Export limit exceeded: 372505 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 372505 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 372505 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (372505 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64231 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/dsi: don't dump registers past the mapped region On DSI 6G platforms the IO address space is internally adjusted by io_offset. Later this adjusted address might be used for memory dumping. However the size that is used for memory dumping isn't adjusted to account for the io_offset, leading to the potential access to the unmapped region. Lower ctrl_size by the io_offset value to prevent access past the mapped area. msm_disp_snapshot_add_block+0x1d4/0x3c8 [msm] (P) msm_dsi_host_snapshot+0x4c/0x78 [msm] msm_dsi_snapshot+0x28/0x50 [msm] msm_disp_snapshot_capture_state+0x74/0x140 [msm] msm_disp_snapshot_state_sync+0x60/0x90 [msm] _msm_disp_snapshot_work+0x30/0x90 [msm] kthread_worker_fn+0xdc/0x460 kthread+0x120/0x140 Patchwork: https://patchwork.freedesktop.org/patch/721747/ | ||||
| CVE-2026-64235 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/ftrace: Relocate %rip-relative percpu refs in dynamic trampolines With CONFIG_CALL_DEPTH_TRACKING enabled on an x86 retbleed-affected platform (eg: Skylake), with retbleed=stuff, registering a dynamic ftrace trampoline crashes on the first call into the traced function: BUG: unable to handle page fault for address: ffff88817ae18880 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 4b53067 P4D 4b53067 PUD 0 Oops: Oops: 0002 [#1] SMP PTI CPU: 3 UID: 0 PID: 187 Comm: usleep Not tainted 7.0.10 #243 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 Code: 24 78 00 00 00 00 48 89 ea 48 89 54 24 20 48 8b b4 24 b8 00 00 00 48 8b bc 24 b0 00 00 00 48 89 bc 24 80 00 00 00 48 83 ef 05 <65> 48 c1 3d 1f a8 b6 02 05 48 8b 15 f6 00 00 00 4c 89 3c 24 4c 89 Call Trace: <TASK> ? find_held_lock ? exc_page_fault ? lock_release ? __x64_sys_clock_nanosleep ? lockdep_hardirqs_on_prepare ? trace_hardirqs_on __x64_sys_clock_nanosleep do_syscall_64 ? exc_page_fault ? call_depth_return_thunk entry_SYSCALL_64_after_hwframe ... Kernel panic - not syncing: Fatal exception This small reproducer allows to easily trigger the crash: # echo 'p __x64_sys_clock_nanosleep' > /sys/kernel/tracing/kprobe_events # echo 1 > /sys/kernel/tracing/events/kprobes/p___x64_sys_clock_nanosleep_0/enable # usleep 1 Monitoring the crash under GDB points to the exact instruction in charge of incrementing the call depth: sarq $5, %gs:__x86_call_depth(%rip) This instruction matches the one inserted by the ftrace_regs_caller from ftrace_64.S. This emitted code was likely working fine until the introduction of 59bec00ace28 ("x86/percpu: Introduce %rip-relative addressing to PER_CPU_VAR()"): it has made the call depth accounting addressing relative to $rip, instead of being based on an absolute address. As this code exact location depends on where the trampoline lives in memory, the corresponding displacement needs to be adjusted at runtime to actually correctly find the per-cpu __x86_call_depth value, otherwise the targeted address is wrong, leading to the page fault seen above. Fix the %rip-relative displacement of the copied CALL_DEPTH_ACCOUNT instruction (from ftrace_regs_caller) by calling text_poke_apply_relocation(), as it is done for example by the x86 BPF JIT compiler through x86_call_depth_emit_accounting(). This corrects both CALL_DEPTH_ACCOUNT slots, in ftrace_caller and ftrace_regs_caller. [ bp: Massage. ] | ||||
| CVE-2026-64248 | 1 Linux | 1 Linux Kernel | 2026-08-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: smp: report dying CPU to RCU in stop_this_cpu() smp_send_stop() parks all secondary CPUs in stop_this_cpu(). The function marks the CPU offline for the scheduler via set_cpu_online(false) but never informs RCU, so RCU keeps expecting a quiescent state from CPUs that are now spinning forever with interrupts disabled. As long as nothing waits for an RCU grace period after smp_send_stop() this is harmless, which is why it went unnoticed. Since commit 91840be8f710 ("irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT") however, irq_work_sync() calls synchronize_rcu() on architectures without an irq_work self-IPI, i.e. where arch_irq_work_has_interrupt() returns false. That is the asm-generic default used by MIPS. Any irq_work_sync() issued in the reboot/shutdown path after smp_send_stop() then blocks on a grace period that can never complete, hanging the reboot: WARNING: CPU: 0 PID: 15 at kernel/irq_work.c:144 irq_work_queue_on ... rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: Offline CPU 1 blocking current GP. rcu: Offline CPU 2 blocking current GP. rcu: Offline CPU 