Export limit exceeded: 349538 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (349538 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43277 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: APEI/GHES: ensure that won't go past CPER allocated record The logic at ghes_new() prevents allocating too large records, by checking if they're bigger than GHES_ESTATUS_MAX_SIZE (currently, 64KB). Yet, the allocation is done with the actual number of pages from the CPER bios table location, which can be smaller. Yet, a bad firmware could send data with a different size, which might be bigger than the allocated memory, causing an OOPS: Unable to handle kernel paging request at virtual address fff00000f9b40000 Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault Data abort info: ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 52-bit VAs, pgdp=000000008ba16000 [fff00000f9b40000] pgd=180000013ffff403, p4d=180000013fffe403, pud=180000013f85b403, pmd=180000013f68d403, pte=0000000000000000 Internal error: Oops: 0000000096000007 [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 303 Comm: kworker/0:1 Not tainted 6.19.0-rc1-00002-gda407d200220 #34 PREEMPT Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 02/02/2022 Workqueue: kacpi_notify acpi_os_execute_deferred pstate: 214020c5 (nzCv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : hex_dump_to_buffer+0x30c/0x4a0 lr : hex_dump_to_buffer+0x328/0x4a0 sp : ffff800080e13880 x29: ffff800080e13880 x28: ffffac9aba86f6a8 x27: 0000000000000083 x26: fff00000f9b3fffc x25: 0000000000000004 x24: 0000000000000004 x23: ffff800080e13905 x22: 0000000000000010 x21: 0000000000000083 x20: 0000000000000001 x19: 0000000000000008 x18: 0000000000000010 x17: 0000000000000001 x16: 00000007c7f20fec x15: 0000000000000020 x14: 0000000000000008 x13: 0000000000081020 x12: 0000000000000008 x11: ffff800080e13905 x10: ffff800080e13988 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000001 x6 : 0000000000000020 x5 : 0000000000000030 x4 : 00000000fffffffe x3 : 0000000000000000 x2 : ffffac9aba78c1c8 x1 : ffffac9aba76d0a8 x0 : 0000000000000008 Call trace: hex_dump_to_buffer+0x30c/0x4a0 (P) print_hex_dump+0xac/0x170 cper_estatus_print_section+0x90c/0x968 cper_estatus_print+0xf0/0x158 __ghes_print_estatus+0xa0/0x148 ghes_proc+0x1bc/0x220 ghes_notify_hed+0x5c/0xb8 notifier_call_chain+0x78/0x148 blocking_notifier_call_chain+0x4c/0x80 acpi_hed_notify+0x28/0x40 acpi_ev_notify_dispatch+0x50/0x80 acpi_os_execute_deferred+0x24/0x48 process_one_work+0x15c/0x3b0 worker_thread+0x2d0/0x400 kthread+0x148/0x228 ret_from_fork+0x10/0x20 Code: 6b14033f 540001ad a94707e2 f100029f (b8747b44) ---[ end trace 0000000000000000 ]--- Prevent that by taking the actual allocated are into account when checking for CPER length. [ rjw: Subject tweaks ] | ||||
| CVE-2026-43276 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix double destroy_workqueue on service rescan PCI path While testing corner cases in the driver, a use-after-free crash was found on the service rescan PCI path. When mana_serv_reset() calls mana_gd_suspend(), mana_gd_cleanup() destroys gc->service_wq. If the subsequent mana_gd_resume() fails with -ETIMEDOUT or -EPROTO, the code falls through to mana_serv_rescan() which triggers pci_stop_and_remove_bus_device(). This invokes the PCI .remove callback (mana_gd_remove), which calls mana_gd_cleanup() a second time, attempting to destroy the already- freed workqueue. Fix this by NULL-checking gc->service_wq in mana_gd_cleanup() and setting it to NULL after destruction. Call stack of issue for reference: [Sat Feb 21 18:53:48 2026] Call Trace: [Sat Feb 21 18:53:48 2026] <TASK> [Sat Feb 21 18:53:48 2026] mana_gd_cleanup+0x33/0x70 [mana] [Sat Feb 21 18:53:48 2026] mana_gd_remove+0x3a/0xc0 [mana] [Sat Feb 21 18:53:48 2026] pci_device_remove+0x41/0xb0 [Sat Feb 21 18:53:48 2026] device_remove+0x46/0x70 [Sat Feb 21 18:53:48 2026] device_release_driver_internal+0x1e3/0x250 [Sat Feb 21 18:53:48 2026] device_release_driver+0x12/0x20 [Sat Feb 21 18:53:48 2026] pci_stop_bus_device+0x6a/0x90 [Sat Feb 21 18:53:48 2026] pci_stop_and_remove_bus_device+0x13/0x30 [Sat Feb 21 18:53:48 2026] mana_do_service+0x180/0x290 [mana] [Sat Feb 21 18:53:48 2026] mana_serv_func+0x24/0x50 [mana] [Sat Feb 21 18:53:48 2026] process_one_work+0x190/0x3d0 [Sat Feb 21 18:53:48 2026] worker_thread+0x16e/0x2e0 [Sat Feb 21 18:53:48 2026] kthread+0xf7/0x130 [Sat Feb 21 18:53:48 2026] ? __pfx_worker_thread+0x10/0x10 [Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10 [Sat Feb 21 18:53:48 2026] ret_from_fork+0x269/0x350 [Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10 [Sat Feb 21 18:53:48 2026] ret_from_fork_asm+0x1a/0x30 [Sat Feb 21 18:53:48 2026] </TASK> | ||||
