Export limit exceeded: 349241 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (349241 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-31984 | 1 Hcltech | 1 Bigfix Service Management | 2026-05-07 | 3.7 Low |
| HCL BigFix Service Management (SM) is affected by a security misconfiguration due to a missing or insecure “X-Content-Type-Options” header. This could allow browsers to perform MIME-type sniffing, potentially causing malicious content to be interpreted and executed incorrectly. | ||||
| CVE-2026-31727 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_ether: Fix NULL pointer deref in eth_get_drvinfo Commit ec35c1969650 ("usb: gadget: f_ncm: Fix net_device lifecycle with device_move") reparents the gadget device to /sys/devices/virtual during unbind, clearing the gadget pointer. If the userspace tool queries on the surviving interface during this detached window, this leads to a NULL pointer dereference. Unable to handle kernel NULL pointer dereference Call trace: eth_get_drvinfo+0x50/0x90 ethtool_get_drvinfo+0x5c/0x1f0 __dev_ethtool+0xaec/0x1fe0 dev_ethtool+0x134/0x2e0 dev_ioctl+0x338/0x560 Add a NULL check for dev->gadget in eth_get_drvinfo(). When detached, skip copying the fw_version and bus_info strings, which is natively handled by ethtool_get_drvinfo for empty strings. | ||||
| CVE-2026-6784 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-05-07 | 7.5 High |
| Memory safety bugs present in Firefox 149 and Thunderbird 149. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 150 and Thunderbird 150. | ||||
| CVE-2026-31728 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_ether: Fix race between gether_disconnect and eth_stop A race condition between gether_disconnect() and eth_stop() leads to a NULL pointer dereference. Specifically, if eth_stop() is triggered concurrently while gether_disconnect() is tearing down the endpoints, eth_stop() attempts to access the cleared endpoint descriptor, causing the following NPE: Unable to handle kernel NULL pointer dereference Call trace: __dwc3_gadget_ep_enable+0x60/0x788 dwc3_gadget_ep_enable+0x70/0xe4 usb_ep_enable+0x60/0x15c eth_stop+0xb8/0x108 Because eth_stop() crashes while holding the dev->lock, the thread running gether_disconnect() fails to acquire the same lock and spins forever, resulting in a hardlockup: Core - Debugging Information for Hardlockup core(7) Call trace: queued_spin_lock_slowpath+0x94/0x488 _raw_spin_lock+0x64/0x6c gether_disconnect+0x19c/0x1e8 ncm_set_alt+0x68/0x1a0 composite_setup+0x6a0/0xc50 The root cause is that the clearing of dev->port_usb in gether_disconnect() is delayed until the end of the function. Move the clearing of dev->port_usb to the very beginning of gether_disconnect() while holding dev->lock. This cuts off the link immediately, ensuring eth_stop() will see dev->port_usb as NULL and safely bail out. | ||||
| CVE-2026-30818 | 1 Tp-link | 3 Archer Ax53, Archer Ax53 Firmware, Ax53 V1 | 2026-05-07 | 8.0 High |
| An OS command injection vulnerability in the dnsmasq module of TP-Link Archer AX53 v1.0 allows an authenticated adjacent attacker to execute arbitrary code when a specially crafted configuration file is processed due to insufficient input validation. Successful exploitation may allow the attacker to modify device configuration, access sensitive information, or further compromise system integrity. This issue affects AX53 v1.0: before 1.7.1 Build 20260213. | ||||
| CVE-2026-30817 | 1 Tp-link | 3 Archer Ax53, Archer Ax53 Firmware, Ax53 V1 | 2026-05-07 | 5.7 Medium |
| An external configuration control vulnerability in the OpenVPN module of TP-Link AX53 v1.0 allows an authenticated adjacent attacker to read arbitrary files when a malicious configuration file is processed. Successful exploitation may allow unauthorized access to arbitrary files on the device, potentially exposing sensitive information.This issue affects AX53 v1.0: before 1.7.1 Build 20260213. | ||||
