Export limit exceeded: 373512 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 90885 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (90885 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64529 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - remove unused character device and IOCTLs The QAT driver exposes a character device (qat_adf_ctl) with IOCTLs for device configuration, start, stop, status query and enumeration. These IOCTLs are not part of any public uAPI header and have no known in-tree or out-of-tree users. Device lifecycle is already managed via sysfs. The ioctl interface also increases the attack surface and is the subject of a number of bug reports. Remove the character device, the IOCTL definitions, and the related data structures (adf_dev_status_info, adf_user_cfg_key_val, adf_user_cfg_section, adf_user_cfg_ctl_data). Drop the now-unused adf_cfg_user.h header and strip adf_ctl_drv.c down to the minimal module_init/module_exit hooks for workqueue, AER, and crypto/compression algorithm registration. Clean up leftover dead code that was only reachable from the removed IOCTL paths: adf_cfg_del_all(), adf_devmgr_verify_id(), adf_devmgr_get_num_dev(), adf_devmgr_get_dev_by_id(), adf_get_vf_real_id() and the unused ADF_CFG macros. Additionally, drop the entry associated to QAT IOCTLs in ioctl-number.rst. | ||||
| CVE-2026-64496 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: event: Fix event FIFO reset race `iio_event_getfd()` creates the event file descriptor with `anon_inode_getfd()`, which allocates a new fd, creates the anonymous file and installs it in the process fd table before returning to the caller. The IIO code resets the event FIFO after `anon_inode_getfd()` has returned, but before `IIO_GET_EVENT_FD_IOCTL` has copied the fd number to userspace. But since fd tables are shared between threads, another thread can guess the newly allocated fd number and issue a `read()` on it as soon as the fd has been installed. This means the `kfifo_to_user()` in `iio_event_chrdev_read()` can run in parallel with the `kfifo_reset_out()` in `iio_event_getfd()`. The kfifo documentation says that `kfifo_reset_out()` is only safe when it is called from the reader thread and there is only one concurrent reader. Otherwise it is dangerous and must be handled in the same way as `kfifo_reset()`. If that happens, `kfifo_to_user()` can advance the FIFO `out` index based on state from before the reset, after the reset has already moved the `out` index to the current `in` index. That can leave the FIFO with an `out` index past the `in` index. A later `read()` can then see an underflowed FIFO length and copy more data than the event FIFO buffer contains. This can result in an out-of-bounds read and leak adjacent kernel memory to userspace. Move the FIFO reset before `anon_inode_getfd()`. At that point the event fd is marked busy, but the new fd has not been installed yet, so userspace cannot access it while the FIFO is reset. | ||||
| CVE-2026-64452 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: 6lowpan: fix NHC entry use-after-free on error path lowpan_nhc_do_uncompression() looks up an NHC descriptor while holding lowpan_nhc_lock. If the descriptor has no uncompress callback, the error path drops the lock before printing nhc->name. lowpan_nhc_del() removes descriptors under the same lock and then relies on synchronize_net() before the owning module can be unloaded. That only waits for net RX RCU readers. lowpan_header_decompress() is also exported and can be reached from callers that are not necessarily covered by the net core RX critical section, for example the Bluetooth 6LoWPAN L2CAP receive path. This leaves a race where one task drops lowpan_nhc_lock in the error path, another task unregisters and frees the matching descriptor after synchronize_net() returns, and the first task then dereferences nhc->name for the warning. With the post-unlock window widened, KASAN reports: BUG: KASAN: slab-use-after-free in lowpan_nhc_do_uncompression+0x1f4/0x220 Read of size 8 lowpan_nhc_do_uncompression lowpan_header_decompress Fix this by printing the warning before dropping lowpan_nhc_lock, so the descriptor name is read while unregister is still excluded. The malformed packet is still rejected with -ENOTSUPP. | ||||
