Export limit exceeded: 381752 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (381752 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74443 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: bound DMA command body size against suffix pointer vmw_cmd_dma() locates the DMA suffix at (unsigned long) &cmd->body + header->size - sizeof(*suffix) without checking that header->size is large enough to contain both cmd->body and the suffix. An undersized header makes the suffix pointer underflow back into the previous command in the bounce buffer. The verifier later writes suffix->maximumOffset, clobbering verified fields of an already-relocated earlier command -- a TOCTOU on the device-visible command stream that lets one command rewrite another's GMR id, surface id, or other authenticated fields. Reject the command if the body is too small for the suffix to fit. | ||||
| CVE-2026-74454 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Supply the overflow slot size in BPOS, not the whole bin BO size vc4_overflow_mem_work() points BPOA at a 512KB slot inside the 16MB binner BO, but writes the size of the whole BO to BPOS. On every binner out-of-memory event the PTB is therefore authorized to write tile lists across all the other slots (which may hold the tile state, tile alloc and overflow memory of in-flight jobs) and, for any slot but the first, past the end of the binner BO into unrelated CMA memory. Since CMA pages are recycled into page cache and user allocations, this is arbitrary memory corruption by GPU DMA. In practice it shows up as GPU hangs with corrupted control list pointers, userspace heap corruption, a GPU that stays permanently wedged after the first hang, and occasional full system crashes, whenever a job overflows the initial binner slot. The bug dates back to the conversion from a dedicated overflow BO (where writing the full BO size was correct) to the slotted binner BO. | ||||
| CVE-2026-74467 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/qeth: Check CAP_NET_ADMIN for private ioctls Gate the SIOCDEVPRIVATE ioctl commands SIOC_QETH_ADP_SET_SNMP_CONTROL, SIOC_QETH_GET_CARD_TYPE and SIOC_QETH_QUERY_OAT with CAP_NET_ADMIN capable check to ensure unprivileged users cannot invoke them. | ||||
| CVE-2026-69235 | 1 Esri | 1 Portal For Arcgis | 2026-08-21 | 6.1 Medium |
| There is a stored cross site scripting issue in Esri Portal for ArcGIS versions 11.5 and prior that may allow a remote, privileged attacker to inject malicious code that could potentially execute arbitrary in a victim’s browser. Users working with ArcGIS Enterprise 11.1, 11.3, and 11.5 are encouraged to patch. All users are advised to upgrade to the latest long-term support release. | ||||
| CVE-2026-69233 | 1 Esri | 1 Portal For Arcgis | 2026-08-21 | 5.5 Medium |
| There is a stored cross site scripting issue in Esri Portal for ArcGIS versions 11.5 and prior that may allow a remote, administratively privileged attacker to inject malicious code that could potentially execute arbitrary in a victim’s browser. Users working with ArcGIS Enterprise 11.1, 11.3, and 11.5 are encouraged to patch. All users are advised to upgrade to the latest long-term support release. | ||||
| CVE-2026-53468 | 1 Typemill | 1 Typemill | 2026-08-21 | 4.6 Medium |
| Typemill is a flat-file, Markdown-based content management system designed for informational documentation websites. Versions prior to 2.23.0 are vulnerable to stored HTML attribute injection in the page metadata fields (`og:title` and `og:description`). An authenticated user with permission to modify page metadata can inject arbitrary HTML attributes into generated `<meta>` tags due to missing output encoding. Under certain browser or DOM interaction scenarios, this may lead to stored cross-site scripting (XSS). Version 2.23.0 fixes the issue. | ||||
| CVE-2026-74507 | 1 Linux | 1 Linux Kernel | 2026-08-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HIDP: validate numbered report payloads When hidp_get_raw_report() waits for a numbered report, hidp_process_data() compares the expected report number with skb->data[0]. A connected HIDP peer can reply with only a DATA transaction header, leaving the skb empty after the header is removed. KMSAN reports an uninitialized-value use in hidp_session_run(), with the value originating in __alloc_skb() through vhci_write(). The transaction header checks remove the empty-frame reports, but this report remains until the payload check is added. The comparison can also consume a peer-controlled byte beyond the declared L2CAP PDU. A DATA | FEATURE response followed by an extra 0x01 byte made the current code accept that byte as report ID 1 and complete HIDIOCGFEATURE with a zero-byte result. With this change the malformed response is rejected with -EIO, while a subsequent valid response still succeeds. Require a payload byte before comparing a numbered report ID. Unnumbered reports continue to accept an empty payload. | ||||