| CVE-2026-30816 | 1 Tp-link | 3 Archer Ax53, Archer Ax53 Firmware, Ax53 V1 | 2026-05-07 | 5.7 Medium |
| An external control of configuration vulnerability in the OpenVPN module of TP-Link AX53 v1.0 allows an authenticated adjacent attacker to read arbitrary file when a malicious configuration file is processed. Successful exploitation may allow unauthorized access to arbitrary files on the device, potentially exposing sensitive information.This issue affects AX53 v1.0: before 1.7.1 Build 20260213. | ||||
| CVE-2026-30815 | 1 Tp-link | 3 Archer Ax53, Archer Ax53 Firmware, Ax53 V1 | 2026-05-07 | 8.0 High |
| An OS command injection vulnerability in the OpenVPN module of TP-Link Archer AX53 v1.0 allows an authenticated adjacent attacker to execute system commands when a specially crafted configuration file is processed due to insufficient input validation. Successful exploitation may allow modification of configuration files, disclosure of sensitive information, or further compromise of device integrity. This issue affects AX53 v1.0: before 1.7.1 Build 20260213. | ||||
| CVE-2026-30814 | 1 Tp-link | 3 Archer Ax53, Archer Ax53 Firmware, Ax53 V1 | 2026-05-07 | 8.0 High |
| A stack-based buffer overflow in the tmpServer module of TP-Link Archer AX53 v1.0 allows an authenticated adjacent attacker to trigger a segmentation fault and potentially execute arbitrary code via a specially crafted configuration file. Successful exploitation may cause a crash and could allow arbitrary code execution, enabling modification of device state, exposure of sensitive data, or further compromise of device integrity. This issue affects AX53 v1.0: before 1.7.1 Build 20260213. | ||||
| CVE-2026-43272 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix possible dereference of uninitialized pointer There is a pointer head_page in rb_meta_validate_events() which is not initialized at the beginning of a function. This pointer can be dereferenced if there is a failure during reader page validation. In this case the control is passed to "invalid" label where the pointer is dereferenced in a loop. To fix the issue initialize orig_head and head_page before calling rb_validate_buffer. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2026-43276 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix double destroy_workqueue on service rescan PCI path While testing corner cases in the driver, a use-after-free crash was found on the service rescan PCI path. When mana_serv_reset() calls mana_gd_suspend(), mana_gd_cleanup() destroys gc->service_wq. If the subsequent mana_gd_resume() fails with -ETIMEDOUT or -EPROTO, the code falls through to mana_serv_rescan() which triggers pci_stop_and_remove_bus_device(). This invokes the PCI .remove callback (mana_gd_remove), which calls mana_gd_cleanup() a second time, attempting to destroy the already- freed workqueue. Fix this by NULL-checking gc->service_wq in mana_gd_cleanup() and setting it to NULL after destruction. Call stack of issue for reference: [Sat Feb 21 18:53:48 2026] Call Trace: [Sat Feb 21 18:53:48 2026] <TASK> [Sat Feb 21 18:53:48 2026] mana_gd_cleanup+0x33/0x70 [mana] [Sat Feb 21 18:53:48 2026] mana_gd_remove+0x3a/0xc0 [mana] [Sat Feb 21 18:53:48 2026] pci_device_remove+0x41/0xb0 [Sat Feb 21 18:53:48 2026] device_remove+0x46/0x70 [Sat Feb 21 18:53:48 2026] device_release_driver_internal+0x1e3/0x250 [Sat Feb 21 18:53:48 2026] device_release_driver+0x12/0x20 [Sat Feb 21 18:53:48 2026] pci_stop_bus_device+0x6a/0x90 [Sat Feb 21 18:53:48 2026] pci_stop_and_remove_bus_device+0x13/0x30 [Sat Feb 21 18:53:48 2026] mana_do_service+0x180/0x290 [mana] [Sat Feb 21 18:53:48 2026] mana_serv_func+0x24/0x50 [mana] [Sat Feb 21 18:53:48 2026] process_one_work+0x190/0x3d0 [Sat Feb 21 18:53:48 2026] worker_thread+0x16e/0x2e0 [Sat Feb 21 18:53:48 2026] kthread+0xf7/0x130 [Sat Feb 21 18:53:48 2026] ? __pfx_worker_thread+0x10/0x10 [Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10 [Sat Feb 21 18:53:48 2026] ret_from_fork+0x269/0x350 [Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10 [Sat Feb 21 18:53:48 2026] ret_from_fork_asm+0x1a/0x30 [Sat Feb 21 18:53:48 2026] </TASK> | ||||