3 blocking current GP. This issue was noticed on several Realtek MIPS switch SoCs (MIPS interAptiv) and came up during kernel bump downstream in OpenWrt from 6.18.33 to 6.18.34, after the backport of the patch to the 6.18 stable branch. The patch also has been backported all the way back to 6.1. Call rcutree_report_cpu_dead() once interrupts are disabled, mirroring the generic CPU-hotplug offline path, so RCU stops waiting on the parked CPUs and grace periods can still complete. MIPS shuts down all CPUs here without going through the CPU-hotplug mechanism, so this report is not otherwise issued. Reporting a dying CPU to RCU outside the regular hotplug offline path is not unprecedented: arm64 does the same in cpu_die_early(). There it is an exception for a CPU that was coming online and is aborting bringup, rather than the default shutdown action as on MIPS. | ||||
| CVE-2026-64249 | 1 Linux | 1 Linux Kernel | 2026-08-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fpga: region: fix use-after-free in child_regions_with_firmware() Move of_node_put(child_region) after the error print to avoid accessing freed memory when pr_err() references child_region. [ Yilun: Fix the Fixes tag ] | ||||
| CVE-2026-64252 | 1 Linux | 1 Linux Kernel | 2026-08-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: DEC: Prevent initial console buffer from landing in XKPHYS In 64-bit configurations calling the initial console output handler from a kernel thread other than the initial one will result in a situation where the stack has been placed in the XKPHYS 64-bit memory segment and consequently so has been the buffer allocated there that is used as the argument corresponding to the `%s' output conversion specifier for the firmware's printf() entry point. This 64-bit address will then be truncated by 32-bit firmware, resulting in an attempt to access the wrong memory location, which in turn will cause all kinds of unpredictable behaviour, such as a kernel crash: Console: colour dummy device 160x64 Calibrating delay loop... 49.36 BogoMIPS (lpj=192512) pid_max: default: 32768 minimum: 301 CPU 0 Unable to handle kernel paging request at virtual address 000000000203bd00, epc == ffffffffbfc08364, ra == ffffffffbfc08800 Oops[#1]: CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0-rc2-00254-gfb649bda6f56-dirty #121 $ 0 : 0000000000000000 0000000000000001 0000000000000023 ffffffff80684ba0 $ 4 : 000000000203bd00 ffffffffbfc0f3b4 ffffffffffffffff 0000000000000073 $ 8 : 0a303d7469000000 0000000000000000 0000000000000073 ffffffffbfc0f473 $12 : 0000000000000002 0000000000000000 ffffffff80684c1c 0000000000000000 $16 : 0000000000000000 ffffffff80596dc9 0000000000000000 ffffffffbfc09240 $20 : ffffffff80684c40 ffffffffbfc0f400 000000000000002d 000000000000002b $24 : ffffffffffffffbf 000000000203bd00 $28 : ffffffff805f0000 ffffffff80684b58 0000000000000030 ffffffffbfc08800 Hi : 0000000000000000 Lo : 0000000000000aa8 epc : ffffffffbfc08364 0xffffffffbfc08364 ra : ffffffffbfc08800 0xffffffffbfc08800 Status: 140120e2 KX SX UX KERNEL EXL Cause : 00000008 (ExcCode 02) BadVA : 000000000203bd00 PrId : 00000430 (R4000SC) Modules linked in: Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000) Stack : 0000000000000000 0000000000000000 0000000000000000 0000004d0000004d 80684cc0806a2a40 80596dc80000004d 8061000000000000 bfc0850c80684c38 0000000000000000 000000000203bd00 0000000000000000 0000000000000000 0000000000000000 00000000bfc0f3b4 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000002500000000 0000000000000000 0000000000000000 802c1a7400000000 0203bd0080596dc8 0203bd4d69000000 6c61632000000018 5f746567646e6172 6c616320625f6d6f 5f736e5f6d6f7266 206361323778302b 303d74696e726320 806a0a38806b0000 806a0a38806b0000 00000000806b0000 80683c58806b0000 ... Call Trace: Code: a082ffff 03e00008 00601021 <80820000> 00001821 10400005 24840001 80820000 24630001 ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception in interrupt KN04 V2.1k (PC: 0xa0026768, SP: 0x806848e8) >> In this case the pointer in $4 was truncated from 0x980000000203bd00 to 0x000000000203bd00. This may happen when no final console driver has been enabled in the configuration and consequently the initial console continues being used late into bootstrap or with an upcoming change that will switch the zs driver to use a platform device, which in turn will make the console handover happen only after other kernel threads have already been started. Fix the issue by making the buffer static and initdata, and therefore placed in the CKSEG0 32-bit compatibility segment, observing that the console output handler is called with the console lock held, implying no need for this code to be reentrant. Add an assertion to verify the buffer actually has been placed in a compatibility segment. | ||||
