Export limit exceeded: 370446 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 20811 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20811 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43428 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: core: Limit the length of unkillable synchronous timeouts The usb_control_msg(), usb_bulk_msg(), and usb_interrupt_msg() APIs in usbcore allow unlimited timeout durations. And since they use uninterruptible waits, this leaves open the possibility of hanging a task for an indefinitely long time, with no way to kill it short of unplugging the target device. To prevent this sort of problem, enforce a maximum limit on the length of these unkillable timeouts. The limit chosen here, somewhat arbitrarily, is 60 seconds. On many systems (although not all) this is short enough to avoid triggering the kernel's hung-task detector. In addition, clear up the ambiguity of negative timeout values by treating them the same as 0, i.e., using the maximum allowed timeout. | ||||
| CVE-2026-43471 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix possible NULL pointer dereference in ufshcd_add_command_trace() The kernel log indicates a crash in ufshcd_add_command_trace, due to a NULL pointer dereference when accessing hwq->id. This can happen if ufshcd_mcq_req_to_hwq() returns NULL. This patch adds a NULL check for hwq before accessing its id field to prevent a kernel crash. Kernel log excerpt: [<ffffffd5d192dc4c>] notify_die+0x4c/0x8c [<ffffffd5d1814e58>] __die+0x60/0xb0 [<ffffffd5d1814d64>] die+0x4c/0xe0 [<ffffffd5d181575c>] die_kernel_fault+0x74/0x88 [<ffffffd5d1864db4>] __do_kernel_fault+0x314/0x318 [<ffffffd5d2a3cdf8>] do_page_fault+0xa4/0x5f8 [<ffffffd5d2a3cd34>] do_translation_fault+0x34/0x54 [<ffffffd5d1864524>] do_mem_abort+0x50/0xa8 [<ffffffd5d2a297dc>] el1_abort+0x3c/0x64 [<ffffffd5d2a29718>] el1h_64_sync_handler+0x44/0xcc [<ffffffd5d181133c>] el1h_64_sync+0x80/0x88 [<ffffffd5d255c1dc>] ufshcd_add_command_trace+0x23c/0x320 [<ffffffd5d255bad8>] ufshcd_compl_one_cqe+0xa4/0x404 [<ffffffd5d2572968>] ufshcd_mcq_poll_cqe_lock+0xac/0x104 [<ffffffd5d11c7460>] ufs_mtk_mcq_intr+0x54/0x74 [ufs_mediatek_mod] [<ffffffd5d19ab92c>] __handle_irq_event_percpu+0xc8/0x348 [<ffffffd5d19abca8>] handle_irq_event+0x3c/0xa8 [<ffffffd5d19b1f0c>] handle_fasteoi_irq+0xf8/0x294 [<ffffffd5d19aa778>] generic_handle_domain_irq+0x54/0x80 [<ffffffd5d18102bc>] gic_handle_irq+0x1d4/0x330 [<ffffffd5d1838210>] call_on_irq_stack+0x44/0x68 [<ffffffd5d183af30>] do_interrupt_handler+0x78/0xd8 [<ffffffd5d2a29c00>] el1_interrupt+0x48/0xa8 [<ffffffd5d2a29ba8>] el1h_64_irq_handler+0x14/0x24 [<ffffffd5d18113c4>] el1h_64_irq+0x80/0x88 [<ffffffd5d2527fb4>] arch_local_irq_enable+0x4/0x1c [<ffffffd5d25282e4>] cpuidle_enter+0x34/0x54 [<ffffffd5d195a678>] do_idle+0x1dc/0x2f8 [<ffffffd5d195a7c4>] cpu_startup_entry+0x30/0x3c [<ffffffd5d18155c4>] secondary_start_kernel+0x134/0x1ac [<ffffffd5d18640bc>] __secondary_switched+0xc4/0xcc | ||||
| CVE-2026-43429 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: usbtmc: Use usb_bulk_msg_killable() with user-specified timeouts The usbtmc driver accepts timeout values specified by the user in an ioctl command, and uses these timeouts for some usb_bulk_msg() calls. Since the user can specify arbitrarily long timeouts and usb_bulk_msg() uses unkillable waits, call usb_bulk_msg_killable() instead to avoid the possibility of the user hanging a kernel thread indefinitely. | ||||
| CVE-2026-43430 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: yurex: fix race in probe The bbu member of the descriptor must be set to the value standing for uninitialized values before the URB whose completion handler sets bbu is submitted. Otherwise there is a window during which probing can overwrite already retrieved data. | ||||
| CVE-2026-43431 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xhci: Fix NULL pointer dereference when reading portli debugfs files Michal reported and debgged a NULL pointer dereference bug in the recently added portli debugfs files Oops is caused when there are more port registers counted in xhci->max_ports than ports reported by Supported Protocol capabilities. This is possible if max_ports is more than maximum port number, or if there are gaps between ports of different speeds the 'Supported Protocol' capabilities. In such cases port->rhub will be NULL so we can't reach xhci behind it. Add an explicit NULL check for this case, and print portli in hex without dereferencing port->rhub. | ||||
