Export limit exceeded: 19589 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (19589 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50583 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid0, raid10: Don't set discard sectors for request queue It should use disk_stack_limits to get a proper max_discard_sectors rather than setting a value by stack drivers. And there is a bug. If all member disks are rotational devices, raid0/raid10 set max_discard_sectors. So the member devices are not ssd/nvme, but raid0/raid10 export the wrong value. It reports warning messages in function __blkdev_issue_discard when mkfs.xfs like this: [ 4616.022599] ------------[ cut here ]------------ [ 4616.027779] WARNING: CPU: 4 PID: 99634 at block/blk-lib.c:50 __blkdev_issue_discard+0x16a/0x1a0 [ 4616.140663] RIP: 0010:__blkdev_issue_discard+0x16a/0x1a0 [ 4616.146601] Code: 24 4c 89 20 31 c0 e9 fe fe ff ff c1 e8 09 8d 48 ff 4c 89 f0 4c 09 e8 48 85 c1 0f 84 55 ff ff ff b8 ea ff ff ff e9 df fe ff ff <0f> 0b 48 8d 74 24 08 e8 ea d6 00 00 48 c7 c6 20 1e 89 ab 48 c7 c7 [ 4616.167567] RSP: 0018:ffffaab88cbffca8 EFLAGS: 00010246 [ 4616.173406] RAX: ffff9ba1f9e44678 RBX: 0000000000000000 RCX: ffff9ba1c9792080 [ 4616.181376] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9ba1c9792080 [ 4616.189345] RBP: 0000000000000cc0 R08: ffffaab88cbffd10 R09: 0000000000000000 [ 4616.197317] R10: 0000000000000012 R11: 0000000000000000 R12: 0000000000000000 [ 4616.205288] R13: 0000000000400000 R14: 0000000000000cc0 R15: ffff9ba1c9792080 [ 4616.213259] FS: 00007f9a5534e980(0000) GS:ffff9ba1b7c80000(0000) knlGS:0000000000000000 [ 4616.222298] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4616.228719] CR2: 000055a390a4c518 CR3: 0000000123e40006 CR4: 00000000001706e0 [ 4616.236689] Call Trace: [ 4616.239428] blkdev_issue_discard+0x52/0xb0 [ 4616.244108] blkdev_common_ioctl+0x43c/0xa00 [ 4616.248883] blkdev_ioctl+0x116/0x280 [ 4616.252977] __x64_sys_ioctl+0x8a/0xc0 [ 4616.257163] do_syscall_64+0x5c/0x90 [ 4616.261164] ? handle_mm_fault+0xc5/0x2a0 [ 4616.265652] ? do_user_addr_fault+0x1d8/0x690 [ 4616.270527] ? do_syscall_64+0x69/0x90 [ 4616.274717] ? exc_page_fault+0x62/0x150 [ 4616.279097] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 4616.284748] RIP: 0033:0x7f9a55398c6b | ||||
| CVE-2023-54052 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix skb leak by txs missing in AMSDU txs may be dropped if the frame is aggregated in AMSDU. When the problem shows up, some SKBs would be hold in driver to cause network stopped temporarily. Even if the problem can be recovered by txs timeout handling, mt7921 still need to disable txs in AMSDU to avoid this issue. | ||||
| CVE-2025-68751 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/fpu: Fix false-positive kmsan report in fpu_vstl() A false-positive kmsan report is detected when running ping command. An inline assembly instruction 'vstl' can write varied amount of bytes depending on value of 'index' argument. If 'index' > 0, 'vstl' writes at least 2 bytes. clang generates kmsan write helper call depending on inline assembly constraints. Constraints are evaluated compile-time, but value of 'index' argument is known only at runtime. clang currently generates call to __msan_instrument_asm_store with 1 byte as size. Manually call kmsan function to indicate correct amount of bytes written and fix false-positive report. This change fixes following kmsan reports: [ 36.563119] ===================================================== [ 36.563594] BUG: KMSAN: uninit-value in virtqueue_add+0x35c6/0x7c70 [ 36.563852] virtqueue_add+0x35c6/0x7c70 [ 36.564016] virtqueue_add_outbuf+0xa0/0xb0 [ 36.564266] start_xmit+0x288c/0x4a20 [ 36.564460] dev_hard_start_xmit+0x302/0x900 [ 36.564649] sch_direct_xmit+0x340/0xea0 [ 36.564894] __dev_queue_xmit+0x2e94/0x59b0 [ 36.565058] neigh_resolve_output+0x936/0xb40 [ 36.565278] __neigh_update+0x2f66/0x3a60 [ 36.565499] neigh_update+0x52/0x60 [ 36.565683] arp_process+0x1588/0x2de0 [ 36.565916] NF_HOOK+0x1da/0x240 [ 36.566087] arp_rcv+0x3e4/0x6e0 [ 36.566306] __netif_receive_skb_list_core+0x1374/0x15a0 [ 36.566527] netif_receive_skb_list_internal+0x1116/0x17d0 [ 36.566710] napi_complete_done+0x376/0x740 [ 36.566918] virtnet_poll+0x1bae/0x2910 [ 36.567130] __napi_poll+0xf4/0x830 [ 36.567294] net_rx_action+0x97c/0x1ed0 [ 36.567556] handle_softirqs+0x306/0xe10 [ 36.567731] irq_exit_rcu+0x14c/0x2e0 [ 36.567910] do_io_irq+0xd4/0x120 [ 36.568139] io_int_handler+0xc2/0xe8 [ 36.568299] arch_cpu_idle+0xb0/0xc0 [ 36.568540] arch_cpu_idle+0x76/0xc0 [ 36.568726] default_idle_call+0x40/0x70 [ 36.568953] do_idle+0x1d6/0x390 [ 36.569486] cpu_startup_entry+0x9a/0xb0 [ 36.569745] rest_init+0x1ea/0x290 [ 36.570029] start_kernel+0x95e/0xb90 [ 36.570348] startup_continue+0x2e/0x40 [ 36.570703] [ 36.570798] Uninit was created at: [ 36.571002] kmem_cache_alloc_node_noprof+0x9e8/0x10e0 [ 36.571261] kmalloc_reserve+0x12a/0x470 [ 36.571553] __alloc_skb+0x310/0x860 [ 36.571844] __ip_append_data+0x483e/0x6a30 [ 36.572170] ip_append_data+0x11c/0x1e0 [ 36.572477] raw_sendmsg+0x1c8c/0x2180 [ 36.572818] inet_sendmsg+0xe6/0x190 [ 36.573142] __sys_sendto+0x55e/0x8e0 [ 36.573392] __s390x_sys_socketcall+0x19ae/0x2ba0 [ 36.573571] __do_syscall+0x12e/0x240 [ 36.573823] system_call+0x6e/0x90 [ 36.573976] [ 36.574017] Byte 35 of 98 is uninitialized [ 36.574082] Memory access of size 98 starts at 0000000007aa0012 [ 36.574218] [ 36.574325] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G B N 6.17.0-dirty #16 NONE [ 36.574541] Tainted: [B]=BAD_PAGE, [N]=TEST [ 36.574617] Hardware name: IBM 3931 A01 703 (KVM/Linux) [ 36.574755] ===================================================== [ 63.532541] ===================================================== [ 63.533639] BUG: KMSAN: uninit-value in virtqueue_add+0x35c6/0x7c70 [ 63.533989] virtqueue_add+0x35c6/0x7c70 [ 63.534940] virtqueue_add_outbuf+0xa0/0xb0 [ 63.535861] start_xmit+0x288c/0x4a20 [ 63.536708] dev_hard_start_xmit+0x302/0x900 [ 63.537020] sch_direct_xmit+0x340/0xea0 [ 63.537997] __dev_queue_xmit+0x2e94/0x59b0 [ 63.538819] neigh_resolve_output+0x936/0xb40 [ 63.539793] ip_finish_output2+0x1ee2/0x2200 [ 63.540784] __ip_finish_output+0x272/0x7a0 [ 63.541765] ip_finish_output+0x4e/0x5e0 [ 63.542791] ip_output+0x166/0x410 [ 63.543771] ip_push_pending_frames+0x1a2/0x470 [ 63.544753] raw_sendmsg+0x1f06/0x2180 [ 63.545033] inet_sendmsg+0xe6/0x190 [ 63.546006] __sys_sendto+0x55e/0x8e0 ---truncated--- | ||||
