Export limit exceeded: 18569 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (18569 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-26697 | 2 Intel, Linux | 2 Ethernet 700 Series Software, Linux Kernel | 2026-04-15 | 3.3 Low |
| Uncontrolled resource consumption in the Linux kernel-mode driver for some Intel(R) 700 Series Ethernet before version 2.28.5 may allow an authenticated user to potentially enable denial of service. | ||||
| CVE-2025-40266 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Check the untrusted offset in FF-A memory share Verify the offset to prevent OOB access in the hypervisor FF-A buffer in case an untrusted large enough value [U32_MAX - sizeof(struct ffa_composite_mem_region) + 1, U32_MAX] is set from the host kernel. | ||||
| CVE-2025-40169 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject negative offsets for ALU ops When verifying BPF programs, the check_alu_op() function validates instructions with ALU operations. The 'offset' field in these instructions is a signed 16-bit integer. The existing check 'insn->off > 1' was intended to ensure the offset is either 0, or 1 for BPF_MOD/BPF_DIV. However, because 'insn->off' is signed, this check incorrectly accepts all negative values (e.g., -1). This commit tightens the validation by changing the condition to '(insn->off != 0 && insn->off != 1)'. This ensures that any value other than the explicitly permitted 0 and 1 is rejected, hardening the verifier against malformed BPF programs. | ||||
| CVE-2022-50786 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: s5p-mfc: Clear workbit to handle error condition During error on CLOSE_INSTANCE command, ctx_work_bits was not getting cleared. During consequent mfc execution NULL pointer dereferencing of this context led to kernel panic. This patch fixes this issue by making sure to clear ctx_work_bits always. | ||||
| CVE-2025-68285 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: fix potential use-after-free in have_mon_and_osd_map() The wait loop in __ceph_open_session() can race with the client receiving a new monmap or osdmap shortly after the initial map is received. Both ceph_monc_handle_map() and handle_one_map() install a new map immediately after freeing the old one kfree(monc->monmap); monc->monmap = monmap; ceph_osdmap_destroy(osdc->osdmap); osdc->osdmap = newmap; under client->monc.mutex and client->osdc.lock respectively, but because neither is taken in have_mon_and_osd_map() it's possible for client->monc.monmap->epoch and client->osdc.osdmap->epoch arms in client->monc.monmap && client->monc.monmap->epoch && client->osdc.osdmap && client->osdc.osdmap->epoch; condition to dereference an already freed map. This happens to be reproducible with generic/395 and generic/397 with KASAN enabled: BUG: KASAN: slab-use-after-free in have_mon_and_osd_map+0x56/0x70 Read of size 4 at addr ffff88811012d810 by task mount.ceph/13305 CPU: 2 UID: 0 PID: 13305 Comm: mount.ceph Not tainted 6.14.0-rc2-build2+ #1266 ... Call Trace: <TASK> have_mon_and_osd_map+0x56/0x70 ceph_open_session+0x182/0x290 ceph_get_tree+0x333/0x680 vfs_get_tree+0x49/0x180 do_new_mount+0x1a3/0x2d0 path_mount+0x6dd/0x730 do_mount+0x99/0xe0 __do_sys_mount+0x141/0x180 do_syscall_64+0x9f/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Allocated by task 13305: ceph_osdmap_alloc+0x16/0x130 ceph_osdc_init+0x27a/0x4c0 ceph_create_client+0x153/0x190 create_fs_client+0x50/0x2a0 ceph_get_tree+0xff/0x680 vfs_get_tree+0x49/0x180 do_new_mount+0x1a3/0x2d0 path_mount+0x6dd/0x730 do_mount+0x99/0xe0 __do_sys_mount+0x141/0x180 do_syscall_64+0x9f/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 9475: kfree+0x212/0x290 handle_one_map+0x23c/0x3b0 ceph_osdc_handle_map+0x3c9/0x590 mon_dispatch+0x655/0x6f0 ceph_con_process_message+0xc3/0xe0 ceph_con_v1_try_read+0x614/0x760 ceph_con_workfn+0x2de/0x650 process_one_work+0x486/0x7c0 process_scheduled_works+0x73/0x90 worker_thread+0x1c8/0x2a0 kthread+0x2ec/0x300 ret_from_fork+0x24/0x40 ret_from_fork_asm+0x1a/0x30 Rewrite the wait loop to check the above condition directly with client->monc.mutex and client->osdc.lock taken as appropriate. While at it, improve the timeout handling (previously mount_timeout could be exceeded in case wait_event_interruptible_timeout() slept more than once) and access client->auth_err under client->monc.mutex to match how it's set in finish_auth(). monmap_show() and osdmap_show() now take the respective lock before accessing the map as well. | ||||
