Export limit exceeded: 377274 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 377274 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 377274 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 377274 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (377274 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68415 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: clear mode callbacks after failed mode setup xfrm_state_gc_task can run long after a failed IPTFS state setup. In the reproduced case, __xfrm_init_state() cached x->mode_cbs, IPTFS setup returned -ENOMEM before publishing mode_data, and the temporary module reference from xfrm_get_mode_cbs() was dropped immediately. The dead state then kept x->mode_cbs until deferred GC ran after xfrm_iptfs had been unloaded. Clear x->mode_cbs when mode init or clone fails before publishing mode_data. Those states never installed mode-specific state or the long-term IPTFS module pin, so deferred GC has nothing mode-specific to destroy and must not retain a callback table pointer past the temporary lookup reference. The buggy scenario involves two paths, with each column showing the order within that path: failed setup path: 1. cache x->mode_cbs 2. mode setup fails before mode_data 3. drop the temporary module ref 4. dead state keeps x->mode_cbs cached GC/unload path: 1. xfrm_state_put() queues GC work 2. xfrm_iptfs unloads later 3. xfrm_state_gc_task runs 4. GC dereferences stale x->mode_cbs This also covers the failed clone path where clone_state() returns before publishing mode_data. Validation reproduced this kernel report: Kernel panic - not syncing: Fatal exception CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y failslab_stacktrace_filter matched xfrm_iptfs frames ack_error=-12 FAULT_INJECTION: forcing a failure BUG: unable to handle page fault Workqueue: events xfrm_state_gc_task RIP: xfrm_state_gc_task+0x142/0x650 Modules linked in: esp4_offload xfrm_user [last unloaded: xfrm_iptfs] Kernel panic - not syncing: Fatal exception | ||||
| CVE-2026-68425 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: IB/mad: Drop unmatched RMPP responses before reassembly Kernel-handled RMPP receive processing starts reassembly for active DATA responses before the response is matched to an outstanding send. The normal match happens later, after ib_process_rmpp_recv_wc() has either assembled a complete message or consumed the segment. That ordering lets an unsolicited response that routes to a kernel RMPP agent by the high TID bits allocate or extend RMPP receive state before the full TID and source address are checked against a real request. A reordered burst can therefore reach the receive-side insertion path even though the response would not match any send. For kernel-handled RMPP DATA responses, require the existing ib_find_send_mad() match before entering RMPP reassembly. The matcher already checks the full TID, management class and source address/GID against the agent wait, backlog and in-flight send lists. If there is no match, drop the response without creating RMPP state. This leaves the RMPP window behavior unchanged and only rejects responses that have no corresponding request. | ||||
| CVE-2026-68432 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: require CAP_NET_ADMIN in the device netns for changelink A tunnel changelink() operates on at most two netns, dev_net(dev) and the sticky underlay netns vxlan->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in vxlan->net can rewrite a vxlan device whose underlay lives in vxlan->net. vxlan_changelink() validates and applies the new configuration against vxlan->net (vxlan_config_validate(vxlan->net, ...)) and can reopen the underlay socket in that netns, so the same reasoning as the tunnel changelink series applies here. Gate vxlan_changelink() with rtnl_dev_link_net_capable(), at the top of the op before any attribute is parsed, matching ipgre_changelink() and the rest of the "require CAP_NET_ADMIN in the device netns for changelink" series. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-65400 | 1 Apple | 1 Macos | 2026-08-14 | 7.1 High |
