Export limit exceeded: 363555 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (363555 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-56015 | 2026-07-06 | 9.1 Critical | ||
| Net::IP::LPM versions through 1.10 for Perl allow a heap out-of-bounds read via an unbounded prefix length. add() passes the prefix string to the trie builder addPrefixToTrie() without checking it against the address width. addPrefixToTrie() then walks the prefix buffer by prefix_length bits, reading prefix[byte] for byte up to prefix_len/8, where prefix is the 4-byte (IPv4) or 16-byte (IPv6) packed address. A prefix length greater than 32 for IPv4 or 128 for IPv6, for example add("1.2.3.4/255", $v) or add("2001:db8::/255", $v), reads past the end of the packed address. The out-of-bounds read happens during trie construction and is bounded: the prefix length is stored as an unsigned char, so the bit walk reads at most 32 bytes from the start of the packed address, a short distance past the end of the 4-byte or 16-byte buffer. It is detectable under AddressSanitizer, valgrind, or a hardened allocator, where it can abort the process. Lookups and dump() format only the valid address width, so the out-of-bounds bytes are not exposed through the module's API. | ||||
| CVE-2026-46468 | 1 Dell | 1 Powerprotect Data Domain | 2026-07-06 | 4.4 Medium |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an improper link resolution before file access ('Link following') vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to information exposure. | ||||
| CVE-2026-46466 | 1 Dell | 1 Powerprotect Data Domain | 2026-07-06 | 2.7 Low |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an use of less trusted source vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to information tampering. | ||||
| CVE-2026-49815 | 1 Dell | 1 Powerprotect Data Domain | 2026-07-06 | 7.2 High |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an improper neutralization of special Elements used in an OS command ('OS command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to execution of arbitrary OS commands. | ||||
| CVE-2026-14613 | 1 Redhat | 4 Build Keycloak, Jboss Data Grid, Jbosseapxp and 1 more | 2026-07-06 | 4.3 Medium |
| A vulnerability was discovered in Keycloak's administrative interface that allows certain administrators to see information about groups they shouldn't have access to. When the new Fine-Grained Admin Permissions (FGAP v2) are turned on, an administrator who is allowed to see a specific "role" can also see a list of all groups assigned to that role. The system fails to check if the administrator has permission to see those specific groups. This could allow a restricted administrator to discover "hidden" groups and see their details, such as internal names and custom settings, which might contain sensitive deployment information. | ||||
| CVE-2026-14614 | 1 Redhat | 4 Build Keycloak, Jboss Data Grid, Jbosseapxp and 1 more | 2026-07-06 | 5.4 Medium |
| A flaw was found in the ClientResource component of Keycloak's admin services when Fine-Grained Admin Permissions (FGAP) v2 is enabled. This issue allows a delegated administrator, who should only have limited control over specific clients, to attach or remove hidden client scopes that they are not authorized to see or manage. As a result, an attacker could inject unauthorized data or permissions into the security tokens issued to end-users, potentially tricking other applications into granting higher levels of access than intended. | ||||
| CVE-2026-40257 | 2026-07-06 | 5.5 Medium | ||
| OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 3.21.0 and prior to version 4.11.0, the ARM Crypto Extensions accelerated SHA-3 implementation has an off-by-one error that can cause a massive heap overflow that corrupts all TEE kernel memory following the hash state. This affects all platforms built with `CFG_CRYPTO_WITH_CE82=y` (ARMv8.2+ with SHA3 Crypto Extensions). Version 4.11.0 contains a patch. As a workaround, disable SHA3 Crypto Extensions with `CFG_CRYPTO_WITH_CE82=n`. | ||||