| CVE-2021-43716 | 2026-08-21 | 9.8 Critical | ||
| Verification Bypass vulnerability exists in EPSON 150075647YWWV110 EasyMP Network Updater Ver.1.20. The Epson projector can be updated by encrypted firmware through USB. | ||||
| CVE-2021-43717 | 1 Epson | 1 Iprojection | 2026-08-21 | 9.8 Critical |
| An issue exists in pson EH-TW5350 Epson iProjection.apk v3.2.6. If you identify a projector equipped with an iProjection function, you can access the projector using hard-coded authentication information and control the projector maliciously. | ||||
| CVE-2026-49360 | 2026-08-21 | N/A | ||
| Recce is a data-validation toolkit for enhanced dbt (data build tool) PR review. Prior to version 1.50.0, OSS server deployments that expose the server to an untrusted network without authentication are vulnerable to unauthenticated SQL execution through the query run API. When Recce is configured with a DuckDB-backed project, an attacker can use DuckDB filesystem primitives to read and write files accessible to the Recce server process. The impact depends on how Recce is deployed, but may include disclosure of local files, tampering with Recce/dbt artifacts, modification of browser-served static files leading to stored XSS, and modification of application files if those paths are writable. If Recce is run as root, file access occurs with root privileges inside that host or container. This issue has been patched in Recce `v1.50.0`. Users should upgrade to Recce `v1.50.0` or later. The patch restricts unsafe file read/write behavior for DuckDB-backed query execution and hardens the affected query path. Other warehouse adapters have also been reviewed for similar exposure. Users who cannot upgrade immediately should avoid exposing `recce server` to the public internet or any untrusted network. Recommended mitigations include enabling authentication or placing Recce behind an authenticated reverse proxy/VPN, running Recce as a non-root user, using a read-only application filesystem where possible, and ensuring that sensitive files or credentials are not available to the Recce process. | ||||
| CVE-2026-73323 | 2026-08-21 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-48106 | 2026-08-21 | N/A | ||
| Arc is an open, SQL-native time-series database for telemetry. Prior to version 26.06.1, Arc Enterprise's cluster replication receiver at `internal/cluster/replication/receiver.go` validates only the wire-format envelope (length, opcode) of inbound messages. The `MsgReplicateSync` payload itself is accepted without any application-layer authentication — no HMAC, no signature, no per-message nonce. The replication stream is protected at the transport layer by TLS / mTLS, but there is no protection against application-layer message tampering or replay once a peer is on the cluster network. This is fixed in 2026.06.1. Some workarounds are available. Restrict cluster network access to known-trusted peers via strict firewall rules, audit replication logs for unexpected `MsgReplicateSync` traffic, and/or disable cluster mode until the fix is available. | ||||
| CVE-2026-48105 | 2026-08-21 | N/A | ||
| Arc is an open, SQL-native time-series database for telemetry. Prior to version 26.06.1, Arc Enterprise's Raft FSM (`internal/cluster/raft/fsm.go:applyRegisterFile`) accepts attacker-chosen file paths in manifest-registration proposals without validating them against the configured storage backend. The only check is that the path is non-empty. There is no parent-traversal (`..`) rejection, no allowlist of legitimate prefixes, no scheme restriction (`s3://` vs local), and no length bound. This is fixed in 2026.06.1. Some workarounds are available. Restrict cluster network access to known-trusted peers via strict firewall rules, audit the cluster manifest for unexpected paths (any path not matching the configured storage backend root is suspect), and/or disable cluster mode until the fix is available. | ||||
| CVE-2026-77414 | 1 Jsonata-js | 1 Jsonata | 2026-08-21 | N/A |
| JSONata is a JSON query and transformation language. Prior to 1.8.8 and 2.2.1, the src/jsonata.js environment.lookup function used a bypassable hasOwnProperty check. Crafted expressions could use $hasOwnProperty, $spread, $string, prototype access, and $constructor to reach the object prototype and invoke process.getBuiltinModule with child_process, executing arbitrary code with the privileges of the host process. This issue is fixed in versions 1.8.8 and 2.2.1. | ||||
