Export limit exceeded: 346183 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 76240 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (76240 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23074 | 1 Linux | 1 Linux Kernel | 2026-04-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: Enforce that teql can only be used as root qdisc Design intent of teql is that it is only supposed to be used as root qdisc. We need to check for that constraint. Although not important, I will describe the scenario that unearthed this issue for the curious. GangMin Kim <km.kim1503@gmail.com> managed to concot a scenario as follows: ROOT qdisc 1:0 (QFQ) ├── class 1:1 (weight=15, lmax=16384) netem with delay 6.4s └── class 1:2 (weight=1, lmax=1514) teql GangMin sends a packet which is enqueued to 1:1 (netem). Any invocation of dequeue by QFQ from this class will not return a packet until after 6.4s. In the meantime, a second packet is sent and it lands on 1:2. teql's enqueue will return success and this will activate class 1:2. Main issue is that teql only updates the parent visible qlen (sch->q.qlen) at dequeue. Since QFQ will only call dequeue if peek succeeds (and teql's peek always returns NULL), dequeue will never be called and thus the qlen will remain as 0. With that in mind, when GangMin updates 1:2's lmax value, the qfq_change_class calls qfq_deact_rm_from_agg. Since the child qdisc's qlen was not incremented, qfq fails to deactivate the class, but still frees its pointers from the aggregate. So when the first packet is rescheduled after 6.4 seconds (netem's delay), a dangling pointer is accessed causing GangMin's causing a UAF. | ||||
| CVE-2026-23103 | 1 Linux | 1 Linux Kernel | 2026-04-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipvlan: Make the addrs_lock be per port Make the addrs_lock be per port, not per ipvlan dev. Initial code seems to be written in the assumption, that any address change must occur under RTNL. But it is not so for the case of IPv6. So 1) Introduce per-port addrs_lock. 2) It was needed to fix places where it was forgotten to take lock (ipvlan_open/ipvlan_close) This appears to be a very minor problem though. Since it's highly unlikely that ipvlan_add_addr() will be called on 2 CPU simultaneously. But nevertheless, this could cause: 1) False-negative of ipvlan_addr_busy(): one interface iterated through all port->ipvlans + ipvlan->addrs under some ipvlan spinlock, and another added IP under its own lock. Though this is only possible for IPv6, since looks like only ipvlan_addr6_event() can be called without rtnl_lock. 2) Race since ipvlan_ht_addr_add(port) is called under different ipvlan->addrs_lock locks This should not affect performance, since add/remove IP is a rare situation and spinlock is not taken on fast paths. | ||||
| CVE-2026-23105 | 1 Linux | 1 Linux Kernel | 2026-04-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: qfq: Use cl_is_active to determine whether class is active in qfq_rm_from_ag This is more of a preventive patch to make the code more consistent and to prevent possible exploits that employ child qlen manipulations on qfq. use cl_is_active instead of relying on the child qdisc's qlen to determine class activation. | ||||
| CVE-2026-2268 | 2 Kstover, Wordpress | 2 Ninja Forms – The Contact Form Builder That Grows With You, Wordpress | 2026-04-16 | 7.5 High |
| The Ninja Forms plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.14.0. This is due to the unsafe application of the `ninja_forms_merge_tags` filter to user-supplied input within repeater fields, which allows the resolution of `{post_meta:KEY}` merge tags without authorization checks. This makes it possible for unauthenticated attackers to extract arbitrary post metadata from any post on the site, including sensitive data such as WooCommerce billing emails, API keys, private tokens, and customer personal information via the `nf_ajax_submit` AJAX action. | ||||
| CVE-2026-0651 | 1 Tp-link | 3 Tapo C260, Tapo C260 Firmware, Tapo C260 V1 | 2026-04-16 | 7.8 High |