| CVE-2026-64449 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: vme_user: bound slave read/write to the kern_buf size The SLAVE-path helpers buffer_to_user() and buffer_from_user() copy 'count' bytes into/out of the fixed-size kern_buf (size_buf == PCI_BUF_SIZE == 0x20000, 128 KiB) using *ppos as the offset, without bounding *ppos + count against size_buf. vme_user_write()/vme_user_read() only clamp count to the VME window size (image_size = vme_get_size(resource)), which VME_SET_SLAVE sets from the user-supplied slave.size -- validated against the VME address space (up to VME_A32_MAX = 4 GiB), not against PCI_BUF_SIZE. When the window exceeds 128 KiB, a write()/read() copies past the kern_buf allocation. Clamp count against size_buf in both helpers, with an early return when *ppos is already at/after the buffer end. *ppos is >= 0 here (the caller rejects negative offsets), so size_buf - *ppos cannot wrap. This mirrors the existing clamp in the MASTER-path helpers resource_to_user() / resource_from_user(), and matches the read()/write() convention of a short transfer at end-of-buffer. Found by static analysis (CodeQL taint tracking + CBMC bounded model checking) and confirmed dynamically under KASAN with the vme_fake bridge: BUG: KASAN: slab-out-of-bounds in _copy_from_user+0x2d/0x80 Write of size 262144 at addr ffff888004100000 by task trigger/68 _copy_from_user+0x2d/0x80 vme_user_write+0x13e/0x240 [vme_user] vfs_write+0x1b8/0x7a0 ksys_write+0xb8/0x150 | ||||
| CVE-2026-64447 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: media: ipu7: fix double-free and use-after-free in error paths In both ipu7_isys_init() and ipu7_psys_init(), pdata is allocated and then passed to ipu7_bus_initialize_device(), which stores it in adev->pdata. The ipu7_bus_release() function frees adev->pdata when the device's reference count drops to zero. Two error paths incorrectly call kfree(pdata) after the device teardown has already freed it: 1. When ipu7_mmu_init() fails: put_device() is called, which drops the reference count to zero and triggers ipu7_bus_release() -> kfree(pdata). The subsequent kfree(pdata) is a double-free. 2. When ipu7_bus_add_device() fails: it calls auxiliary_device_uninit() internally, which calls put_device() -> ipu7_bus_release() -> kfree(pdata). The subsequent kfree(pdata) is again a double-free. Note that the kfree(pdata) when ipu7_bus_initialize_device() itself fails is correct, because in that case auxiliary_device_init() failed and the release function was never set up, so pdata must be freed manually. Additionally, the error code was not saved before calling put_device(), causing ERR_CAST() to dereference the already-freed adev pointer when constructing the return value. Fix this by saving the error from dev_err_probe() before put_device() and returning ERR_PTR() instead. Remove the redundant kfree(pdata) calls and fix the use-after-free in the return values of the two affected error paths. | ||||
| CVE-2026-64444 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in OnAssocRsp() IE loop The IE parsing loop in OnAssocRsp() advances by (pIE->length + 2) each iteration but only guards on i < pkt_len. When a malicious AP sends an AssocResponse whose last IE has only one byte remaining in the frame (the element_id byte lands at pkt_len-1), the loop reads pIE->length from pframe[pkt_len], which is one byte past the allocated receive buffer. Additionally, even when the header bytes are in bounds, pIE->length itself can extend the data window beyond pkt_len, silently passing a truncated IE to the handler functions. Add two guards at the top of the loop body: 1. Break if fewer than sizeof(*pIE) bytes remain (can't read header). 2. Break if the IE's declared data extends past pkt_len. | ||||
