Export limit exceeded: 88164 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (88164 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63923 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: validate body pcifunc in rvu_mbox_handler_rep_event_notify rvu_mbox_handler_rep_event_notify() in drivers/net/ethernet/marvell/ octeontx2/af/rvu_rep.c queues a sender-controlled REP_EVENT_NOTIFY request body verbatim, and rvu_rep_up_notify() then forwards event->pcifunc (the nested body field, distinct from the AF-normalised header pcifunc) into rvu_get_pfvf(), rvu_get_pf() and the AF->PF mailbox device index without any bounds check. A VF attached to a PF that has been put into switchdev representor mode reaches this path: the VF mailbox handler otx2_pfvf_mbox_handler() forwards every message id including MBOX_MSG_REP_EVENT_NOTIFY to AF without an allowlist, and the AF dispatcher rewrites only msg->pcifunc, leaving struct rep_event::pcifunc attacker-controlled. The sibling rvu_mbox_handler_esw_cfg() refuses requests whose header pcifunc is not rvu->rep_pcifunc; this handler has no equivalent gate. An out-of-range body pcifunc selects an &rvu->pf[]/&rvu->hwvf[] element past the allocated array and, for RVU_EVENT_MAC_ADDR_CHANGE, turns into a six-byte attacker-chosen OOB ether_addr_copy() target inside the queued worker; KASAN reports a slab-out-of-bounds write in rvu_rep_wq_handler. Reject malformed requests at the handler entry by gating on is_pf_func_valid(), which is already the canonical PF/VF range check in this driver; expose it via rvu.h so callers in rvu_rep.c can use it instead of open-coding the same range arithmetic. | ||||
| CVE-2026-63927 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: Fix use after free in debug code We're not allowed to dereference "urb" after calling usb_hcd_giveback_urb() so save the urb->status ahead of time. | ||||
| CVE-2026-63930 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: buffer: hw-consumer: fix use-after-free in error path In the err_put_buffers cleanup path of iio_hw_consumer_alloc(), the code was using list_for_each_entry() to iterate through buffers while calling iio_buffer_put() which can free the current buffer if refcount drops to 0. The list_for_each_entry() loop macro then evaluates buf->head.next to continue iteration, accessing the freed buffer. Fix this by using list_for_each_entry_safe(). | ||||
| CVE-2026-63941 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Correctly cap ZCR_EL2 provided by a guest hypervisor ZCR_EL2 can be updated by a VHE guest hypervisor either using ZCR_EL2 (which traps) or ZCR_EL1 (which does not trap). KVM handles both in different way: - on ZCR_EL2 trap, ZCR_EL2.LEN is immediately capped at the VM's own VL limit. This has the potential to break existing SW that relies on the full LEN field to be stateful. - on ZCR_EL1 access, we do absolutely nothing. On restoring the SVE context for an L2 guest, we directly restore the guest hypervisor's view of ZCR_EL2 into the physical ZCR_EL2. If the guest's view of the register was updated using the ZCR_EL2 accessor, the value has already been sanitised (with the caveat mentioned above). But if the guest used ZCR_EL1, the raw value is written into the HW, and the L2 guest can now access VLs that it shouldn't. Fix all the above by moving the VL capping to the restore points, ensuring that: - the HW is always programmed with a capped value, irrespective of the accessor being used, - the ZCR_EL2.LEN field is always completely stateful, irrespective of the accessor being used. Additionally, move ZCR_EL2 to be a sanitised register, ensuring that only the LEN field is actually stateful. This requires some creative construction of the RES0 mask, as the sysreg generation script does not yet generate RAZ/WI fields. [maz: rewrote commit message, tidy up access_zcr_el2()] | ||||
| CVE-2026-63952 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: memfd: deny writeable mappings when implying SEAL_WRITE When SEAL_EXEC is added, SEAL_WRITE is implied to make W^X. But the implied seal is set after the check that makes sure the memfd can not have any writable mappings. This means one can use SEAL_EXEC to apply SEAL_WRITE while having writeable mappings. This breaks the contract that SEAL_WRITE provides and can be used by an attacker to pass a memfd that appears to be write sealed but can still be modified arbitrarily. Fix this by adding the implied seals before the call for mapping_deny_writable() is done. | ||||
