Export limit exceeded: 378648 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 14990 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (14990 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74309 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: vdpa/octeon_ep: fix IRQ-to-ring mapping in interrupt handler Look up the IRQ index in oct_hw->irqs instead of assuming irq - irqs[0]. This supports non-contiguous IRQ numbers and avoids incorrect ring indexing when irqs[0] is not the base. | ||||
| CVE-2026-74443 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: bound DMA command body size against suffix pointer vmw_cmd_dma() locates the DMA suffix at (unsigned long) &cmd->body + header->size - sizeof(*suffix) without checking that header->size is large enough to contain both cmd->body and the suffix. An undersized header makes the suffix pointer underflow back into the previous command in the bounce buffer. The verifier later writes suffix->maximumOffset, clobbering verified fields of an already-relocated earlier command -- a TOCTOU on the device-visible command stream that lets one command rewrite another's GMR id, surface id, or other authenticated fields. Reject the command if the body is too small for the suffix to fit. | ||||
| CVE-2026-70354 | 1 Microsoft | 20 .net, .net Framework, Microsoft Visual Studio 2022 and 17 more | 2026-08-17 | 7.8 High |
| Out-of-bounds write in .NET allows an unauthorized attacker to execute code locally. | ||||
| CVE-2026-53059 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm log: fix out-of-bounds write due to region_count overflow The local variable region_count in create_log_context() is declared as unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit). When a device-mapper target has a sufficiently large ti->len with a small region_size, the division result can exceed UINT_MAX. The truncated value is then used to calculate bitset_size, causing clean_bits, sync_bits, and recovering_bits to be allocated far smaller than needed for the actual number of regions. Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use region indices derived from the full untruncated region space, causing out-of-bounds writes to kernel heap memory allocated by vmalloc. This can be reproduced by creating a mirror target whose region_count overflows 32 bits: dmsetup create bigzero --table '0 8589934594 zero' dmsetup create mymirror --table '0 8589934594 mirror \ core 2 2 nosync 2 /dev/mapper/bigzero 0 \ /dev/mapper/bigzero 0' The status output confirms the truncation (sync_count=1 instead of 4294967297, because 0x100000001 was truncated to 1): $ dmsetup status mymirror 0 8589934594 mirror 2 254:1 254:1 1/4294967297 ... This leads to a kernel crash in core_in_sync: BUG: scheduling while atomic: (udev-worker)/9150/0x00000000 RIP: 0010:core_in_sync+0x14/0x30 [dm_log] CR2: 0000000000000008 Fixing recursive fault but reboot is needed! Fix by widening the local region_count to sector_t and adding an explicit overflow check before the value is assigned to lc->region_count. | ||||
| CVE-2026-13196 | 1 Kunbus | 1 Picontrol | 2026-08-17 | N/A |
| Nozomi Networks Labs identified a CWE-787: Out-of-bounds Write vulnerability in the process-image management functionality of KUNBUS piControl in version 2.6.2 that allows a local authenticated attacker with device configuration access to write attacker-controlled data outside the bounds of the process-image buffer and corrupt adjacent kernel memory, resulting in kernel memory corruption and denial of service, by supplying crafted device configuration data and crafted input through the piControl character device. | ||||
| CVE-2026-73193 | 1 Perl5-dbi | 1 Dbi | 2026-08-17 | N/A |
| DBI versions before 1.652 for Perl allow a heap out-of-bounds write on 32-bit perl via an integer wraparound in the output buffer size computed by preparse. preparse reserves its output buffer with `newSV(strlen(statement) * 7 + 16)`, budgeting seven output bytes per input byte for the longest ':p99999' expansion. The product is computed in STRLEN, which is 32 bits wide on a 32-bit perl build, so a statement of 613,566,757 bytes multiplies to 4,294,967,299, wraps modulo 2^32 to 3, and reserves 19 bytes. The parser then copies the statement out through a raw pointer with no capacity check, writing the whole 585 MB input past the end of the allocation. The 99,999 placeholder limit does not bound this path, which is reached by ordinary non-placeholder content. Any caller that passes an untrusted statement of that length to preparse on a 32-bit perl gets a heap out-of-bounds write of attacker controlled bytes. Builds with a 64-bit STRLEN are not affected, since the wrap there needs a statement of about 2.3 exabytes. | ||||