| CVE-2025-68756 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: Use RCU in blk_mq_[un]quiesce_tagset() instead of set->tag_list_lock blk_mq_{add,del}_queue_tag_set() functions add and remove queues from tagset, the functions make sure that tagset and queues are marked as shared when two or more queues are attached to the same tagset. Initially a tagset starts as unshared and when the number of added queues reaches two, blk_mq_add_queue_tag_set() marks it as shared along with all the queues attached to it. When the number of attached queues drops to 1 blk_mq_del_queue_tag_set() need to mark both the tagset and the remaining queues as unshared. Both functions need to freeze current queues in tagset before setting on unsetting BLK_MQ_F_TAG_QUEUE_SHARED flag. While doing so, both functions hold set->tag_list_lock mutex, which makes sense as we do not want queues to be added or deleted in the process. This used to work fine until commit 98d81f0df70c ("nvme: use blk_mq_[un]quiesce_tagset") made the nvme driver quiesce tagset instead of quiscing individual queues. blk_mq_quiesce_tagset() does the job and quiesce the queues in set->tag_list while holding set->tag_list_lock also. This results in deadlock between two threads with these stacktraces: __schedule+0x47c/0xbb0 ? timerqueue_add+0x66/0xb0 schedule+0x1c/0xa0 schedule_preempt_disabled+0xa/0x10 __mutex_lock.constprop.0+0x271/0x600 blk_mq_quiesce_tagset+0x25/0xc0 nvme_dev_disable+0x9c/0x250 nvme_timeout+0x1fc/0x520 blk_mq_handle_expired+0x5c/0x90 bt_iter+0x7e/0x90 blk_mq_queue_tag_busy_iter+0x27e/0x550 ? __blk_mq_complete_request_remote+0x10/0x10 ? __blk_mq_complete_request_remote+0x10/0x10 ? __call_rcu_common.constprop.0+0x1c0/0x210 blk_mq_timeout_work+0x12d/0x170 process_one_work+0x12e/0x2d0 worker_thread+0x288/0x3a0 ? rescuer_thread+0x480/0x480 kthread+0xb8/0xe0 ? kthread_park+0x80/0x80 ret_from_fork+0x2d/0x50 ? kthread_park+0x80/0x80 ret_from_fork_asm+0x11/0x20 __schedule+0x47c/0xbb0 ? xas_find+0x161/0x1a0 schedule+0x1c/0xa0 blk_mq_freeze_queue_wait+0x3d/0x70 ? destroy_sched_domains_rcu+0x30/0x30 blk_mq_update_tag_set_shared+0x44/0x80 blk_mq_exit_queue+0x141/0x150 del_gendisk+0x25a/0x2d0 nvme_ns_remove+0xc9/0x170 nvme_remove_namespaces+0xc7/0x100 nvme_remove+0x62/0x150 pci_device_remove+0x23/0x60 device_release_driver_internal+0x159/0x200 unbind_store+0x99/0xa0 kernfs_fop_write_iter+0x112/0x1e0 vfs_write+0x2b1/0x3d0 ksys_write+0x4e/0xb0 do_syscall_64+0x5b/0x160 entry_SYSCALL_64_after_hwframe+0x4b/0x53 The top stacktrace is showing nvme_timeout() called to handle nvme command timeout. timeout handler is trying to disable the controller and as a first step, it needs to blk_mq_quiesce_tagset() to tell blk-mq not to call queue callback handlers. The thread is stuck waiting for set->tag_list_lock as it tries to walk the queues in set->tag_list. The lock is held by the second thread in the bottom stack which is waiting for one of queues to be frozen. The queue usage counter will drop to zero after nvme_timeout() finishes, and this will not happen because the thread will wait for this mutex forever. Given that [un]quiescing queue is an operation that does not need to sleep, update blk_mq_[un]quiesce_tagset() to use RCU instead of taking set->tag_list_lock, update blk_mq_{add,del}_queue_tag_set() to use RCU safe list operations. Also, delete INIT_LIST_HEAD(&q->tag_set_list) in blk_mq_del_queue_tag_set() because we can not re-initialize it while the list is being traversed under RCU. The deleted queue will not be added/deleted to/from a tagset and it will be freed in blk_free_queue() after the end of RCU grace period. | ||||
| CVE-2025-68244 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: Avoid lock inversion when pinning to GGTT on CHV/BXT+VTD On completion of i915_vma_pin_ww(), a synchronous variant of dma_fence_work_commit() is called. When pinning a VMA to GGTT address space on a Cherry View family processor, or on a Broxton generation SoC with VTD enabled, i.e., when stop_machine() is then called from intel_ggtt_bind_vma(), that can potentially lead to lock inversion among reservation_ww and cpu_hotplug locks. [86.861179] ====================================================== [86.861193] WARNING: possible circular locking dependency detected [86.861209] 6.15.0-rc5-CI_DRM_16515-gca0305cadc2d+ #1 Tainted: G U [86.861226] ------------------------------------------------------ [86.861238] i915_module_loa/1432 is trying to acquire lock: [86.861252] ffffffff83489090 (cpu_hotplug_lock){++++}-{0:0}, at: stop_machine+0x1c/0x50 [86.861290] but task is already holding lock: [86.861303] ffffc90002e0b4c8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915] [86.862233] which lock already depends on the new lock. [86.862251] the existing dependency chain (in reverse order) is: [86.862265] -> #5 (reservation_ww_class_mutex){+.+.}-{3:3}: [86.862292] dma_resv_lockdep+0x19a/0x390 [86.862315] do_one_initcall+0x60/0x3f0 [86.862334] kernel_init_freeable+0x3cd/0x680 [86.862353] kernel_init+0x1b/0x200 [86.862369] ret_from_fork+0x47/0x70 [86.862383] ret_from_fork_asm+0x1a/0x30 [86.862399] -> #4 (reservation_ww_class_acquire){+.+.}-{0:0}: [86.862425] dma_resv_lockdep+0x178/0x390 [86.862440] do_one_initcall+0x60/0x3f0 [86.862454] kernel_init_freeable+0x3cd/0x680 [86.862470] kernel_init+0x1b/0x200 [86.862482] ret_from_fork+0x47/0x70 [86.862495] ret_from_fork_asm+0x1a/0x30 [86.862509] -> #3 (&mm->mmap_lock){++++}-{3:3}: [86.862531] down_read_killable+0x46/0x1e0 [86.862546] lock_mm_and_find_vma+0xa2/0x280 [86.862561] do_user_addr_fault+0x266/0x8e0 [86.862578] exc_page_fault+0x8a/0x2f0 [86.862593] asm_exc_page_fault+0x27/0x30 [86.862607] filldir64+0xeb/0x180 [86.862620] kernfs_fop_readdir+0x118/0x480 [86.862635] iterate_dir+0xcf/0x2b0 [86.862648] __x64_sys_getdents64+0x84/0x140 [86.862661] x64_sys_call+0x1058/0x2660 [86.862675] do_syscall_64+0x91/0xe90 [86.862689] entry_SYSCALL_64_after_hwframe+0x76/0x7e [86.862703] -> #2 (&root->kernfs_rwsem){++++}-{3:3}: [86.862725] down_write+0x3e/0xf0 [86.862738] kernfs_add_one+0x30/0x3c0 [86.862751] kernfs_create_dir_ns+0x53/0xb0 [86.862765] internal_create_group+0x134/0x4c0 [86.862779] sysfs_create_group+0x13/0x20 [86.862792] topology_add_dev+0x1d/0x30 [86.862806] cpuhp_invoke_callback+0x4b5/0x850 [86.862822] cpuhp_issue_call+0xbf/0x1f0 [86.862836] __cpuhp_setup_state_cpuslocked+0x111/0x320 [86.862852] __cpuhp_setup_state+0xb0/0x220 [86.862866] topology_sysfs_init+0x30/0x50 [86.862879] do_one_initcall+0x60/0x3f0 [86.862893] kernel_init_freeable+0x3cd/0x680 [86.862908] kernel_init+0x1b/0x200 [86.862921] ret_from_fork+0x47/0x70 [86.862934] ret_from_fork_asm+0x1a/0x30 [86.862947] -> #1 (cpuhp_state_mutex){+.+.}-{3:3}: [86.862969] __mutex_lock+0xaa/0xed0 [86.862982] mutex_lock_nested+0x1b/0x30 [86.862995] __cpuhp_setup_state_cpuslocked+0x67/0x320 [86.863012] __cpuhp_setup_state+0xb0/0x220 [86.863026] page_alloc_init_cpuhp+0x2d/0x60 [86.863041] mm_core_init+0x22/0x2d0 [86.863054] start_kernel+0x576/0xbd0 [86.863068] x86_64_start_reservations+0x18/0x30 [86.863084] x86_64_start_kernel+0xbf/0x110 [86.863098] common_startup_64+0x13e/0x141 [86.863114] -> #0 (cpu_hotplug_lock){++++}-{0:0}: [86.863135] __lock_acquire+0x16 ---truncated--- | ||||