| CVE-2026-64441 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr() Three IE/attribute parsing functions have missing bounds checks. rtw_get_sec_ie() and rtw_get_wapi_ie() iterate over a raw IE buffer without verifying that the header bytes (tag + length) are within the remaining buffer before reading them. Additionally, rtw_get_sec_ie() compares the 4-byte WPA OUI at cnt+2 without checking that at least 6 bytes remain, and rtw_get_wapi_ie() compares a 4-byte WAPI OUI at cnt+6 without checking that at least 10 bytes remain. rtw_get_wps_attr() reads wps_ie[0] and wps_ie+2 unconditionally at entry, before verifying that wps_ielen is large enough to contain the 6-byte WPS IE header (element_id + length + 4-byte OUI). Inside the attribute loop, get_unaligned_be16() is called on attr_ptr and attr_ptr+2 without checking that 4 bytes remain in the buffer. Add a cnt+2 bounds check before each loop body in rtw_get_sec_ie() and rtw_get_wapi_ie(), guard each multi-byte comparison with a minimum IE length requirement, add a wps_ielen < 6 early return in rtw_get_wps_attr(), and add a 4-byte bounds check in its inner loop. | ||||
| CVE-2026-64437 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of a deferred file_lock on SMB2_CLOSE then SMB2_CANCEL Commit f580d27e8928 ("ksmbd: fix use-after-free of a deferred file_lock on double SMB2_CANCEL") made smb2_cancel() skip a work whose state is KSMBD_WORK_CANCELLED, so its cancel_fn cannot be fired a second time. But KSMBD_WORK has three states (ACTIVE, CANCELLED, CLOSED), and the same freeing producer path is reached for CLOSED too: SMB2_CLOSE on the locking handle -> set_close_state_blocked_works() sets the deferred work's state to KSMBD_WORK_CLOSED and wakes the smb2_lock() worker. The worker takes the non-ACTIVE early-exit, locks_free_lock()s the file_lock and, because the state is not KSMBD_WORK_CANCELLED, takes the STATUS_RANGE_NOT_LOCKED branch with "goto out2" -- which, like the cancelled branch, skips release_async_work(). The work stays on conn->async_requests with a live cancel_fn = smb2_remove_blocked_lock pointing at the freed file_lock. A subsequent SMB2_CANCEL for the same AsyncId then passes the KSMBD_WORK_CANCELLED-only guard (its state is KSMBD_WORK_CLOSED), so smb2_cancel() fires cancel_fn again over the freed file_lock -- the same use-after-free fixed, via SMB2_CLOSE instead of a first SMB2_CANCEL: BUG: KASAN: slab-use-after-free in __locks_delete_block __locks_delete_block locks_delete_block ksmbd_vfs_posix_lock_unblock smb2_remove_blocked_lock smb2_cancel <- 2nd SMB2_CANCEL fires cancel_fn handle_ksmbd_work Allocated by ...: locks_alloc_lock <- smb2_lock Freed by ...: locks_free_lock <- smb2_lock (non-ACTIVE early-exit) ... cache file_lock_cache of size 192 Reproduced on mainline 7.1-rc7 (which already contains f580d27e8928) with KASAN by an authenticated SMB client; the double-SMB2_CANCEL control is silent on that kernel, so the splat is attributable to the CLOSE trigger. Only an ACTIVE deferred work may have its cancel_fn fired: both terminal states (CANCELLED and CLOSED) reach the smb2_lock() early-exit that frees the file_lock and skips release_async_work(). Guard on KSMBD_WORK_ACTIVE so any non-active work is skipped. | ||||
| CVE-2026-64435 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: audit: Fix data races of skb_queue_len() readers on audit_queue Multiple readers access audit_queue.qlen via skb_queue_len() without holding the queue lock or using READ_ONCE(), while kauditd writes to this field via the skb_dequeue() → __skb_unlink() path with WRITE_ONCE() protected by a spinlock. This constitutes data races. All affected skb_queue_len(&audit_queue) call sites: - kauditd_thread() wait_event_freezable() condition - audit_receive_msg() AUDIT_GET handler (s.backlog assignment) - audit_receive() backlog check - audit_log_start() backlog check and pr_warn() KCSAN reports the following conflicting access pattern (one example): ================================================================== BUG: KCSAN: data-race in audit_log_start / skb_dequeue write (marked) to 0xffffffff8512ee20 of 4 bytes by task 661 on cpu 57: skb_dequeue+0x70/0xf0 kauditd_send_queue+0x71/0x220 kauditd_thread+0x1cb/0x430 kthread+0x1c2/0x210 ret_from_fork+0x162/0x1a0 ret_from_fork_asm+0x1a/0x30 read to 