| CVE-2023-53792 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme-core: fix memory leak in dhchap_ctrl_secret Free dhchap_secret in nvme_ctrl_dhchap_ctrl_secret_store() before we return when nvme_auth_generate_key() returns error. | ||||
| CVE-2023-53787 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: da9063: fix null pointer deref with partial DT config When some of the da9063 regulators do not have corresponding DT nodes a null pointer dereference occurs on boot because such regulators have no init_data causing the pointers calculated in da9063_check_xvp_constraints() to be invalid. Do not dereference them in this case. | ||||
| CVE-2025-40344 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Disable periods-elapsed work when closing PCM avs_dai_fe_shutdown() handles the shutdown procedure for HOST HDAudio stream while period-elapsed work services its IRQs. As the former frees the DAI's private context, these two operations shall be synchronized to avoid slab-use-after-free or worse errors. | ||||
| CVE-2025-40327 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix system hang caused by cpu-clock usage cpu-clock usage by the async-profiler tool can trigger a system hang, which got bisected back to the following commit by Octavia Togami: 18dbcbfabfff ("perf: Fix the POLL_HUP delivery breakage") causes this issue The root cause of the hang is that cpu-clock is a special type of SW event which relies on hrtimers. The __perf_event_overflow() callback is invoked from the hrtimer handler for cpu-clock events, and __perf_event_overflow() tries to call cpu_clock_event_stop() to stop the event, which calls htimer_cancel() to cancel the hrtimer. But that's a recursion into the hrtimer code from a hrtimer handler, which (unsurprisingly) deadlocks. To fix this bug, use hrtimer_try_to_cancel() instead, and set the PERF_HES_STOPPED flag, which causes perf_swevent_hrtimer() to stop the event once it sees the PERF_HES_STOPPED flag. [ mingo: Fixed the comments and improved the changelog. ] | ||||
| CVE-2025-40321 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix crash while sending Action Frames in standalone AP Mode Currently, whenever there is a need to transmit an Action frame, the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to firmware. The P2P interfaces were available when wpa_supplicant is managing the wlan interface. However, the P2P interfaces are not created/initialized when only hostapd is managing the wlan interface. And if hostapd receives an ANQP Query REQ Action frame even from an un-associated STA, the brcmfmac driver tries to use an uninitialized P2P vif pointer for sending the IOVAR to firmware. This NULL pointer dereferencing triggers a driver crash. [ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] [ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [...] [ 1417.075653] Call trace: [ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac] [ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac] [ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211] [ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211] [ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158 [ 1417.076302] genl_rcv_msg+0x220/0x2a0 [ 1417.076317] netlink_rcv_skb+0x68/0x140 [ 1417.076330] genl_rcv+0x40/0x60 [ 1417.076343] netlink_unicast+0x330/0x3b8 [ 1417.076357] netlink_sendmsg+0x19c/0x3f8 [ 1417.076370] __sock_sendmsg+0x64/0xc0 [ 1417.076391] ____sys_sendmsg+0x268/0x2a0 [ 1417.076408] ___sys_sendmsg+0xb8/0x118 [ 1417.076427] __sys_sendmsg+0x90/0xf8 [ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40 [ 1417.076465] invoke_syscall+0x50/0x120 [ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0 [ 1417.076506] do_el0_svc+0x24/0x38 [ 1417.076525] el0_svc+0x30/0x100 [ 1417.076548] el0t_64_sync_handler+0x100/0x130 [ 1417.076569] el0t_64_sync+0x190/0x198 [ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000) Fix this, by always using the vif corresponding to the wdev on which the Action frame Transmission request was initiated by the userspace. This way, even if P2P vif is not available, the IOVAR is sent to firmware on AP vif and the ANQP Query RESP Action frame is transmitted without crashing the driver. Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev() to brcmf_p2p_attach(). Because the former function would not get executed when only hostapd is managing wlan interface, and it is not safe to do reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior init_completion(). And in the brcmf_p2p_tx_action_frame() function, the condition check for P2P Presence response frame is not needed, since the wpa_supplicant is properly sending the P2P Presense Response frame on the P2P-GO vif instead of the P2P-Device vif. [Cc stable] | ||||
| CVE-2025-68332 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: comedi: c6xdigio: Fix invalid PNP driver unregistration The Comedi low-level driver "c6xdigio" seems to be for a parallel port connected device. When the Comedi core calls the driver's Comedi "attach" handler `c6xdigio_attach()` to configure a Comedi to use this driver, it tries to enable the parallel port PNP resources by registering a PNP driver with `pnp_register_driver()`, but ignores the return value. (The `struct pnp_driver` it uses has only the `name` and `id_table` members filled in.) The driver's Comedi "detach" handler `c6xdigio_detach()` unconditionally unregisters the PNP driver with `pnp_unregister_driver()`. It is possible for `c6xdigio_attach()` to return an error before it calls `pnp_register_driver()` and it is possible for the call to `pnp_register_driver()` to return an error (that is ignored). In both cases, the driver should not be calling `pnp_unregister_driver()` as it does in `c6xdigio_detach()`. (Note that `c6xdigio_detach()` will be called by the Comedi core if `c6xdigio_attach()` returns an error, or if the Comedi core decides to detach the Comedi device from the driver for some other reason.) The unconditional call to `pnp_unregister_driver()` without a previous successful call to `pnp_register_driver()` will cause `driver_unregister()` to issue a warning "Unexpected driver unregister!". This was detected by Syzbot [1]. Also, the PNP driver registration and unregistration should be done at module init and exit time, respectively, not when attaching or detaching Comedi devices to the driver. (There might be more than one Comedi device being attached to the driver, although that is unlikely.) Change the driver to do the PNP driver registration at module init time, and the unregistration at module exit time. Since `c6xdigio_detach()` now only calls `comedi_legacy_detach()`, remove the function and change the Comedi driver "detach" handler to `comedi_legacy_detach`. ------------------------------------------- [1] Syzbot sample crash report: Unexpected driver unregister! WARNING: CPU: 0 PID: 5970 at drivers/base/driver.c:273 driver_unregister drivers/base/driver.c:273 [inline] WARNING: CPU: 0 PID: 5970 at drivers/base/driver.c:273 driver_unregister+0x90/0xb0 drivers/base/driver.c:270 Modules linked in: CPU: 0 UID: 0 PID: 5970 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025 RIP: 0010:driver_unregister drivers/base/driver.c:273 [inline] RIP: 0010:driver_unregister+0x90/0xb0 drivers/base/driver.c:270 Code: 48 89 ef e8 c2 e6 82 fc 48 89 df e8 3a 93 ff ff 5b 5d e9 c3 6d d9 fb e8 be 6d d9 fb 90 48 c7 c7 e0 f8 1f 8c e8 51 a2 97 fb 90 <0f> 0b 90 90 5b 5d e9 a5 6d d9 fb e8 e0 f4 41 fc eb 94 e8 d9 f4 41 RSP: 0018:ffffc9000373f9a0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffff8ff24720 RCX: ffffffff817b6ee8 RDX: ffff88807c932480 RSI: ffffffff817b6ef5 RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffffffff8ff24660 R13: dffffc0000000000 R14: 0000000000000000 R15: ffff88814cca0000 FS: 000055556dab1500(0000) GS:ffff8881249d9000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f77f285cd0 CR3: 000000007d871000 CR4: 00000000003526f0 Call Trace: <TASK> comedi_device_detach_locked+0x12f/0xa50 drivers/comedi/drivers.c:207 comedi_device_detach+0x67/0xb0 drivers/comedi/drivers.c:215 comedi_device_attach+0x43d/0x900 drivers/comedi/drivers.c:1011 do_devconfig_ioctl+0x1b1/0x710 drivers/comedi/comedi_fops.c:872 comedi_unlocked_ioctl+0x165d/0x2f00 drivers/comedi/comedi_fops.c:2178 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_sys ---truncated--- | ||||