| A path traversal vulnerability was identified TP-Link Tapo C260 v1, D235 v1 and C520WS v2.6 within the HTTP server’s handling of GET requests. The server performs path normalization before fully decoding URL encoded input and falls back to using the raw path when normalization fails. An attacker can exploit this logic flaw by supplying crafted, URL encoded traversal sequences that bypass directory restrictions and allow access to files outside the intended web root. Successful exploitation may allow authenticated attackers to get disclosure of sensitive system files and credentials, while unauthenticated attackers may gain access to non-sensitive static assets. | ||||
| CVE-2026-21229 | 1 Microsoft | 1 Power Bi Report Server | 2026-04-16 | 8 High |
| Improper input validation in Power BI allows an authorized attacker to execute code over a network. | ||||
| CVE-2026-20667 | 1 Apple | 5 Ios And Ipados, Ipados, Iphone Os and 2 more | 2026-04-16 | 8.8 High |
| A logic issue was addressed with improved checks. This issue is fixed in iOS 26.3 and iPadOS 26.3, macOS Sequoia 15.7.4, macOS Sonoma 14.8.4, macOS Tahoe 26.3, watchOS 26.3. An app may be able to break out of its sandbox. | ||||
| CVE-2026-5208 | 1 Coolercontrol | 1 Coolercontrold | 2026-04-16 | 8.2 High |
| Command injection in alerts in CoolerControl/coolercontrold <4.0.0 allows authenticated attackers to execute arbitrary code as root via injected bash commands in alert names | ||||
| CVE-2026-20620 | 1 Apple | 1 Macos | 2026-04-16 | 7.7 High |
| An out-of-bounds read issue was addressed with improved input validation. This issue is fixed in macOS Sequoia 15.7.4, macOS Sonoma 14.8.4, macOS Tahoe 26.3. An attacker may be able to cause unexpected system termination or read kernel memory. | ||||
| CVE-2026-20675 | 1 Apple | 7 Ios And Ipados, Ipados, Iphone Os and 4 more | 2026-04-16 | 7.8 High |
| The issue was addressed with improved bounds checks. This issue is fixed in iOS 18.7.5 and iPadOS 18.7.5, iOS 26.3 and iPadOS 26.3, macOS Sequoia 15.7.4, macOS Sonoma 14.8.4, macOS Tahoe 26.3, tvOS 26.3, visionOS 26.3, watchOS 26.3. Processing a maliciously crafted image may lead to disclosure of user information. | ||||
| CVE-2026-20658 | 1 Apple | 1 Macos | 2026-04-16 | 7.8 High |
| A package validation issue was addressed by blocking the vulnerable package. This issue is fixed in macOS Tahoe 26.3. An app may be able to gain root privileges. | ||||
| CVE-2026-1104 | 2 Ninjateam, Wordpress | 2 Fastdup – Fastest Wordpress Migration & Duplicator, Wordpress | 2026-04-16 | 8.8 High |
| The FastDup – Fastest WordPress Migration & Duplicator plugin for WordPress is vulnerable to unauthorized backup creation and download due to a missing capability check on REST API endpoints in all versions up to, and including, 2.7.1. This makes it possible for authenticated attackers, with Contributor-level access and above, to create and download full-site backup archives containing the entire WordPress installation, including database exports and configuration files. | ||||
| CVE-2026-5301 | 1 Coolercontrol | 2 Coolercontrol-ui, Coolercontrold | 2026-04-16 | 7.6 High |
| Stored XSS in log viewer in CoolerControl/coolercontrol-ui <4.0.0 allows unauthenticated attackers to take over the service via malicious JavaScript in poisoned log entries | ||||
| CVE-2026-23184 | 1 Linux | 1 Linux Kernel | 2026-04-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF in binder_netlink_report() Oneway transactions sent to frozen targets via binder_proc_transaction() return a BR_TRANSACTION_PENDING_FROZEN error but they are still treated as successful since the target is expected to thaw at some point. It is then not safe to access 't' after BR_TRANSACTION_PENDING_FROZEN errors as the transaction could have been consumed by the now thawed target. This is the case for binder_netlink_report() which derreferences 't' after a pending frozen error, as pointed out by the following KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in binder_netlink_report.isra.0+0x694/0x6c8 Read of size 8 at addr ffff00000f98ba38 by task binder-util/522 CPU: 4 UID: 0 PID: 522 Comm: binder-util Not tainted 6.19.0-rc6-00015-gc03e9c42ae8f #1 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: binder_netlink_report.isra.0+0x694/0x6c8 binder_transaction+0x66e4/0x79b8 binder_thread_write+0xab4/0x4440 binder_ioctl+0x1fd4/0x2940 [...] Allocated by task 522: __kmalloc_cache_noprof+0x17c/0x50c binder_transaction+0x584/0x79b8 binder_thread_write+0xab4/0x4440 binder_ioctl+0x1fd4/0x2940 [...] Freed by task 488: kfree+0x1d0/0x420 binder_free_transaction+0x150/0x234 binder_thread_read+0x2d08/0x3ce4 binder_ioctl+0x488/0x2940 [...] ================================================================== Instead, make a transaction copy so the data can be safely accessed by binder_netlink_report() after a pending frozen error. While here, add a comment about not using t->buffer in binder_netlink_report(). | ||||
| CVE-2026-23185 | 1 Linux | 1 Linux Kernel | 2026-04-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: cancel mlo_scan_start_wk mlo_scan_start_wk is not canceled on disconnection. In fact, it is not canceled anywhere except in the restart cleanup, where we don't really have to. This can cause an init-after-queue issue: if, for example, the work was queued and then drv_change_interface got executed. This can also cause use-after-free: if the work is executed after the vif is freed. | ||||
| CVE-2026-23192 | 1 Linux | 1 Linux Kernel | 2026-04-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: linkwatch: use __dev_put() in callers to prevent UAF After linkwatch_do_dev() calls __dev_put() to release the linkwatch reference, the device refcount may drop to 1. At this point, netdev_run_todo() can proceed (since linkwatch_sync_dev() sees an empty list and returns without blocking), wait for the refcount to become 1 via netdev_wait_allrefs_any(), and then free the device via kobject_put(). This creates a use-after-free when __linkwatch_run_queue() tries to call netdev_unlock_ops() on the already-freed device. Note that adding netdev_lock_ops()/netdev_unlock_ops() pair in netdev_run_todo() before kobject_put() would not work, because netdev_lock_ops() is conditional - it only locks when netdev_need_ops_lock() returns true. If the device doesn't require ops_lock, linkwatch won't hold any lock, and netdev_run_todo() acquiring the lock won't provide synchronization. Fix this by moving __dev_put() from linkwatch_do_dev() to its callers. The device reference logically pairs with de-listing the device, so it's reasonable for the caller that did the de-listing to release it. This allows placing __dev_put() after all device accesses are complete, preventing UAF. The bug can be reproduced by adding mdelay(2000) after linkwatch_do_dev() in __linkwatch_run_queue(), then running: ip tuntap add mode tun name tun_test ip link set tun_test up ip link set tun_test carrier off ip link set tun_test carrier on sleep 0.5 ip tuntap del mode tun name tun_test KASAN report: ================================================================== BUG: KASAN: use-after-free in netdev_need_ops_lock include/net/netdev_lock.h:33 [inline] BUG: KASAN: use-after-free in netdev_unlock_ops include/net/netdev_lock.h:47 [inline] BUG: KASAN: use-after-free in __linkwatch_run_queue+0x865/0x8a0 net/core/link_watch.c:245 Read of size 8 at addr ffff88804de5c008 by task kworker/u32:10/8123 CPU: 0 UID: 0 PID: 8123 Comm: kworker/u32:10 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: events_unbound linkwatch_event Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x156/0x4c9 mm/kasan/report.c:482 kasan_report+0xdf/0x1a0 mm/kasan/report.c:595 netdev_need_ops_lock include/net/netdev_lock.h:33 [inline] netdev_unlock_ops include/net/netdev_lock.h:47 [inline] __linkwatch_run_queue+0x865/0x8a0 net/core/link_watch.c:245 linkwatch_event+0x8f/0xc0 net/core/link_watch.c:304 process_one_work+0x9c2/0x1840 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x5da/0xe40 kernel/workqueue.c:3421 kthread+0x3b3/0x730 kernel/kthread.c:463 ret_from_fork+0x754/0xaf0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 </TASK> ================================================================== | ||||
