF_LOOPBACK flag, despite acting as local software-loopbacks. Fix this by explicitly blocking network devices of type ARPHRD_CAN from being enslaved at the very beginning of bond_enslave(). This prevents illegal state mutations, eliminates the resulting KASAN crashes, and avoids potential memory leaks from incomplete socket cleanups. As the CAN support has been added a long time after bonding the Fixes-tag points to the introduction of ARPHRD_CAN that would have needed a specific handling in bonding_main.c. | ||||
| CVE-2026-63986 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: tsinfo: don't pass ERR_PTR to genlmsg_cancel on prepare failure The goto err label leads to: genlmsg_cancel(skb, ehdr); return ret; If ethnl_tsinfo_prepare_dump() failed, it has not started a genlmsg. There's nothing to cancel, and passing an error pointer to genlmsg_cancel() would cause a crash. | ||||
| CVE-2026-63981 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mirred: Fix blockcast recursion bypass leading to stack overflow tcf_mirred_act() checks sched_mirred_nest against MIRRED_NEST_LIMIT (4) to prevent deep recursion. However, when the action uses blockcast (tcfm_blockid != 0), the function returns at the tcf_blockcast() call BEFORE reaching the counter increment. As a result, the recursion counter never advances and the limit check is entirely bypassed. When two devices share a TC egress block with a mirred blockcast rule, a packet egressing on device A is mirrored to device B via blockcast; device B's egress TC re-enters tcf_mirred_act() via blockcast and mirrors back to A, creating an unbounded recursion loop: tcf_mirred_act -> tcf_blockcast -> tcf_mirred_to_dev -> dev_queue_xmit -> sch_handle_egress -> tcf_classify -> tcf_mirred_act -> (repeat) This recursion continues until the kernel stack overflows. The bug is reachable from an unprivileged user via unshare(CLONE_NEWUSER | CLONE_NEWNET): user namespaces grant CAP_NET_ADMIN in the new network namespace, which is sufficient to create dummy devices, attach clsact qdiscs with shared blocks, and install mirred blockcast filters. BUG: TASK stack guard page was hit at ffffc90000b7fff8 Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI CPU: 2 UID: 1000 PID: 169 Comm: poc Not tainted 7.0.0-rc7-next-20260410 RIP: 0010:xas_find+0x17/0x480 Call Trace: xa_find+0x17b/0x1d0 tcf_mirred_act+0x640/0x1060 tcf_action_exec+0x400/0x530 basic_classify+0x128/0x1d0 tcf_classify+0xd83/0x1150 tc_run+0x328/0x620 __dev_queue_xmit+0x797/0x3100 tcf_mirred_to_dev+0x7b1/0xf70 tcf_mirred_act+0x68a/0x1060 [repeating ~30+ times until stack overflow] Kernel panic - not syncing: Fatal exception in interrupt Fix this by incrementing sched_mirred_nest before calling tcf_blockcast() and decrementing it on return, mirroring the non-blockcast path. This ensures subsequent recursive entries see the updated counter and are correctly limited by MIRRED_NEST_LIMIT. | ||||
| CVE-2026-63967 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: imu: st_lsm6dsx: fix stack leak in tagged FIFO buffer The tagged FIFO path declares iio_buff on the stack with __aligned(8) but no initializer, but there is a hole in the structure, which will then leak to userspace as ST_LSM6DSX_SAMPLE_SIZE bytes (6) will be copied, but the space between that and the timestamp are not initialized. Commit c14edb4d0bdc ("iio:imu:st_lsm6dsx Fix alignment and data leak issues") moved the untagged FIFO path to a kzalloc'd buffer in hw->scan, but for the tagged path it only added the alignment qualifier and not the initializer :( Fix this by just zero-initializing the structure on the stack. | ||||
| CVE-2026-63966 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: imu: adis16550: fix stack leak in trigger handler adis16550_trigger_handler() declares the scan data array on the stack without initializing it. The memcpy() at the bottom fills only the first 28 bytes (TEMP + 6 channels of GYRO/ACCEL data), and iio_push_to_buffers_with_timestamp() writes the s64 timestamp at the 8-byte-aligned offset 32. Bytes 28-31 remain uninitialized stack data which leaks to userspace on ever trigger. Fix this all by just zero-initializing the structure on the stack. | ||||
| CVE-2026-63963 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: validate VDO count in Discover Identity ACK handlers Properly validate the count passed from a device when calling svdm_consume_identity() or svdm_consume_identity_sop_prime() as the device-controlled value could index off of the static arrays, which could leak data. | ||||
| CVE-2026-63958 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: validate connector number in ucsi_connector_change() The connector number in a UCSI CCI notification is a 7-bit field supplied by the PPM. ucsi_connector_change() uses it to index the ucsi->connector[] array without checking it against the number of connectors the PPM reported at init time, so a buggy or malicious PPM (EC firmware, or an I2C-attached UCSI controller on the ccg / stm32g0 / glink transports) can drive schedule_work() on memory past the end of the array. Reject connector numbers that are zero or exceed cap.num_connectors before dereferencing the array. | ||||