| CVE-2026-43432 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix memory leak in xhci_disable_slot() xhci_alloc_command() allocates a command structure and, when the second argument is true, also allocates a completion structure. Currently, the error handling path in xhci_disable_slot() only frees the command structure using kfree(), causing the completion structure to leak. Use xhci_free_command() instead of kfree(). xhci_free_command() correctly frees both the command structure and the associated completion structure. Since the command structure is allocated with zero-initialization, command->in_ctx is NULL and will not be erroneously freed by xhci_free_command(). This bug was found using an experimental static analysis tool we are developing. The tool is based on the LLVM framework and is specifically designed to detect memory management issues. It is currently under active development and not yet publicly available, but we plan to open-source it after our research is published. The bug was originally detected on v6.13-rc1 using our static analysis tool, and we have verified that the issue persists in the latest mainline kernel. We performed build testing on x86_64 with allyesconfig using GCC=11.4.0. Since triggering these error paths in xhci_disable_slot() requires specific hardware conditions or abnormal state, we were unable to construct a test case to reliably trigger these specific error paths at runtime. | ||||
| CVE-2026-31421 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_fw: fix NULL pointer dereference on shared blocks The old-method path in fw_classify() calls tcf_block_q() and dereferences q->handle. Shared blocks leave block->q NULL, causing a NULL deref when an empty cls_fw filter is attached to a shared block and a packet with a nonzero major skb mark is classified. Reject the configuration in fw_change() when the old method (no TCA_OPTIONS) is used on a shared block, since fw_classify()'s old-method path needs block->q which is NULL for shared blocks. The fixed null-ptr-deref calling stack: KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] RIP: 0010:fw_classify (net/sched/cls_fw.c:81) Call Trace: tcf_classify (./include/net/tc_wrapper.h:197 net/sched/cls_api.c:1764 net/sched/cls_api.c:1860) tc_run (net/core/dev.c:4401) __dev_queue_xmit (net/core/dev.c:4535 net/core/dev.c:4790) | ||||
| CVE-2026-31422 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flow: fix NULL pointer dereference on shared blocks flow_change() calls tcf_block_q() and dereferences q->handle to derive a default baseclass. Shared blocks leave block->q NULL, causing a NULL deref when a flow filter without a fully qualified baseclass is created on a shared block. Check tcf_block_shared() before accessing block->q and return -EINVAL for shared blocks. This avoids the null-deref shown below: ======================================================================= KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] RIP: 0010:flow_change (net/sched/cls_flow.c:508) Call Trace: tc_new_tfilter (net/sched/cls_api.c:2432) rtnetlink_rcv_msg (net/core/rtnetlink.c:6980) [...] ======================================================================= | ||||
| CVE-2026-31423 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_hfsc: fix divide-by-zero in rtsc_min() m2sm() converts a u32 slope to a u64 scaled value. For large inputs (e.g. m1=4000000000), the result can reach 2^32. rtsc_min() stores the difference of two such u64 values in a u32 variable `dsm` and uses it as a divisor. When the difference is exactly 2^32 the truncation yields zero, causing a divide-by-zero oops in the concave-curve intersection path: Oops: divide error: 0000 RIP: 0010:rtsc_min (net/sched/sch_hfsc.c:601) Call Trace: init_ed (net/sched/sch_hfsc.c:629) hfsc_enqueue (net/sched/sch_hfsc.c:1569) [...] Widen `dsm` to u64 and replace do_div() with div64_u64() so the full difference is preserved. | ||||
| CVE-2026-43454 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix for duplicate device in netdev hooks When handling NETDEV_REGISTER notification, duplicate device registration must be avoided since the device may have been added by nft_netdev_hook_alloc() already when creating the hook. | ||||