| CVE-2026-43274 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: mchp-ipc-sbi: fix out-of-bounds access in mchp_ipc_get_cluster_aggr_irq() The cluster_cfg array is dynamically allocated to hold per-CPU configuration structures, with its size based on the number of online CPUs. Previously, this array was indexed using hartid, which may be non-contiguous or exceed the bounds of the array, leading to out-of-bounds access. Switch to using cpuid as the index, as it is guaranteed to be within the valid range provided by for_each_online_cpu(). | ||||
| CVE-2026-24118 | 2 Patriksimek, Vm2 Project | 2 Vm2, Vm2 | 2026-05-08 | 9.8 Critical |
| vm2 is an open source vm/sandbox for Node.js. Prior to version 3.11.0, VM2 suffers from a sandbox breakout vulnerability. This allows attackers to write code which can escape from the VM2 sandbox and execute arbitrary commands on the host system. This issue has been patched in version 3.11.0. | ||||
| CVE-2026-43275 | 1 Linux | 1 Linux Kernel | 2026-05-08 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Flush exception handling work when RPM level is zero Ensure that the exception event handling work is explicitly flushed during suspend when the runtime power management level is set to UFS_PM_LVL_0. When the RPM level is zero, the device power mode and link state both remain active. Previously, the UFS core driver bypassed flushing exception event handling jobs in this configuration. This created a race condition where the driver could attempt to access the host controller to handle an exception after the system had already entered a deep power-down state, resulting in a system crash. Explicitly flush this work and disable auto BKOPs before the suspend callback proceeds. This guarantees that pending exception tasks complete and prevents illegal hardware access during the power-down sequence. | ||||
| CVE-2026-43302 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Set DMA segment size to avoid debug warnings When using V3D rendering with CONFIG_DMA_API_DEBUG enabled, the kernel occasionally reports a segment size mismatch. This is because 'max_seg_size' is not set. The kernel defaults to 64K. setting 'max_seg_size' to the maximum will prevent 'debug_dma_map_sg()' from complaining about the over-mapping of the V3D segment length. DMA-API: v3d 1002000000.v3d: mapping sg segment longer than device claims to support [len=8290304] [max=65536] WARNING: CPU: 0 PID: 493 at kernel/dma/debug.c:1179 debug_dma_map_sg+0x330/0x388 CPU: 0 UID: 0 PID: 493 Comm: Xorg Not tainted 6.12.53-yocto-standard #1 Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : debug_dma_map_sg+0x330/0x388 lr : debug_dma_map_sg+0x330/0x388 sp : ffff8000829a3ac0 x29: ffff8000829a3ac0 x28: 0000000000000001 x27: ffff8000813fe000 x26: ffffc1ffc0000000 x25: ffff00010fdeb760 x24: 0000000000000000 x23: ffff8000816a9bf0 x22: 0000000000000001 x21: 0000000000000002 x20: 0000000000000002 x19: ffff00010185e810 x18: ffffffffffffffff x17: 69766564206e6168 x16: 74207265676e6f6c x15: 20746e656d676573 x14: 20677320676e6970 x13: 5d34303334393134 x12: 0000000000000000 x11: 00000000000000c0 x10: 00000000000009c0 x9 : ffff8000800e0b7c x8 : ffff00010a315ca0 x7 : ffff8000816a5110 x6 : 0000000000000001 x5 : 000000000000002b x4 : 0000000000000002 x3 : 0000000000000008 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00010a315280 Call trace: debug_dma_map_sg+0x330/0x388 __dma_map_sg_attrs+0xc0/0x278 dma_map_sgtable+0x30/0x58 drm_gem_shmem_get_pages_sgt+0xb4/0x140 v3d_bo_create_finish+0x28/0x130 [v3d] v3d_create_bo_ioctl+0x54/0x180 [v3d] drm_ioctl_kernel+0xc8/0x140 drm_ioctl+0x2d4/0x4d8 | ||||
| CVE-2026-43318 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix sync handling in amdgpu_dma_buf_move_notify Invalidating a dmabuf will impact other users of the shared BO. In the scenario where process A moves the BO, it needs to inform process B about the move and process B will need to update its page table. The commit fixes a synchronisation bug caused by the use of the ticket: it made amdgpu_vm_handle_moved behave as if updating the page table immediately was correct but in this case it's not. An example is the following scenario, with 2 GPUs and glxgears running on GPU0 and Xorg running on GPU1, on a system where P2P PCI isn't supported: glxgears: export linear buffer from GPU0 and import using GPU1 submit frame rendering to GPU0 submit tiled->linear blit Xorg: copy of linear buffer The sequence of jobs would be: drm_sched_job_run # GPU0, frame rendering drm_sched_job_queue # GPU0, blit drm_sched_job_done # GPU0, frame rendering drm_sched_job_run # GPU0, blit move linear buffer for GPU1 access # amdgpu_dma_buf_move_notify -> update pt # GPU0 It this point the blit job on GPU0 is still running and would likely produce a page fault. | ||||
