Export limit exceeded: 376416 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (376416 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64113 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ixgbevf: fix use-after-free in VEPA multicast source pruning ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's own address (VEPA multicast workaround) by freeing the skb and continuing to the next descriptor: dev_kfree_skb_irq(skb); continue; The skb pointer is declared outside the while loop and persists across iterations. Because the continue skips the "skb = NULL" reset at the bottom of the loop, the next iteration enters the "else if (skb)" path and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context. The sibling driver iavf already handles this correctly by nulling the pointer before continuing. Apply the same pattern here. I do not have ixgbevf hardware; the bug was found by static analysis (scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool corroboration with the highest score in the scan). The UAF was confirmed under KASAN by loading a test module that reproduces the exact code pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags): BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000 Read of size 8 at addr 000000006163ae78 by task insmod/30 freed 208-byte region [000000006163adc0, 000000006163ae90) QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF driver does not include the VEPA source pruning path, so a full end-to-end reproduction with emulated hardware was not possible. | ||||
| CVE-2026-64114 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: raw: reject IP_HDRINCL packets with ihl < 5 raw_send_hdrinc() validates that the caller-supplied IPv4 header fits within the message length: iphlen = iph->ihl * 4; err = -EINVAL; if (iphlen > length) goto error_free; if (iphlen >= sizeof(*iph)) { /* fix up saddr, tot_len, id, csum, transport_header */ } It does not, however, reject ihl < 5. For such a packet the "if (iphlen >= sizeof(*iph))" branch is skipped, leaving the crafted iphdr untouched, but the packet is still handed to __ip_local_out() and onward. Downstream consumers that read iph->ihl assume a sane value: net/ipv4/ah4.c:ah_output() in particular subtracts sizeof(struct iphdr) from top_iph->ihl * 4 and passes the (signed-int-negative, then cast to size_t) result to memcpy(), producing an OOB access of length close to SIZE_MAX and a host kernel panic. An IPv4 header with ihl < 5 is malformed by definition (RFC 791: "Internet Header Length is the length of the internet header in 32 bit words ... Note that the minimum value for a correct header is 5."). The kernel should not be willing to inject such a packet into its own output path. Reject "iphlen < sizeof(*iph)" alongside the existing "iphlen > length" check. This matches the principle that locally constructed packets that re-enter the IP stack must pass the same basic sanity tests that a foreign packet would be subjected to. Once this lands, the "if (iphlen >= sizeof(*iph))" wrapper around the fixup branch becomes redundant; left in place to keep the patch minimal and backport-friendly. A follow-up can unwrap it. Note that commit 86f4c90a1c5c ("ipv4, ipv6: ensure raw socket message is big enough to hold an IP header") ensures the message buffer is large enough to hold an iphdr, but does not constrain the self-reported iph->ihl. Reachability: the malformed packet source is any caller with CAP_NET_RAW, including an unprivileged process in a user+net namespace on a kernel with CONFIG_USER_NS=y. The reproduced AH crash also requires a matching xfrm AH policy on the outgoing route; a container granted CAP_NET_ADMIN can install that state and policy in its netns. Loopback bypasses xfrm_output, so the trigger uses a real netdev. Reproduced on UML + KASAN: kernel-mode fault at addr 0x0 with memcpy_orig at the crash site. Same shape reproduces inside a rootless Docker container with --cap-add NET_ADMIN on a stock distro kernel. | ||||
| CVE-2026-64115 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: fix UAF when peer resets connection during handshake vmci_transport_recv_connecting_server() returned err = 0 for a peer RST in its default switch arm: err = pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST ? 0 : -EINVAL; That made vmci_transport_recv_listen() skip vsock_remove_pending(), leaving the pending socket on the listener's pending_links with sk_state = TCP_CLOSE while destroy: still dropped the explicit reference taken before schedule_delayed_work(). One second later vsock_pending_work() observed is_pending=true and performed full cleanup: vsock_remove_pending() then the two trailing sock_put(sk) calls -- the first reached refcount 0 and __sk_freed the socket, and the second wrote into the freed object: BUG: KASAN: slab-use-after-free in refcount_warn_saturate Write of size 4 at addr ffff88800b1cac80 by task kworker Workqueue: events vsock_pending_work Treat peer RST like any other unexpected packet type (err = -EINVAL). All destroy: arms now return err < 0, so vmci_transport_recv_listen() removes pending from pending_links synchronously and vsock_pending_work() takes the is_pending=false / !rejected branch, dropping only its own work reference. This also closes the multi-packet race Sashiko reported on v2: pending is removed from the list before any subsequent packet can find it. The pre-existing sk_acceptq_removed() gap on the err < 0 path of vmci_transport_recv_listen() that Sashiko also noted is not introduced or changed by this patch. Tested on lts-6.12.79 with KASAN: 52/100 unpatched -> 0/100 patched. | ||||
