Export limit exceeded: 18570 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (18570 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68334 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Add support for Van Gogh SoC The ROG Xbox Ally (non-X) SoC features a similar architecture to the Steam Deck. While the Steam Deck supports S3 (s2idle causes a crash), this support was dropped by the Xbox Ally which only S0ix suspend. Since the handler is missing here, this causes the device to not suspend and the AMD GPU driver to crash while trying to resume afterwards due to a power hang. | ||||
| CVE-2025-40185 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: ice_adapter: release xa entry on adapter allocation failure When ice_adapter_new() fails, the reserved XArray entry created by xa_insert() is not released. This causes subsequent insertions at the same index to return -EBUSY, potentially leading to NULL pointer dereferences. Reorder the operations as suggested by Przemek Kitszel: 1. Check if adapter already exists (xa_load) 2. Reserve the XArray slot (xa_reserve) 3. Allocate the adapter (ice_adapter_new) 4. Store the adapter (xa_store) | ||||
| CVE-2025-68329 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix WARN_ON in tracing_buffers_mmap_close for split VMAs When a VMA is split (e.g., by partial munmap or MAP_FIXED), the kernel calls vm_ops->close on each portion. For trace buffer mappings, this results in ring_buffer_unmap() being called multiple times while ring_buffer_map() was only called once. This causes ring_buffer_unmap() to return -ENODEV on subsequent calls because user_mapped is already 0, triggering a WARN_ON. Trace buffer mappings cannot support partial mappings because the ring buffer structure requires the complete buffer including the meta page. Fix this by adding a may_split callback that returns -EINVAL to prevent VMA splits entirely. | ||||
| CVE-2022-50582 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: regulator: core: Prevent integer underflow By using a ratio of delay to poll_enabled_time that is not integer time_remaining underflows and does not exit the loop as expected. As delay could be derived from DT and poll_enabled_time is defined in the driver this can easily happen. Use a signed iterator to make sure that the loop exits once the remaining time is negative. | ||||
| CVE-2022-50615 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix reference count leak in snr_uncore_mmio_map() pci_get_device() will increase the reference count for the returned pci_dev, so snr_uncore_get_mc_dev() will return a pci_dev with its reference count increased. We need to call pci_dev_put() to decrease the reference count. Let's add the missing pci_dev_put(). | ||||
| CVE-2025-68327 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: Fix synchronous external abort on unbind A synchronous external abort occurs on the Renesas RZ/G3S SoC if unbind is executed after the configuration sequence described above: modprobe usb_f_ecm modprobe libcomposite modprobe configfs cd /sys/kernel/config/usb_gadget mkdir -p g1 cd g1 echo "0x1d6b" > idVendor echo "0x0104" > idProduct mkdir -p strings/0x409 echo "0123456789" > strings/0x409/serialnumber echo "Renesas." > strings/0x409/manufacturer echo "Ethernet Gadget" > strings/0x409/product mkdir -p functions/ecm.usb0 mkdir -p configs/c.1 mkdir -p configs/c.1/strings/0x409 echo "ECM" > configs/c.1/strings/0x409/configuration if [ ! -L configs/c.1/ecm.usb0 ]; then ln -s functions/ecm.usb0 configs/c.1 fi echo 11e20000.usb > UDC echo 11e20000.usb > /sys/bus/platform/drivers/renesas_usbhs/unbind The displayed trace is as follows: Internal error: synchronous external abort: 0000000096000010 [#1] SMP CPU: 0 UID: 0 PID: 188 Comm: sh Tainted: G M 6.17.0-rc7-next-20250922-00010-g41050493b2bd #55 PREEMPT Tainted: [M]=MACHINE_CHECK Hardware name: Renesas SMARC EVK version 2 based on r9a08g045s33 (DT) pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usbhs_sys_function_pullup+0x10/0x40 [renesas_usbhs] lr : usbhsg_update_pullup+0x3c/0x68 [renesas_usbhs] sp : ffff8000838b3920 x29: ffff8000838b3920 x28: ffff00000d585780 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: ffff00000c3e3810 x23: ffff00000d5e5c80 x22: ffff00000d5e5d40 x21: 0000000000000000 x20: 0000000000000000 x19: ffff00000d5e5c80 x18: 0000000000000020 x17: 2e30303230316531 x16: 312d7968703a7968 x15: 3d454d414e5f4344 x14: 000000000000002c x13: 0000000000000000 x12: 0000000000000000 x11: ffff00000f358f38 x10: ffff00000f358db0 x9 : ffff00000b41f418 x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d x5 : 8080808000000000 x4 : 000000004b5ccb9d x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff800083790000 x0 : ffff00000d5e5c80 Call trace: usbhs_sys_function_pullup+0x10/0x40 [renesas_usbhs] (P) usbhsg_pullup+0x4c/0x7c [renesas_usbhs] usb_gadget_disconnect_locked+0x48/0xd4 gadget_unbind_driver+0x44/0x114 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 device_release_driver+0x18/0x24 bus_remove_device+0xcc/0x10c device_del+0x14c/0x404 usb_del_gadget+0x88/0xc0 usb_del_gadget_udc+0x18/0x30 usbhs_mod_gadget_remove+0x24/0x44 [renesas_usbhs] usbhs_mod_remove+0x20/0x30 [renesas_usbhs] usbhs_remove+0x98/0xdc [renesas_usbhs] platform_remove+0x20/0x30 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 device_driver_detach+0x18/0x24 unbind_store+0xb4/0xb8 drv_attr_store+0x24/0x38 sysfs_kf_write+0x7c/0x94 kernfs_fop_write_iter+0x128/0x1b8 vfs_write+0x2ac/0x350 ksys_write+0x68/0xfc __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xf0 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: 7100003f 1a9f07e1 531c6c22 f9400001 (79400021) ---[ end trace 0000000000000000 ]--- note: sh[188] exited with irqs disabled note: sh[188] exited with preempt_count 1 The issue occurs because usbhs_sys_function_pullup(), which accesses the IP registers, is executed after the USBHS clocks have been disabled. The problem is reproducible on the Renesas RZ/G3S SoC starting with the addition of module stop in the clock enable/disable APIs. With module stop functionality enabled, a bus error is expected if a master accesses a module whose clock has been stopped and module stop activated. Disable the IP clocks at the end of remove. | ||||
| CVE-2025-68266 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bfs: Reconstruct file type when loading from disk syzbot is reporting that S_IFMT bits of inode->i_mode can become bogus when the S_IFMT bits of the 32bits "mode" field loaded from disk are corrupted or when the 32bits "attributes" field loaded from disk are corrupted. A documentation says that BFS uses only lower 9 bits of the "mode" field. But I can't find an explicit explanation that the unused upper 23 bits (especially, the S_IFMT bits) are initialized with 0. Therefore, ignore the S_IFMT bits of the "mode" field loaded from disk. Also, verify that the value of the "attributes" field loaded from disk is either BFS_VREG or BFS_VDIR (because BFS supports only regular files and the root directory). | ||||
| CVE-2025-68283 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: replace BUG_ON with bounds check for map->max_osd OSD indexes come from untrusted network packets. Boundary checks are added to validate these against map->max_osd. [ idryomov: drop BUG_ON in ceph_get_primary_affinity(), minor cosmetic edits ] | ||||
| CVE-2025-68326 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Fix stack_depot usage Add missing stack_depot_init() call when CONFIG_DRM_XE_DEBUG_GUC is enabled to fix the following call stack: [] BUG: kernel NULL pointer dereference, address: 0000000000000000 [] Workqueue: drm_sched_run_job_work [gpu_sched] [] RIP: 0010:stack_depot_save_flags+0x172/0x870 [] Call Trace: [] <TASK> [] fast_req_track+0x58/0xb0 [xe] (cherry picked from commit 64fdf496a6929a0a194387d2bb5efaf5da2b542f) | ||||
| CVE-2025-68321 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: page_pool: always add GFP_NOWARN for ATOMIC allocations Driver authors often forget to add GFP_NOWARN for page allocation from the datapath. This is annoying to users as OOMs are a fact of life, and we pretty much expect network Rx to hit page allocation failures during OOM. Make page pool add GFP_NOWARN for ATOMIC allocations by default. | ||||
| CVE-2025-68293 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix NULL pointer deference when splitting folio Commit c010d47f107f ("mm: thp: split huge page to any lower order pages") introduced an early check on the folio's order via mapping->flags before proceeding with the split work. This check introduced a bug: for shmem folios in the swap cache and truncated folios, the mapping pointer can be NULL. Accessing mapping->flags in this state leads directly to a NULL pointer dereference. This commit fixes the issue by moving the check for mapping != NULL before any attempt to access mapping->flags. | ||||