| CVE-2026-63954 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hpfs: fix a crash if hpfs_map_dnode_bitmap fails If hpfs_map_dnode_bitmap fails, the code would call hpfs_brelse4 on uninitialized quad buffer head, causing a crash. | ||||
| CVE-2026-63962 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: bound altmode_desc[] per iteration in svdm_consume_modes() svdm_consume_modes() checks pmdata->altmodes against the array size once before the loop over the count, but forgot to check the bound at every point in the loop. In the well-behaved SVDM discovery flow this is harmless because each of at most SVID_DISCOVERY_MAX SVIDs contributes at most MODE_DISCOVERY_MAX modes, exactly filling altmode_desc[ALTMODE_DISCOVERY_MAX]. But the CMDT_RSP_ACK handler in tcpm_pd_svdm() does not correlate an incoming ACK with any request the port actually sent. Once port->partner is set, an unsolicited Discover Modes ACK is consumed unconditionally. A broken or malicious port partner can therefore drive altmodes to ALTMODE_DISCOVERY_MAX - 1 via the normal flow, and then send one extra Discover Modes ACK with seven VDOs. Because the pre-loop check passes, the loop could then writes up to five entries past altmode_desc[]. For mode_data_prime the next field in struct tcpm_port is the partner_altmode[] pointer array, which then receives partner-chosen SVID/VDO bytes. Move the bound check inside the loop so the array can never be indexed past ALTMODE_DISCOVERY_MAX regardless of how many VDOs the partner supplies or how the function was reached. | ||||
| CVE-2026-63970 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: bind uarg before filling zerocopy skb virtio_transport_send_pkt_info() allocates or reuses the zerocopy uarg before entering the send loop, but virtio_transport_alloc_skb() still fills the skb before it inherits that uarg. When fixed-buffer vectored zerocopy hits MAX_SKB_FRAGS, io_sg_from_iter() may partially attach managed frags and return -EMSGSIZE. The rollback path call kfree_skb() to free an skb that carries SKBFL_MANAGED_FRAG_REFS but no uarg, so skb_release_data() falls through to ordinary frag unref. Pass the uarg into virtio_transport_alloc_skb() and bind it immediately before virtio_transport_fill_skb(). This keeps control or no-payload skbs untouched while ensuring success and rollback share one lifetime rule. | ||||
| CVE-2026-63971 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix race between sctp_wait_for_connect and peeloff sctp_wait_for_connect() drops and re-acquires the socket lock while waiting for the association to reach ESTABLISHED state. During this window, another thread can peeloff the association to a new socket via getsockopt(SCTP_SOCKOPT_PEELOFF), changing asoc->base.sk. After re-acquiring the old socket lock, sctp_wait_for_connect() returns success without noticing the migration — the caller then accesses the association under the wrong lock in sctp_datamsg_from_user(). Add the same sk != asoc->base.sk check that sctp_wait_for_sndbuf() already has, returning an error if the association was migrated while we slept. | ||||
| CVE-2026-63974 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close Since hci_dev_close_sync() can now be called during the reset path, we should also set HCI_CMD_DRAIN_WORKQUEUE. This avoids queuing timeouts while the hdev workqueue is being drained. | ||||
| CVE-2026-63976 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration success l2cap_ecred_reconf_rsp() returns early on success without clearing chan->ident. Every other L2CAP response handler (l2cap_ecred_conn_rsp, l2cap_le_connect_rsp, l2cap_config_rsp) clears chan->ident after a successful transaction to prevent the channel from matching subsequent responses with the recycled ident value. A remote attacker that completed a reconfiguration as the peer can replay a failure response with the stale ident, causing the kernel to match and destroy the already-established channel via l2cap_chan_del(chan, ECONNRESET). Clear chan->ident for all matching channels on success, and harden the failure path by using l2cap_chan_hold_unless_zero() consistent with other L2CAP handlers (l2cap_le_command_rej, __l2cap_get_chan_by_ident). | ||||