| CVE-2026-23195 | 1 Linux | 1 Linux Kernel | 2026-04-16 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: cgroup/dmem: avoid pool UAF An UAF issue was observed: BUG: KASAN: slab-use-after-free in page_counter_uncharge+0x65/0x150 Write of size 8 at addr ffff888106715440 by task insmod/527 CPU: 4 UID: 0 PID: 527 Comm: insmod 6.19.0-rc7-next-20260129+ #11 Tainted: [O]=OOT_MODULE Call Trace: <TASK> dump_stack_lvl+0x82/0xd0 kasan_report+0xca/0x100 kasan_check_range+0x39/0x1c0 page_counter_uncharge+0x65/0x150 dmem_cgroup_uncharge+0x1f/0x260 Allocated by task 527: Freed by task 0: The buggy address belongs to the object at ffff888106715400 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 64 bytes inside of freed 512-byte region [ffff888106715400, ffff888106715600) The buggy address belongs to the physical page: Memory state around the buggy address: ffff888106715300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888106715380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff888106715400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888106715480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888106715500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb The issue occurs because a pool can still be held by a caller after its associated memory region is unregistered. The current implementation frees the pool even if users still hold references to it (e.g., before uncharge operations complete). This patch adds a reference counter to each pool, ensuring that a pool is only freed when its reference count drops to zero. | ||||
| CVE-2026-23204 | 1 Linux | 1 Linux Kernel | 2026-04-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: use skb_header_pointer_careful() skb_header_pointer() does not fully validate negative @offset values. Use skb_header_pointer_careful() instead. GangMin Kim provided a report and a repro fooling u32_classify(): BUG: KASAN: slab-out-of-bounds in u32_classify+0x1180/0x11b0 net/sched/cls_u32.c:221 | ||||
| CVE-2026-23209 | 1 Linux | 1 Linux Kernel | 2026-04-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: macvlan: fix error recovery in macvlan_common_newlink() valis provided a nice repro to crash the kernel: ip link add p1 type veth peer p2 ip link set address 00:00:00:00:00:20 dev p1 ip link set up dev p1 ip link set up dev p2 ip link add mv0 link p2 type macvlan mode source ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20 ping -c1 -I p1 1.2.3.4 He also gave a very detailed analysis: <quote valis> The issue is triggered when a new macvlan link is created with MACVLAN_MODE_SOURCE mode and MACVLAN_MACADDR_ADD (or MACVLAN_MACADDR_SET) parameter, lower device already has a macvlan port and register_netdevice() called from macvlan_common_newlink() fails (e.g. because of the invalid link name). In this case macvlan_hash_add_source is called from macvlan_change_sources() / macvlan_common_newlink(): This adds a reference to vlan to the port's vlan_source_hash using macvlan_source_entry. vlan is a pointer to the priv data of the link that is being created. When register_netdevice() fails, the error is returned from macvlan_newlink() to rtnl_newlink_create(): if (ops->newlink) err = ops->newlink(dev, ¶ms, extack); else err = register_netdevice(dev); if (err < 0) { free_netdev(dev); goto out; } and free_netdev() is called, causing a kvfree() on the struct net_device that is still referenced in the source entry attached to the lower device's macvlan port. Now all packets sent on the macvlan port with a matching source mac address will trigger a use-after-free in macvlan_forward_source(). </quote valis> With all that, my fix is to make sure we call macvlan_flush_sources() regardless of @create value whenever "goto destroy_macvlan_port;" path is taken. Many thanks to valis for following up on this issue. | ||||
| CVE-2004-1703 | 1 Fusionphp | 1 Fusion News | 2026-04-16 | 8.8 High |
| Fusion News 3.6.1 allows remote attackers to add user accounts, if the administrator is logged in, via a comment that contains an img bbcode tag that calls index.php with the signup action, which is executed when the administrator's browser loads the page with the img tag. | ||||