| CVE-2026-73194 | 1 Perl5-dbi | 1 Dbi | 2026-08-17 | N/A |
| DBI versions before 1.652 for Perl allow a heap out-of-bounds write via an unvalidated numeric placeholder that sets the binder counter in preparse. preparse reserves seven output bytes per input byte, the width of the longest ':p99999' expansion. The ':N' branch parses the number with `atoi(src)` and assigns it to the binder counter with no range check, so a statement containing ':2147483648' leaves the counter negative (-2147483648 with glibc, where atoi wraps). Each following '?' then expands through `sprintf(start, ":p%d", idx++)` to ':p-2147483648', 14 bytes with the terminating NUL where the buffer budgets 7. The placeholder limit added in 1.650 tests the counter against 99,999, which a negative counter passes. Any caller that preparses an untrusted statement into ':pN' style placeholders gets a heap out-of-bounds write that grows with the number of '?' marks following the poisoned placeholder. The '?' and '%s' return styles compare the parsed number against the expected sequence and error out, and are unaffected. | ||||
| CVE-2026-72211 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: grow index root value before reparent header update ntfs_ir_reparent() moves the resident index root entries into an index block and leaves a small root stub containing the child VCN. That root stub can be larger than the existing resident value. For example, an empty root with value_length 48 has an index area of 32 bytes, while the large-index root stub needs index_length and allocated_size of 40 bytes. The current code publishes the larger index.index_length and index.allocated_size before resizing the resident value. If the resize returns -ENOSPC, the recovery path can call ntfs_inode_add_attrlist(), which looks attributes up again while the root header says allocated_size 40 but the resident value still only provides 32 bytes of index area. Lookup-time $INDEX_ROOT validation then correctly rejects that transient layout as corrupt. This reproduces as a generic/013 failure under qemu. In the failing run, the transient root had value_len=48, index_size=32, index_length=40, and allocated_size=40, and ntfsprogs-plus ntfsck reported "Corrupt index root in MFT record 1177". When the root stub grows, resize the resident value before publishing the larger root header. If the resize fails, the old root remains valid for recovery lookups. Keep the existing header-before-resize ordering for shrink or same-size cases so the resident value never temporarily exposes an allocated_size beyond its bounds. | ||||
| CVE-2026-19387 | 1 Redhat | 1 Enterprise Linux | 2026-08-17 | 7.6 High |
| A heap out-of-bounds write vulnerability was found in the GStreamer gst-plugins-bad adpcmdec element when decoding IMA/DVI ADPCM audio. Insufficient validation of the per-block sample count for multi-channel streams allows a crafted WAV file to cause writes beyond the allocated output buffer. This can lead to application crash, denial of service, memory corruption, or potentially arbitrary code execution when untrusted media is processed. | ||||
| CVE-2026-72046 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: gve: fix header buffer corruption with header-split and HW-GRO The DQO RX datapath programs a per-buffer-queue-descriptor header_buf_addr at post time and reads the split header back at completion time. Both the post and the read currently index the header buffer by queue position rather than by the buffer's identity: - post (gve_rx_post_buffers_dqo): header_buf_addr is computed from bufq->tail - read (gve_rx_dqo): the header is read from desc_idx (the completion queue head index) This relies on the buffer-queue index and the completion-queue index being equal for the start of every packet, i.e. on the device consuming posted buffers and returning completions in the exact same order. That assumption does not hold once HW-GRO is enabled with multiple flows: coalesced segments are accepted and completed in an order that may differ from the order buffers were posted, and segments from different flows may interleave. That results in two problems: 1. Wrong header slot on read. Because the read offset is derived from the completion index (desc_idx) while the device wrote the header to the address programmed for the buffer's buf_id, the driver can copy a header belonging to a different packet. This shows up as throughput drop (about 30% drop and large numbers of TCP retransmissions) with header-split and HW-GRO both enabled and many streams. 