Export limit exceeded: 378477 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 378477 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378477 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74545 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: rtase: fix double free of multi-frag skb on DMA map failure In rtase_start_xmit(), when the head buffer DMA mapping fails after rtase_xmit_frags() has mapped all fragments, the error path clears the fragment descriptors with rtase_tx_clear_range(), which frees the skb through the last-frag slot and accounts tx_dropped. Control then falls through to the common error label, which frees the same skb a second time and counts it again. Return right after clearing the fragments when the skb owns frags; the no-frag case still drops through and frees the head skb once. | ||||
| CVE-2026-74544 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: validate offshift to prevent shift-out-of-bounds u32_change() copies the user-provided tc_u32_sel.offshift (unsigned char, 0-255) into the kernel knode object without bounds validation. When a packet later hits u32_classify() with TC_U32_VAROFFSET set, it evaluates `ntohs(offmask & *data) >> offshift` where the left operand is a 16-bit value promoted to a 32-bit int. Any offshift >= 32 is undefined behavior per C11 6.5.7p3, triggerable by an unprivileged user via user/network namespaces. UBSAN: shift-out-of-bounds in net/sched/cls_u32.c:236:43 shift exponent 32 is too large for 32-bit type int Fix this by rejecting offshift >= 16 during filter creation in u32_change(). | ||||
| CVE-2026-74541 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: clear iso_data always when detaching conn from hcon When setting conn->hcon = NULL, also conn->hcon->iso_data = NULL is necessary, otherwise later iso_conn_free() will UAF. Fix clearing of iso_data in iso_sock_disconn() Fixes KASAN: slab-use-after-free in iso_conn_hold_unless_zero on iso_sock_release() followed by hci_abort_conn_sync(). | ||||
| CVE-2026-74540 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix UAF in l2cap_le_connect_rsp l2cap_le_connect_rsp() obtains a channel via __l2cap_get_chan_by_ident() but neither holds a reference nor uses l2cap_chan_hold_unless_zero() before locking and operating on it. A concurrent l2cap_chan_del() triggered by a remote disconnect can free the channel between the lookup and l2cap_chan_lock(), causing a use-after-free. The BR/EDR counterpart l2cap_connect_rsp() and the sibling handler l2cap_le_command_rej() already use l2cap_chan_hold_unless_zero() to safely hold a reference, but l2cap_le_connect_rsp() was left unprotected. Fix by adding l2cap_chan_hold_unless_zero() after the ident lookup and l2cap_chan_put() on the exit path, consistent with other L2CAP response handlers. | ||||
| CVE-2026-74539 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: lock sk in iso_sock_getname Accessing iso_pi(sk)->conn requires lock_sock, which is not held here. Fix by adding the lock/release. | ||||
| CVE-2026-74538 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: lock sk in iso_connect_ind Accessing iso_pi(sk)->conn requires lock_sock, which is not taken in the "ev3" part of iso_connect_ind. It may also be NULL if socket has transitioned away from the LISTEN/CONNECT states before locking. Fix by adding lock/release. Recheck hcon is valid after lock acquire where needed. | ||||
| CVE-2026-74537 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: hold sk properly in iso_conn_ready sk deref in iso_conn_ready must be done either under conn->lock, or holding a refcount, to avoid concurrent close. conn->sk is currently accessed without either: [Task 1] [Task 2] iso_sock_release iso_conn_ready sk = conn->sk lock_sock(sk) conn->sk = NULL lock_sock(sk) release_sock(sk) iso_sock_kill(sk) UAF on sk deref Fix possible UAF by holding sk refcount in iso_conn_ready(). Also recheck after lock_sock that the socket is still valid. Adjust locking so conn->sk is cleared only under lock_sock. | ||||