| CVE-2025-40222 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: sh-sci: fix RSCI FIFO overrun handling The receive error handling code is shared between RSCI and all other SCIF port types, but the RSCI overrun_reg is specified as a memory offset, while for other SCIF types it is an enum value used to index into the sci_port_params->regs array, as mentioned above the sci_serial_in() function. For RSCI, the overrun_reg is CSR (0x48), causing the sci_getreg() call inside the sci_handle_fifo_overrun() function to index outside the bounds of the regs array, which currently has a size of 20, as specified by SCI_NR_REGS. Because of this, we end up accessing memory outside of RSCI's rsci_port_params structure, which, when interpreted as a plat_sci_reg, happens to have a non-zero size, causing the following WARN when sci_serial_in() is called, as the accidental size does not match the supported register sizes. The existence of the overrun_reg needs to be checked because SCIx_SH3_SCIF_REGTYPE has overrun_reg set to SCLSR, but SCLSR is not present in the regs array. Avoid calling sci_getreg() for port types which don't use standard register handling. Use the ops->read_reg() and ops->write_reg() functions to properly read and write registers for RSCI, and change the type of the status variable to accommodate the 32-bit CSR register. sci_getreg() and sci_serial_in() are also called with overrun_reg in the sci_mpxed_interrupt() interrupt handler, but that code path is not used for RSCI, as it does not have a muxed interrupt. ------------[ cut here ]------------ Invalid register access WARNING: CPU: 0 PID: 0 at drivers/tty/serial/sh-sci.c:522 sci_serial_in+0x38/0xac Modules linked in: renesas_usbhs at24 rzt2h_adc industrialio_adc sha256 cfg80211 bluetooth ecdh_generic ecc rfkill fuse drm backlight ipv6 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.17.0-rc1+ #30 PREEMPT Hardware name: Renesas RZ/T2H EVK Board based on r9a09g077m44 (DT) pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : sci_serial_in+0x38/0xac lr : sci_serial_in+0x38/0xac sp : ffff800080003e80 x29: ffff800080003e80 x28: ffff800082195b80 x27: 000000000000000d x26: ffff8000821956d0 x25: 0000000000000000 x24: ffff800082195b80 x23: ffff000180e0d800 x22: 0000000000000010 x21: 0000000000000000 x20: 0000000000000010 x19: ffff000180e72000 x18: 000000000000000a x17: ffff8002bcee7000 x16: ffff800080000000 x15: 0720072007200720 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0000000000000058 x10: 0000000000000018 x9 : ffff8000821a6a48 x8 : 0000000000057fa8 x7 : 0000000000000406 x6 : ffff8000821fea48 x5 : ffff00033ef88408 x4 : ffff8002bcee7000 x3 : ffff800082195b80 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff800082195b80 Call trace: sci_serial_in+0x38/0xac (P) sci_handle_fifo_overrun.isra.0+0x70/0x134 sci_er_interrupt+0x50/0x39c __handle_irq_event_percpu+0x48/0x140 handle_irq_event+0x44/0xb0 handle_fasteoi_irq+0xf4/0x1a0 handle_irq_desc+0x34/0x58 generic_handle_domain_irq+0x1c/0x28 gic_handle_irq+0x4c/0x140 call_on_irq_stack+0x30/0x48 do_interrupt_handler+0x80/0x84 el1_interrupt+0x34/0x68 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x6c/0x70 default_idle_call+0x28/0x58 (P) do_idle+0x1f8/0x250 cpu_startup_entry+0x34/0x3c rest_init+0xd8/0xe0 console_on_rootfs+0x0/0x6c __primary_switched+0x88/0x90 ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2023-53692 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix use-after-free read in ext4_find_extent for bigalloc + inline Syzbot found the following issue: loop0: detected capacity change from 0 to 2048 EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none. ================================================================== BUG: KASAN: use-after-free in ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline] BUG: KASAN: use-after-free in ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931 Read of size 4 at addr ffff888073644750 by task syz-executor420/5067 CPU: 0 PID: 5067 Comm: syz-executor420 Not tainted 6.2.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:306 print_report+0x107/0x1f0 mm/kasan/report.c:417 kasan_report+0xcd/0x100 mm/kasan/report.c:517 ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline] ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931 ext4_clu_mapped+0x117/0x970 fs/ext4/extents.c:5809 ext4_insert_delayed_block fs/ext4/inode.c:1696 [inline] ext4_da_map_blocks fs/ext4/inode.c:1806 [inline] ext4_da_get_block_prep+0x9e8/0x13c0 fs/ext4/inode.c:1870 ext4_block_write_begin+0x6a8/0x2290 fs/ext4/inode.c:1098 ext4_da_write_begin+0x539/0x760 fs/ext4/inode.c:3082 generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772 ext4_buffered_write_iter+0x122/0x3a0 fs/ext4/file.c:285 ext4_file_write_iter+0x1d0/0x18f0 call_write_iter include/linux/fs.h:2186 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x7dc/0xc50 fs/read_write.c:584 ksys_write+0x177/0x2a0 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f4b7a9737b9 RSP: 002b:00007ffc5cac3668 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4b7a9737b9 RDX: 00000000175d9003 RSI: 0000000020000200 RDI: 0000000000000004 RBP: 00007f4b7a933050 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000079f R11: 0000000000000246 R12: 00007f4b7a9330e0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Above issue is happens when enable bigalloc and inline data feature. As commit 131294c35ed6 fixed delayed allocation bug in ext4_clu_mapped for bigalloc + inline. But it only resolved issue when has inline data, if inline data has been converted to extent(ext4_da_convert_inline_data_to_extent) before writepages, there is no EXT4_STATE_MAY_INLINE_DATA flag. However i_data is still store inline data in this scene. Then will trigger UAF when find extent. To resolve above issue, there is need to add judge "ext4_has_inline_data(inode)" in ext4_clu_mapped(). | ||||