| CVE-2026-48316 | 1 Adobe | 1 Coldfusion | 2026-07-06 | 10 Critical |
| ColdFusion versions 2025.9, 2023.20 and earlier are affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue does not require user interaction. Scope is changed. | ||||
| CVE-2026-40141 | 1 Beyondtrust | 2 Privileged Remote Access, Remote Support | 2026-07-06 | N/A |
| A high-severity vulnerability exists in a web application component of BeyondTrust Remote Support and Privileged Remote Access related to the processing of certain input parameters. Insufficient validation of user-supplied input may allow an authenticated attacker with limited privileges to access unintended resources or data beyond their authorization scope. Exploitation is restricted to accounts with specific permissions. | ||||
| CVE-2026-14074 | 1 Google | 1 Chrome | 2026-07-06 | 6.5 Medium |
| Side-channel information leakage in WebAuthentication in Google Chrome on iOS prior to 150.0.7871.47 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Low) | ||||
| CVE-2026-40140 | 1 Beyondtrust | 2 Privileged Remote Access, Remote Support | 2026-07-06 | N/A |
| BeyondTrust Remote Support and Privileged Remote Access contain a high-severity pre-authentication vulnerability in the network communication subsystem. Insufficient validation of client-supplied input may allow an unauthenticated remote attacker to trigger a denial-of-service condition affecting appliance availability. | ||||
| CVE-2026-40139 | 1 Beyondtrust | 2 Privileged Remote Access, Remote Support | 2026-07-06 | N/A |
| A critical pre-authentication vulnerability exists in the authentication subsystem of BeyondTrust Remote Support. Improper processing of authentication requests may allow an unauthenticated remote attacker to bypass access controls and gain unauthorized access to the appliance, including accounts with elevated privileges. Exploitation requires a specific authentication configuration to be enabled. | ||||
| CVE-2026-54291 | 2026-07-06 | N/A | ||
| pgjdbc is an open source postgresql JDBC Driver. In releases 42.7.4 through 42.7.11, channelBinding=require connections can be silently downgraded from SCRAM-SHA-256-PLUS with channel binding to plain SCRAM-SHA-256 without it, losing the man-in-the-middle protection the setting is meant to guarantee. An attacker who can intercept the TLS connection can trigger the downgrade with a certificate whose signature algorithm has no tls-server-end-point channel-binding hash, because the bundled com.ongres.scram:scram-client returns an empty byte array instead of failing and pgJDBC ScramAuthenticator checks only that the server advertised a PLUS mechanism, without rejecting the empty binding or checking that the negotiated mechanism uses channel binding. This issue is fixed in version 42.7.12. | ||||
| CVE-2026-40138 | 1 Beyondtrust | 2 Privileged Remote Access, Remote Support | 2026-07-06 | N/A |
| A critical pre-authentication vulnerability exists in the authentication subsystem of BeyondTrust Remote Support and Privileged Remote Access. Improper validation of authentication data may allow a network-positioned attacker to bypass access controls and gain unauthorized access to the appliance, including accounts with elevated privileges. Exploitation requires a specific authentication configuration to be enabled | ||||
| CVE-2026-1433 | 2026-07-06 | N/A | ||
| uniFLOW Universal Login Manager (ULM) Standalone contains an information disclosure vulnerability that may allow an authenticated administrator to access sensitive configuration information through the ULM Remote User Interface (RUI). Exploitation requires administrative privileges and may disclose configuration data associated with SMTP or LDAP integrations. ULM deployments connected to uniFLOW Server or uniFLOW Online are not affected. | ||||
| CVE-2026-13708 | 2026-07-06 | 7.5 High | ||