| CVE-2026-63985 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: eeprom: add more safeties to EEPROM Netlink fallback The Netlink fallback path for reading module EEPROM (fallback_set_params()) validates that offset < eeprom_len, but does not check that offset + length stays within eeprom_len. The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has always enforced both bounds: if (eeprom.offset + eeprom.len > total_len) return -EINVAL; This could lead to surprises in both drivers and device FW. Add the missing offset + length validation to fallback_set_params(), mirroring the ioctl. Similarly - ethtool core in general, and ethtool_get_any_eeprom() in particular tries to zero-init all buffers passed to the drivers to avoid any extra work of zeroing things out. eeprom_fallback() uses a plain kmalloc(), change it to zalloc. | ||||
| CVE-2026-47398 | 1 Mervinpraison | 1 Praisonai | 2026-07-21 | 8.1 High |
| PraisonAI is a multi-agent teams system. The v4.6.32 chokepoint refactor (which patched CVE-2026-44334 / GHSA-xcmw-grxf-wjhj) added the PRAISONAI_ALLOW_LOCAL_TOOLS env-var gate to the tool_override.py sinks. However, two additional spec.loader.exec_module call sites in praisonai/agents_generator.py were missed and remain completely unguarded in versions prior to 4.6.40. Both functions accept a module_path parameter sourced from YAML configuration and execute it without validation, signature checking, or the env-var gate. Version 4.6.40 fixes the issue. | ||||
| CVE-2026-64003 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues While a SCSI host is in a recovery state, scsi_mq_requeue_cmd() will not set the requeue list for a requeued command to be kicked in the future. The expectation is a call to scsi_run_host_queues() will kick all SCSI devices once the recovery state is cleared. However, scsi_run_host_queues() uses shost_for_each_device() which uses scsi_device_get() and so will ignore devices in a partially removed state like SDEV_CANCEL. But these devices may also have requeued requests, leaving their requests stuck from not being kicked and causing the removal process of the device to hang. scsi_run_host_queues() needs to run against more devices than the macro shost_for_each_device() allows. Instead of using the too limiting scsi_device_get() state checks, only ignore devices in SDEV_DEL state or when unable to acquire a reference. Attempt to run the queues for all other devices when scsi_run_host_queues() is called. | ||||
| CVE-2026-64005 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: Do not re-initialize smc hashtables INIT_HLIST_HEAD(&smc_v*_hashinfo.ht) are called after smc_nl_init(), proto_register() and sock_register(). This can lead to smc_v*_hashinfo.ht being reset even though hash entries already exist and are being used, possibly resulting in a corrupted list. Remove unnecessary and dangerous re-initialisation of smc_v*_hashinfo.ht in smc_init(); it is implicitly initialised to zero anyhow. Add HLIST_HEAD_INIT to the definitions for clarity. | ||||
| CVE-2026-64008 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: fix UAF via dangling GEM handle in create_bo rocket_ioctl_create_bo() inserts a GEM handle into the file's IDR via drm_gem_handle_create() early on, then performs several operations that can fail (sgt allocation, drm_mm insert, iommu_map). If any fail after the handle is live, the error path calls drm_gem_shmem_object_free() which kfree's the object without removing the handle from the IDR. This leaves a dangling handle pointing to freed slab memory. Any subsequent ioctl using that handle (PREP_BO, FINI_BO, SUBMIT) calls drm_gem_object_lookup() and dereferences freed memory (UAF). Fix by moving drm_gem_handle_create() to after all fallible operations succeed, matching the pattern used by panfrost, lima, and etnaviv. Also fix drm_mm_insert_node_generic() whose return value was silently overwritten by iommu_map_sgtable() on the next line. Add the missing error check. [tomeu: Move handle creation to the very end] | ||||
