Export limit exceeded: 20097 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20097 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40119 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix potential null deref in ext4_mb_init() In ext4_mb_init(), ext4_mb_avg_fragment_size_destroy() may be called when sbi->s_mb_avg_fragment_size remains uninitialized (e.g., if groupinfo slab cache allocation fails). Since ext4_mb_avg_fragment_size_destroy() lacks null pointer checking, this leads to a null pointer dereference. ================================================================== EXT4-fs: no memory for groupinfo slab cache BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: Oops: 0002 [#1] SMP PTI CPU:2 UID: 0 PID: 87 Comm:mount Not tainted 6.17.0-rc2 #1134 PREEMPT(none) RIP: 0010:_raw_spin_lock_irqsave+0x1b/0x40 Call Trace: <TASK> xa_destroy+0x61/0x130 ext4_mb_init+0x483/0x540 __ext4_fill_super+0x116d/0x17b0 ext4_fill_super+0xd3/0x280 get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x29/0xd0 do_new_mount+0x197/0x300 __x64_sys_mount+0x116/0x150 do_syscall_64+0x50/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ================================================================== Therefore, add necessary null check to ext4_mb_avg_fragment_size_destroy() to prevent this issue. The same fix is also applied to ext4_mb_largest_free_orders_destroy(). | ||||
| CVE-2025-40118 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: pm80xx: Fix array-index-out-of-of-bounds on rmmod Since commit f7b705c238d1 ("scsi: pm80xx: Set phy_attached to zero when device is gone") UBSAN reports: UBSAN: array-index-out-of-bounds in drivers/scsi/pm8001/pm8001_sas.c:786:17 index 28 is out of range for type 'pm8001_phy [16]' on rmmod when using an expander. For a direct attached device, attached_phy contains the local phy id. For a device behind an expander, attached_phy contains the remote phy id, not the local phy id. I.e. while pm8001_ha will have pm8001_ha->chip->n_phy local phys, for a device behind an expander, attached_phy can be much larger than pm8001_ha->chip->n_phy (depending on the amount of phys of the expander). E.g. on my system pm8001_ha has 8 phys with phy ids 0-7. One of the ports has an expander connected. The expander has 31 phys with phy ids 0-30. The pm8001_ha->phy array only contains the phys of the HBA. It does not contain the phys of the expander. Thus, it is wrong to use attached_phy to index the pm8001_ha->phy array for a device behind an expander. Thus, we can only clear phy_attached for devices that are directly attached. | ||||
| CVE-2025-40117 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: misc: pci_endpoint_test: Fix array underflow in pci_endpoint_test_ioctl() Commit eefb83790a0d ("misc: pci_endpoint_test: Add doorbell test case") added NO_BAR (-1) to the pci_barno enum which, in practical terms, changes the enum from an unsigned int to a signed int. If the user passes a negative number in pci_endpoint_test_ioctl() then it results in an array underflow in pci_endpoint_test_bar(). | ||||
| CVE-2025-40115 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix crash in transport port remove by using ioc_info() During mpt3sas_transport_port_remove(), messages were logged with dev_printk() against &mpt3sas_port->port->dev. At this point the SAS transport device may already be partially unregistered or freed, leading to a crash when accessing its struct device. Using ioc_info(), which logs via the PCI device (ioc->pdev->dev), guaranteed to remain valid until driver removal. [83428.295776] Oops: general protection fault, probably for non-canonical address 0x6f702f323a33312d: 0000 [#1] SMP NOPTI [83428.295785] CPU: 145 UID: 0 PID: 113296 Comm: rmmod Kdump: loaded Tainted: G OE 6.16.0-rc1+ #1 PREEMPT(voluntary) [83428.295792] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [83428.295795] Hardware name: Dell Inc. Precision 7875 Tower/, BIOS 89.1.67 02/23/2024 [83428.295799] RIP: 0010:__dev_printk+0x1f/0x70 [83428.295805] Code: 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 49 89 d1 48 85 f6 74 52 4c 8b 46 50 4d 85 c0 74 1f 48 8b 46 68 48 85 c0 74 22 <48> 8b 08 0f b6 7f 01 48 c7 c2 db e8 42 ad 83 ef 30 e9 7b f8 ff ff [83428.295813] RSP: 0018:ff85aeafc3137bb0 EFLAGS: 00010206 [83428.295817] RAX: 6f702f323a33312d RBX: ff4290ee81292860 RCX: 5000cca25103be32 [83428.295820] RDX: ff85aeafc3137bb8 RSI: ff4290eeb1966c00 RDI: ffffffffc1560845 [83428.295823] RBP: ff85aeafc3137c18 R08: 74726f702f303a33 R09: ff85aeafc3137bb8 [83428.295826] R10: ff85aeafc3137b18 R11: ff4290f5bd60fe68 R12: ff4290ee81290000 [83428.295830] R13: ff4290ee6e345de0 R14: ff4290ee81290000 R15: ff4290ee6e345e30 [83428.295833] FS: 00007fd9472a6740(0000) GS:ff4290f5ce96b000(0000) knlGS:0000000000000000 [83428.295837] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [83428.295840] CR2: 00007f242b4db238 CR3: 00000002372b8006 CR4: 0000000000771ef0 [83428.295844] PKRU: 55555554 [83428.295846] Call Trace: [83428.295848] <TASK> [83428.295850] _dev_printk+0x5c/0x80 [83428.295857] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.295863] mpt3sas_transport_port_remove+0x1c7/0x420 [mpt3sas] [83428.295882] _scsih_remove_device+0x21b/0x280 [mpt3sas] [83428.295894] ? _scsih_expander_node_remove+0x108/0x140 [mpt3sas] [83428.295906] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.295910] mpt3sas_device_remove_by_sas_address.part.0+0x8f/0x110 [mpt3sas] [83428.295921] _scsih_expander_node_remove+0x129/0x140 [mpt3sas] [83428.295933] _scsih_expander_node_remove+0x6a/0x140 [mpt3sas] [83428.295944] scsih_remove+0x3f0/0x4a0 [mpt3sas] [83428.295957] pci_device_remove+0x3b/0xb0 [83428.295962] device_release_driver_internal+0x193/0x200 [83428.295968] driver_detach+0x44/0x90 [83428.295971] bus_remove_driver+0x69/0xf0 [83428.295975] pci_unregister_driver+0x2a/0xb0 [83428.295979] _mpt3sas_exit+0x1f/0x300 [mpt3sas] [83428.295991] __do_sys_delete_module.constprop.0+0x174/0x310 [83428.295997] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296000] ? __x64_sys_getdents64+0x9a/0x110 [83428.296005] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296009] ? syscall_trace_enter+0xf6/0x1b0 [83428.296014] do_syscall_64+0x7b/0x2c0 [83428.296019] ? srso_alias_return_thunk+0x5/0xfbef5 [83428.296023] entry_SYSCALL_64_after_hwframe+0x76/0x7e | ||||
| CVE-2025-40113 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom: pas: Shutdown lite ADSP DTB on X1E The ADSP firmware on X1E has separate firmware binaries for the main firmware and the DTB. The same applies for the "lite" firmware loaded by the boot firmware. When preparing to load the new ADSP firmware we shutdown the lite_pas_id for the main firmware, but we don't shutdown the corresponding lite pas_id for the DTB. The fact that we're leaving it "running" forever becomes obvious if you try to reuse (or just access) the memory region used by the "lite" firmware: The &adsp_boot_mem is accessible, but accessing the &adsp_boot_dtb_mem results in a crash. We don't support reusing the memory regions currently, but nevertheless we should not keep part of the lite firmware running. Fix this by adding the lite_dtb_pas_id and shutting it down as well. We don't have a way to detect if the lite firmware is actually running yet, so ignore the return status of qcom_scm_pas_shutdown() for now. This was already the case before, the assignment to "ret" is not used anywhere. | ||||
| CVE-2025-40255 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: core: prevent NULL deref in generic_hwtstamp_ioctl_lower() The ethtool tsconfig Netlink path can trigger a null pointer dereference. A call chain such as: tsconfig_prepare_data() -> dev_get_hwtstamp_phylib() -> vlan_hwtstamp_get() -> generic_hwtstamp_get_lower() -> generic_hwtstamp_ioctl_lower() results in generic_hwtstamp_ioctl_lower() being called with kernel_cfg->ifr as NULL. The generic_hwtstamp_ioctl_lower() function does not expect a NULL ifr and dereferences it, leading to a system crash. Fix this by adding a NULL check for kernel_cfg->ifr in generic_hwtstamp_ioctl_lower(). If ifr is NULL, return -EINVAL. | ||||
| CVE-2025-40001 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mvsas: Fix use-after-free bugs in mvs_work_queue During the detaching of Marvell's SAS/SATA controller, the original code calls cancel_delayed_work() in mvs_free() to cancel the delayed work item mwq->work_q. However, if mwq->work_q is already running, the cancel_delayed_work() may fail to cancel it. This can lead to use-after-free scenarios where mvs_free() frees the mvs_info while mvs_work_queue() is still executing and attempts to access the already-freed mvs_info. A typical race condition is illustrated below: CPU 0 (remove) | CPU 1 (delayed work callback) mvs_pci_remove() | mvs_free() | mvs_work_queue() cancel_delayed_work() | kfree(mvi) | | mvi-> // UAF Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the delayed work item is properly canceled and any executing delayed work item completes before the mvs_info is deallocated. This bug was found by static analysis. | ||||
