Export limit exceeded: 20488 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20488 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64013 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: button: Fix ACPI GPE handler leak during removal Commit a7e23ec17fee ("ACPI: button: Install notifier for system events as well") changed the ACPI notify handler type for ACPI buttons to ACPI_ALL_NOTIFY, but it forgot to update acpi_button_remove() to reflect that change. This leads to leaking the notify handler past driver removal, which may cause a kernel crash to occur if ACPI notify on the given device is triggered after removing the driver, and causes a subsequent probe of the given device with the same driver to fail. Address this by updating the acpi_remove_notify_handler() call in acpi_button_remove() as appropriate. | ||||
| CVE-2026-64016 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix durable reconnect error path file lifetime After a durable reconnect succeeds, ksmbd_reopen_durable_fd() republishes the same ksmbd_file into the session volatile-id table. If smb2_open() then takes a later error path, cleanup first calls ksmbd_fd_put(work, fp) and then unconditionally calls ksmbd_put_durable_fd(dh_info.fp). In this case fp and dh_info.fp are the same object. The first put drops the reconnect lookup reference, but the final durable put can run __ksmbd_close_fd(NULL, fp). Because the final close is not session-aware, it can free the file object without removing the volatile-id entry that was just published into the session table. Use the session-aware put for the final reconnect drop when the reconnect had already succeeded and the error path is cleaning up the republished file. Earlier reconnect failures, before fp is assigned to dh_info.fp, keep using the durable-only put path. | ||||
| CVE-2026-64017 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: pop cached request if it is usable When submitting a bio to blk-mq, if the task should sleep after peeking a cached request, but before it pops it, the plug flushes and calls blk_mq_free_plug_rqs, freeing the cached_rqs. This creates a use-after-free bug. Fix this by popping the cached request before any possible blocking calls if it is suitable for use. Popping this request first holds a queue reference, so avoid any serialization races with queue freezes and can safely proceed with dispatching that request to the driver. This potentially increases a timing window from when a driver wants to freeze its queue to when requests stop being dispatched. That scenario is off the fast path though, and drivers need to appropriately handle requests during a freeze request anyway. The downside is the popped element needs to be individually freed when we performed a bio plug merge. The cached request would have had to be freed later anyway, but this patch does it inline with building the plug list instead of after flushing it. | ||||
| CVE-2026-64018 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: validate rx_req_idx to prevent out-of-bounds array access In mana_hwc_rx_event_handler(), rx_req_idx is derived from sge->address in DMA-coherent memory. In Confidential VMs (SEV-SNP/TDX), this memory is shared unencrypted and HW can modify WQE contents at any time. No bounds check exists on rx_req_idx, which can lead to an out-of-bounds access into reqs[]. Add bounds check on rx_req_idx in mana_hwc_rx_event_handler() before using it to index the reqs[] array. | ||||
| CVE-2026-64025 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: bpf, skmsg: fix verdict sk_data_ready racing with ktls rx sk_psock_strp_data_ready() already checks tls_sw_has_ctx_rx() and defers to psock->saved_data_ready when a TLS RX context is present, avoiding a conflict with the TLS strparser's ownership of the receive queue (commit e91de6afa81c, "bpf: Fix running sk_skb program types with ktls"). sk_psock_verdict_data_ready() has no equivalent guard. When a socket is inserted into a sockmap (BPF_SK_SKB_VERDICT) before TLS RX is configured, tls_sw_strparser_arm() saves sk_psock_verdict_data_ready as rx_ctx->saved_data_ready. On data arrival: tls_data_ready -> tls_strp_data_ready -> tls_rx_msg_ready -> saved_data_ready() = sk_psock_verdict_data_ready() -> tcp_read_skb() drains sk_receive_queue via __skb_unlink() without calling tcp_eat_skb(), so copied_seq is not advanced. tls_strp_msg_load() then finds tcp_inq() >= full_len (stale), calls tcp_recv_skb() on the now-empty queue, hits WARN_ON_ONCE(!first), and returns with rx_ctx->strp.anchor.frag_list pointing at a psock-owned (potentially freed) skb. tls_decrypt_sg() subsequently walks that frag_list: use-after-free. Apply the same fix as sk_psock_strp_data_ready(): if a TLS RX context is present, call psock->saved_data_ready (sock_def_readable) to wake recv() waiters and return immediately, leaving the receive queue untouched. TLS retains sole ownership of the queue and decrypts the record normally through tls_sw_recvmsg(). | ||||