| CVE-2023-53795 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: IOMMUFD_DESTROY should not increase the refcount syzkaller found a race where IOMMUFD_DESTROY increments the refcount: obj = iommufd_get_object(ucmd->ictx, cmd->id, IOMMUFD_OBJ_ANY); if (IS_ERR(obj)) return PTR_ERR(obj); iommufd_ref_to_users(obj); /* See iommufd_ref_to_users() */ if (!iommufd_object_destroy_user(ucmd->ictx, obj)) As part of the sequence to join the two existing primitives together. Allowing the refcount the be elevated without holding the destroy_rwsem violates the assumption that all temporary refcount elevations are protected by destroy_rwsem. Racing IOMMUFD_DESTROY with iommufd_object_destroy_user() will cause spurious failures: WARNING: CPU: 0 PID: 3076 at drivers/iommu/iommufd/device.c:477 iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:478 Modules linked in: CPU: 0 PID: 3076 Comm: syz-executor.0 Not tainted 6.3.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023 RIP: 0010:iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:477 Code: e8 3d 4e 00 00 84 c0 74 01 c3 0f 0b c3 0f 1f 44 00 00 f3 0f 1e fa 48 89 fe 48 8b bf a8 00 00 00 e8 1d 4e 00 00 84 c0 74 01 c3 <0f> 0b c3 0f 1f 44 00 00 41 57 41 56 41 55 4c 8d ae d0 00 00 00 41 RSP: 0018:ffffc90003067e08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888109ea0300 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000ffffffff RBP: 0000000000000004 R08: 0000000000000000 R09: ffff88810bbb3500 R10: ffff88810bbb3e48 R11: 0000000000000000 R12: ffffc90003067e88 R13: ffffc90003067ea8 R14: ffff888101249800 R15: 00000000fffffffe FS: 00007ff7254fe6c0(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555557262da8 CR3: 000000010a6fd000 CR4: 0000000000350ef0 Call Trace: <TASK> iommufd_test_create_access drivers/iommu/iommufd/selftest.c:596 [inline] iommufd_test+0x71c/0xcf0 drivers/iommu/iommufd/selftest.c:813 iommufd_fops_ioctl+0x10f/0x1b0 drivers/iommu/iommufd/main.c:337 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x84/0xc0 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The solution is to not increment the refcount on the IOMMUFD_DESTROY path at all. Instead use the xa_lock to serialize everything. The refcount check == 1 and xa_erase can be done under a single critical region. This avoids the need for any refcount incrementing. It has the downside that if userspace races destroy with other operations it will get an EBUSY instead of waiting, but this is kind of racing is already dangerous. | ||||
| CVE-2023-53831 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: read sk->sk_family once in sk_mc_loop() syzbot is playing with IPV6_ADDRFORM quite a lot these days, and managed to hit the WARN_ON_ONCE(1) in sk_mc_loop() We have many more similar issues to fix. WARNING: CPU: 1 PID: 1593 at net/core/sock.c:782 sk_mc_loop+0x165/0x260 Modules linked in: CPU: 1 PID: 1593 Comm: kworker/1:3 Not tainted 6.1.40-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 Workqueue: events_power_efficient gc_worker RIP: 0010:sk_mc_loop+0x165/0x260 net/core/sock.c:782 Code: 34 1b fd 49 81 c7 18 05 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 20 00 74 08 4c 89 ff e8 25 36 6d fd 4d 8b 37 eb 13 e8 db 33 1b fd <0f> 0b b3 01 eb 34 e8 d0 33 1b fd 45 31 f6 49 83 c6 38 4c 89 f0 48 RSP: 0018:ffffc90000388530 EFLAGS: 00010246 RAX: ffffffff846d9b55 RBX: 0000000000000011 RCX: ffff88814f884980 RDX: 0000000000000102 RSI: ffffffff87ae5160 RDI: 0000000000000011 RBP: ffffc90000388550 R08: 0000000000000003 R09: ffffffff846d9a65 R10: 0000000000000002 R11: ffff88814f884980 R12: dffffc0000000000 R13: ffff88810dbee000 R14: 0000000000000010 R15: ffff888150084000 FS: 0000000000000000(0000) GS:ffff8881f6b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000180 CR3: 000000014ee5b000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> [<ffffffff8507734f>] ip6_finish_output2+0x33f/0x1ae0 net/ipv6/ip6_output.c:83 [<ffffffff85062766>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline] [<ffffffff85062766>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211 [<ffffffff85061f8c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline] [<ffffffff85061f8c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232 [<ffffffff852071cf>] dst_output include/net/dst.h:444 [inline] [<ffffffff852071cf>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161 [<ffffffff83618fb4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline] [<ffffffff83618fb4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff83618fb4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff83618fb4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff8361ddd9>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84763fc0>] netdev_start_xmit include/linux/netdevice.h:4925 [inline] [<ffffffff84763fc0>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84763fc0>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff8494c650>] sch_direct_xmit+0x2a0/0x9c0 net/sched/sch_generic.c:342 [<ffffffff8494d883>] qdisc_restart net/sched/sch_generic.c:407 [inline] [<ffffffff8494d883>] __qdisc_run+0xb13/0x1e70 net/sched/sch_generic.c:415 [<ffffffff8478c426>] qdisc_run+0xd6/0x260 include/net/pkt_sched.h:125 [<ffffffff84796eac>] net_tx_action+0x7ac/0x940 net/core/dev.c:5247 [<ffffffff858002bd>] __do_softirq+0x2bd/0x9bd kernel/softirq.c:599 [<ffffffff814c3fe8>] invoke_softirq kernel/softirq.c:430 [inline] [<ffffffff814c3fe8>] __irq_exit_rcu+0xc8/0x170 kernel/softirq.c:683 [<ffffffff814c3f09>] irq_exit_rcu+0x9/0x20 kernel/softirq.c:695 | ||||
| CVE-2023-53821 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6_vti: fix slab-use-after-free in decode_session6 When ipv6_vti device is set to the qdisc of the sfb type, the cb field of the sent skb may be modified during enqueuing. Then, slab-use-after-free may occur when ipv6_vti device sends IPv6 packets. The stack information is as follows: BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890 Read of size 1 at addr ffff88802e08edc2 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-next-20230707-00001-g84e2cad7f979 #410 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0xd9/0x150 print_address_description.constprop.0+0x2c/0x3c0 kasan_report+0x11d/0x130 decode_session6+0x103f/0x1890 __xfrm_decode_session+0x54/0xb0 vti6_tnl_xmit+0x3e6/0x1ee0 dev_hard_start_xmit+0x187/0x700 sch_direct_xmit+0x1a3/0xc30 __qdisc_run+0x510/0x17a0 __dev_queue_xmit+0x2215/0x3b10 neigh_connected_output+0x3c2/0x550 ip6_finish_output2+0x55a/0x1550 ip6_finish_output+0x6b9/0x1270 ip6_output+0x1f1/0x540 ndisc_send_skb+0xa63/0x1890 ndisc_send_rs+0x132/0x6f0 addrconf_rs_timer+0x3f1/0x870 call_timer_fn+0x1a0/0x580 expire_timers+0x29b/0x4b0 run_timer_softirq+0x326/0x910 __do_softirq+0x1d4/0x905 irq_exit_rcu+0xb7/0x120 sysvec_apic_timer_interrupt+0x97/0xc0 </IRQ> Allocated by task 9176: kasan_save_stack+0x22/0x40 kasan_set_track+0x25/0x30 __kasan_slab_alloc+0x7f/0x90 kmem_cache_alloc_node+0x1cd/0x410 kmalloc_reserve+0x165/0x270 __alloc_skb+0x129/0x330 netlink_sendmsg+0x9b1/0xe30 sock_sendmsg+0xde/0x190 ____sys_sendmsg+0x739/0x920 ___sys_sendmsg+0x110/0x1b0 __sys_sendmsg+0xf7/0x1c0 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 9176: kasan_save_stack+0x22/0x40 kasan_set_track+0x25/0x30 kasan_save_free_info+0x2b/0x40 ____kasan_slab_free+0x160/0x1c0 slab_free_freelist_hook+0x11b/0x220 kmem_cache_free+0xf0/0x490 skb_free_head+0x17f/0x1b0 skb_release_data+0x59c/0x850 consume_skb+0xd2/0x170 netlink_unicast+0x54f/0x7f0 netlink_sendmsg+0x926/0xe30 sock_sendmsg+0xde/0x190 ____sys_sendmsg+0x739/0x920 ___sys_sendmsg+0x110/0x1b0 __sys_sendmsg+0xf7/0x1c0 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd The buggy address belongs to the object at ffff88802e08ed00 which belongs to the cache skbuff_small_head of size 640 The buggy address is located 194 bytes inside of freed 640-byte region [ffff88802e08ed00, ffff88802e08ef80) As commit f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.") showed, xfrm_decode_session was originally intended only for the receive path. IP6CB(skb)->nhoff is not set during transmission. Therefore, set the cb field in the skb to 0 before sending packets. | ||||