| CVE-2026-74535 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: avoid deadlocks in iso_sock_timeout iso_sock_timeout() takes lock_sock, so sync disabling the timer while holding that lock may deadlock. iso_sock_timeout() may also run concurrently with iso_conn_del(), which leads to UAF [Task 1] [Task hdev->workqueue] iso_sock_timeout iso_conn_del iso_conn_hold_unless_zero iso_chan_del `------------> iso_conn_put caller frees hcon iso_conn_put iso_conn_free conn->hcon->iso_data = NULL; /* UAF */ Fix the deadlock by removing the disable from the lock_sock sections. Move the timer from iso_conn to iso_pinfo to decouple it from iso_conn which may need to be freed in lock_sock section. Convert some of the clear_timer to disable_timer. | ||||
| CVE-2026-74534 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix refcounting of iso_conn iso_conn_del() and iso_chan_del() have a race that results to double-put of iso_conn: [Task hdev->workqueue] [Task 2] iso_conn_del iso_chan_del iso_conn_hold_unless_zero iso_conn_lock iso_conn_lock conn->sk = NULL iso_conn_unlock sk = iso_sock_hold(conn) <---------´ if (!sk) iso_conn_put iso_conn_put iso_conn_put /* UAF */ The extra put for !sk in iso_conn_del() is currently required since failing iso_chan_add() may leave iso_conn not associated with any sk. Fix by having iso_pi(sk)->conn own refcount when non-NULL, so iso_conn_del does not need to put it. Adjust the iso_conn_add() refcounting so that conn is put if it does not get associated with an sk. | ||||
| CVE-2026-74533 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix race of kfree vs kref_get_unless_zero hci_conn::iso_data is accessed and modified without lock or RCU. This leads to a race [Task hdev->workqueue] [Task 2] iso_recv iso_conn_put(conn) conn = LOAD hcon->iso_data iso_conn_free(conn) iso_conn_hold_unless_zero(conn) hcon->iso_data = NULL kfree(conn) kref_get_unless_zero(&conn->ref) /* UAF */ and also to races in iso_conn_add() vs. iso_conn_free(). Fix by adding spinlock hci_conn::proto_lock and using it to guard hci_conn::iso_data. | ||||
| CVE-2026-74531 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: hold conn reference in abort_conn_sync() There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that. | ||||
| CVE-2026-74530 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: hold conn in hci_connect_big_sync() callback There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that. Handle NULL hcon, return 0 + do nothing to match the previous behavior. | ||||
| CVE-2026-74529 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: hold conn in hci_connect_pa_sync() callback There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that. | ||||
| CVE-2026-74528 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: hold conn in hci_past_sync() callback Avoids giving freed pointers to hci_conn_valid(), which kmalloc may have reused. Hold refcount to avoid that. | ||||
| CVE-2026-74527 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Block VFs from clobbering special CGX PKIND state PF and VF NIX LFs that share a CGX LMAC reuse the same hardware PKIND programming. When HiGig2 or EDSA parsing is enabled, a VF NIX LF alloc must not reset the LMAC RX PKIND or default TX parse config over the PF setup. Add cgx_get_pkind() and rvu_cgx_is_pkind_config_permitted() so VFs skip cgx_set_pkind(), rvu_npc_set_pkind(), and NIX_AF_LFX_TX_PARSE_CFG updates when the LMAC is using NPC_RX_HIGIG_PKIND or NPC_RX_EDSA_PKIND. | ||||
| CVE-2026-74523 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: qede: sync udp_tunnel ports outside qede_lock in the recovery path A TX timeout on a qede NIC that has VXLAN/GENEVE tunnel ports configured wedges the rtnetlink control plane of the whole machine: NETDEV WATCHDOG: ens6f1 (qede): transmit queue 2 timed out 10226 ms [qede_tx_timeout:586(ens6f1)]TX timeout on queue 2! [qede_recovery_handler:2665(ens6f0)]Starting a recovery process The recovery path deadlocks on the driver's own mutex: qede_sp_task rtnl_lock() mutex_lock(&edev->qede_lock) <- taken qede_recovery_handler qede_load udp_tunnel_nic_reset_ntf __udp_tunnel_nic_device_sync info->sync_table == qede_udp_tunnel_sync mutex_lock(&edev->qede_lock) <- same task: deadlock The mutex is not recursive, so the kworker blocks on itself with rtnl_lock held, and neither lock is ever released. Every task that calls rtnl_lock() afterwards (ip, ovs-vswitchd, lldpad, IPv6 addrconf, sshd) blocks forever while the node still answers ping. In a vmcore from an affected production