| CVE-2026-43323 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched/fair: Fix zero_vruntime tracking fix John reported that stress-ng-yield could make his machine unhappy and managed to bisect it to commit b3d99f43c72b ("sched/fair: Fix zero_vruntime tracking"). The combination of yield and that commit was specific enough to hypothesize the following scenario: Suppose we have 2 runnable tasks, both doing yield. Then one will be eligible and one will not be, because the average position must be in between these two entities. Therefore, the runnable task will be eligible, and be promoted a full slice (all the tasks do is yield after all). This causes it to jump over the other task and now the other task is eligible and current is no longer. So we schedule. Since we are runnable, there is no {de,en}queue. All we have is the __{en,de}queue_entity() from {put_prev,set_next}_task(). But per the fingered commit, those two no longer move zero_vruntime. All that moves zero_vruntime are tick and full {de,en}queue. This means, that if the two tasks playing leapfrog can reach the critical speed to reach the overflow point inside one tick's worth of time, we're up a creek. Additionally, when multiple cgroups are involved, there is no guarantee the tick will in fact hit every cgroup in a timely manner. Statistically speaking it will, but that same statistics does not rule out the possibility of one cgroup not getting a tick for a significant amount of time -- however unlikely. Therefore, just like with the yield() case, force an update at the end of every slice. This ensures the update is never more than a single slice behind and the whole thing is within 2 lag bounds as per the comment on entity_key(). | ||||
| CVE-2026-43325 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't send a 6E related command when not supported MCC_ALLOWED_AP_TYPE_CMD is related to 6E support. Do not send it if the device doesn't support 6E. Apparently, the firmware is mistakenly advertising support for this command even on AX201 which does not support 6E and then the firmware crashes. | ||||
| CVE-2026-43327 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: dummy-hcd: Fix locking/synchronization error Syzbot testing was able to provoke an addressing exception and crash in the usb_gadget_udc_reset() routine in drivers/usb/gadgets/udc/core.c, resulting from the fact that the routine was called with a second ("driver") argument of NULL. The bad caller was set_link_state() in dummy_hcd.c, and the problem arose because of a race between a USB reset and driver unbind. These sorts of races were not supposed to be possible; commit 7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"), along with a few followup commits, was written specifically to prevent them. As it turns out, there are (at least) two errors remaining in the code. Another patch will address the second error; this one is concerned with the first. The error responsible for the syzbot crash occurred because the stop_activity() routine will sometimes drop and then re-acquire the dum->lock spinlock. A call to stop_activity() occurs in set_link_state() when handling an emulated USB reset, after the test of dum->ints_enabled and before the increment of dum->callback_usage. This allowed another thread (doing a driver unbind) to sneak in and grab the spinlock, and then clear dum->ints_enabled and dum->driver. Normally this other thread would have to wait for dum->callback_usage to go down to 0 before it would clear dum->driver, but in this case it didn't have to wait since dum->callback_usage had not yet been incremented. The fix is to increment dum->callback_usage _before_ calling stop_activity() instead of after. Then the thread doing the unbind will not clear dum->driver until after the call to usb_gadget_udc_reset() safely returns and dum->callback_usage has been decremented again. | ||||
| CVE-2026-43342 | 1 Linux | 1 Linux Kernel | 2026-05-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_rndis: Protect RNDIS options with mutex The class/subclass/protocol options are suspectible to race conditions as they can be accessed concurrently through configfs. Use existing mutex to protect these options. This issue was identified during code inspection. | ||||
| CVE-2026-24120 | 2 Patriksimek, Vm2 Project | 2 Vm2, Vm2 | 2026-05-08 | 9.8 Critical |
| vm2 is an open source vm/sandbox for Node.js. Prior to version 3.10.5, the fix for CVE-2023-37466 is insufficient and can be circumvented allowing attackers to write code which can escape from the VM2 sandbox and execute arbitrary commands on the host system. This issue has been patched in version 3.10.5. | ||||
| CVE-2026-24781 | 2 Patriksimek, Vm2 Project | 2 Vm2, Vm2 | 2026-05-08 | 9.8 Critical |
| vm2 is an open source vm/sandbox for Node.js. Prior to version 3.11.0, VM2 suffers from a sandbox breakout vulnerability through the inspect function. This allows attackers to write code which can escape from the VM2 sandbox and execute arbitrary commands on the host system. This issue has been patched in version 3.11.0. | ||||