| CVE-2026-66373 | 1 Redis | 1 Redis | 2026-08-01 | 7.5 High |
| Redis before 8.8.0, in the unusual case where an authenticated attacker can execute RESTORE, allows remote code execution via a RESTORE payload where the same NACK (pending entry) is referenced by more than one consumer, because deleting both consumers via XGROUP DELCONSUMER leads to a double free. NOTE: this issue exists because of an incomplete fix for CVE-2026-25243. | ||||
| CVE-2026-66374 | 1 Nic | 1 Knot Resolver | 2026-08-01 | 8.1 High |
| Knot Resolver before 6.4.1 allows remote code execution via a heap-based buffer overflow in the DoQ (DNS-over-QUIC) receive path. | ||||
| CVE-2026-64257 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject overlapping data areas in SMB2 responses Commit 53b7c271f06b ("smb: client: restrict implied bcc[0] exemption to responses without data area") restricted the implied bcc[0] length exception to responses without a data area. However, the overlap handling in __smb2_calc_size() clears data_length, which can make an invalid response appear to have no data area and so qualify for the exception. Track data area overlap separately and reject such responses before applying the length compatibility exceptions. | ||||
| CVE-2026-64262 | 1 Linux | 1 Linux Kernel | 2026-08-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse-uring: end fuse_req on io-uring cancel task work When io_uring delivers task work with tw.cancel set (PF_EXITING, PF_KTHREAD fallback, or percpu_ref_is_dying on the ring context), fuse_uring_send_in_task() takes the cancel branch, assigns -ECANCELED, and falls through to fuse_uring_send(). That path only flips the entry to FRRS_USERSPACE and completes the io_uring cmd; it never discharges the ring entry's owning reference to the fuse_req that fuse_uring_add_req_to_ring_ent() handed it at dispatch time. fuse_uring_send_in_task() tw.cancel == true err = -ECANCELED fuse_uring_send(ent, cmd, err, issue_flags) ent->state = FRRS_USERSPACE list_move(&ent->list, &queue->ent_in_userspace) ent->cmd = NULL io_uring_cmd_done(-ECANCELED) /* ent->fuse_req still set, req still hashed */ The fuse_req stays linked on fpq->processing[hash] and fuse_request_end() is never invoked. The originating syscall thread blocks in D-state in request_wait_answer() until fuse_abort_conn() runs, which can be the entire connection lifetime. For FR_BACKGROUND requests fc->num_background is never decremented either, so repeated cancels inflate the counter until max_background is hit and all later background ops stall. tw.cancel does not imply a connection abort (e.g. a single io_uring worker thread exits while the fuse connection stays up), so this cannot be left for fuse_abort_conn() to clean up. Ending the req but still routing the entry through fuse_uring_send() is not enough: that leaves a req-less entry on ent_in_userspace, and ent_list_request_expired() dereferences ent->fuse_req unconditionally on the head of that list, which would then NULL-deref. Fix the cancel branch to release the entry directly. Remove it from the queue, complete the io_uring cmd, end the fuse_req, free the entry, and drop its queue_refs (waking the teardown waiter if it was the last). | ||||
| CVE-2026-64264 | 1 Linux | 1 Linux Kernel | 2026-08-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse-uring: fix EFAULT clobber in fuse_uring_commit copy_from_user() returns the number of bytes not copied as an unsigned residual on failure (1..sizeof(struct fuse_out_header)). fuse_uring_commit stores that residual in ssize_t err, sets req->out.h.error to -EFAULT, then jumps to out: with err still holding the positive residual. err = copy_from_user(&req->out.h, &ent->headers->in_out, sizeof(req->out.h)); if (err) { req->out.h.error = -EFAULT; goto out; /* err is the positive residual */ } ... out: fuse_uring_req_end(ent, req, err); fuse_uring_req_end() then runs if (error) req->out.h.error = error; which overwrites the just-assigned -EFAULT with the positive residual. FUSE callers such as fuse_simple_request() test err < 0 to detect failure, so the positive value is interpreted as success and the caller proceeds with an uninitialised or partial req->out.args. Fix by assigning err = -EFAULT in the failure branch before jumping to out, so fuse_uring_req_end() receives a negative errno and sets req->out.h.error to -EFAULT. | ||||
| CVE-2026-64267 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse: avoid 32-bit prune notification count wrap FUSE_NOTIFY_PRUNE validates the nodeid payload length with: size - sizeof(outarg) != outarg.count * sizeof(u64) On 32-bit kernels, size_t is also 32 bits, so the daemon-controlled count multiplication can wrap. A prune notification with count 0x20000000 and no nodeid payload passes the check, enters the copy loop, and asks the device copy path to read nodeids that are not present in the userspace write buffer. In QEMU this reaches the fuse_copy_fill() BUG_ON(!err) path. Validate the payload length with array_size() instead. That accepts exactly the same valid messages, but avoids wrapping arithmetic before the copy loop consumes the count. | ||||