| CVE-2026-43455 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mctp: route: hold key->lock in mctp_flow_prepare_output() mctp_flow_prepare_output() checks key->dev and may call mctp_dev_set_key(), but it does not hold key->lock while doing so. mctp_dev_set_key() and mctp_dev_release_key() are annotated with __must_hold(&key->lock), so key->dev access is intended to be serialized by key->lock. The mctp_sendmsg() transmit path reaches mctp_flow_prepare_output() via mctp_local_output() -> mctp_dst_output() without holding key->lock, so the check-and-set sequence is racy. Example interleaving: CPU0 CPU1 ---- ---- mctp_flow_prepare_output(key, devA) if (!key->dev) // sees NULL mctp_flow_prepare_output( key, devB) if (!key->dev) // still NULL mctp_dev_set_key(devB, key) mctp_dev_hold(devB) key->dev = devB mctp_dev_set_key(devA, key) mctp_dev_hold(devA) key->dev = devA // overwrites devB Now both devA and devB references were acquired, but only the final key->dev value is tracked for release. One reference can be lost, causing a resource leak as mctp_dev_release_key() would only decrease the reference on one dev. Fix by taking key->lock around the key->dev check and mctp_dev_set_key() call. | ||||
| CVE-2026-31424 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: restrict xt_check_match/xt_check_target extensions for NFPROTO_ARP Weiming Shi says: xt_match and xt_target structs registered with NFPROTO_UNSPEC can be loaded by any protocol family through nft_compat. When such a match/target sets .hooks to restrict which hooks it may run on, the bitmask uses NF_INET_* constants. This is only correct for families whose hook layout matches NF_INET_*: IPv4, IPv6, INET, and bridge all share the same five hooks (PRE_ROUTING ... POST_ROUTING). ARP only has three hooks (IN=0, OUT=1, FORWARD=2) with different semantics. Because NF_ARP_OUT == 1 == NF_INET_LOCAL_IN, the .hooks validation silently passes for the wrong reasons, allowing matches to run on ARP chains where the hook assumptions (e.g. state->in being set on input hooks) do not hold. This leads to NULL pointer dereferences; xt_devgroup is one concrete example: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000044: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227] RIP: 0010:devgroup_mt+0xff/0x350 Call Trace: <TASK> nft_match_eval (net/netfilter/nft_compat.c:407) nft_do_chain (net/netfilter/nf_tables_core.c:285) nft_do_chain_arp (net/netfilter/nft_chain_filter.c:61) nf_hook_slow (net/netfilter/core.c:623) arp_xmit (net/ipv4/arp.c:666) </TASK> Kernel panic - not syncing: Fatal exception in interrupt Fix it by restricting arptables to NFPROTO_ARP extensions only. Note that arptables-legacy only supports: - arpt_CLASSIFY - arpt_mangle - arpt_MARK that provide explicit NFPROTO_ARP match/target declarations. | ||||
| CVE-2026-31425 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rds: ib: reject FRMR registration before IB connection is established rds_ib_get_mr() extracts the rds_ib_connection from conn->c_transport_data and passes it to rds_ib_reg_frmr() for FRWR memory registration. On a fresh outgoing connection, ic is allocated in rds_ib_conn_alloc() with i_cm_id = NULL because the connection worker has not yet called rds_ib_conn_path_connect() to create the rdma_cm_id. When sendmsg() with RDS_CMSG_RDMA_MAP is called on such a connection, the sendmsg path parses the control message before any connection establishment, allowing rds_ib_post_reg_frmr() to dereference ic->i_cm_id->qp and crash the kernel. The existing guard in rds_ib_reg_frmr() only checks for !ic (added in commit 9e630bcb7701), which does not catch this case since ic is allocated early and is always non-NULL once the connection object exists. KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:rds_ib_post_reg_frmr+0x50e/0x920 Call Trace: rds_ib_post_reg_frmr (net/rds/ib_frmr.c:167) rds_ib_map_frmr (net/rds/ib_frmr.c:252) rds_ib_reg_frmr (net/rds/ib_frmr.c:430) rds_ib_get_mr (net/rds/ib_rdma.c:615) __rds_rdma_map (net/rds/rdma.c:295) rds_cmsg_rdma_map (net/rds/rdma.c:860) rds_sendmsg (net/rds/send.c:1363) ____sys_sendmsg do_syscall_64 Add a check in rds_ib_get_mr() that verifies ic, i_cm_id, and qp are all non-NULL before proceeding with FRMR registration, mirroring the guard already present in rds_ib_post_inv(). Return -ENODEV when the connection is not ready, which the existing error handling in rds_cmsg_send() converts to -EAGAIN for userspace retry and triggers rds_conn_connect_if_down() to start the connection worker. | ||||