| CVE-2026-38428 | 2 Kestra, Kestra-io | 2 Kestra, Kestra | 2026-05-08 | 9.8 Critical |
| Kestra v1.3.3 and before is vulnerable to SQL Injection. The vulnerability occurs because user-controlled input from a GET parameter is directly concatenated into an SQL query without proper sanitization or parameterization. As a result, attackers can inject arbitrary SQL expressions into the database query. | ||||
| CVE-2026-33324 | 2 Dataease, Fit2cloud | 2 Sqlbot, Sqlbot | 2026-05-08 | 8.8 High |
| SQLBot is an intelligent Text-to-SQL system based on large language models and RAG. In versions 1.7.0 and earlier, the Text2SQL chat interface is vulnerable to prompt injection. The user-provided question parameter is directly concatenated into the LLM prompt without filtering or escaping, and the SQL extracted from the LLM response is executed against the database without validation or sanitization. An authenticated attacker can craft a malicious question to manipulate the LLM into generating and executing arbitrary SQL statements. When connected to a PostgreSQL data source, this can lead to remote code execution via COPY FROM PROGRAM. This issue has been fixed in version 1.7.1. | ||||
| CVE-2026-33420 | 1 Dani-garcia | 1 Vaultwarden | 2026-05-08 | 5.3 Medium |
| Vaultwarden is a Bitwarden-compatible server written in Rust. In version 1.35.4 and earlier, the get_org_collections_details endpoint (GET /api/organizations/{org_id}/collections/details) is missing the has_full_access() authorization check that exists on the sibling get_org_collections endpoint. This allows any Manager-role user with accessAll=False and no collection assignments to retrieve the names, UUIDs, user-to-collection mappings, and group-to-collection mappings for all collections in the organization. This issue has been fixed in version 1.35.5. | ||||
| CVE-2026-42208 | 2 Berriai, Litellm | 2 Litellm, Litellm | 2026-05-08 | 9.8 Critical |
| LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format. From version 1.81.16 to before version 1.83.7, a database query used during proxy API key checks mixed the caller-supplied key value into the query text instead of passing it as a separate parameter. An unauthenticated attacker could send a specially crafted Authorization header to any LLM API route (for example POST /chat/completions) and reach this query through the proxy's error-handling path. An attacker could read data from the proxy's database and may be able to modify it, leading to unauthorised access to the proxy and the credentials it manages. This issue has been patched in version 1.83.7. | ||||
| CVE-2026-41501 | 1 Electerm Project | 1 Electerm | 2026-05-08 | 9.8 Critical |
| electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to version 3.3.8, a command injection vulnerability exists in github.com/elcterm/electerm/npm/install.js:130. The runLinux() function appends attacker-controlled remote version strings directly into an exec("rm -rf ...") command without validation. This issue has been patched in version 3.3.8. | ||||
| CVE-2026-43940 | 1 Electerm Project | 1 Electerm | 2026-05-08 | 8.4 High |
| electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to version 3.7.16, the runWidget function in src/app/widgets/load-widget.js constructs a file path by directly concatenating user‑supplied widget identifiers without any sanitisation. Because runWidget is exposed to the renderer process via an asynchronous IPC handler with no input validation, an attacker who achieves JavaScript execution inside the renderer (for example, through a malicious plugin or a cross‑site scripting flaw in the built‑in webview) can abuse a path traversal (../) to load and execute an arbitrary JavaScript file anywhere on the victim’s filesystem. This gives the attacker local code execution with the full privileges of the electerm process, leading to complete system compromise. This issue has been patched in version 3.7.16. | ||||
| CVE-2026-34527 | 1 Sandboxie-plus | 1 Sandboxie | 2026-05-08 | 5.3 Medium |
| Sandboxie-Plus is an open source sandbox-based isolation software for Windows. In versions 1.17.2 and earlier, SbieIniServer::HashPassword converts a SHA-1 digest to hexadecimal incorrectly. The high nibble of each byte is shifted right by 8 instead of 4, which always produces zero for an 8-bit value. As a result, the stored EditPassword hash only preserves the low nibble of each digest byte, reducing the effective entropy from 160 bits to 80 bits. This is layered on top of an unsalted SHA-1 scheme. The reduced entropy makes leaked or backed-up password hashes materially easier to brute-force. This issue has been fixed in version 1.17.3. | ||||