| An authentication issue was addressed with improved state management. This issue is fixed in macOS Sequoia 15.7.9, macOS Sonoma 14.8.9, macOS Tahoe 26.6.1. An attacker on the network may be able to authenticate to Screen Sharing without valid credentials. | ||||
| CVE-2026-56858 | 1 Go Standard Library | 1 Html/template | 2026-08-14 | N/A |
| Previously, pathological inputs could close an unescaped '/' early, allowing for attack-controlled data to inject arbitrary content, potentially leading to XSS. | ||||
| CVE-2026-19767 | 1 Itsourcecode | 1 Hospital Management System | 2026-08-14 | 6.3 Medium |
| A weakness has been identified in itsourcecode Hospital Management System 1.0. This issue affects some unknown processing of the file viewdoctortimings.php. Executing a manipulation of the argument delid can lead to sql injection. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. | ||||
| CVE-2026-19765 | 1 Eyaushev | 1 Swagger-testcase-mcp | 2026-08-14 | 6.3 Medium |
| A security flaw has been discovered in eyaushev swagger-testcase-mcp 5babb27c951fb404bc2b25ec80593616e49054e5. This vulnerability affects the function loadSource of the file src/utils/swagger-parser.ts of the component fetch_swagger. Performing a manipulation results in server-side request forgery. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-68290 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rds: tcp: unregister sysctl before tearing down listen socket rds_tcp_exit_net() frees the per-netns RDS TCP listen socket via rds_tcp_kill_sock() before unregistering the per-netns sysctl table. Since rds_tcp_skbuf_handler() derives the netns from rtn->rds_tcp_listen_sock->sk, a concurrent sysctl write can race with netns teardown and dereference the freed socket/sk. KASAN reports the race as: BUG: KASAN: slab-use-after-free in rds_tcp_skbuf_handler+0x2aa/0x2e0 rds_tcp_skbuf_handler net/rds/tcp.c:721 proc_sys_call_handler fs/proc/proc_sysctl.c vfs_write fs/read_write.c __x64_sys_pwrite64 fs/read_write.c Fix this by unregistering the RDS TCP sysctl table before calling rds_tcp_kill_sock(). unregister_net_sysctl_table() prevents new sysctl handlers from starting and waits for in-flight handlers to finish, so the listen socket can then be released safely. The fix was tested against the linked reproducer. | ||||
| CVE-2026-68293 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix MCIA register buffer overflow on 32 dword reads The MCIA register can return up to 32 dwords (128 bytes) when the device advertises the mcia_32dwords capability, but struct mlx5_ifc_mcia_reg_bits only defines dword_0..11, leaving room for just 12 dwords (48 bytes) of data. mlx5_query_mcia() clamps the read size to mlx5_mcia_max_bytes() and then memcpy()s that many bytes out of the register, potentially reading past the end of the 'out' buffer. On kernels built with FORTIFY_SOURCE this is caught as a buffer overflow while reading the module EEPROM via ethtool: detected buffer overflow in memcpy kernel BUG at lib/string_helpers.c:1048! RIP: 0010:fortify_panic+0x13/0x20 Call Trace: mlx5_query_mcia.isra.0+0x200/0x210 [mlx5_core] mlx5_query_module_eeprom_by_page+0x4a/0xa0 [mlx5_core] mlx5e_get_module_eeprom_by_page+0xbb/0x120 [mlx5_core] eeprom_prepare_data+0xf3/0x170 ethnl_default_doit+0xf1/0x3b0 Extend the mcia_reg layout to 32 dwords. | ||||
| CVE-2026-19764 | 1 Raisecom | 1 Communication Command And Dispatch Management Platform | 2026-08-14 | 7.3 High |
| A vulnerability was identified in Raisecom Communication Command and Dispatch Management Platform up to 7.6.5. This affects an unknown part of the file /app/users/getpwd.php. Such manipulation of the argument sip leads to sql injection. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-7210 | 1 Python | 2 Cpython, Python | 2026-08-14 | 7.5 High |
| `xml.parsers.expat` and `xml.etree.ElementTree` use insufficient entropy for Expat hash-flooding protection, which allows a crafted XML document to trigger hash flooding.\r\n\r\nFully mitigating this vulnerability requires both updating libexpat to 2.8.0 or later and applying this patch. | ||||
| CVE-2026-59692 | 2 Gstreamer, Redhat | 9 Gstreamer, Enterprise Linux, Enterprise Linux Eus and 6 more | 2026-08-14 | 7.5 High |