| CVE-2026-31426 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: EC: clean up handlers on probe failure in acpi_ec_setup() When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardware platforms, it has already started the EC and installed the address space handler with the struct acpi_ec pointer as handler context. However, acpi_ec_setup() propagates the error without any cleanup. The caller acpi_ec_add() then frees the struct acpi_ec for non-boot instances, leaving a dangling handler context in ACPICA. Any subsequent AML evaluation that accesses an EC OpRegion field dispatches into acpi_ec_space_handler() with the freed pointer, causing a use-after-free: BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289) Write of size 8 at addr ffff88800721de38 by task init/1 Call Trace: <TASK> mutex_lock (kernel/locking/mutex.c:289) acpi_ec_space_handler (drivers/acpi/ec.c:1362) acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293) acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246) acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509) acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700) acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327) acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392) </TASK> Allocated by task 1: acpi_ec_alloc (drivers/acpi/ec.c:1424) acpi_ec_add (drivers/acpi/ec.c:1692) Freed by task 1: kfree (mm/slub.c:6876) acpi_ec_add (drivers/acpi/ec.c:1751) The bug triggers on reduced-hardware EC platforms (ec->gpe < 0) when the GPIO IRQ provider defers probing. Once the stale handler exists, any unprivileged sysfs read that causes AML to touch an EC OpRegion (battery, thermal, backlight) exercises the dangling pointer. Fix this by calling ec_remove_handlers() in the error path of acpi_ec_setup() before clearing first_ec. ec_remove_handlers() checks each EC_FLAGS_* bit before acting, so it is safe to call regardless of how far ec_install_handlers() progressed: -ENODEV (handler not installed): only calls acpi_ec_stop() -EPROBE_DEFER (handler installed): removes handler, stops EC | ||||
| CVE-2026-24206 | 2 Linux, Nvidia | 2 Linux Kernel, Triton Inference Server | 2026-05-20 | 7.3 High |
| NVIDIA Triton Inference Server contains a vulnerability where an attacker could cause an authentication bypass. A successful exploit of this vulnerability might lead to escalation of privileges, denial of service, or information disclosure. | ||||
| CVE-2026-31416 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: account for netlink header size This is a followup to an old bug fix: NLMSG_DONE needs to account for the netlink header size, not just the attribute size. This can result in a WARN splat + drop of the netlink message, but other than this there are no ill effects. | ||||
| CVE-2026-24208 | 2 Linux, Nvidia | 2 Linux Kernel, Triton Inference Server | 2026-05-20 | 5.3 Medium |
| NVIDIA Triton Inference Server contains a vulnerability where an attacker could cause a path traversal issue. A successful exploit of this vulnerability might lead to denial of service. | ||||
| CVE-2026-24209 | 2 Linux, Nvidia | 2 Linux Kernel, Triton Inference Server | 2026-05-20 | 7.5 High |
| NVIDIA Triton Inference Server contains a vulnerability where an attacker could cause a path traversal issue. A successful exploit of this vulnerability might lead to denial of service. | ||||
| CVE-2026-24210 | 2 Linux, Nvidia | 2 Linux Kernel, Triton Inference Server | 2026-05-20 | 7.5 High |
| NVIDIA Triton Inference Server contains a vulnerability where an attacker could cause an integer overflow. A successful exploit of this vulnerability might lead to denial of service. | ||||
| CVE-2026-31414 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: use expect->helper Use expect->helper in ctnetlink and /proc to dump the helper name. Using nfct_help() without holding a reference to the master conntrack is unsafe. Use exp->master->helper in ctnetlink path if userspace does not provide an explicit helper when creating an expectation to retain the existing behaviour. The ctnetlink expectation path holds the reference on the master conntrack and nf_conntrack_expect lock and the nfnetlink glue path refers to the master ct that is attached to the skb. | ||||