| CVE-2026-64116 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: add NULL check for idev in ipv6_hop_ioam() Reported by Sashiko: The function ipv6_hop_ioam() accesses __in6_dev_get(skb->dev)->cnf.ioam6_enabled without validating the returned idev pointer. Because addrconf_ifdown() can concurrently clear dev->ip6_ptr via RCU, __in6_dev_get() can return NULL during interface teardown, which could cause a NULL pointer dereference when processing an IOAM Hop-by-Hop option. Let's add a check and use SKB_DROP_REASON_IPV6DISABLED accordingly. | ||||
| CVE-2026-54231 | 3 Abrt Project, Fedoraproject, Redhat | 3 Abrt, Fedora, Enterprise Linux | 2026-08-12 | 5.5 Medium |
| A content injection vulnerability was found in the ABRT post-create event handler scripts in libreport. The event script queries the systemd journal for log entries matching the crashed process and writes the results to files in the dump directory without sanitizing embedded control characters. A local user can inject arbitrary content into the journal output by embedding newline characters in syslog messages, controlling the content that root writes to dump directory files. | ||||
| CVE-2026-64102 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Reject MPA FPDU length underflow before signed receive math A malicious connected siw peer can send an iWARP FPDU whose MPA length field (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smaller than the fixed DDP/RDMAP header for the announced opcode. Soft-iWARP parses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode] .hdr_len, but never compares mpa_len against that header length. siw_tcp_rx_data() then derives srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd + MPA_HDR_SIZE; where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at this point. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smallest on-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len below hdr_len - MPA_HDR_SIZE underflows to a negative int. The signed value then flows into siw_proc_write()/siw_proc_rresp() as bytes = min(srx->fpdu_part_rem, srx->skb_new); is handed to siw_check_mem() as an int len (whose interval check addr + len > mem->va + mem->len is satisfied for a valid base when len is negative), and reaches siw_rx_data() -> siw_rx_kva() / siw_rx_umem() -> skb_copy_bits() as a signed copy length. The header copy branch in skb_copy_bits() promotes that to size_t, producing a multi-gigabyte read. KASAN under a KUnit harness that drives the real kernel TCP receive path -- a loopback AF_INET socketpair, the malformed FPDU written via kernel_sendmsg, sk_data_ready firing in softirq, tcp_read_sock dispatching to siw_tcp_rx_data -- reports: BUG: KASAN: use-after-free in skb_copy_bits+0x284/0x480 Read of size 4294967295 at addr ffff888... Call Trace: skb_copy_bits siw_rx_kva siw_rx_data siw_check_mem siw_proc_write siw_tcp_rx_data __tcp_read_sock siw_qp_llp_data_ready tcp_data_ready tcp_data_queue Add the missing invariant at the earliest point where the peer header is fully assembled. iwarp_pktinfo[*].hdr_len - MPA_HDR_SIZE is exactly the value the siw transmitter uses as the minimum mpa_len for each opcode (drivers/infiniband/sw/siw/siw_qp.c:33), so this matches the protocol contract. Out-of-range FPDUs terminate the connection with TERM_ERROR_LAYER_LLP / LLP_ETYPE_MPA / LLP_ECODE_FPDU_START -- which is RFC 5044 Section 8 error code 3 ("Marker and ULPDU Length fields do not agree on the start of an FPDU"), the correct framing-error class for this inconsistency. | ||||
| CVE-2026-14258 | 2 Dhcpcd Project, Redhat | 2 Dhcpcd, Enterprise Linux | 2026-08-12 | 6.5 Medium |
| A flaw was found in dhcpcd's IPv6 Neighbor Discovery Router Advertisement processing. A specially crafted IPv6 Router Advertisement containing a zero-length Neighbor Discovery option can bypass validation during packet storage and later be reparsed without adequate validation, causing the parser to enter a non-advancing loop. Successful exploitation may result in excessive CPU consumption, leading to a denial of service. | ||||