| CVE-2026-31729 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: validate connector number in ucsi_notify_common() The connector number extracted from CCI via UCSI_CCI_CONNECTOR() is a 7-bit field (0-127) that is used to index into the connector array in ucsi_connector_change(). However, the array is only allocated for the number of connectors reported by the device (typically 2-4 entries). A malicious or malfunctioning device could report an out-of-range connector number in the CCI, causing an out-of-bounds array access in ucsi_connector_change(). Add a bounds check in ucsi_notify_common(), the central point where CCI is parsed after arriving from hardware, so that bogus connector numbers are rejected before they propagate further. | ||||
| CVE-2026-43252 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: in-kernel: always set ID as avail when rm endp Syzkaller managed to find a combination of actions that was generating this warning: WARNING: net/mptcp/pm_kernel.c:1074 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538, CPU#1: syz.7.48/2535 Modules linked in: CPU: 1 UID: 0 PID: 2535 Comm: syz.7.48 Not tainted 6.18.0-03987-gea5f5e676cf5 #17 PREEMPT(voluntary) Hardware name: QEMU Ubuntu 25.10 PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline] RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline] RIP: 0010:mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline] RIP: 0010:mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538 Code: 89 c7 e8 c5 8c 73 fe e9 f7 fd ff ff 49 83 ef 80 e8 b7 8c 73 fe 4c 89 ff be 03 00 00 00 e8 4a 29 e3 fe eb ac e8 a3 8c 73 fe 90 <0f> 0b 90 e9 3d ff ff ff e8 95 8c 73 fe b8 a1 ff ff ff eb 1a e8 89 RSP: 0018:ffffc9001535b820 EFLAGS: 00010287 netdevsim0: tun_chr_ioctl cmd 1074025677 RAX: ffffffff82da294d RBX: 0000000000000001 RCX: 0000000000080000 RDX: ffffc900096d0000 RSI: 00000000000006d6 RDI: 00000000000006d7 netdevsim0: linktype set to 823 RBP: ffff88802cdb2240 R08: 00000000000104ae R09: ffffffffffffffff R10: ffffffff82da27d4 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88801246d8c0 R14: ffffc9001535b8b8 R15: ffff88802cdb1800 FS: 00007fc6ac5a76c0(0000) GS:ffff8880f90c8000(0000) knlGS:0000000000000000 netlink: 'syz.3.50': attribute type 5 has an invalid length. CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 netlink: 1232 bytes leftover after parsing attributes in process `syz.3.50'. CR2: 0000200000010000 CR3: 0000000025b1a000 CR4: 0000000000350ef0 Call Trace: <TASK> mptcp_pm_set_flags net/mptcp/pm_netlink.c:277 [inline] mptcp_pm_nl_set_flags_doit+0x1d7/0x210 net/mptcp/pm_netlink.c:282 genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x4ab/0x5b0 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0xc9/0xf0 net/socket.c:733 ____sys_sendmsg+0x272/0x3b0 net/socket.c:2608 ___sys_sendmsg+0x2de/0x320 net/socket.c:2662 __sys_sendmsg net/socket.c:2694 [inline] __do_sys_sendmsg net/socket.c:2699 [inline] __se_sys_sendmsg net/socket.c:2697 [inline] __x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2697 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xed/0x360 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fc6adb66f6d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fc6ac5a6ff8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fc6addf5fa0 RCX: 00007fc6adb66f6d RDX: 0000000000048084 RSI: 00002000000002c0 RDI: 000000000000000e RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000 ---truncated--- | ||||
| CVE-2026-7981 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-05-07 | 8.1 High |
