Export limit exceeded: 101068 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (101068 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-22743 | 1 Git For Windows Project | 1 Git For Windows | 2025-03-10 | 7.3 High |
| Git for Windows is the Windows port of the revision control system Git. Prior to Git for Windows version 2.39.2, by carefully crafting DLL and putting into a subdirectory of a specific name living next to the Git for Windows installer, Windows can be tricked into side-loading said DLL. This potentially allows users with local write access to place malicious payloads in a location where automated upgrades might run the Git for Windows installer with elevation. Version 2.39.2 contains a patch for this issue. Some workarounds are available. Never leave untrusted files in the Downloads folder or its sub-folders before executing the Git for Windows installer, or move the installer into a different directory before executing it. | ||||
| CVE-2023-25156 | 1 Kiwitcms | 1 Kiwi Tcms | 2025-03-10 | 7.5 High |
| Kiwi TCMS, an open source test management system, does not impose rate limits in versions prior to 12.0. This makes it easier to attempt brute-force attacks against the login page. Users should upgrade to v12.0 or later to receive a patch. As a workaround, users may install and configure a rate-limiting proxy in front of Kiwi TCMS. | ||||
| CVE-2023-25171 | 1 Kiwitcms | 1 Kiwi Tcms | 2025-03-10 | 7.5 High |
| Kiwi TCMS, an open source test management system, does not impose rate limits in versions prior to 12.0. This makes it easier to attempt denial-of-service attacks against the Password reset page. An attacker could potentially send a large number of emails if they know the email addresses of users in Kiwi TCMS. Additionally that may strain SMTP resources. Users should upgrade to v12.0 or later to receive a patch. As potential workarounds, users may install and configure a rate-limiting proxy in front of Kiwi TCMS and/or configure rate limits on their email server when possible. | ||||
| CVE-2023-25578 | 1 Starliteproject | 1 Starlite | 2025-03-10 | 7.5 High |
| Starlite is an Asynchronous Server Gateway Interface (ASGI) framework. Prior to version 1.5.2, the request body parsing in `starlite` allows a potentially unauthenticated attacker to consume a large amount of CPU time and RAM. The multipart body parser processes an unlimited number of file parts and an unlimited number of field parts. This is a remote, potentially unauthenticated Denial of Service vulnerability. This vulnerability affects applications with a request handler that accepts a `Body(media_type=RequestEncodingType.MULTI_PART)`. The large amount of CPU time required for processing requests can block all available worker processes and significantly delay or slow down the processing of legitimate user requests. The large amount of RAM accumulated while processing requests can lead to Out-Of-Memory kills. Complete DoS is achievable by sending many concurrent multipart requests in a loop. Version 1.51.2 contains a patch for this issue. | ||||
| CVE-2023-24807 | 2 Nodejs, Redhat | 3 Undici, Enterprise Linux, Rhel Eus | 2025-03-10 | 7.5 High |
| Undici is an HTTP/1.1 client for Node.js. Prior to version 5.19.1, the `Headers.set()` and `Headers.append()` methods are vulnerable to Regular Expression Denial of Service (ReDoS) attacks when untrusted values are passed into the functions. This is due to the inefficient regular expression used to normalize the values in the `headerValueNormalize()` utility function. This vulnerability was patched in v5.19.1. No known workarounds are available. | ||||
| CVE-2023-25653 | 1 Cisco | 1 Node-jose | 2025-03-10 | 7.5 High |
| node-jose is a JavaScript implementation of the JSON Object Signing and Encryption (JOSE) for web browsers and node.js-based servers. Prior to version 2.2.0, when using the non-default "fallback" crypto back-end, ECC operations in `node-jose` can trigger a Denial-of-Service (DoS) condition, due to a possible infinite loop in an internal calculation. For some ECC operations, this condition is triggered randomly; for others, it can be triggered by malicious input. The issue has been patched in version 2.2.0. Since this issue is only present in the "fallback" crypto implementation, it can be avoided by ensuring that either WebCrypto or the Node `crypto` module is available in the JS environment where `node-jose` is being run. | ||||
| CVE-2021-32845 | 1 Mobyproject | 1 Hyperkit | 2025-03-10 | 7.7 High |
| HyperKit is a toolkit for embedding hypervisor capabilities in an application. In versions 0.20210107 and prior of HyperKit, the implementation of `qnotify` at `pci_vtrnd_notify` fails to check the return value of `vq_getchain`. This leads to `struct iovec iov;` being uninitialized and used to read memory in `len = (int) read(sc->vrsc_fd, iov.iov_base, iov.iov_len);` when an attacker is able to make `vq_getchain` fail. This issue may lead to a guest crashing the host causing a denial of service and, under certain circumstance, memory corruption. This issue is fixed in commit 41272a980197917df8e58ff90642d14dec8fe948. | ||||