| CVE-2023-54003 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix GID entry ref leak when create_ah fails If AH create request fails, release sgid_attr to avoid GID entry referrence leak reported while releasing GID table | ||||
| CVE-2023-54013 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: interconnect: Fix locking for runpm vs reclaim For cases where icc_bw_set() can be called in callbaths that could deadlock against shrinker/reclaim, such as runpm resume, we need to decouple the icc locking. Introduce a new icc_bw_lock for cases where we need to serialize bw aggregation and update to decouple that from paths that require memory allocation such as node/link creation/ destruction. Fixes this lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 6.2.0-rc8-debug+ #554 Not tainted ------------------------------------------------------ ring0/132 is trying to acquire lock: ffffff80871916d0 (&gmu->lock){+.+.}-{3:3}, at: a6xx_pm_resume+0xf0/0x234 but task is already holding lock: ffffffdb5aee57e8 (dma_fence_map){++++}-{0:0}, at: msm_job_run+0x68/0x150 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (dma_fence_map){++++}-{0:0}: __dma_fence_might_wait+0x74/0xc0 dma_resv_lockdep+0x1f4/0x2f4 do_one_initcall+0x104/0x2bc kernel_init_freeable+0x344/0x34c kernel_init+0x30/0x134 ret_from_fork+0x10/0x20 -> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}: fs_reclaim_acquire+0x80/0xa8 slab_pre_alloc_hook.constprop.0+0x40/0x25c __kmem_cache_alloc_node+0x60/0x1cc __kmalloc+0xd8/0x100 topology_parse_cpu_capacity+0x8c/0x178 get_cpu_for_node+0x88/0xc4 parse_cluster+0x1b0/0x28c parse_cluster+0x8c/0x28c init_cpu_topology+0x168/0x188 smp_prepare_cpus+0x24/0xf8 kernel_init_freeable+0x18c/0x34c kernel_init+0x30/0x134 ret_from_fork+0x10/0x20 -> #2 (fs_reclaim){+.+.}-{0:0}: __fs_reclaim_acquire+0x3c/0x48 fs_reclaim_acquire+0x54/0xa8 slab_pre_alloc_hook.constprop.0+0x40/0x25c __kmem_cache_alloc_node+0x60/0x1cc __kmalloc+0xd8/0x100 kzalloc.constprop.0+0x14/0x20 icc_node_create_nolock+0x4c/0xc4 icc_node_create+0x38/0x58 qcom_icc_rpmh_probe+0x1b8/0x248 platform_probe+0x70/0xc4 really_probe+0x158/0x290 __driver_probe_device+0xc8/0xe0 driver_probe_device+0x44/0x100 __driver_attach+0xf8/0x108 bus_for_each_dev+0x78/0xc4 driver_attach+0x2c/0x38 bus_add_driver+0xd0/0x1d8 driver_register+0xbc/0xf8 __platform_driver_register+0x30/0x3c qnoc_driver_init+0x24/0x30 do_one_initcall+0x104/0x2bc kernel_init_freeable+0x344/0x34c kernel_init+0x30/0x134 ret_from_fork+0x10/0x20 -> #1 (icc_lock){+.+.}-{3:3}: __mutex_lock+0xcc/0x3c8 mutex_lock_nested+0x30/0x44 icc_set_bw+0x88/0x2b4 _set_opp_bw+0x8c/0xd8 _set_opp+0x19c/0x300 dev_pm_opp_set_opp+0x84/0x94 a6xx_gmu_resume+0x18c/0x804 a6xx_pm_resume+0xf8/0x234 adreno_runtime_resume+0x2c/0x38 pm_generic_runtime_resume+0x30/0x44 __rpm_callback+0x15c/0x174 rpm_callback+0x78/0x7c rpm_resume+0x318/0x524 __pm_runtime_resume+0x78/0xbc adreno_load_gpu+0xc4/0x17c msm_open+0x50/0x120 drm_file_alloc+0x17c/0x228 drm_open_helper+0x74/0x118 drm_open+0xa0/0x144 drm_stub_open+0xd4/0xe4 chrdev_open+0x1b8/0x1e4 do_dentry_open+0x2f8/0x38c vfs_open+0x34/0x40 path_openat+0x64c/0x7b4 do_filp_open+0x54/0xc4 do_sys_openat2+0x9c/0x100 do_sys_open+0x50/0x7c __arm64_sys_openat+0x28/0x34 invoke_syscall+0x8c/0x128 el0_svc_common.constprop.0+0xa0/0x11c do_el0_ ---truncated--- | ||||
| CVE-2023-54067 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race when deleting free space root from the dirty cow roots list When deleting the free space tree we are deleting the free space root from the list fs_info->dirty_cowonly_roots without taking the lock that protects it, which is struct btrfs_fs_info::trans_lock. This unsynchronized list manipulation may cause chaos if there's another concurrent manipulation of this list, such as when adding a root to it with ctree.c:add_root_to_dirty_list(). This can result in all sorts of weird failures caused by a race, such as the following crash: [337571.278245] general protection fault, probably for non-canonical address 0xdead000000000108: 0000 [#1] PREEMPT SMP PTI [337571.278933] CPU: 1 PID: 115447 Comm: btrfs Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1 [337571.279153] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [337571.279572] RIP: 0010:commit_cowonly_roots+0x11f/0x250 [btrfs] [337571.279928] Code: 85 38 06 00 (...) [337571.280363] RSP: 0018:ffff9f63446efba0 EFLAGS: 00010206 [337571.280582] RAX: ffff942d98ec2638 RBX: ffff9430b82b4c30 RCX: 0000000449e1c000 [337571.280798] RDX: dead000000000100 RSI: ffff9430021e4900 RDI: 0000000000036070 [337571.281015] RBP: ffff942d98ec2000 R08: ffff942d98ec2000 R09: 000000000000015b [337571.281254] R10: 0000000000000009 R11: 0000000000000001 R12: ffff942fe8fbf600 [337571.281476] R13: ffff942dabe23040 R14: ffff942dabe20800 R15: ffff942d92cf3b48 [337571.281723] FS: 00007f478adb7340(0000) GS:ffff94349fa40000(0000) knlGS:0000000000000000 [337571.281950] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [337571.282184] CR2: 00007f478ab9a3d5 CR3: 000000001e02c001 CR4: 0000000000370ee0 [337571.282416] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [337571.282647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [337571.282874] Call Trace: [337571.283101] <TASK> [337571.283327] ? __die_body+0x1b/0x60 [337571.283570] ? die_addr+0x39/0x60 [337571.283796] ? exc_general_protection+0x22e/0x430 [337571.284022] ? asm_exc_general_protection+0x22/0x30 [337571.284251] ? commit_cowonly_roots+0x11f/0x250 [btrfs] [337571.284531] btrfs_commit_transaction+0x42e/0xf90 [btrfs] [337571.284803] ? _raw_spin_unlock+0x15/0x30 [337571.285031] ? release_extent_buffer+0x103/0x130 [btrfs] [337571.285305] reset_balance_state+0x152/0x1b0 [btrfs] [337571.285578] btrfs_balance+0xa50/0x11e0 [btrfs] [337571.285864] ? __kmem_cache_alloc_node+0x14a/0x410 [337571.286086] btrfs_ioctl+0x249a/0x3320 [btrfs] [337571.286358] ? mod_objcg_state+0xd2/0x360 [337571.286577] ? refill_obj_stock+0xb0/0x160 [337571.286798] ? seq_release+0x25/0x30 [337571.287016] ? __rseq_handle_notify_resume+0x3ba/0x4b0 [337571.287235] ? percpu_counter_add_batch+0x2e/0xa0 [337571.287455] ? __x64_sys_ioctl+0x88/0xc0 [337571.287675] __x64_sys_ioctl+0x88/0xc0 [337571.287901] do_syscall_64+0x38/0x90 [337571.288126] entry_SYSCALL_64_after_hwframe+0x72/0xdc [337571.288352] RIP: 0033:0x7f478aaffe9b So fix this by locking struct btrfs_fs_info::trans_lock before deleting the free space root from that list. | ||||