| CVE-2025-39998 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: target_core_configfs: Add length check to avoid buffer overflow A buffer overflow arises from the usage of snprintf to write into the buffer "buf" in target_lu_gp_members_show function located in /drivers/target/target_core_configfs.c. This buffer is allocated with size LU_GROUP_NAME_BUF (256 bytes). snprintf(...) formats multiple strings into buf with the HBA name (hba->hba_group.cg_item), a slash character, a devicename (dev-> dev_group.cg_item) and a newline character, the total formatted string length may exceed the buffer size of 256 bytes. Since snprintf() returns the total number of bytes that would have been written (the length of %s/%sn ), this value may exceed the buffer length (256 bytes) passed to memcpy(), this will ultimately cause function memcpy reporting a buffer overflow error. An additional check of the return value of snprintf() can avoid this buffer overflow. | ||||
| CVE-2025-39999 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix blk_mq_tags double free while nr_requests grown In the case user trigger tags grow by queue sysfs attribute nr_requests, hctx->sched_tags will be freed directly and replaced with a new allocated tags, see blk_mq_tag_update_depth(). The problem is that hctx->sched_tags is from elevator->et->tags, while et->tags is still the freed tags, hence later elevator exit will try to free the tags again, causing kernel panic. Fix this problem by replacing et->tags with new allocated tags as well. Noted there are still some long term problems that will require some refactor to be fixed thoroughly[1]. [1] https://lore.kernel.org/all/20250815080216.410665-1-yukuai1@huaweicloud.com/ | ||||
| CVE-2025-40034 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI/AER: Avoid NULL pointer dereference in aer_ratelimit() When platform firmware supplies error information to the OS, e.g., via the ACPI APEI GHES mechanism, it may identify an error source device that doesn't advertise an AER Capability and therefore dev->aer_info, which contains AER stats and ratelimiting data, is NULL. pci_dev_aer_stats_incr() already checks dev->aer_info for NULL, but aer_ratelimit() did not, leading to NULL pointer dereferences like this one from the URL below: {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 {1}[Hardware Error]: event severity: corrected {1}[Hardware Error]: device_id: 0000:00:00.0 {1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x2020 {1}[Hardware Error]: aer_cor_status: 0x00001000, aer_cor_mask: 0x00002000 BUG: kernel NULL pointer dereference, address: 0000000000000264 RIP: 0010:___ratelimit+0xc/0x1b0 pci_print_aer+0x141/0x360 aer_recover_work_func+0xb5/0x130 [8086:2020] is an Intel "Sky Lake-E DMI3 Registers" device that claims to be a Root Port but does not advertise an AER Capability. Add a NULL check in aer_ratelimit() to avoid the NULL pointer dereference. Note that this also prevents ratelimiting these events from GHES. [bhelgaas: add crash details to commit log] | ||||
| CVE-2025-40048 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: uio_hv_generic: Let userspace take care of interrupt mask Remove the logic to set interrupt mask by default in uio_hv_generic driver as the interrupt mask value is supposed to be controlled completely by the user space. If the mask bit gets changed by the driver, concurrently with user mode operating on the ring, the mask bit may be set when it is supposed to be clear, and the user-mode driver will miss an interrupt which will cause a hang. For eg- when the driver sets inbound ring buffer interrupt mask to 1, the host does not interrupt the guest on the UIO VMBus channel. However, setting the mask does not prevent the host from putting a message in the inbound ring buffer. So let’s assume that happens, the host puts a message into the ring buffer but does not interrupt. Subsequently, the user space code in the guest sets the inbound ring buffer interrupt mask to 0, saying “Hey, I’m ready for interrupts”. User space code then calls pread() to wait for an interrupt. Then one of two things happens: * The host never sends another message. So the pread() waits forever. * The host does send another message. But because there’s already a message in the ring buffer, it doesn’t generate an interrupt. This is the correct behavior, because the host should only send an interrupt when the inbound ring buffer transitions from empty to not-empty. Adding an additional