| CVE-2026-64017 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: pop cached request if it is usable When submitting a bio to blk-mq, if the task should sleep after peeking a cached request, but before it pops it, the plug flushes and calls blk_mq_free_plug_rqs, freeing the cached_rqs. This creates a use-after-free bug. Fix this by popping the cached request before any possible blocking calls if it is suitable for use. Popping this request first holds a queue reference, so avoid any serialization races with queue freezes and can safely proceed with dispatching that request to the driver. This potentially increases a timing window from when a driver wants to freeze its queue to when requests stop being dispatched. That scenario is off the fast path though, and drivers need to appropriately handle requests during a freeze request anyway. The downside is the popped element needs to be individually freed when we performed a bio plug merge. The cached request would have had to be freed later anyway, but this patch does it inline with building the plug list instead of after flushing it. | ||||
| CVE-2026-64030 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: bounds-check link_id in ieee80211_ml_epcs IEEE80211_MLE_STA_EPCS_CONTROL_LINK_ID is 0x000f, so link_id extracted from a PRIO_ACCESS ML element PER_STA_PROFILE subelement can be 0..15. sdata->link[] has IEEE80211_MLD_MAX_NUM_LINKS (15) entries (indices 0..14), making index 15 out-of-bounds. A connected WiFi 7 AP can trigger this by sending an EPCS Enable Response action frame with a PER_STA_PROFILE subelement where link_id = 15. The unsolicited-notification path (dialog_token = 0) is reachable any time EPCS is already enabled, without any prior client request. sdata->link[15] reads into the first word of sdata->activate_links_work (a wiphy_work whose embedded list_head is non-NULL after INIT_LIST_HEAD), so the NULL check on the result does not catch the invalid access. The garbage pointer is then passed to ieee80211_sta_wmm_params(), which dereferences link->sdata and crashes the kernel. The same class of bug was fixed for ieee80211_ml_reconfiguration() by commit 162d331d833d ("wifi: mac80211: bounds-check link_id in ieee80211_ml_reconfiguration"). | ||||
| CVE-2026-64031 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix managed cache race for unaligned extents After unaligned compressed extents were introduced, the following race could occur: [Thread 1] [Thread 2] (z_erofs_fill_bio_vec) <handle a Z_EROFS_PREALLOCATED_FOLIO folio> ... filemap_add_folio (1) (z_erofs_bind_cache) <the same folio is found..> .. .. folio_attach_private (2) filemap_add_folio (3) again Since (1) is executed but (2) hasn't been executed yet, it's possible that another thread finds the same managed folio in z_erofs_bind_cache() for a different pcluster and calls filemap_add_folio() again since folio->private is still Z_EROFS_PREALLOCATED_FOLIO. Fix this by explicitly clearing folio->private before making the folio visible in the managed cache so that another pcluster can simply wait on the locked managed folio as what we did for other shared cases [1]. This only impacts unaligned data compression (`-E48bit` with zstd, for example). [1] Commit 9e2f9d34dd12 ("erofs: handle overlapped pclusters out of crafted images properly") was originally introduced to handle crafted overlapped extents, but it addresses unaligned extents as well. | ||||
| CVE-2026-64036 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cgroup/rstat: validate cpu before css_rstat_cpu() access css_rstat_updated() is exposed as a BPF kfunc and accepts a caller-provided cpu argument. The function uses cpu for per-cpu rstat lookups without checking whether it refers to a valid possible CPU. A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass an invalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu == 0x7fffffff triggers: UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9 index 2147483647 is out of range for type 'long unsigned int [64]' Call Trace: css_rstat_updated bpf_iter_run_prog cgroup_iter_seq_show bpf_seq_read Add cpu validation to the BPF-facing css_rstat_updated() kfunc and move the common implementation to __css_rstat_updated() for in-kernel callers. | ||||