| CVE-2023-54080 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: skip splitting and logical rewriting on pre-alloc write When doing a relocation, there is a chance that at the time of btrfs_reloc_clone_csums(), there is no checksum for the corresponding region. In this case, btrfs_finish_ordered_zoned()'s sum points to an invalid item and so ordered_extent's logical is set to some invalid value. Then, btrfs_lookup_block_group() in btrfs_zone_finish_endio() failed to find a block group and will hit an assert or a null pointer dereference as following. This can be reprodcued by running btrfs/028 several times (e.g, 4 to 16 times) with a null_blk setup. The device's zone size and capacity is set to 32 MB and the storage size is set to 5 GB on my setup. KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f] CPU: 6 PID: 3105720 Comm: kworker/u16:13 Tainted: G W 6.5.0-rc6-kts+ #1 Hardware name: Supermicro Super Server/X10SRL-F, BIOS 2.0 12/17/2015 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] RIP: 0010:btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs] Code: 41 54 49 89 fc 55 48 89 f5 53 e8 57 7d fc ff 48 8d b8 88 00 00 00 48 89 c3 48 b8 00 00 00 00 00 > 3c 02 00 0f 85 02 01 00 00 f6 83 88 00 00 00 01 0f 84 a8 00 00 RSP: 0018:ffff88833cf87b08 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000011 RSI: 0000000000000004 RDI: 0000000000000088 RBP: 0000000000000002 R08: 0000000000000001 R09: ffffed102877b827 R10: ffff888143bdc13b R11: ffff888125b1cbc0 R12: ffff888143bdc000 R13: 0000000000007000 R14: ffff888125b1cba8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88881e500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3ed85223d5 CR3: 00000001519b4005 CR4: 00000000001706e0 Call Trace: <TASK> ? die_addr+0x3c/0xa0 ? exc_general_protection+0x148/0x220 ? asm_exc_general_protection+0x22/0x30 ? btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs] ? btrfs_zone_finish_endio.part.0+0x19/0x160 [btrfs] btrfs_finish_one_ordered+0x7b8/0x1de0 [btrfs] ? rcu_is_watching+0x11/0xb0 ? lock_release+0x47a/0x620 ? btrfs_finish_ordered_zoned+0x59b/0x800 [btrfs] ? __pfx_btrfs_finish_one_ordered+0x10/0x10 [btrfs] ? btrfs_finish_ordered_zoned+0x358/0x800 [btrfs] ? __smp_call_single_queue+0x124/0x350 ? rcu_is_watching+0x11/0xb0 btrfs_work_helper+0x19f/0xc60 [btrfs] ? __pfx_try_to_wake_up+0x10/0x10 ? _raw_spin_unlock_irq+0x24/0x50 ? rcu_is_watching+0x11/0xb0 process_one_work+0x8c1/0x1430 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_process_one_work+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? _raw_spin_lock_irq+0x52/0x60 worker_thread+0x100/0x12c0 ? __kthread_parkme+0xc1/0x1f0 ? __pfx_worker_thread+0x10/0x10 kthread+0x2ea/0x3c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> On the zoned mode, writing to pre-allocated region means data relocation write. Such write always uses WRITE command so there is no need of splitting and rewriting logical address. Thus, we can just skip the function for the case. | ||||
| CVE-2023-54094 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: prevent skb corruption on frag list segmentation Ian reported several skb corruptions triggered by rx-gro-list, collecting different oops alike: [ 62.624003] BUG: kernel NULL pointer dereference, address: 00000000000000c0 [ 62.631083] #PF: supervisor read access in kernel mode [ 62.636312] #PF: error_code(0x0000) - not-present page [ 62.641541] PGD 0 P4D 0 [ 62.644174] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 62.648629] CPU: 1 PID: 913 Comm: napi/eno2-79 Not tainted 6.4.0 #364 [ 62.655162] Hardware name: Supermicro Super Server/A2SDi-12C-HLN4F, BIOS 1.7a 10/13/2022 [ 62.663344] RIP: 0010:__udp_gso_segment (./include/linux/skbuff.h:2858 ./include/linux/udp.h:23 net/ipv4/udp_offload.c:228 net/ipv4/udp_offload.c:261 net/ipv4/udp_offload.c:277) [ 62.687193] RSP: 0018:ffffbd3a83b4f868 EFLAGS: 00010246 [ 62.692515] RAX: 00000000000000ce RBX: 0000000000000000 RCX: 0000000000000000 [ 62.699743] RDX: ffffa124def8a000 RSI: 0000000000000079 RDI: ffffa125952a14d4 [ 62.706970] RBP: ffffa124def8a000 R08: 0000000000000022 R09: 00002000001558c9 [ 62.714199] R10: 0000000000000000 R11: 00000000be554639 R12: 00000000000000e2 [ 62.721426] R13: ffffa125952a1400 R14: ffffa125952a1400 R15: 00002000001558c9 [ 62.728654] FS: 0000000000000000(0000) GS:ffffa127efa40000(0000) knlGS:0000000000000000 [ 62.736852] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 62.742702] CR2: 00000000000000c0 CR3: 00000001034b0000 CR4: 00000000003526e0 [ 62.749948] Call Trace: [ 62.752498] <TASK> [ 62.779267] inet_gso_segment (net/ipv4/af_inet.c:1398) [ 62.787605] skb_mac_gso_segment (net/core/gro.c:141) [ 62.791906] __skb_gso_segment (net/core/dev.c:3403 (discriminator 2)) [ 62.800492] validate_xmit_skb (./include/linux/netdevice.h:4862 net/core/dev.c:3659) [ 62.804695] validate_xmit_skb_list (net/core/dev.c:3710) [ 62.809158] sch_direct_xmit (net/sched/sch_generic.c:330) [ 62.813198] __dev_queue_xmit (net/core/dev.c:3805 net/core/dev.c:4210) net/netfilter/core.c:626) [ 62.821093] br_dev_queue_push_xmit (net/bridge/br_forward.c:55) [ 62.825652] maybe_deliver (net/bridge/br_forward.c:193) [ 62.829420] br_flood (net/bridge/br_forward.c:233) [ 62.832758] br_handle_frame_finish (net/bridge/br_input.c:215) [ 62.837403] br_handle_frame (net/bridge/br_input.c:298 net/bridge/br_input.c:416) [ 62.851417] __netif_receive_skb_core.constprop.0 (net/core/dev.c:5387) [ 62.866114] __netif_receive_skb_list_core (net/core/dev.c:5570) [ 62.871367] netif_receive_skb_list_internal (net/core/dev.c:5638 net/core/dev.c:5727) [ 62.876795] napi_complete_done (./include/linux/list.h:37 ./include/net/gro.h:434 ./include/net/gro.h:429 net/core/dev.c:6067) [ 62.881004] ixgbe_poll (drivers/net/ethernet/intel/ixgbe/ixgbe_main.c:3191) [ 62.893534] __napi_poll (net/core/dev.c:6498) [ 62.897133] napi_threaded_poll (./include/linux/netpoll.h:89 net/core/dev.c:6640) [ 62.905276] kthread (kernel/kthread.c:379) [ 62.913435] ret_from_fork (arch/x86/entry/entry_64.S:314) [ 62.917119] </TASK> In the critical scenario, rx-gro-list GRO-ed packets are fed, via a bridge, both to the local input path and to an egress device (tun). The segmentation of such packets unsafely writes to the cloned skbs with shared heads. This change addresses the issue by uncloning as needed the to-be-segmented skbs. | ||||