| CVE-2026-63957 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: safe_serial: fix memory corruption with small endpoint Make sure that the bulk-out buffer size is at least eight bytes to avoid user-controlled slab corruption in "safe" mode should a malicious device report a smaller size. | ||||
| CVE-2026-63956 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: cypress_m8: fix memory corruption with small endpoint Make sure that the interrupt-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption or NULL-pointer dereference should a malicious device report a smaller size. | ||||
| CVE-2026-63953 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/migrate_device: fix pgtable leak in migrate_vma_insert_huge_pmd_page When migrate_vma_insert_huge_pmd_page() jumps to unlock_abort due to a PMD check failure, the pgtable allocated earlier via pte_alloc_one() is never freed, causing a memory leak. Added free_abort label to release the pgtable in error path. | ||||
| CVE-2026-63948 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn __set_chan_timer() takes a l2cap_chan reference via l2cap_chan_hold() before scheduling the delayed work. The normal path in l2cap_chan_timeout() drops this reference with l2cap_chan_put() at the end, but the early return when chan->conn is NULL skips the put, leaking the reference. Add the missing l2cap_chan_put() before the early return. | ||||
| CVE-2026-63943 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: xpad - fix out-of-bounds access for Share button xpadone_process_packet() receives len directly from urb->actual_length and uses it to index the share-button byte at data[len - 18] or data[len - 26]. Since both len and data[0] are under the device's control, a broken controller can send a GIP_CMD_INPUT packet with actual_length < 18 (e.g. 5 bytes) and reach this code path, causing accesses beyond the actual array. Fix this by calculating the offset and checking bounds against the packet length. | ||||
| CVE-2026-63936 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: mt6359: fix unchecked return value in mt6358_read_imp In mt6358_read_imp(), the variable val_v is passed to regmap_read() but the return value is not checked. If the read fails, val_v remains uninitialized and its random stack content is subsequently reported as a measurement result. Initialize val_v to zero to ensure a predictable value is reported in case of bus failure and to prevent potential stack data leakage. This also satisfies static analyzers that might otherwise flag the variable as used uninitialized. | ||||
| CVE-2026-63933 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: gyro: adis16260: fix division by zero in write_raw Add a validation check for the sampling frequency value before using it as a divisor. A user writing zero to the sampling_frequency sysfs attribute triggers a division by zero in the kernel. | ||||
| CVE-2026-63929 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Fix DMA fence leak in iio_buffer_enqueue_dmabuf() iio_buffer_enqueue_dmabuf() allocates a struct iio_dma_fence (104 bytes, kmalloc-128) via kmalloc_obj()+dma_fence_init(), which sets the initial kref to 1. It then calls dma_resv_add_fence() which takes a second reference (kref=2), and stores a raw pointer in block->fence. On the success path the function returns without calling dma_fence_put() to release the initial reference, so every buffer enqueue permanently leaks one kmalloc-128 allocation. The iio_buffer_cleanup() work item only releases the temporary reference taken during completion signalling by iio_buffer_signal_dmabuf_done(); the initial reference from dma_fence_init() is never released. With four iio_rwdev instances at 240kHz and 512 samples per buffer, this produces ~1875 kmalloc-128 allocations per second matching the observed slab growth exactly. A test with ftrace confirmed that the dma_fence_destroy event was never triggered. Fix by calling dma_fence_put() after dma_resv_add_fence(), transferring ownership of the fence to the DMA reservation object. The DMA fence then gets properly discarded after being signalled. | ||||
| CVE-2026-63928 | 1 Linux | 1 Linux Kernel | 2026-07-19 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: omninet: fix memory corruption with small endpoint Make sure that the bulk-out buffers are at least as large as the hardcoded transfer size to avoid user-controlled slab corruption should a malicious device report a smaller endpoint max packet size than expected. | ||||
| CVE-2026-63908 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem When a configuration file provides an object size that is larger than the driver's known mxt_obj_size(object), the driver intends to discard the extra bytes. The loop iterates using for (i = 0; i < size; i++). Inside the loop, the condition to skip processing extra bytes is: if (i > mxt_obj_size(object)) continue; Since i is a 0-based index, the valid indices for the object are 0 through mxt_obj_size(object) - 1. When i == mxt_obj_size(object), the condition evaluates to false, and the code processes the byte instead of discarding it. This causes the code to calculate byte_offset = reg + i - cfg->start_ofs and writes the byte there, overwriting exactly one byte of the adjacent instance or object. Update the boundary check to skip extra bytes correctly by using >=. | ||||