node rtnl_mutex.owner decodes to the very kworker blocked at the innermost mutex_lock() above. Re-sync the tunnel ports from qede_sp_task() after the internal lock is dropped, still under rtnl_lock as the udp_tunnel API requires. This mirrors qede_open(), which calls udp_tunnel_nic_reset_ntf() under rtnl without the internal lock. qede_recovery_handler() now returns whether it has successfully reloaded an open device, and the caller re-syncs the ports only in that case. This keeps the old gating exactly: a device that was down or a failed recovery returns false, as those paths never reached the udp_tunnel_nic_reset_ntf() call before either. This was the only user of the qede_lock()/qede_unlock() helpers, so remove them. | ||||
| CVE-2026-74522 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in __close_file_table_ids() A ksmbd_file can remain alive after logical close while another session holds a temporary reference obtained through ksmbd_lookup_fd_inode(). ksmbd_close_fd() currently marks the file closed and drops the idr-owned reference, but leaves the pointer published in the closing session's idr until the final reference is dropped. If the foreign holder performs the final ksmbd_fd_put(), __put_fd_final() supplies the foreign session's file table to __ksmbd_close_fd(). The object is then freed without being removed from its owner's idr, and the owner session later dereferences the stale pointer during file-table teardown. Remove the volatile id from the owner's idr while ksmbd_close_fd() still holds that table's lock, and clear volatile_id before dropping the idr-owned reference. A later foreign final put then only performs physical destruction and cannot remove the object from the wrong table. | ||||
| CVE-2026-74521 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: use memcmp() to compare ClientGUIDs ClientGUID is a fixed-size binary value and can contain embedded NUL bytes. strncmp() stops comparing at the first NUL byte, so different ClientGUID values can incorrectly be treated as equal. Use memcmp() in SMB3 multichannel session binding and FSCTL_VALIDATE_NEGOTIATE_INFO to compare all SMB2_CLIENT_GUID_SIZE bytes. | ||||
| CVE-2026-74520 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/iommufd: Fix IOPF group ownership UAF iopf_group_alloc() links each last-page IOPF group into the generic IOPF pending list before invoking the domain fault handler. iommufd_fault_iopf_handler() also queued an accepted group in the IOMMUFD deliver list without removing it from the generic pending list. When detach or HWPT replacement drops the device's IOPF reference count to zero, an IOMMU driver may call iopf_queue_remove_device(). That function responds to and frees groups through the generic pending list without removing the same groups from IOMMUFD's deliver list or response xarray. A later read, response, or cleanup can then access the freed group and cause a UAF. Fix this by dequeuing an accepted group from the generic pending list before IOMMUFD queues it for userspace response. Make iopf_group_response() send a response regardless of pending-list membership, so the dequeued group can still be completed by IOMMUFD. | ||||
| CVE-2026-74519 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: devicetree: don't free uninitialized dev_name on error path dt_remember_or_free_map() duplicates dev_name for each map entry. If kstrdup_const() fails, dt_free_map() frees dev_name in all num_maps entries, including entries that have not been initialized. Some pinctrl drivers, including pinctrl-imx, allocate the map with kmalloc() and leave dev_name for the core to initialize. The untouched entries therefore contain uninitialized data which is passed to kfree_const(). Reproduced on qemu's mcimx6ul-evk (pinctrl-imx) with failslab injection while binding the pinctrl-consuming device, under KASAN: BUG: KASAN: double-free in dt_free_map+0x34/0xa4 Free of addr c425a900 by task init/1 kfree from dt_free_map+0x34/0xa4 dt_free_map from dt_remember_or_free_map+0x184/0x198 dt_remember_or_free_map from pinctrl_dt_to_map+0x33c/0x4c8 pinctrl_dt_to_map from create_pinctrl+0x9c/0x5c0 Initialize all dev_name fields to NULL before duplicating the device name, making the full-map cleanup safe after a partial failure. | ||||