2. Header buffer reused while still owned by the device. The driver advances bufq->head by one per completion and re-posts buffers based on that. Arrival of N RX completions only guarantees that at least N RX buffer descriptors have been read by the device. It does not guarantee that the device has relinquished the ownership of all the buffers corresponding to those N descriptors. With out-of-order completions (e.g. the completion for a packet copied into buffer N arrives before the completion for a packet copied into buffer N-1), the driver can re-post and overwrite a header buffer that the device is still going to write into, corrupting the header of a packet whose completion has not yet been processed. Fix both issues by indexing the header buffer by buf_id on both the post and read paths. Reading from buf_id's slot is therefore always correct regardless of completion ordering (fixes problem 1). Indexing by buf_id also ties each header slot to the lifetime of its buffer state. A buffer state is only returned to the free/recycle lists when its own completion (buf_id) is processed, so its header slot can only be re-posted after the device is done with it. This makes header slot reuse safe under out-of-order completions (fixes problem 2). Allocate (gve_rx_alloc_hdr_bufs) and free (gve_rx_free_hdr_bufs) the header buffers based on num_buf_states to match the buf_id indexing. | ||||
| CVE-2026-72025 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/monwriter: Reject buffer reuse with different data length When data buffers are reused, e.g. for interval sample records, the first record determines the data length, and the size of the buffer for user copy. Current monwriter code does not check if the data length was changed for subsequent records, which also would never happen for valid user programs. However, a malicious user could change the data length, resulting in out of bounds user copy to the kernel buffer, and memory corruption. By default, the monwriter misc device is created with root-only permissions, so practical impact is typically low. Fix this by checking for changed data length and rejecting such records. | ||||
| CVE-2026-74404 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix snp_filter_reserved_mem_regions() off-by-one Sashiko notes: > regarding the bounds check in snp_filter_reserved_mem_regions() > called via walk_iomem_res_desc(): does the check > if ((range_list->num_elements * 16 + 8) > PAGE_SIZE) > allow an off-by-one heap buffer overflow? > > If range_list->num_elements is 255, 255 * 16 + 8 = 4088, which is <= 4096. > Writing range->base (8 bytes) fills 4088-4095, but writing range->page_count > (4 bytes) would write to 4096-4099, overflowing the kzalloc-allocated > PAGE_SIZE buffer. Fix this by accounting for the entry about to be written to, in addition to the entries that are already allocated. | ||||
| CVE-2026-72343 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix HV VHCA stats zero-sized buffer allocation mlx5e_hv_vhca_stats_create() is called from mlx5e_nic_enable(), before mlx5e_open(). At that point priv->stats_nch is still zero, because it is only ever incremented in mlx5e_channel_stats_alloc(), which is reached only from mlx5e_open_channel(). mlx5e_hv_vhca_stats_buf_size() therefore returns 0, and kvzalloc(0, GFP_KERNEL) returns ZERO_SIZE_PTR ((void *)16) rather than NULL. The "if (!buf)" guard does not catch this, and mlx5e_hv_vhca_stats_create() completes "successfully" with priv->stats_agent.buf set to ZERO_SIZE_PTR. Once channels are opened (priv->stats_nch > 0) and the hypervisor enables stats reporting, mlx5e_hv_vhca_stats_work() recomputes buf_len using the new non-zero stats_nch and calls memset(buf, 0, buf_len) on ZERO_SIZE_PTR, faulting at address 0x10. Allocate the buffer based on priv->max_nch, which is set in mlx5e_priv_init() and is the upper bound on stats_nch: - Add a separate helper mlx5e_hv_vhca_stats_buf_max_size() that returns sizeof(per_ring_stats) * max(max_nch, stats_nch), and use it for the kvzalloc() in mlx5e_hv_vhca_stats_create(). - Keep mlx5e_hv_vhca_stats_buf_size() (which returns based on stats_nch) for the worker's active payload size, so the wire format (block->rings = stats_nch) and the amount of data filled by mlx5e_hv_vhca_fill_stats() are unchanged. The max(max_nch, stats_nch) guard handles the rare case where mlx5e_attach_netdev() recomputes max_nch downward across a detach/resume cycle while priv->stats_nch persists (mlx5e_detach_netdev does not call mlx5e_priv_cleanup, so stats_nch is only reset when the netdev is destroyed). Without the guard, the worker could compute buf_len from stats_nch and overrun the smaller buffer allocated based on the reduced max_nch. Allocating a non-zero buffer also makes the kvzalloc() failure path in mlx5e_hv_vhca_stats_create() reachable for the first time: it returns early without (re)creating the agent. Clear priv->stats_agent.{agent,buf} in mlx5e_hv_vhca_stats_destroy() after freeing them, so that if a later create() bails out on this path, a subsequent teardown does not double-free the stale agent/buffer left from a previous enable/disable cycle. This mirrors the existing mlx5e pattern of preallocating arrays of size max_nch (e.g. priv->channel_stats) and lazily populating entries up to stats_nch on demand. | ||||