0xffffffff8512ee20 of 4 bytes by task 36586 on cpu 1: audit_log_start+0x2a0/0x6b0 audit_core_dumps+0x64/0xa0 do_coredump+0x14b/0x1260 get_signal+0xeb2/0xf70 arch_do_signal_or_restart+0x41/0x170 exit_to_user_mode_loop+0xa2/0x1c0 do_syscall_64+0x1a3/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0xe0 value changed: 0x00000001 -> 0x00000000 ================================================================== Resolve the race by switching to lockless helper skb_queue_len_lockless(), which internally uses READ_ONCE() and properly pairs with the WRITE_ONCE() write accesses already present on the writer side. [PM: line length tweak] | ||||
| CVE-2026-64418 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: shrinker: fix shrinker_info teardown race with expansion expand_shrinker_info() iterates all visible memcgs under shrinker_mutex, including memcgs that have not finished ->css_online() yet. Once pn->shrinker_info has been published, teardown must stay serialized with expand_shrinker_info() until that memcg is either fully online or no longer visible to iteration. Today alloc_shrinker_info() breaks that rule by dropping shrinker_mutex before freeing a partially initialized shrinker_info array, which may cause the following race: CPU0 CPU1 ==== ==== css_create --> list_add_tail_rcu(&css->sibling, &parent_css->children); online_css --> mem_cgroup_css_online --> alloc_shrinker_info --> alloc node0 info rcu_assign_pointer(C->node0->shrinker_info, old0) alloc node1 info -> FAIL -> goto err mutex_unlock(shrinker_mutex) shrinker_alloc() --> shrinker_memcg_alloc --> mutex_lock(shrinker_mutex) expand_shrinker_info --> mem_cgroup_iter see the memcg expand_one_shrinker_info --> old0 = C->node0->shrinker_info memcpy(new->unit, old0->unit, ...); free_shrinker_info --> kvfree(old0); /* double free !! */ kvfree_rcu(old0, rcu); The same problem exists later in mem_cgroup_css_online(). If alloc_shrinker_info() succeeds but a subsequent objcg allocation fails, the free_objcg -> free_shrinker_info() unwind path tears down the already published pn->shrinker_info arrays without shrinker_mutex. The expand_one_shrinker_info() can race with that teardown in the same way, leading to use-after-free or double-free of the old shrinker_info. Fix this by serializing shrinker_info teardown with shrinker_mutex, and by keeping alloc_shrinker_info() error cleanup inside the locked section. | ||||
| CVE-2026-64402 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer() When the SMB sink is used as a perf AUX sink, smb_update_buffer() calls smb_sync_perf_buffer() to copy hardware trace data into the perf AUX ring buffer pages. It derives pg_idx = head >> PAGE_SHIFT from @head, which is handle->head, and indexes dst_pages[pg_idx]. The pg_idx %= nr_pages normalization is only applied after the first loop iteration. This leaves the initial page index underived from the buffer size, which can result in an out-of-bounds write past dst_pages[] when head exceeds the AUX buffer size. Normalize head modulo the AUX buffer size before deriving the page index and offset, mirroring tmc_etr_sync_perf_buffer(). | ||||
| CVE-2026-64395 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: require source read access for duplicate extents FSCTL_DUPLICATE_EXTENTS_TO_FILE passes the source file directly to vfs_clone_file_range() or vfs_copy_file_range() without checking the SMB access mask granted to the source handle. A handle opened with attribute access can consequently be used to copy file contents into an attacker-readable destination. Require FILE_READ_DATA on the source handle before either VFS operation, matching other ksmbd data-copy paths. | ||||
| CVE-2026-64379 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: mask server-provided mode to 07777 in modefromsid When modefromsid is active, parse_dacl() applies the server-provided sub_auth[2] value from the NFS mode SID to cf_mode without masking to 07777. Apply the correct masking, same as in the read path. | ||||