| A stack buffer overflow vulnerability was found in GStreamer's DTLS plugin. During a DTLS handshake, the peer certificate Subject Distinguished Name is printed into a fixed-size 2048-byte stack buffer without bounds checking. A remote unauthenticated attacker can send a certificate with an oversized Subject DN that exceeds the buffer, causing a stack buffer overflow and process crash, resulting in denial of service. | ||||
| CVE-2026-59691 | 2 Gstreamer, Redhat | 9 Gstreamer, Enterprise Linux, Enterprise Linux Eus and 6 more | 2026-08-14 | 7.1 High |
| A heap buffer overflow vulnerability was found in GStreamer's rfbsrc plugin. When a client connects to a malicious RFB/VNC server that advertises a 16bpp framebuffer and sends Hextile-encoded updates, the Hextile background fill path writes 32-bit pixel values into a buffer allocated for 16-bit pixels. This type mismatch causes an out-of-bounds heap write that can lead to denial of service (process crash) and potential memory corruption. | ||||
| CVE-2026-19763 | 1 Dtstack | 1 Taier | 2026-08-14 | 3.8 Low |
| A vulnerability was determined in DTStack Taier 1.4.0. Affected by this issue is the function FileUtils.deleteDirectory of the file ClusterController.java of the component Cluster Creation. This manipulation of the argument clusterName causes path traversal. Remote exploitation of the attack is possible. Upgrading to version 1.5.0 can resolve this issue. Patch name: ec8c59c76aceb04ab3080543ab2d9c6a4b674729. The affected component should be upgraded. | ||||
| CVE-2026-56862 | 1 Go Standard Library | 1 Crypto Tls | 2026-08-14 | N/A |
| Handshake messages, such as KeyUpdate, are always considered as state-advancing, regardless of whether a handshake has been completed or not. As a result, a malicious client can keep sending KeyUpdate messages to force the server to keep performing key derivation operations indefinitely. | ||||
| CVE-2026-56860 | 1 Go Standard Library | 1 Net/url | 2026-08-14 | N/A |
| Previously, resolving relative paths containing parent directory ('..') segments performed string conversions and buffer rewrites on each step, resulting in quadratic time complexity and high memory allocation overhead. Now, path resolution operates on a byte buffer using index-based backtracking for '..' segments, eliminating the quadratic time complexity and significantly reducing memory allocations. | ||||
| CVE-2026-72840 | 1 Openwrt | 1 Luci | 2026-08-14 | 8.8 High |
| OpenWrt LuCI contains an overly permissive ACL definition in luci-mod-system-mounts that grants write access to /etc/crontabs/root to users intended only for mount configuration. Authenticated users with only the mount-configuration ACL group can append arbitrary cron entries via ubus file.write, which the default busybox crond daemon executes as root within one minute. | ||||
| CVE-2026-72841 | 1 Openwrt | 1 Luci | 2026-08-14 | 9.9 Critical |
| luci-app-openvpn fails to properly validate the instance_name2 parameter during file upload, allowing authenticated users to perform path traversal and write arbitrary files outside the intended directory. Attackers can upload malicious payloads to gain persistent root code execution by placing SSH keys in system directories accessible on reboot. | ||||
| CVE-2026-73489 | 1 Eugeny | 1 Russh | 2026-08-14 | 4.3 Medium |
| Russh is a Rust SSH client & server library. Prior to 0.62.4, an authenticated SSH client can cause a denial of service by sending a pty-req channel request with more than 130 terminal-mode records. The parser in russh/src/server/encrypted.rs stores terminal modes in a fixed 130-entry [(Pty::TTY_OP_END, 0); 130] array but continues increasing the mode count, then constructs an out-of-bounds slice and panics before the application pty_request handler runs. The panic terminates the server session task without causing memory corruption. This issue is fixed in version 0.62.4. | ||||
| CVE-2026-19762 | 1 Dtstack | 1 Taier | 2026-08-14 | 7.3 High |
| A vulnerability was found in DTStack Taier 1.4.0. Affected by this vulnerability is the function Paths.ge of the file FileChunkController.java of the component Chunk-Check Endpoint. The manipulation of the argument Name results in path traversal. The attack may be launched remotely. The exploit has been made public and could be used. | ||||