| CVE-2025-40267 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/rw: ensure allocated iovec gets cleared for early failure A previous commit reused the recyling infrastructure for early cleanup, but this is not enough for the case where our internal caches have overflowed. If this happens, then the allocated iovec can get leaked if the request is also aborted early. Reinstate the previous forced free of the iovec for that situation. | ||||
| CVE-2025-68342 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: gs_usb_receive_bulk_callback(): check actual_length before accessing data The URB received in gs_usb_receive_bulk_callback() contains a struct gs_host_frame. The length of the data after the header depends on the gs_host_frame hf::flags and the active device features (e.g. time stamping). Introduce a new function gs_usb_get_minimum_length() and check that we have at least received the required amount of data before accessing it. Only copy the data to that skb that has actually been received. [mkl: rename gs_usb_get_minimum_length() -> +gs_usb_get_minimum_rx_length()] | ||||
| CVE-2025-68362 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtl818x: rtl8187: Fix potential buffer underflow in rtl8187_rx_cb() The rtl8187_rx_cb() calculates the rx descriptor header address by subtracting its size from the skb tail pointer. However, it does not validate if the received packet (skb->len from urb->actual_length) is large enough to contain this header. If a truncated packet is received, this will lead to a buffer underflow, reading memory before the start of the skb data area, and causing a kernel panic. Add length checks for both rtl8187 and rtl8187b descriptor headers before attempting to access them, dropping the packet cleanly if the check fails. | ||||
| CVE-2025-68364 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: relax BUG() to ocfs2_error() in __ocfs2_move_extent() In '__ocfs2_move_extent()', relax 'BUG()' to 'ocfs2_error()' just to avoid crashing the whole kernel due to a filesystem corruption. | ||||
| CVE-2023-54049 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rpmsg: glink: Add check for kstrdup Add check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer dereference. | ||||
| CVE-2025-68367 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: macintosh/mac_hid: fix race condition in mac_hid_toggle_emumouse The following warning appears when running syzkaller, and this issue also exists in the mainline code. ------------[ cut here ]------------ list_add double add: new=ffffffffa57eee28, prev=ffffffffa57eee28, next=ffffffffa5e63100. WARNING: CPU: 0 PID: 1491 at lib/list_debug.c:35 __list_add_valid_or_report+0xf7/0x130 Modules linked in: CPU: 0 PID: 1491 Comm: syz.1.28 Not tainted 6.6.0+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__list_add_valid_or_report+0xf7/0x130 RSP: 0018:ff1100010dfb7b78 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffffa57eee18 RCX: ffffffff97fc9817 RDX: 0000000000040000 RSI: ffa0000002383000 RDI: 0000000000000001 RBP: ffffffffa57eee28 R08: 0000000000000001 R09: ffe21c0021bf6f2c R10: 0000000000000001 R11: 6464615f7473696c R12: ffffffffa5e63100 R13: ffffffffa57eee28 R14: ffffffffa57eee28 R15: ff1100010dfb7d48 FS: 00007fb14398b640(0000) GS:ff11000119600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010d096005 CR4: 0000000000773ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 80000000 Call Trace: <TASK> input_register_handler+0xb3/0x210 mac_hid_start_emulation+0x1c5/0x290 mac_hid_toggle_emumouse+0x20a/0x240 proc_sys_call_handler+0x4c2/0x6e0 new_sync_write+0x1b1/0x2d0 vfs_write+0x709/0x950 ksys_write+0x12a/0x250 do_syscall_64+0x5a/0x110 entry_SYSCALL_64_after_hwframe+0x78/0xe2 The WARNING occurs when two processes concurrently write to the mac-hid emulation sysctl, causing a race condition in mac_hid_toggle_emumouse(). Both processes read old_val=0, then both try to register the input handler, leading to a double list_add of the same handler. CPU0 CPU1 ------------------------- ------------------------- vfs_write() //write 1 vfs_write() //write 1 proc_sys_write() proc_sys_write() mac_hid_toggle_emumouse() mac_hid_toggle_emumouse() old_val = *valp // old_val=0 old_val = *valp // old_val=0 mutex_lock_killable() proc_dointvec() // *valp=1 mac_hid_start_emulation() input_register_handler() mutex_unlock() mutex_lock_killable() proc_dointvec() mac_hid_start_emulation() input_register_handler() //Trigger Warning mutex_unlock() Fix this by moving the old_val read inside the mutex lock region. | ||||