| CVE-2026-64268 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: bound Read Response placement to the RREAD length In drivers/infiniband/sw/siw/siw_qp_rx.c, siw_proc_rresp() places each inbound Read Response DDP segment at sge->laddr + wqe->processed and then accumulates wqe->processed, but it never checks the running total against the sink buffer length on continuation segments. siw_check_sge() resolves and validates the sink memory only on the first fragment (the if (!*mem) branch), and siw_rresp_check_ntoh() compares the cumulative length against wqe->bytes only on the final segment (the !frx->more_ddp_segs guard). A connected siw peer that answers an outstanding RREAD with Read Response segments that keep the DDP Last flag clear, carrying more total payload than the RREAD requested, drives wqe->processed past the validated sink buffer; the next siw_rx_data() call writes out of bounds at sge->laddr + wqe->processed. siw runs iWARP over ordinary routable TCP, so the peer is the remote end of an established RDMA connection and needs no local privilege. Bound every segment before placement, exactly as siw_proc_send() and siw_proc_write() already do for their tagged and untagged paths, and terminate the connection with a base-or-bounds DDP error when the Read Response would overrun the sink buffer. This is the second receive-path length fix for this file. A separate change rejects an MPA FPDU length that underflows the per-fragment remainder in the header decode; that guard does not cover this case, because here each individual segment length is self-consistent and only the accumulated placement offset overruns the buffer. | ||||
| CVE-2026-64270 | 1 Linux | 1 Linux Kernel | 2026-08-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: mms114 - reject an oversized device packet size mms114_interrupt() reads a packet of touch data from the device into a fixed-size on-stack buffer struct mms114_touch touch[MMS114_MAX_TOUCH]; which holds MMS114_MAX_TOUCH (10) events of MMS114_EVENT_SIZE (8) bytes, i.e. 80 bytes. The length of the I2C read into it is taken verbatim from the device: packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE); if (packet_size <= 0) goto out; ... error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size, (u8 *)touch); packet_size is a single device register byte (0x0F) and the only check is the lower bound packet_size <= 0; it is never bounded against the size of touch[]. A malfunctioning, malicious or counterfeit controller (or an attacker tampering with the I2C bus) can report a packet_size of up to 255, so __mms114_read_reg() writes up to 175 bytes past the end of touch[] on the IRQ-thread stack: a stack out-of-bounds write that can overwrite the stack canary, saved registers and the return address. A well-formed device never reports more than the buffer holds, so reject an oversized packet and drop the report, consistent with the handler's other error paths, rather than reading past the buffer. | ||||
| CVE-2026-64271 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: touchwin - reset the packet index on every complete packet tw_interrupt() accumulates each non-zero serial byte into a fixed three-byte buffer with a running index that is only reset once a full packet has been received *and* the device's two Y bytes agree: tw->data[tw->idx++] = data; if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) { ... tw->idx = 0; } The reset is gated on tw->data[1] == tw->data[2], a value the device controls. A malicious, malfunctioning or counterfeit Touchwindow peripheral can stream non-zero bytes whose 2nd and 3rd bytes differ: the index reaches TW_LENGTH without the equality holding, is never reset, and keeps growing, so tw->data[tw->idx++] walks off the end of the three-byte array and the rest of the heap-allocated struct tw, one attacker-chosen byte at a time -- an unbounded, device-driven heap out-of-bounds write. Reset the index on every completed packet and report an event only when the two Y bytes match, like the other serio touchscreen drivers do. | ||||