| Imager::File::JPEG versions before 1.003 for Perl leak heap memory when reading a JPEG with repeated APP13 markers in i_readjpeg_wiol. i_readjpeg_wiol walks the marker list libjpeg returns and, for each APP13 marker, allocates a new buffer with *iptc_itext = mymalloc(...) and overwrites the previous pointer without freeing it. Only the final payload is later turned into a Perl scalar and freed, so a JPEG with N such markers leaks the first N-1 payloads on every read. In a long-lived process, such as an upload or thumbnailing service, repeated reads accumulate these leaks and exhaust available memory, a denial of service. The same handler ships bundled in the Imager distribution, where versions before 1.032 are affected and the fix ships in 1.032. | ||||
| CVE-2026-44934 | 1 Suse | 1 Rancher | 2026-07-06 | N/A |
| A information disclosure when DEBUG loglevel is set in SUSE Rancher AI Agent 1.0 before 1.0.2 could leak API keys or LLM response text with potential sensitive data into logfiles, allowing local attackers to misuse respective gained data or credentials. | ||||
| CVE-2026-10656 | 1 Zephyrproject | 1 Zephyr | 2026-07-06 | 4.6 Medium |
| The MAX32xxx USB device controller driver (drivers/usb/udc/udc_max32.c, compatible adi_max32_usbhs) dereferenced an endpoint buffer in its OUT and IN transfer-completion handlers without checking it for NULL. udc_event_xfer_out_done() called net_buf_add(buf, ep_request->actlen) immediately after buf = udc_buf_get(ep_cfg), where udc_buf_get() returns NULL when the endpoint FIFO is empty. A transfer-completion event is queued from interrupt context and processed asynchronously by the driver thread; between queuing and processing, the endpoint FIFO can be drained by host-controlled control flow — in particular udc_setup_received() drains the EP0 OUT/IN FIFOs whenever a new SETUP packet arrives, and dequeue/disable/purge paths drain it likewise. A USB host that aborts an in-flight EP0 control transfer with a new SETUP packet (legal USB behavior) can therefore cause a stale XFER_OUT_DONE event to be processed against an empty FIFO, producing net_buf_add(NULL, ...), a near-NULL pointer dereference that faults and crashes the device. No authentication is required; the attacker is the USB host the device is connected to (physical bus access). Impact is denial of service (device crash). The defect was introduced when the MAX32 UDC driver was added and shipped in Zephyr v4.4.0. The fix adds NULL-buffer checks that return early with UDC_EVT_ERROR/-ENOBUFS in both the OUT-done and IN-done handlers. | ||||
| CVE-2026-55379 | 2026-07-06 | 7.5 High | ||
| Pillow is a Python imaging library. Prior to 12.3.0, PIL/BdfFontFile.py bdf_char() read the BBX width and height field from a BDF font file and passed attacker-controlled dimensions to Image.new() without calling Image._decompression_bomb_check(), bypassing Pillow's documented decompression bomb protection and allowing excessive memory allocation. This issue is fixed in version 12.3.0. | ||||
| CVE-2026-10657 | 1 Zephyrproject | 1 Zephyr | 2026-07-06 | 3.7 Low |
| Zephyr's DNS resolver detects mDNS (.local) queries in dns_resolve_name_internal() (subsys/net/lib/dns/resolve.c) with memcmp(strrchr(query, '.'), ".local", 7), which always reads a fixed 7 bytes from the suffix pointer. When the resolved hostname's final label is shorter than 7 bytes (e.g. names ending in .org, .com, .net, .io, or a trailing dot), the comparison reads 1-2 bytes past the string's NUL terminator. The hostname (query) is the caller-supplied name passed through the standard getaddrinfo()/dns_get_addr_info()/dns_resolve_name() path and is influenceable by operators or remote inputs (server names from configuration, parsed URLs, or app-facing interfaces). On a tightly-sized buffer with no slack (for example a userspace getaddrinfo call where the hostname is copied with k_usermode_string_alloc_copy to exactly strlen+1 bytes), the over-read crosses the allocation boundary; if that boundary is unmapped (guard page, memory-domain boundary under MPU, or an address sanitizer) the over-read faults, causing a denial of service. The over-read bytes are never returned, so there is no information disclosure. The flaw is compiled only when CONFIG_MDNS_RESOLVER is enabled, exists since v1.10.0, and is fixed by replacing the fixed-length memcmp with a NUL-safe strcmp(ptr, ".local"). | ||||