| CVE-2025-68756 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: Use RCU in blk_mq_[un]quiesce_tagset() instead of set->tag_list_lock blk_mq_{add,del}_queue_tag_set() functions add and remove queues from tagset, the functions make sure that tagset and queues are marked as shared when two or more queues are attached to the same tagset. Initially a tagset starts as unshared and when the number of added queues reaches two, blk_mq_add_queue_tag_set() marks it as shared along with all the queues attached to it. When the number of attached queues drops to 1 blk_mq_del_queue_tag_set() need to mark both the tagset and the remaining queues as unshared. Both functions need to freeze current queues in tagset before setting on unsetting BLK_MQ_F_TAG_QUEUE_SHARED flag. While doing so, both functions hold set->tag_list_lock mutex, which makes sense as we do not want queues to be added or deleted in the process. This used to work fine until commit 98d81f0df70c ("nvme: use blk_mq_[un]quiesce_tagset") made the nvme driver quiesce tagset instead of quiscing individual queues. blk_mq_quiesce_tagset() does the job and quiesce the queues in set->tag_list while holding set->tag_list_lock also. This results in deadlock between two threads with these stacktraces: __schedule+0x47c/0xbb0 ? timerqueue_add+0x66/0xb0 schedule+0x1c/0xa0 schedule_preempt_disabled+0xa/0x10 __mutex_lock.constprop.0+0x271/0x600 blk_mq_quiesce_tagset+0x25/0xc0 nvme_dev_disable+0x9c/0x250 nvme_timeout+0x1fc/0x520 blk_mq_handle_expired+0x5c/0x90 bt_iter+0x7e/0x90 blk_mq_queue_tag_busy_iter+0x27e/0x550 ? __blk_mq_complete_request_remote+0x10/0x10 ? __blk_mq_complete_request_remote+0x10/0x10 ? __call_rcu_common.constprop.0+0x1c0/0x210 blk_mq_timeout_work+0x12d/0x170 process_one_work+0x12e/0x2d0 worker_thread+0x288/0x3a0 ? rescuer_thread+0x480/0x480 kthread+0xb8/0xe0 ? kthread_park+0x80/0x80 ret_from_fork+0x2d/0x50 ? kthread_park+0x80/0x80 ret_from_fork_asm+0x11/0x20 __schedule+0x47c/0xbb0 ? xas_find+0x161/0x1a0 schedule+0x1c/0xa0 blk_mq_freeze_queue_wait+0x3d/0x70 ? destroy_sched_domains_rcu+0x30/0x30 blk_mq_update_tag_set_shared+0x44/0x80 blk_mq_exit_queue+0x141/0x150 del_gendisk+0x25a/0x2d0 nvme_ns_remove+0xc9/0x170 nvme_remove_namespaces+0xc7/0x100 nvme_remove+0x62/0x150 pci_device_remove+0x23/0x60 device_release_driver_internal+0x159/0x200 unbind_store+0x99/0xa0 kernfs_fop_write_iter+0x112/0x1e0 vfs_write+0x2b1/0x3d0 ksys_write+0x4e/0xb0 do_syscall_64+0x5b/0x160 entry_SYSCALL_64_after_hwframe+0x4b/0x53 The top stacktrace is showing nvme_timeout() called to handle nvme command timeout. timeout handler is trying to disable the controller and as a first step, it needs to blk_mq_quiesce_tagset() to tell blk-mq not to call queue callback handlers. The thread is stuck waiting for set->tag_list_lock as it tries to walk the queues in set->tag_list. The lock is held by the second thread in the bottom stack which is waiting for one of queues to be frozen. The queue usage counter will drop to zero after nvme_timeout() finishes, and this will not happen because the thread will wait for this mutex forever. Given that [un]quiescing queue is an operation that does not need to sleep, update blk_mq_[un]quiesce_tagset() to use RCU instead of taking set->tag_list_lock, update blk_mq_{add,del}_queue_tag_set() to use RCU safe list operations. Also, delete INIT_LIST_HEAD(&q->tag_set_list) in blk_mq_del_queue_tag_set() because we can not re-initialize it while the list is being traversed under RCU. The deleted queue will not be added/deleted to/from a tagset and it will be freed in blk_free_queue() after the end of RCU grace period. | ||||