message to a ring buffer that is not empty is not supposed to generate an interrupt on the guest. Since the guest is waiting in pread() and not removing messages from the ring buffer, the pread() waits forever. This could be easily reproduced in hv_fcopy_uio_daemon if we delay setting interrupt mask to 0. Similarly if hv_uio_channel_cb() sets the interrupt_mask to 1, there’s a race condition. Once user space empties the inbound ring buffer, but before user space sets interrupt_mask to 0, the host could put another message in the ring buffer but it wouldn’t interrupt. Then the next pread() would hang. Fix these by removing all instances where interrupt_mask is changed, while keeping the one in set_event() unchanged to enable userspace control the interrupt mask by writing 0/1 to /dev/uioX. | ||||
| CVE-2025-40058 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Disallow dirty tracking if incoherent page walk Dirty page tracking relies on the IOMMU atomically updating the dirty bit in the paging-structure entry. For this operation to succeed, the paging- structure memory must be coherent between the IOMMU and the CPU. In another word, if the iommu page walk is incoherent, dirty page tracking doesn't work. The Intel VT-d specification, Section 3.10 "Snoop Behavior" states: "Remapping hardware encountering the need to atomically update A/EA/D bits in a paging-structure entry that is not snooped will result in a non- recoverable fault." To prevent an IOMMU from being incorrectly configured for dirty page tracking when it is operating in an incoherent mode, mark SSADS as supported only when both ecap_slads and ecap_smpwc are supported. | ||||
| CVE-2025-40063 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: comp - Use same definition of context alloc and free ops In commit 42d9f6c77479 ("crypto: acomp - Move scomp stream allocation code into acomp"), the crypto_acomp_streams struct was made to rely on having the alloc_ctx and free_ctx operations defined in the same order as the scomp_alg struct. But in that same commit, the alloc_ctx and free_ctx members of scomp_alg may be randomized by structure layout randomization, since they are contained in a pure ops structure (containing only function pointers). If the pointers within scomp_alg are randomized, but those in crypto_acomp_streams are not, then the order may no longer match. This fixes the problem by removing the union from scomp_alg so that both crypto_acomp_streams and scomp_alg will share the same definition of alloc_ctx and free_ctx, ensuring they will always have the same layout. | ||||
| CVE-2025-40076 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: rcar-host: Pass proper IRQ domain to generic_handle_domain_irq() Starting with commit dd26c1a23fd5 ("PCI: rcar-host: Switch to msi_create_parent_irq_domain()"), the MSI parent IRQ domain is NULL because the object of type struct irq_domain_info passed to: msi_create_parent_irq_domain() -> irq_domain_instantiate()() -> __irq_domain_instantiate() has no reference to the parent IRQ domain. Using msi->domain->parent as an argument for generic_handle_domain_irq() leads to below error: "Unable to handle kernel NULL pointer dereference at virtual address" This error was identified while switching the upcoming RZ/G3S PCIe host controller driver to msi_create_parent_irq_domain() (which was using a similar pattern to handle MSIs (see link section)), but it was not tested on hardware using the pcie-rcar-host controller driver due to lack of hardware. [mani: reworded subject and description] | ||||
| CVE-2025-40089 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cxl/features: Add check for no entries in cxl_feature_info cxl EDAC calls cxl_feature_info() to get the feature information and if the hardware has no Features support, cxlfs may be passed in as NULL. [ 51.957498] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 51.965571] #PF: supervisor read access in kernel mode [ 51.971559] #PF: error_code(0x0000) - not-present page [ 51.977542] PGD 17e4f6067 P4D 0 [ 51.981384] Oops: Oops: 0000 [#1] SMP NOPTI [ 51.986300] CPU: 49 UID: 0 PID: 3782 Comm: systemd-udevd Not tainted 6.17.0dj test+ #64 PREEMPT(voluntary) [ 51.997355] Hardware name: <removed> [ 52.009790] RIP: 0010:cxl_feature_info+0xa/0x80 [cxl_core] Add a check for cxlfs before dereferencing it and return -EOPNOTSUPP if there is no cxlfs created due to no hardware support. | ||||