| CVE-2026-64272 | 1 Linux | 1 Linux Kernel | 2026-08-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: mms114 - fix touch indexing for MMS134S and MMS136 The MMS134S and MMS136 touch controllers have an event size of 6 bytes rather than 8 bytes. When __mms114_read_reg() reads the touch data packet from the device into the touch buffer, the events are packed tightly at 6-byte intervals. However, the driver iterates through the events using standard C array indexing (touch[index]), where each element is sizeof(struct mms114_touch) (8 bytes) apart. As a result, any touch events beyond the first one are read from incorrect offsets and parsed improperly. Fix this by explicitly calculating the byte offset for each touch event based on the device's specific event size. | ||||
| CVE-2026-64274 | 1 Linux | 1 Linux Kernel | 2026-08-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: goodix - clamp the device-reported contact count goodix_ts_read_input_report() copies the number of touch points reported by the device into an on-stack buffer u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS]; which is sized for at most GOODIX_MAX_CONTACTS (10) contacts. The only runtime check bounds the per-interrupt count against ts->max_touch_num, but that value is taken verbatim from a 4-bit field of the device configuration block and is never clamped: ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f; The nibble can be 0..15, so a malfunctioning, malicious or counterfeit controller (or an attacker tampering with the I2C bus) can advertise up to 15 contacts. goodix_ts_read_input_report() then accepts a touch_num of up to 15 and the second goodix_i2c_read() writes ts->contact_size * (touch_num - 1) bytes past the one-contact header into point_data - up to 30 bytes (45 with the 9-byte report format) beyond the 92-byte buffer: a stack out-of-bounds write. Clamp max_touch_num to GOODIX_MAX_CONTACTS, the number of contacts point_data[] is sized for, when reading it from the configuration. | ||||
| CVE-2026-64280 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region() afu_ioctl_dma_map() accepts a 64-bit length from userspace via DFL_FPGA_PORT_DMA_MAP ioctl without an upper bound check. The value is passed to afu_dma_pin_pages() where npages is derived as length >> PAGE_SHIFT and passed to pin_user_pages_fast() which takes int nr_pages, causing implicit truncation if length is very large. Validate map.length at the ioctl entry point before calling afu_dma_map_region(), rejecting values whose page count exceeds INT_MAX. | ||||
| CVE-2026-64285 | 1 Linux | 1 Linux Kernel | 2026-08-01 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Pin source page for write when adding CPUID data for SNP guest When populating a guest_memfd instance with the initial CPUID data for an SNP guest, acquire a writable pin on the source page as KVM will write back the "correct" CPUID information if the userspace provided data is rejected by trusted firmware. Because KVM writes to the source page using a kernel mapping, pinning for read could result in KVM clobbering read-only memory. Note, well-behaved VMMs are unlikely to be affected, as CPUID information is almost always dynamically generated by userspace, i.e. it's unlikely for the CPUID information to be backed by a read-only mapping. [sean: rewrite shortlog and changelog, tag for stable@] | ||||
| CVE-2026-64287 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Bound used_lrs when flushing the pKVM hyp vCPU flush_hyp_vcpu() copies the host vGIC state into the hyp's private vCPU on every run. The vGIC list register save and restore use used_lrs as their loop bound and expect it to stay within the number of implemented list registers. While this is generally the case, flush_hyp_vcpu() copies vgic_v3 verbatim and does not enforce this, so a value provided by the host is used at EL2 to index vgic_lr[] and access ICH_LR<n>_EL2 (host -> EL2). Fix by clamping used_lrs to the number of implemented list registers after the copy, as the trusted path already does in vgic_flush_lr_state(). The number of implemented list registers is constant after init, so it is replicated once from kvm_vgic_global_state.nr_lr into hyp_gicv3_nr_lr rather than read on every entry. | ||||
| CVE-2026-64289 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Set upper bounds on cache invalidation entry_num and entry_len iommufd_hwpt_invalidate() takes a user-controlled entry_num and entry_len, each bounded only by U32_MAX. An entry_len beyond the kernel's struct size makes the copy helper verify the extra bytes are zero, scanning that excess in one uninterruptible pass; a multi-gigabyte value over zeroed user memory trips the soft-lockup watchdog. A large entry_num is the other half, driving the backend invalidation loop with no reschedule. The VT-d nested handler, for one, copies each entry and flushes caches per iteration, pinning the CPU on a non-preemptible kernel. Cap both in the ioctl. entry_len is held under PAGE_SIZE, above any request struct, and entry_num under 1 << 19, the order of a hardware invalidation queue and well beyond any real batch, bounding the per-call loop length. | ||||