| CVE-2025-68751 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/fpu: Fix false-positive kmsan report in fpu_vstl() A false-positive kmsan report is detected when running ping command. An inline assembly instruction 'vstl' can write varied amount of bytes depending on value of 'index' argument. If 'index' > 0, 'vstl' writes at least 2 bytes. clang generates kmsan write helper call depending on inline assembly constraints. Constraints are evaluated compile-time, but value of 'index' argument is known only at runtime. clang currently generates call to __msan_instrument_asm_store with 1 byte as size. Manually call kmsan function to indicate correct amount of bytes written and fix false-positive report. This change fixes following kmsan reports: [ 36.563119] ===================================================== [ 36.563594] BUG: KMSAN: uninit-value in virtqueue_add+0x35c6/0x7c70 [ 36.563852] virtqueue_add+0x35c6/0x7c70 [ 36.564016] virtqueue_add_outbuf+0xa0/0xb0 [ 36.564266] start_xmit+0x288c/0x4a20 [ 36.564460] dev_hard_start_xmit+0x302/0x900 [ 36.564649] sch_direct_xmit+0x340/0xea0 [ 36.564894] __dev_queue_xmit+0x2e94/0x59b0 [ 36.565058] neigh_resolve_output+0x936/0xb40 [ 36.565278] __neigh_update+0x2f66/0x3a60 [ 36.565499] neigh_update+0x52/0x60 [ 36.565683] arp_process+0x1588/0x2de0 [ 36.565916] NF_HOOK+0x1da/0x240 [ 36.566087] arp_rcv+0x3e4/0x6e0 [ 36.566306] __netif_receive_skb_list_core+0x1374/0x15a0 [ 36.566527] netif_receive_skb_list_internal+0x1116/0x17d0 [ 36.566710] napi_complete_done+0x376/0x740 [ 36.566918] virtnet_poll+0x1bae/0x2910 [ 36.567130] __napi_poll+0xf4/0x830 [ 36.567294] net_rx_action+0x97c/0x1ed0 [ 36.567556] handle_softirqs+0x306/0xe10 [ 36.567731] irq_exit_rcu+0x14c/0x2e0 [ 36.567910] do_io_irq+0xd4/0x120 [ 36.568139] io_int_handler+0xc2/0xe8 [ 36.568299] arch_cpu_idle+0xb0/0xc0 [ 36.568540] arch_cpu_idle+0x76/0xc0 [ 36.568726] default_idle_call+0x40/0x70 [ 36.568953] do_idle+0x1d6/0x390 [ 36.569486] cpu_startup_entry+0x9a/0xb0 [ 36.569745] rest_init+0x1ea/0x290 [ 36.570029] start_kernel+0x95e/0xb90 [ 36.570348] startup_continue+0x2e/0x40 [ 36.570703] [ 36.570798] Uninit was created at: [ 36.571002] kmem_cache_alloc_node_noprof+0x9e8/0x10e0 [ 36.571261] kmalloc_reserve+0x12a/0x470 [ 36.571553] __alloc_skb+0x310/0x860 [ 36.571844] __ip_append_data+0x483e/0x6a30 [ 36.572170] ip_append_data+0x11c/0x1e0 [ 36.572477] raw_sendmsg+0x1c8c/0x2180 [ 36.572818] inet_sendmsg+0xe6/0x190 [ 36.573142] __sys_sendto+0x55e/0x8e0 [ 36.573392] __s390x_sys_socketcall+0x19ae/0x2ba0 [ 36.573571] __do_syscall+0x12e/0x240 [ 36.573823] system_call+0x6e/0x90 [ 36.573976] [ 36.574017] Byte 35 of 98 is uninitialized [ 36.574082] Memory access of size 98 starts at 0000000007aa0012 [ 36.574218] [ 36.574325] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G B N 6.17.0-dirty #16 NONE [ 36.574541] Tainted: [B]=BAD_PAGE, [N]=TEST [ 36.574617] Hardware name: IBM 3931 A01 703 (KVM/Linux) [ 36.574755] ===================================================== [ 63.532541] ===================================================== [ 63.533639] BUG: KMSAN: uninit-value in virtqueue_add+0x35c6/0x7c70 [ 63.533989] virtqueue_add+0x35c6/0x7c70 [ 63.534940] virtqueue_add_outbuf+0xa0/0xb0 [ 63.535861] start_xmit+0x288c/0x4a20 [ 63.536708] dev_hard_start_xmit+0x302/0x900 [ 63.537020] sch_direct_xmit+0x340/0xea0 [ 63.537997] __dev_queue_xmit+0x2e94/0x59b0 [ 63.538819] neigh_resolve_output+0x936/0xb40 [ 63.539793] ip_finish_output2+0x1ee2/0x2200 [ 63.540784] __ip_finish_output+0x272/0x7a0 [ 63.541765] ip_finish_output+0x4e/0x5e0 [ 63.542791] ip_output+0x166/0x410 [ 63.543771] ip_push_pending_frames+0x1a2/0x470 [ 63.544753] raw_sendmsg+0x1f06/0x2180 [ 63.545033] inet_sendmsg+0xe6/0x190 [ 63.546006] __sys_sendto+0x55e/0x8e0 ---truncated--- | ||||
| CVE-2025-40276 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Flush shmem writes before mapping buffers CPU-uncached The shmem layer zeroes out the new pages using cached mappings, and if we don't CPU-flush we might leave dirty cachelines behind, leading to potential data leaks and/or asynchronous buffer corruption when dirty cachelines are evicted. | ||||