| CVE-2025-68302 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: sxgbe: fix potential NULL dereference in sxgbe_rx() Currently, when skb is null, the driver prints an error and then dereferences skb on the next line. To fix this, let's add a 'break' after the error message to switch to sxgbe_rx_refill(), which is similar to the approach taken by the other drivers in this particular case, e.g. calxeda with xgmac_rx(). Found during a code review. | ||||
| CVE-2025-68303 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: intel: punit_ipc: fix memory corruption This passes the address of the pointer "&punit_ipcdev" when the intent was to pass the pointer itself "punit_ipcdev" (without the ampersand). This means that the: complete(&ipcdev->cmd_complete); in intel_punit_ioc() will write to a wrong memory address corrupting it. | ||||
| CVE-2025-68307 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: gs_usb_xmit_callback(): fix handling of failed transmitted URBs The driver lacks the cleanup of failed transfers of URBs. This reduces the number of available URBs per error by 1. This leads to reduced performance and ultimately to a complete stop of the transmission. If the sending of a bulk URB fails do proper cleanup: - increase netdev stats - mark the echo_sbk as free - free the driver's context and do accounting - wake the send queue | ||||
| CVE-2025-68310 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/pci: Avoid deadlock between PCI error recovery and mlx5 crdump Do not block PCI config accesses through pci_cfg_access_lock() when executing the s390 variant of PCI error recovery: Acquire just device_lock() instead of pci_dev_lock() as powerpc's EEH and generig PCI AER processing do. During error recovery testing a pair of tasks was reported to be hung: mlx5_core 0000:00:00.1: mlx5_health_try_recover:338:(pid 5553): health recovery flow aborted, PCI reads still not working INFO: task kmcheck:72 blocked for more than 122 seconds. Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kmcheck state:D stack:0 pid:72 tgid:72 ppid:2 flags:0x00000000 Call Trace: [<000000065256f030>] __schedule+0x2a0/0x590 [<000000065256f356>] schedule+0x36/0xe0 [<000000065256f572>] schedule_preempt_disabled+0x22/0x30 [<0000000652570a94>] __mutex_lock.constprop.0+0x484/0x8a8 [<000003ff800673a4>] mlx5_unload_one+0x34/0x58 [mlx5_core] [<000003ff8006745c>] mlx5_pci_err_detected+0x94/0x140 [mlx5_core] [<0000000652556c5a>] zpci_event_attempt_error_recovery+0xf2/0x398 [<0000000651b9184a>] __zpci_event_error+0x23a/0x2c0 INFO: task kworker/u1664:6:1514 blocked for more than 122 seconds. Not tainted 5.14.0-570.12.1.bringup7.el9.s390x #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u1664:6 state:D stack:0 pid:1514 tgid:1514 ppid:2 flags:0x00000000 Workqueue: mlx5_health0000:00:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core] Call Trace: [<000000065256f030>] __schedule+0x2a0/0x590 [<000000065256f356>] schedule+0x36/0xe0 [<0000000652172e28>] pci_wait_cfg+0x80/0xe8 [<0000000652172f94>] pci_cfg_access_lock+0x74/0x88 [<000003ff800916b6>] mlx5_vsc_gw_lock+0x36/0x178 [mlx5_core] [<000003ff80098824>] mlx5_crdump_collect+0x34/0x1c8 [mlx5_core] [<000003ff80074b62>] mlx5_fw_fatal_reporter_dump+0x6a/0xe8 [mlx5_core] [<0000000652512242>] devlink_health_do_dump.part.0+0x82/0x168 [<0000000652513212>] devlink_health_report+0x19a/0x230 [<000003ff80075a12>] mlx5_fw_fatal_reporter_err_work+0xba/0x1b0 [mlx5_core] No kernel log of the exact same error with an upstream kernel is available - but the very same deadlock situation can be constructed there, too: - task: kmcheck mlx5_unload_one() tries to acquire devlink lock while the PCI error recovery code has set pdev->block_cfg_access by way of pci_cfg_access_lock() - task: kworker mlx5_crdump_collect() tries to set block_cfg_access through pci_cfg_access_lock() while devlink_health_report() had acquired the devlink lock. A similar deadlock situation can be reproduced by requesting a crdump with > devlink health dump show pci/<BDF> reporter fw_fatal while PCI error recovery is executed on the same <BDF> physical function by mlx5_core's pci_error_handlers. On s390 this can be injected with > zpcictl --reset-fw <BDF> Tests with this patch failed to reproduce that second deadlock situation, the devlink command is rejected with "kernel answers: Permission denied" - and we get a kernel log message of: mlx5_core 1ed0:00:00.1: mlx5_crdump_collect:50:(pid 254382): crdump: failed to lock vsc gw err -5 because the config read of VSC_SEMAPHORE is rejected by the underlying hardware. Two prior attempts to address this issue have been discussed and ultimately rejected [see link], with the primary argument that s390's implementation of PCI error recovery is imposing restrictions that neither powerpc's EEH nor PCI AER handling need. Tests show that PCI error recovery on s390 is running to completion even without blocking access to PCI config space. | ||||