| CVE-2026-64103 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: isci: Fix use-after-free in device removal path The ISCI completion tasklet is initialized in isci_host_alloc() (drivers/scsi/isci/init.c:496) and scheduled from both MSI-X and legacy interrupt handlers (drivers/scsi/isci/host.c:223,613). isci_host_deinit() stops the controller and waits for stop completion, but it never kills completion_tasklet before teardown continues. A top-of-function tasklet_kill() is not sufficient here: interrupts are only disabled when isci_host_stop_complete() runs, so until wait_for_stop() returns the IRQ handlers can still requeue the tasklet. The tasklet callback also re-enables interrupts after draining completions, so killing the tasklet before the source is quiesced leaves the same race open. Once wait_for_stop() returns, no further IRQ-driven scheduling can occur. Kill completion_tasklet there so teardown cannot race a queued tasklet running on a dead ihost. On remove or unload, the stale callback can otherwise dereference ihost and touch ihost->smu_registers after the host lifetime ends. A UML + KASAN analogue reproduced the failure class both with no tasklet_kill() and with tasklet_kill() placed before source quiesce, and stayed clean once the kill happened after quiescing the scheduling source. This mirrors commit f6ab594672d4 ("scsi: aic94xx: fix use-after-free in device removal path"), but ISCI needs the kill after wait_for_stop(). | ||||
| CVE-2026-64105 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Free private_irqs when init fails after allocation Companion to commit 250f25367b58 ("KVM: arm64: Tear down vGIC on failed vCPU creation"), which added the missing kvm_vgic_vcpu_destroy() call to the kvm_share_hyp() failure path in kvm_arch_vcpu_create(). The kvm_vgic_vcpu_init() failure path immediately above it has the same shape and still needs the same cleanup. Call kvm_vgic_vcpu_destroy() when kvm_vgic_vcpu_init() fails so private IRQs allocated before a redistributor iodev registration failure are released before the failed vCPU is freed. | ||||
| CVE-2026-64104 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 8.7 High |
| In the Linux kernel, the following vulnerability has been resolved: virt: sev-guest: Explicitly leak pages in unknown state When set_memory_{encrypted,decrypted}() fail, the user cannot know at which point the function failed, meaning that the pages are left in an unknown state from the point of view of the caller. Since the pages may be left in an unencrypted state, they are not suitable for general use, and cannot be returned safely to the buddy allocator. Avoid the issue by never freeing the pages, and then do the proper accounting by calling snp_leak_pages(). | ||||
| CVE-2026-64106 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 9 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-its: Reject restored DTE with out-of-range num_eventid_bits Userspace can restore an ITS Device Table Entry whose Size field encodes more EventID bits than the virtual ITS supports. The live MAPD path rejects that state, but vgic_its_restore_dte() accepts it and stores the out-of-range value in dev->num_eventid_bits. Reject restored DTEs with num_eventid_bits > VITS_TYPER_IDBITS before allocating the device. This mirrors the MAPD check and prevents the restored state from reaching vgic_its_restore_itt(), where the unchecked value can be converted into an oversized scan_its_table() range. | ||||
| CVE-2026-73090 | 1 Chocobozzz | 1 Peertube | 2026-08-12 | 9.3 Critical |
| PeerTube is an ActivityPub-federated video streaming platform. Prior to 8.2.2, processUpdateActivity and processUpdateVideo accept an ActivityPub Update containing a Video object without verifying that byActor.url is authorized for the host in videoObject.id, allowing a malicious federated server to rewrite another server's video metadata, visibility, media file, and HLS URLs. This issue is fixed in version 8.2.2. | ||||
| CVE-2026-71362 | 1 Adobe | 3 Adobe Commerce, Adobe Commerce B2b, Magento Open Source | 2026-08-12 | 9.1 Critical |
| Adobe Commerce is affected by an Incorrect Authorization vulnerability that could result in privilege escalation. An attacker could leverage this vulnerability to gain elevated access to sensitive resources. Exploitation of this issue does not require user interaction. | ||||
| CVE-2026-15803 | 2026-08-12 | N/A | ||
| In Eclipse RDF4J, several XML parser entry points do not fully restrict XML External Entity (XXE) processing when parsing untrusted XML-based RDF data or query results, permitting DOCTYPE declarations, external entity references, and external DTD loading. This is due to an incomplete fix for CVE-2018-1000644: the earlier fix did not cover all parser entry points. The issue is resolved in RDF4J 5.3.2, which rejects or disables DOCTYPE declarations, external entities, and external DTD loading by default. | ||||
| CVE-2025-32087 | 2026-08-12 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused | ||||
| CVE-2025-27245 | 2026-08-12 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused | ||||
| CVE-2025-31943 | 2026-08-12 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused | ||||
| CVE-2025-35977 | 2026-08-12 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused | ||||
| CVE-2025-32737 | 2026-08-12 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused | ||||
| CVE-2025-20020 | 2026-08-12 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused | ||||