| CVE-2026-64367 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: hid-goodix-spi: validate report size to prevent stack buffer overflow goodix_hid_set_raw_report() builds a protocol frame in a 128-byte stack buffer (tmp_buf), writing an 11-12 byte header followed by the caller-supplied report data. The HID core caps report size at HID_MAX_BUFFER_SIZE (16384) by default, while the driver does not set hid_ll_driver.max_buffer_size and performs no bounds checking before copying the payload: memcpy(tmp_buf + tx_len, buf, len); A hidraw SET_REPORT ioctl with a report larger than ~116 bytes overflows the stack buffer. Add a size check after constructing the header, rejecting reports that would exceed the buffer capacity. Discovered by Atuin - Automated Vulnerability Discovery Engine. | ||||
| CVE-2026-64318 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: partitions: aix: bound the pp_count scan to the ppe array aix_partition() reads the physical volume descriptor into a fixed-size struct pvd and then scans its physical-partition-extent array: int numpps = be16_to_cpu(pvd->pp_count); ... for (i = 0; i < numpps; i += 1) { struct ppe *p = pvd->ppe + i; ... lp_ix = be16_to_cpu(p->lp_ix); pvd points at a single kmalloc()'d struct pvd whose ppe[] member holds a fixed ARRAY_SIZE(pvd->ppe) (1016) entries, but the loop runs up to the on-disk pp_count. pp_count is an unvalidated __be16 read straight from the descriptor, so a crafted AIX image with pp_count larger than 1016 drives the loop to read pvd->ppe[i] past the end of the allocation (up to 65535 entries, ~2 MB out of bounds). The partition scan runs without mounting anything, when a block device with a crafted AIX/IBM partition table appears (an attacker-supplied image attached with losetup -P, or a device auto-scanned by udev), via msdos_partition() -> aix_partition(). Clamp the scan to the number of entries the ppe[] array can hold. | ||||
| CVE-2026-64296 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: exfat: bound uniname advance in exfat_find_dir_entry() In exfat_find_dir_entry(), each TYPE_EXTEND (file name) entry advances the output pointer by a fixed amount while the loop guard only tracks the accumulated name length: if (++order == 2) uniname = p_uniname->name; else uniname += EXFAT_FILE_NAME_LEN; len = exfat_extract_uni_name(ep, entry_uniname); name_len += len; unichar = *(uniname+len); *(uniname+len) = 0x0; uniname grows by EXFAT_FILE_NAME_LEN (15) per name entry, but name_len grows only by the actual extracted length, which is shorter when a name fragment contains an early NUL. The only guard is `name_len >= MAX_NAME_LENGTH`, so a crafted directory with many short name fragments lets uniname run far past the p_uniname->name[MAX_NAME_LENGTH + 3] buffer while name_len stays small, causing an out-of-bounds read and write at *(uniname+len). The sibling extractor exfat_get_uniname_from_ext_entry() already stops on a short fragment (the lockstep `len != EXFAT_FILE_NAME_LEN` guard added in commit d42334578eba ("exfat: check if filename entries exceeds max filename length")); exfat_find_dir_entry() never got the equivalent. Track the per-entry write offset as a count and reject a fragment once the offset, or the offset plus the extracted length, would exceed MAX_NAME_LENGTH, before forming the output pointer. | ||||
| CVE-2026-64293 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Use sizeof(*hdr) instead of sizeof(hdr) in veventq read The bound-check in iommufd_veventq_fops_read() for the normal vEVENT path uses sizeof(hdr) where the surrounding code uses sizeof(*hdr): if (!vevent_for_lost_events_header(cur) && sizeof(hdr) + cur->data_len > count - done) { hdr is declared as struct iommufd_vevent_header *, so sizeof(hdr) evaluates to the size of the pointer. Surrounding code uses sizeof(*hdr) consistently: if (done >= count || sizeof(*hdr) > count - done) { ... if (copy_to_user(buf + done, hdr, sizeof(*hdr))) { ... done += sizeof(*hdr); struct iommufd_vevent_header is currently 8 bytes (two __u32 fields, flags and sequence), so on 64-bit (sizeof(void *) == 8) the two expressions happen to be equal and the check works as intended. On 32-bit (sizeof(void *) == 4) the check under-counts the header by 4 bytes: a vEVENT whose data_len causes 8 + cur->data_len to exceed count - done while 4 + cur->data_len does not will pass the check, then the loop will copy_to_user 8 bytes of header followed by data_len bytes of payload, writing past the user-supplied buffer. It is also a latent bug for any future expansion of struct iommufd_vevent_header beyond sizeof(void *) on 64-bit; the check should not depend on the type happening to match the host pointer width. Use sizeof(*hdr) to match the rest of the function and the actual amount that will be copied. | ||||