| Out of bounds read in Codecs in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to obtain potentially sensitive information from process memory via a malicious file. (Chromium security severity: Medium) | ||||
| CVE-2026-8000 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-05-07 | 8.8 High |
| Insufficient validation of untrusted input in ChromeDriver in Google Chrome on Windows prior to 148.0.7778.96 allowed a remote attacker to execute arbitrary code via a crafted HTML page. (Chromium security severity: Low) | ||||
| CVE-2026-8003 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-05-07 | 5.4 Medium |
| Insufficient validation of untrusted input in TabGroups in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to perform UI spoofing via malicious network traffic. (Chromium security severity: Low) | ||||
| CVE-2026-8005 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-05-07 | 4.3 Medium |
| Insufficient validation of untrusted input in Cast in Google Chrome prior to 148.0.7778.96 allowed an attacker on the local network segment to bypass same origin policy via malicious network traffic. (Chromium security severity: Low) | ||||
| CVE-2026-25436 | 2 Wordpress, Wp Royal | 2 Wordpress, Royal Elementor Addons | 2026-05-07 | 5.3 Medium |
| Missing Authorization vulnerability in WProyal Royal Elementor Addons allows Exploiting Incorrectly Configured Access Control Security Levels. This issue affects Royal Elementor Addons: from n/a before 1.7.1053. | ||||
| CVE-2026-31730 | 1 Linux | 1 Linux Kernel | 2026-05-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: possible double-free of cctx->remote_heap fastrpc_init_create_static_process() may free cctx->remote_heap on the err_map path but does not clear the pointer. Later, fastrpc_rpmsg_remove() frees cctx->remote_heap again if it is non-NULL, which can lead to a double-free if the INIT_CREATE_STATIC ioctl hits the error path and the rpmsg device is subsequently removed/unbound. Clear cctx->remote_heap after freeing it in the error path to prevent the later cleanup from freeing it again. This issue was found by an in-house analysis workflow that extracts AST-based information and runs static checks, with LLM assistance for triage, and was confirmed by manual code review. No hardware testing was performed. | ||||
| CVE-2026-6222 | 2 Wordpress, Wpmudev | 2 Wordpress, Forminator Forms – Contact Form, Payment Form & Custom Form Builder | 2026-05-07 | 5.3 Medium |
| The Forminator Forms plugin for WordPress is vulnerable to Missing Authorization in versions up to and including 1.51.1. This is due to the `processRequest()` method in `Forminator_Admin_Module_Edit_Page` (admin/abstracts/class-admin-module-edit-page.php) dispatching sensitive module-management actions — including export, delete, clone, delete-entries, publish/draft, and bulk variants — after only a nonce check, without ever verifying that the current user holds the `manage_forminator_modules` capability. The nonce used (`forminator_form_request`) is unconditionally embedded in the global `forminatorData` JavaScript object and localized on every Forminator admin page, including Templates and Reports pages accessible to users who explicitly lack module-management permissions. Because `processRequest()` is invoked during the `admin_menu` action hook — which fires before WordPress enforces page-level capability checks — a user whose Forminator role is restricted to Templates or Reports can craft a valid POST request targeting any published module and successfully trigger the vulnerable actions. This makes it possible for authenticated attackers with subscriber-level access (or any custom low-privilege Forminator role) to export the complete internal configuration of arbitrary forms/polls/quizzes (including notification routing, integration credentials, and conditional logic), delete modules, delete all submissions/votes, clone modules, or bulk-change publish/draft status. | ||||