| CVE-2026-72278 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Re-translate VNCR before injecting abort KVM faults in the VNCR page with FOLL_WRITE whenever the guest aborts for a write, similar to how a regular stage-2 mapping is handled. It is entirely possible that the guest reads from the VNCR before writing to it, in which case the PFN could only be read-only. Invalidate the VNCR TLB and re-fetch the translation upon taking a VNCR abort, allowing the host mapping to be faulted in for write the second time around. Interestingly enough, this also satisfies the ordering requirements of FEAT_ETS2/3 between descriptor updates and MMU faults. | ||||
| CVE-2026-68476 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: reload ip header after head reallocation __ip_vs_get_out_rt() calls skb_ensure_writable() which may reallocate skb->head. | ||||
| CVE-2026-68462 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject negative const offsets for buffer pointers The verifier rejects variable offsets for PTR_TO_TP_BUFFER and PTR_TO_BUF accesses, but it currently accepts a constant negative offset produced by pointer arithmetic. Commit 022ac0750883 ("bpf: use reg->var_off instead of reg->off for pointers") moved constant pointer offsets from reg->off to reg->var_off. However, __check_buffer_access() continued to check only the instruction offset. An access with reg->var_off equal to -8 and an instruction offset of zero therefore passes verification. For writable raw tracepoints, the access end is also calculated from the unsigned reg->var_off.value. An eight-byte access starting at -8 wraps the calculated end to zero, allowing the program to load and attach without increasing max_tp_access. After ensuring that reg->var_off is constant, calculate the effective access start using signed arithmetic and reject it when it is negative. Use the validated start to calculate the access end for both PTR_TO_TP_BUFFER and PTR_TO_BUF. | ||||
| CVE-2026-19970 | 1 Assimp | 1 Assimp | 2026-08-17 | 6.3 Medium |
| A vulnerability was detected in Open Asset Import Library Assimp 17c12da. This affects the function Assimp::MDLImporter::AddBonesToNodeGraph_3DGS_MDL7 of the file code/AssetLib/MDL/MDLLoader.cpp of the component Node Parser. The manipulation of the argument bones_num results in heap-based buffer overflow. The attack can be executed remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-74498 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix DMA buffer out-of-bounds write when fill_max is set When a USB audio endpoint requests full packet transfers via the fill_max descriptor flag, data_ep_set_params() promotes ep->curpacksize to ep->maxpacksize. However, maxsize is left at the original sample-rate derived value. Since u->buffer_size is allocated as maxsize * packets, the resulting DMA buffer is far too small for the requested transfer length. When the USB host controller streams up to curpacksize bytes per packet, it writes past the end of the buffer via DMA, corrupting kernel heap memory. Update maxsize to curpacksize when fill_max is set so that the allocated DMA buffer size matches the actual transfer request size. [ changed to reassign maxsize only when ep->fill_max is set -- tiwai ] | ||||
| CVE-2026-74271 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: core: fix supplied_from allocations If dts property power-supplies has multiple values, then accessing to psy->supplied_from[i-1] in __power_supply_populate_supplied_from will overrun supplied_from array. | ||||
| CVE-2026-72156 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header() mpf_ops_parse_header() reads header_size from the bitstream at MPF_HEADER_SIZE_OFFSET (24). When header_size is zero, the expression *(buf + header_size - 1) reads one byte before the buffer start. Since initial_header_size is set to 71 in mpf_ops, the fpga-mgr core guarantees the buffer is large enough to reach MPF_HEADER_SIZE_OFFSET. The only real gap is the zero header_size case, which cannot be resolved by providing a larger buffer, so return -EINVAL. | ||||