| CVE-2023-54116 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/fbdev-generic: prohibit potential out-of-bounds access The fbdev test of IGT may write after EOF, which lead to out-of-bound access for drm drivers with fbdev-generic. For example, run fbdev test on a x86+ast2400 platform, with 1680x1050 resolution, will cause the linux kernel hang with the following call trace: Oops: 0000 [#1] PREEMPT SMP PTI [IGT] fbdev: starting subtest eof Workqueue: events drm_fb_helper_damage_work [drm_kms_helper] [IGT] fbdev: starting subtest nullptr RIP: 0010:memcpy_erms+0xa/0x20 RSP: 0018:ffffa17d40167d98 EFLAGS: 00010246 RAX: ffffa17d4eb7fa80 RBX: ffffa17d40e0aa80 RCX: 00000000000014c0 RDX: 0000000000001a40 RSI: ffffa17d40e0b000 RDI: ffffa17d4eb80000 RBP: ffffa17d40167e20 R08: 0000000000000000 R09: ffff89522ecff8c0 R10: ffffa17d4e4c5000 R11: 0000000000000000 R12: ffffa17d4eb7fa80 R13: 0000000000001a40 R14: 000000000000041a R15: ffffa17d40167e30 FS: 0000000000000000(0000) GS:ffff895257380000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa17d40e0b000 CR3: 00000001eaeca006 CR4: 00000000001706e0 Call Trace: <TASK> ? drm_fbdev_generic_helper_fb_dirty+0x207/0x330 [drm_kms_helper] drm_fb_helper_damage_work+0x8f/0x170 [drm_kms_helper] process_one_work+0x21f/0x430 worker_thread+0x4e/0x3c0 ? __pfx_worker_thread+0x10/0x10 kthread+0xf4/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> CR2: ffffa17d40e0b000 ---[ end trace 0000000000000000 ]--- The is because damage rectangles computed by drm_fb_helper_memory_range_to_clip() function is not guaranteed to be bound in the screen's active display area. Possible reasons are: 1) Buffers are allocated in the granularity of page size, for mmap system call support. The shadow screen buffer consumed by fbdev emulation may also choosed be page size aligned. 2) The DIV_ROUND_UP() used in drm_fb_helper_memory_range_to_clip() will introduce off-by-one error. For example, on a 16KB page size system, in order to store a 1920x1080 XRGB framebuffer, we need allocate 507 pages. Unfortunately, the size 1920*1080*4 can not be divided exactly by 16KB. 1920 * 1080 * 4 = 8294400 bytes 506 * 16 * 1024 = 8290304 bytes 507 * 16 * 1024 = 8306688 bytes line_length = 1920*4 = 7680 bytes 507 * 16 * 1024 / 7680 = 1081.6 off / line_length = 507 * 16 * 1024 / 7680 = 1081 DIV_ROUND_UP(507 * 16 * 1024, 7680) will yeild 1082 memcpy_toio() typically issue the copy line by line, when copy the last line, out-of-bound access will be happen. Because: 1082 * line_length = 1082 * 7680 = 8309760, and 8309760 > 8306688 Note that userspace may still write to the invisiable area if a larger buffer than width x stride is exposed. But it is not a big issue as long as there still have memory resolve the access if not drafting so far. - Also limit the y1 (Daniel) - keep fix patch it to minimal (Daniel) - screen_size is page size aligned because of it need mmap (Thomas) - Adding fixes tag (Thomas) | ||||
| CVE-2023-54134 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: autofs: fix memory leak of waitqueues in autofs_catatonic_mode Syzkaller reports a memory leak: BUG: memory leak unreferenced object 0xffff88810b279e00 (size 96): comm "syz-executor399", pid 3631, jiffies 4294964921 (age 23.870s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 08 9e 27 0b 81 88 ff ff ..........'..... 08 9e 27 0b 81 88 ff ff 00 00 00 00 00 00 00 00 ..'............. backtrace: [<ffffffff814cfc90>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1046 [<ffffffff81bb75ca>] kmalloc include/linux/slab.h:576 [inline] [<ffffffff81bb75ca>] autofs_wait+0x3fa/0x9a0 fs/autofs/waitq.c:378 [<ffffffff81bb88a7>] autofs_do_expire_multi+0xa7/0x3e0 fs/autofs/expire.c:593 [<ffffffff81bb8c33>] autofs_expire_multi+0x53/0x80 fs/autofs/expire.c:619 [<ffffffff81bb6972>] autofs_root_ioctl_unlocked+0x322/0x3b0 fs/autofs/root.c:897 [<ffffffff81bb6a95>] autofs_root_ioctl+0x25/0x30 fs/autofs/root.c:910 [<ffffffff81602a9c>] vfs_ioctl fs/ioctl.c:51 [inline] [<ffffffff81602a9c>] __do_sys_ioctl fs/ioctl.c:870 [inline] [<ffffffff81602a9c>] __se_sys_ioctl fs/ioctl.c:856 [inline] [<ffffffff81602a9c>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856 [<ffffffff84608225>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff84608225>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd autofs_wait_queue structs should be freed if their wait_ctr becomes zero. Otherwise they will be lost. In this case an AUTOFS_IOC_EXPIRE_MULTI ioctl is done, then a new waitqueue struct is allocated in autofs_wait(), its initial wait_ctr equals 2. After that wait_event_killable() is interrupted (it returns -ERESTARTSYS), so that 'wq->name.name == NULL' condition may be not satisfied. Actually, this condition can be satisfied when autofs_wait_release() or autofs_catatonic_mode() is called and, what is also important, wait_ctr is decremented in those places. Upon the exit of autofs_wait(), wait_ctr is decremented to 1. Then the unmounting process begins: kill_sb calls autofs_catatonic_mode(), which should have freed the waitqueues, but it only decrements its usage counter to zero which is not a correct behaviour. edit:imk This description is of course not correct. The umount performed as a result of an expire is a umount of a mount that has been automounted, it's not the autofs mount itself. They happen independently, usually after everything mounted within the autofs file system has been expired away. If everything hasn't been expired away the automount daemon can still exit leaving mounts in place. But expires done in both cases will result in a notification that calls autofs_wait_release() with a result status. The problem case is the summary execution of of the automount daemon. In this case any waiting processes won't be woken up until either they are terminated or the mount is umounted. end edit: imk So in catatonic mode we should free waitqueues which counter becomes zero. edit: imk Initially I was concerned that the calling of autofs_wait_release() and autofs_catatonic_mode() was not mutually exclusive but that can't be the case (obviously) because the queue entry (or entries) is removed from the list when either of these two functions are called. Consequently the wait entry will be freed by only one of these functions or by the woken process in autofs_wait() depending on the order of the calls. end edit: imk | ||||
| CVE-2023-54177 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: quota: fix warning in dqgrab() There's issue as follows when do fault injection: WARNING: CPU: 1 PID: 14870 at include/linux/quotaops.h:51 dquot_disable+0x13b7/0x18c0 Modules linked in: CPU: 1 PID: 14870 Comm: fsconfig Not tainted 6.3.0-next-20230505-00006-g5107a9c821af-dirty #541 RIP: 0010:dquot_disable+0x13b7/0x18c0 RSP: 0018:ffffc9000acc79e0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88825e41b980 RDX: 0000000000000000 RSI: ffff88825e41b980 RDI: 0000000000000002 RBP: ffff888179f68000 R08: ffffffff82087ca7 R09: 0000000000000000 R10: 0000000000000001 R11: ffffed102f3ed026 R12: ffff888179f68130 R13: ffff888179f68110 R14: dffffc0000000000 R15: ffff888179f68118 FS: 00007f450a073740(0000) GS:ffff88882fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe96f2efd8 CR3: 000000025c8ad000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dquot_load_quota_sb+0xd53/0x1060 dquot_resume+0x172/0x230 ext4_reconfigure+0x1dc6/0x27b0 reconfigure_super+0x515/0xa90 __x64_sys_fsconfig+0xb19/0xd20 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Above