| CVE-2026-64281 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: wake sq waiters when the transport closes Threads parked in svc_rdma_sq_wait() on sc_sq_ticket_wait or sc_send_wait can hang indefinitely in TASK_UNINTERRUPTIBLE state across transport teardown, pinning svc_xprt references and blocking svc_rdma_free(). The close path sets XPT_CLOSE before invoking xpo_detach and both wait_event predicates include an XPT_CLOSE term, but the predicates are re-evaluated only on wakeup. sc_sq_ticket_wait has no completion-driven wake path; it is advanced solely by the chained ticket handoff inside svc_rdma_sq_wait() itself. Without an explicit wake at close, parked threads never observe XPT_CLOSE, hold their svc_xprt_get reference forever, and svc_rdma_free() blocks on xpt_ref dropping to zero. Two close entry points reach this transport. Local teardown runs svc_rdma_detach() from svc_handle_xprt() -> svc_delete_xprt() -> xpo_detach() on a worker thread. A remote disconnect arrives at svc_rdma_cma_handler(), which calls svc_xprt_deferred_close(): that sets XPT_CLOSE and enqueues the transport but does not access either RDMA waitqueue, so a worker already parked in svc_rdma_sq_wait() never re-evaluates its predicate. With every worker parked on this transport, no thread is available to run the local teardown either, and the wake site there is unreachable. Introduce svc_rdma_xprt_deferred_close(), a thin svcrdma wrapper that calls svc_xprt_deferred_close() and then wakes both sc_sq_ticket_wait and sc_send_wait. Convert the svcrdma producers that called svc_xprt_deferred_close() directly: svc_rdma_cma_handler(), qp_event_handler(), svc_rdma_post_send_err(), svc_rdma_wc_send(), the sendto drop path, the rw completion error paths, and the recvfrom flush and read-list error paths. Wake both waitqueues from svc_rdma_detach() as well. The synchronous svc_xprt_close() path (backchannel ENOTCONN, device removal via svc_rdma_xprt_done) reaches detach without flowing through svc_xprt_deferred_close() and therefore does not invoke the new helper. [ cel: add svc_rdma_xprt_deferred_close() to complete the fix ] | ||||
| CVE-2026-64276 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count rmi_f30_map_gpios() allocates gpioled_key_map with min(gpioled_count, TRACKSTICK_RANGE_END) == at most 6 entries, but rmi_f30_attention() iterates the full f30->gpioled_count (device query register, range 0..31) and dereferences gpioled_key_map[i], and input->keycodemax is set to the full gpioled_count while input->keycode points at the 6-entry allocation. A device that reports gpioled_count > 6 with GPIO support enabled therefore causes an out-of-bounds read on the attention interrupt and out-of-bounds read/write through the EVIOCGKEYCODE/EVIOCSKEYCODE ioctls, which bound the index only against keycodemax. This is the same defect as the F3A handler, which was copied from F30. Size the keymap for the full gpioled_count; the mapping loop still assigns only the first min(gpioled_count, TRACKSTICK_RANGE_END) entries. | ||||
| CVE-2026-64260 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse-uring: Avoid queue->stopped races and set/read that value under lock There are several readers of queue->stopped that check the value under lock, but fuse_uring_commit_fetch() did not and actually the value was not set under the lock in fuse_uring_abort_end_requests() either. Especially in fuse_uring_commit_fetch it is important to check under a lock, because due to races 'struct fuse_req' might be freed with fuse_request_end, but another thread/cpu might already do teardown work. | ||||