| CVE-2026-69237 | 1 Esri | 1 Portal For Arcgis | 2026-08-21 | 3.8 Low |
| There is an HTML injection vulnerability in Esri Portal for ArcGIS versions 11.3 and prior that allows a remote attacker with administrative privileges to insert arbitrary HTML into an administrative API. Users working with ArcGIS Enterprise 11.1, and 11.3 are encouraged to patch. All users are advised to upgrade to the latest long-term support release. | ||||
| CVE-2026-69236 | 1 Esri | 1 Portal For Arcgis | 2026-08-21 | 6.1 Medium |
| There is a stored cross site scripting issue in Esri Portal for ArcGIS versions 12.1 and prior that may allow a remote, privileged attacker to inject malicious code that could potentially execute arbitrary JavaScript in a victim’s browser. Users working with ArcGIS Enterprise 11.1, 11.3, 11.5, 12.0 or 12.1 are encouraged to patch. All users are advised to upgrade to the latest long-term support release and apply the patch. | ||||
| CVE-2026-69234 | 1 Esri | 1 Portal For Arcgis | 2026-08-21 | 6.1 Medium |
| There is a reflected cross site scripting vulnerability in Esri Portal for ArcGIS versions 11.5 and prior which may allow a remote, unauthenticated attacker to create a crafted link which when clicked could potentially execute arbitrary JavaScript code in the victim’s browser. Users working with ArcGIS Enterprise 11.1, 11.3, and 11.5 are encouraged to patch. All users are advised to upgrade to the latest long-term support release. Users working with ArcGIS Web App Builder developer edition are advised to migrate to ArcGIS Experience Builder, as ArcGIS Web App Builder developer edition is unsupported when this CVE is assigned. | ||||
| CVE-2026-77415 | 1 Jsonata-js | 1 Jsonata | 2026-08-21 | N/A |
| JSONata is a JSON query and transformation language. Prior to 1.8.8 and 2.2.1, crafted JSONata expressions could chain several object-integrity weaknesses to execute arbitrary code. The chain could overwrite $clone to mutate objects through evaluateTransformExpression, expose and deconstruct JSONata functions or lambdas through $merge.*, replace proc.arguments.forEach used by applyProcedure, and forge internal lambda state. These primitives allowed an attacker to reach prototype getters, prototype and constructor access, and process.getBuiltinModule with child_process, executing code with the privileges of the host process. This issue is fixed in versions 1.8.8 and 2.2.1. | ||||
| CVE-2026-53509 | 1 Ondata | 1 Ckan-mcp-server | 2026-08-21 | 5.7 Medium |
| CKAN MCP Server is a tool for querying CKAN open data portals. A known vulnerability CVE-2026-33060 indicated tools including ckan_package_search and sparql_query that accept a base_url parameter had the risk of making HTTP requests to arbitrary endpoints without restriction. A fix was applied to filter out ip addresses. However, a method to bypass exists prior to version 0.4.106. CKAN MCP Server validates caller-supplied CKAN server URLs by inspecting only the parsed hostname string before issuing outbound HTTP requests. In `src/utils/http.ts`, hostname aliases such as `ip6-localhost` are not equal to `localhost`, are not dotted IPv4 literals, and are not bracketed IPv6 literals, so they pass the SSRF filter but can resolve to loopback when the server performs the request. A remote MCP caller that can invoke CKAN tools with a `server_url` can therefore make the server connect to local or private addresses and, for CKAN-shaped responses, receive response-derived data. The updated fix in version 0.4.106 replaced the single `hostname === 'localhost'` check with a blocked-hostname `Set` covering `ip6-localhost` and `ip6-loopback`. | ||||
| CVE-2026-76905 | 1 Getkin | 1 Kin-openapi | 2026-08-21 | 7.5 High |
| kin-openapi is a Go project for handling OpenAPI files. From 0.10.0 until 0.141.0, openapi3filter.convertParseError in openapi3filter/validation_error_encoder.go dereferences e.Parameter.In without checking whether e.Parameter is nil. A malformed non-string scalar field in a multipart/form-data request body produces a nested ParseError with a nil RequestError.Parameter, and applications that render the validation error through openapi3filter.ConvertErrors or ValidationErrorEncoder panic. An unauthenticated client can repeatedly send such requests to deny service when the application lacks a recovery boundary. JSON request bodies and applications that do not use these error-rendering helpers are not affected. This issue is fixed in version 0.141.0. | ||||