| CVE-2025-40092 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: Refactor bind path to use __free() After an bind/unbind cycle, the ncm->notify_req is left stale. If a subsequent bind fails, the unified error label attempts to free this stale request, leading to a NULL pointer dereference when accessing ep->ops->free_request. Refactor the error handling in the bind path to use the __free() automatic cleanup mechanism. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 Call trace: usb_ep_free_request+0x2c/0xec ncm_bind+0x39c/0x3dc usb_add_function+0xcc/0x1f0 configfs_composite_bind+0x468/0x588 gadget_bind_driver+0x104/0x270 really_probe+0x190/0x374 __driver_probe_device+0xa0/0x12c driver_probe_device+0x3c/0x218 __device_attach_driver+0x14c/0x188 bus_for_each_drv+0x10c/0x168 __device_attach+0xfc/0x198 device_initial_probe+0x14/0x24 bus_probe_device+0x94/0x11c device_add+0x268/0x48c usb_add_gadget+0x198/0x28c dwc3_gadget_init+0x700/0x858 __dwc3_set_mode+0x3cc/0x664 process_scheduled_works+0x1d8/0x488 worker_thread+0x244/0x334 kthread+0x114/0x1bc ret_from_fork+0x10/0x20 | ||||
| CVE-2025-40097 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: Fix missing pointer check in hda_component_manager_init function The __component_match_add function may assign the 'matchptr' pointer the value ERR_PTR(-ENOMEM), which will subsequently be dereferenced. The call stack leading to the error looks like this: hda_component_manager_init |-> component_match_add |-> component_match_add_release |-> __component_match_add ( ... ,**matchptr, ... ) |-> *matchptr = ERR_PTR(-ENOMEM); // assign |-> component_master_add_with_match( ... match) |-> component_match_realloc(match, match->num); // dereference Add IS_ERR() check to prevent the crash. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2025-40106 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: comedi: fix divide-by-zero in comedi_buf_munge() The comedi_buf_munge() function performs a modulo operation `async->munge_chan %= async->cmd.chanlist_len` without first checking if chanlist_len is zero. If a user program submits a command with chanlist_len set to zero, this causes a divide-by-zero error when the device processes data in the interrupt handler path. Add a check for zero chanlist_len at the beginning of the function, similar to the existing checks for !map and CMDF_RAWDATA flag. When chanlist_len is zero, update munge_count and return early, indicating the data was handled without munging. This prevents potential kernel panics from malformed user commands. | ||||
| CVE-2025-40120 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock Prevent USB runtime PM (autosuspend) for AX88772* in bind. usbnet enables runtime PM (autosuspend) by default, so disabling it via the usb_driver flag is ineffective. On AX88772B, autosuspend shows no measurable power saving with current driver (no link partner, admin up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering the PHY off on admin-down, not from USB autosuspend. The real hazard is that with runtime PM enabled, ndo_open() (under RTNL) may synchronously trigger autoresume (usb_autopm_get_interface()) into asix_resume() while the USB PM lock is held. Resume paths then invoke phylink/phylib and MDIO, which also expect RTNL, leading to possible deadlocks or PM lock vs MDIO wake issues. To avoid this, keep the device runtime-PM active by taking a usage reference in ax88772_bind() and dropping it in unbind(). A non-zero PM usage count blocks runtime suspend regardless of userspace policy (.../power/control - pm_runtime_allow/forbid), making this approach robust against sysfs overrides. Holding a runtime-PM usage ref does not affect system-wide suspend; system sleep/resume callbacks continue to run as before. | ||||
| CVE-2025-40131 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix peer lookup in ath12k_dp_mon_rx_deliver_msdu() In ath12k_dp_mon_rx_deliver_msdu(), peer lookup fails because rxcb->peer_id is not updated with a valid value. This is expected in monitor mode, where RX frames bypass the regular RX descriptor path that typically sets rxcb->peer_id. As a result, the peer is NULL, and link_id and link_valid fields in the RX status are not populated. This leads to a WARN_ON in mac80211 when it receives data frame from an associated station with invalid link_id. Fix this potential issue by using ppduinfo->peer_id, which holds the correct peer id for the received frame. This ensures that the peer is correctly found and the associated link metadata is updated accordingly. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 | ||||