| CVE-2021-32846 | 1 Mobyproject | 1 Hyperkit | 2025-03-10 | 7.7 High |
| HyperKit is a toolkit for embedding hypervisor capabilities in an application. In versions 0.20210107, function `pci_vtsock_proc_tx` in `virtio-sock` can lead to to uninitialized memory use. In this situation, there is a check for the return value to be less or equal to `VTSOCK_MAXSEGS`, but that check is not sufficient because the function can return `-1` if it finds an error it cannot recover from. Moreover, the negative return value will be used by `iovec_pull` in a while condition that can further lead to more corruption because the function is not designed to handle a negative `iov_len`. This issue may lead to a guest crashing the host causing a denial of service and, under certain circumstance, memory corruption. This issue is fixed in commit af5eba2360a7351c08dfd9767d9be863a50ebaba. | ||||
| CVE-2021-32847 | 1 Mobyproject | 1 Hyperkit | 2025-03-10 | 7.1 High |
| HyperKit is a toolkit for embedding hypervisor capabilities in an application. In versions 0.20210107 and prior, a malicious guest can trigger a vulnerability in the host by abusing the disk driver that may lead to the disclosure of the host memory into the virtualized guest. This issue is fixed in commit cf60095a4d8c3cb2e182a14415467afd356e982f. | ||||
| CVE-2021-32848 | 1 Octobox Project | 1 Octobox | 2025-03-10 | 7.5 High |
| Octobox is software for managing GitHub notifications. Prior to pull request (PR) 2807, a user of the system can provide a specifically crafted search query string that will trigger a ReDoS vulnerability. This issue is fixed in PR 2807. | ||||
| CVE-2023-25570 | 1 Apolloconfig | 1 Apollo | 2025-03-10 | 7.5 High |
| Apollo is a configuration management system. Prior to version 2.1.0, there are potential security issues if users expose apollo-configservice to the internet, which is not recommended. This is because there is no authentication feature enabled for the built-in eureka service. Malicious hackers may access eureka directly to mock apollo-configservice and apollo-adminservice. Login authentication for eureka was added in version 2.1.0. As a workaround, avoid exposing apollo-configservice to the internet. | ||||
| CVE-2023-25657 | 1 Networktocode | 1 Nautobot | 2025-03-10 | 7.5 High |
| Nautobot is a Network Source of Truth and Network Automation Platform. All users of Nautobot versions earlier than 1.5.7 are impacted by a remote code execution vulnerability. Nautobot did not properly sandbox Jinja2 template rendering. In Nautobot 1.5.7 has enabled sandboxed environments for the Jinja2 template engine used internally for template rendering for the following objects: `extras.ComputedField`, `extras.CustomLink`, `extras.ExportTemplate`, `extras.Secret`, `extras.Webhook`. While no active exploits of this vulnerability are known this change has been made as a preventative measure to protect against any potential remote code execution attacks utilizing maliciously crafted template code. This change forces the Jinja2 template engine to use a `SandboxedEnvironment` on all new installations of Nautobot. This addresses any potential unsafe code execution everywhere the helper function `nautobot.utilities.utils.render_jinja2` is called. Additionally, the documentation that had previously suggesting the direct use of `jinja2.Template` has been revised to suggest `render_jinja2`. Users are advised to upgrade to Nautobot 1.5.7 or newer. For users that are unable to upgrade to the latest release of Nautobot, you may add the following setting to your `nautobot_config.py` to apply the sandbox environment enforcement: `TEMPLATES[1]["OPTIONS"]["environment"] = "jinja2.sandbox.SandboxedEnvironment"` After applying this change, you must restart all Nautobot services, including any Celery worker processes. **Note:** *Nautobot specifies two template engines by default, the first being “django” for the Django built-in template engine, and the second being “jinja” for the Jinja2 template engine. This recommended setting will update the second item in the list of template engines, which is the Jinja2 engine.* For users that are unable to immediately update their configuration such as if a Nautobot service restart is too disruptive to operations, access to provide custom Jinja2 template values may be mitigated using permissions to restrict “change” (write) actions to the affected object types listed in the first section. **Note:** *This solution is intended to be stopgap until you can successfully update your `nautobot_config.py` or upgrade your Nautobot instance to apply the sandboxed environment enforcement.* | ||||
| CVE-2023-25154 | 1 Misskey | 1 Misskey | 2025-03-10 | 7.1 High |
| Misskey is an open source, decentralized social media platform. In versions prior to 13.5.0 the link to the instance to the sender that appears when viewing a user or note received through ActivityPub is not properly validated, so by inserting a URL with a javascript scheme an attacker may execute JavaScript code in the context of the recipient. This issue has been fixed in version 13.5.0. Users are advised to upgrade. Users unable to upgrade should not "view on remote" for untrusted instances. | ||||