issue may happens as follows: ProcessA ProcessB ProcessC sys_fsconfig vfs_fsconfig_locked reconfigure_super ext4_remount dquot_suspend -> suspend all type quota sys_fsconfig vfs_fsconfig_locked reconfigure_super ext4_remount dquot_resume ret = dquot_load_quota_sb add_dquot_ref do_open -> open file O_RDWR vfs_open do_dentry_open get_write_access atomic_inc_unless_negative(&inode->i_writecount) ext4_file_open dquot_file_open dquot_initialize __dquot_initialize dqget atomic_inc(&dquot->dq_count); __dquot_initialize __dquot_initialize dqget if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) ext4_acquire_dquot -> Return error DQ_ACTIVE_B flag isn't set dquot_disable invalidate_dquots if (atomic_read(&dquot->dq_count)) dqgrab WARN_ON_ONCE(!test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) -> Trigger warning In the above scenario, 'dquot->dq_flags' has no DQ_ACTIVE_B is normal when dqgrab(). To solve above issue just replace the dqgrab() use in invalidate_dquots() with atomic_inc(&dquot->dq_count). | ||||
| CVE-2023-54157 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF of alloc->vma in race with munmap() [ cmllamas: clean forward port from commit 015ac18be7de ("binder: fix UAF of alloc->vma in race with munmap()") in 5.10 stable. It is needed in mainline after the revert of commit a43cfc87caaf ("android: binder: stop saving a pointer to the VMA") as pointed out by Liam. The commit log and tags have been tweaked to reflect this. ] In commit 720c24192404 ("ANDROID: binder: change down_write to down_read") binder assumed the mmap read lock is sufficient to protect alloc->vma inside binder_update_page_range(). This used to be accurate until commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap"), which now downgrades the mmap_lock after detaching the vma from the rbtree in munmap(). Then it proceeds to teardown and free the vma with only the read lock held. This means that accesses to alloc->vma in binder_update_page_range() now will race with vm_area_free() in munmap() and can cause a UAF as shown in the following KASAN trace: ================================================================== BUG: KASAN: use-after-free in vm_insert_page+0x7c/0x1f0 Read of size 8 at addr ffff16204ad00600 by task server/558 CPU: 3 PID: 558 Comm: server Not tainted 5.10.150-00001-gdc8dcf942daa #1 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2a0 show_stack+0x18/0x2c dump_stack+0xf8/0x164 print_address_description.constprop.0+0x9c/0x538 kasan_report+0x120/0x200 __asan_load8+0xa0/0xc4 vm_insert_page+0x7c/0x1f0 binder_update_page_range+0x278/0x50c binder_alloc_new_buf+0x3f0/0xba0 binder_transaction+0x64c/0x3040 binder_thread_write+0x924/0x2020 binder_ioctl+0x1610/0x2e5c __arm64_sys_ioctl+0xd4/0x120 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 Allocated by task 559: kasan_save_stack+0x38/0x6c __kasan_kmalloc.constprop.0+0xe4/0xf0 kasan_slab_alloc+0x18/0x2c kmem_cache_alloc+0x1b0/0x2d0 vm_area_alloc+0x28/0x94 mmap_region+0x378/0x920 do_mmap+0x3f0/0x600 vm_mmap_pgoff+0x150/0x17c ksys_mmap_pgoff+0x284/0x2dc __arm64_sys_mmap+0x84/0xa4 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 Freed by task 560: kasan_save_stack+0x38/0x6c kasan_set_track+0x28/0x40 kasan_set_free_info+0x24/0x4c __kasan_slab_free+0x100/0x164 kasan_slab_free+0x14/0x20 kmem_cache_free+0xc4/0x34c vm_area_free+0x1c/0x2c remove_vma+0x7c/0x94 __do_munmap+0x358/0x710 __vm_munmap+0xbc/0x130 __arm64_sys_munmap+0x4c/0x64 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 [...] ================================================================== To prevent the race above, revert back to taking the mmap write lock inside binder_update_page_range(). One might expect an increase of mmap lock contention. However, binder already serializes these calls via top level alloc->mutex. Also, there was no performance impact shown when running the binder benchmark tests. | ||||
| CVE-2023-54196 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix NULL pointer dereference in 'ni_write_inode' Syzbot found the following issue: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000016 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af56000 [0000000000000016] pgd=08000001090da003, p4d=08000001090da003, pud=08000001090ce003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 3036 Comm: syz-executor206 Not tainted 6.0.0-rc6-syzkaller-17739-g16c9f284e746 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : is_rec_inuse fs/ntfs3/ntfs.h:313 [inline] pc : ni_write_inode+0xac/0x798 fs/ntfs3/frecord.c:3232 lr : ni_write_inode+0xa0/0x798 fs/ntfs3/frecord.c:3226 sp : ffff8000126c3800 x29: ffff8000126c3860 x28: 0000000000000000 x27: ffff0000c8b02000 x26: ffff0000c7502320 x25: ffff0000c7502288 x24: 0000000000000000 x23: ffff80000cbec91c x22: ffff0000c8b03000 x21: ffff0000c8b02000 x20: 0000000000000001 x19: ffff0000c75024d8 x18: 00000000000000c0 x17: ffff80000dd1b198 x16: ffff80000db59158 x15: ffff0000c4b6b500 x14: 00000000000000b8 x13: 0000000000000000 x12: ffff0000c4b6b500 x11: ff80800008be1b60 x10: 0000000000000000 x9 : ffff0000c4b6b500 x8 : 0000000000000000 x7 : ffff800008be1b50 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000008 x1 : 0000000000000001 x0 : 0000000000000000 Call trace: is_rec_inuse fs/ntfs3/ntfs.h:313 [inline] ni_write_inode+0xac/0x798 fs/ntfs3/frecord.c:3232 ntfs_evict_inode+0x54/0x84 fs/ntfs3/inode.c:1744 evict+0xec/0x334 fs/inode.c:665 iput_final fs/inode.c:1748 [inline] iput+0x2c4/0x324 fs/inode.c:1774 ntfs_new_inode+0x7c/0xe0 fs/ntfs3/fsntfs.c:1660 ntfs_create_inode+0x20c/0xe78 fs/ntfs3/inode.c:1278 ntfs_create+0x54/0x74 fs/ntfs3/namei.c:100 lookup_open fs/namei.c:3413 [inline] open_last_lookups fs/namei.c:3481 [inline] path_openat+0x804/0x11c4 fs/namei.c:3688 do_filp_open+0xdc/0x1b8 fs/namei.c:3718 do_sys_openat2+0xb8/0x22c fs/open.c:1311 do_sys_open fs/open.c:1327 [inline] __do_sys_openat fs/open.c:1343 [inline] __se_sys_openat fs/open.c:1338 [inline] __arm64_sys_openat+0xb0/0xe0 fs/open.c:1338 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall arch/arm64/kernel/syscall.c:52 [inline] el0_svc_common+0x138/0x220 arch/arm64/kernel/syscall.c:142 do_el0_svc+0x48/0x164 arch/arm64/kernel/syscall.c:206 el0_svc+0x58/0x150 arch/arm64/kernel/entry-common.c:636 el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:654 el0t_64_sync+0x18c/0x190 Code: 97dafee4 340001b4 f9401328 2a1f03e0 (79402d14) ---[ end trace 0000000000000000 ]--- Above issue may happens as follows: ntfs_new_inode mi_init mi->mrec = kmalloc(sbi->record_size, GFP_NOFS); -->failed to allocate memory if (!mi->mrec) return -ENOMEM; iput iput_final evict ntfs_evict_inode ni_write_inode is_rec_inuse(ni->mi.mrec)-> As 'ni->mi.mrec' is NULL trigger NULL-ptr-deref To solve above issue if new inode failed make inode bad before call 'iput()' in 'ntfs_new_inode()'. | ||||