| CVE-2025-68311 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: ip22zilog: Use platform device for probing After commit 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM") serial drivers need to provide a device in struct uart_port.dev otherwise an oops happens. To fix this issue for ip22zilog driver switch driver to a platform driver and setup the serial device in sgi-ip22 code. | ||||
| CVE-2025-68312 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usbnet: Prevents free active kevent The root cause of this issue are: 1. When probing the usbnet device, executing usbnet_link_change(dev, 0, 0); put the kevent work in global workqueue. However, the kevent has not yet been scheduled when the usbnet device is unregistered. Therefore, executing free_netdev() results in the "free active object (kevent)" error reported here. 2. Another factor is that when calling usbnet_disconnect()->unregister_netdev(), if the usbnet device is up, ndo_stop() is executed to cancel the kevent. However, because the device is not up, ndo_stop() is not executed. The solution to this problem is to cancel the kevent before executing free_netdev(). | ||||
| CVE-2025-68316 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix invalid probe error return value After DME Link Startup, the error return value is set to the MIPI UniPro GenericErrorCode which can be 0 (SUCCESS) or 1 (FAILURE). Upon failure during driver probe, the error code 1 is propagated back to the driver probe function which must return a negative value to indicate an error, but 1 is not negative, so the probe is considered to be successful even though it failed. Subsequently, removing the driver results in an oops because it is not in a valid state. This happens because none of the callers of ufshcd_init() expect a non-negative error code. Fix the return value and documentation to match actual usage. | ||||
| CVE-2025-68226 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix incomplete backport in cfids_invalidation_worker() The previous commit bdb596ceb4b7 ("smb: client: fix potential UAF in smb2_close_cached_fid()") was an incomplete backport and missed one kref_put() call in cfids_invalidation_worker() that should have been converted to close_cached_dir(). | ||||
| CVE-2025-68227 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: Fix proto fallback detection with BPF The sockmap feature allows bpf syscall from userspace, or based on bpf sockops, replacing the sk_prot of sockets during protocol stack processing with sockmap's custom read/write interfaces. ''' tcp_rcv_state_process() syn_recv_sock()/subflow_syn_recv_sock() tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB) bpf_skops_established <== sockops bpf_sock_map_update(sk) <== call bpf helper tcp_bpf_update_proto() <== update sk_prot ''' When the server has MPTCP enabled but the client sends a TCP SYN without MPTCP, subflow_syn_recv_sock() performs a fallback on the subflow, replacing the subflow sk's sk_prot with the native sk_prot. ''' subflow_syn_recv_sock() subflow_ulp_fallback() subflow_drop_ctx() mptcp_subflow_ops_undo_override() ''' Then, this subflow can be normally used by sockmap, which replaces the native sk_prot with sockmap's custom sk_prot. The issue occurs when the user executes accept::mptcp_stream_accept::mptcp_fallback_tcp_ops(). Here, it uses sk->sk_prot to compare with the native sk_prot, but this is incorrect when sockmap is used, as we may incorrectly set sk->sk_socket->ops. This fix uses the more generic sk_family for the comparison instead. Additionally, this also prevents a WARNING from occurring: result from ./scripts/decode_stacktrace.sh: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 337 at net/mptcp/protocol.c:68 mptcp_stream_accept \ (net/mptcp/protocol.c:4005) Modules linked in: ... PKRU: 55555554 Call Trace: <TASK> do_accept (net/socket.c:1989) __sys_accept4 (net/socket.c:2028 net/socket.c:2057) __x64_sys_accept (net/socket.c:2067) x64_sys_call (arch/x86/entry/syscall_64.c:41) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f87ac92b83d ---[ end trace 0000000000000000 ]--- | ||||