| CVE-2023-24812 | 1 Misskey | 1 Misskey | 2025-03-10 | 8.8 High |
| Misskey is an open source, decentralized social media platform. In versions prior to 13.3.3 SQL injection is possible due to insufficient parameter validation in the note search API by tag (notes/search-by-tag). This has been fixed in version 13.3.3. Users are advised to upgrade. Users unable to upgrade should block access to the `api/notes/search-by-tag` endpoint. | ||||
| CVE-2023-24811 | 1 Misskey | 1 Misskey | 2025-03-10 | 7.1 High |
| Misskey is an open source, decentralized social media platform. In versions prior to 13.3.2 the URL preview function is subject to a cross site scripting vulnerability due to insufficient URL validation. Arbitrary JavaScript is executed when a malicious URL is loaded in the `View in Player` or `View in Window` preview. This has been fixed in version 13.3.2. Users are advised to upgrade. Users unable to upgrade should avoid usage of the `View in Player` or `View in Window` functions. | ||||
| CVE-2023-24810 | 1 Misskey | 1 Misskey | 2025-03-10 | 7.1 High |
| Misskey is an open source, decentralized social media platform. Due to insufficient validation of the redirect URL during `miauth` authentication in Misskey, arbitrary JavaScript can be executed when a user allows the link. All versions below 13.3.1 (including 12.x) are affected. This has been fixed in version 13.3.1. Users are advised to upgrade. Users unable to upgrade should not allow authentication of untrusted apps. | ||||
| CVE-2023-25824 | 1 Mod Gnutls Project | 1 Mod Gnutls | 2025-03-10 | 7.5 High |
| Mod_gnutls is a TLS module for Apache HTTPD based on GnuTLS. Versions from 0.9.0 to 0.12.0 (including) did not properly fail blocking read operations on TLS connections when the transport hit timeouts. Instead it entered an endless loop retrying the read operation, consuming CPU resources. This could be exploited for denial of service attacks. If trace level logging was enabled, it would also produce an excessive amount of log output during the loop, consuming disk space. The problem has been fixed in commit d7eec4e598158ab6a98bf505354e84352f9715ec, please update to version 0.12.1. There are no workarounds, users who cannot update should apply the errno fix detailed in the security advisory. | ||||
| CVE-2022-23535 | 1 Litedb | 1 Litedb | 2025-03-10 | 7.3 High |
| LiteDB is a small, fast and lightweight .NET NoSQL embedded database. Versions prior to 5.0.13 are subject to Deserialization of Untrusted Data. LiteDB uses a special field in JSON documents to cast different types from `BsonDocument` to POCO classes. When instances of an object are not the same of class, `BsonMapper` use a special field `_type` string info with full class name with assembly to be loaded and fit into your model. If your end-user can send to your app a plain JSON string, deserialization can load an unsafe object to fit into your model. This issue is patched in version 5.0.13 with some basic fixes to avoid this, but is not 100% guaranteed when using `Object` type. The next major version will contain an allow-list to select what kind of Assembly can be loaded. Workarounds are detailed in the vendor advisory. | ||||
| CVE-2023-26033 | 1 Gentoo | 1 Soko | 2025-03-10 | 7.5 High |
| Gentoo soko is the code that powers packages.gentoo.org. Versions prior to 1.0.1 are vulnerable to SQL Injection, leading to a Denial of Service. If the user selects (in user preferences) the "Recently Visited Packages" view for the index page, the value of the `search_history` cookie is used as a base64 encoded comma separated list of atoms. These are string loaded directly into the SQL query with `atom = '%s'` format string. As a result, any user can modify the browser's cookie value and inject most SQL queries. A proof of concept malformed cookie was generated that wiped the database or changed it's content. On the database, only public data is stored, so there is no confidentiality issues to site users. If it is known that the database was modified, a full restoration of data is possible by performing a full database wipe and performing full update of all components. This issue is patched with commit id 5ae9ca83b73. Version 1.0.1 contains the patch. If users are unable to upgrade immediately, the following workarounds may be applied: (1.) Use a proxy to always drop the `search_history` cookie until upgraded. The impact on user experience is low. (2.) Sanitize to the value of `search_history` cookie after base64 decoding it. | ||||
| CVE-2023-25825 | 1 Zoneminder | 1 Zoneminder | 2025-03-10 | 7.7 High |
| ZoneMinder is a free, open source Closed-circuit television software application for Linux which supports IP, USB and Analog cameras. Versions prior to 1.36.33 are vulnerable to Cross-site Scripting. Log entries can be injected into the database logs, containing a malicious referrer field. This is unescaped when viewing the logs in the web ui. This issue is patched in version 1.36.33. | ||||