| CVE-2026-64030 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: bounds-check link_id in ieee80211_ml_epcs IEEE80211_MLE_STA_EPCS_CONTROL_LINK_ID is 0x000f, so link_id extracted from a PRIO_ACCESS ML element PER_STA_PROFILE subelement can be 0..15. sdata->link[] has IEEE80211_MLD_MAX_NUM_LINKS (15) entries (indices 0..14), making index 15 out-of-bounds. A connected WiFi 7 AP can trigger this by sending an EPCS Enable Response action frame with a PER_STA_PROFILE subelement where link_id = 15. The unsolicited-notification path (dialog_token = 0) is reachable any time EPCS is already enabled, without any prior client request. sdata->link[15] reads into the first word of sdata->activate_links_work (a wiphy_work whose embedded list_head is non-NULL after INIT_LIST_HEAD), so the NULL check on the result does not catch the invalid access. The garbage pointer is then passed to ieee80211_sta_wmm_params(), which dereferences link->sdata and crashes the kernel. The same class of bug was fixed for ieee80211_ml_reconfiguration() by commit 162d331d833d ("wifi: mac80211: bounds-check link_id in ieee80211_ml_reconfiguration"). | ||||
| CVE-2026-64031 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix managed cache race for unaligned extents After unaligned compressed extents were introduced, the following race could occur: [Thread 1] [Thread 2] (z_erofs_fill_bio_vec) <handle a Z_EROFS_PREALLOCATED_FOLIO folio> ... filemap_add_folio (1) (z_erofs_bind_cache) <the same folio is found..> .. .. folio_attach_private (2) filemap_add_folio (3) again Since (1) is executed but (2) hasn't been executed yet, it's possible that another thread finds the same managed folio in z_erofs_bind_cache() for a different pcluster and calls filemap_add_folio() again since folio->private is still Z_EROFS_PREALLOCATED_FOLIO. Fix this by explicitly clearing folio->private before making the folio visible in the managed cache so that another pcluster can simply wait on the locked managed folio as what we did for other shared cases [1]. This only impacts unaligned data compression (`-E48bit` with zstd, for example). [1] Commit 9e2f9d34dd12 ("erofs: handle overlapped pclusters out of crafted images properly") was originally introduced to handle crafted overlapped extents, but it addresses unaligned extents as well. | ||||
| CVE-2026-64033 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs: Fix use-after-free in path file creation cleanup In the error path of rtrs_srv_create_path_files(), the sysfs root folders may already have been created and srv_path->kobj may already have been initialized. If a later step fails, the cleanup currently calls kobject_put(&srv_path->kobj) before rtrs_srv_destroy_once_sysfs_root_folders(srv_path). kobject_put() may drop the last reference to srv_path->kobj and invoke the release callback, rtrs_srv_release(), which frees srv_path. The following call to rtrs_srv_destroy_once_sysfs_root_folders(srv_path) then dereferences srv_path internally to access srv_path->srv, resulting in a use-after-free. This failure path is reached before rtrs_srv_create_path_files() returns success, so the successful-path lifetime handling is not involved. Fix this by destroying the sysfs root folders before calling kobject_put(&srv_path->kobj), so srv_path is still valid while the helper accesses it. This issue was found by a static analysis tool I am developing. | ||||
| CVE-2026-64034 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix TOCTOU double-fetch of hwc_msg_id from DMA buffer In mana_hwc_rx_event_handler(), resp->response.hwc_msg_id is read from DMA-coherent memory and bounds-checked, then mana_hwc_handle_resp() re-reads the same field from the same DMA buffer for test_bit() and pointer arithmetic. DMA-coherent memory is mapped uncacheable on x86 and is shared, unencrypted, in Confidential VMs (SEV-SNP/TDX), so each load goes directly to host-visible memory. A H/W can modify the value between the check and the use, bypassing the bounds validation. Fix this by reading hwc_msg_id exactly once using READ_ONCE() into a stack-local variable in mana_hwc_rx_event_handler(), and passing the validated value as a parameter to mana_hwc_handle_resp(). | ||||
| CVE-2026-64036 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cgroup/rstat: validate cpu before css_rstat_cpu() access css_rstat_updated() is exposed as a BPF kfunc and accepts a caller-provided cpu argument. The function uses cpu for per-cpu rstat lookups without checking whether it refers to a valid possible CPU. A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass an invalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu == 0x7fffffff triggers: UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9 index 2147483647 is out of range for type 'long unsigned int [64]' Call Trace: css_rstat_updated bpf_iter_run_prog cgroup_iter_seq_show bpf_seq_read Add cpu validation to the BPF-facing css_rstat_updated() kfunc and move the common implementation to __css_rstat_updated() for in-kernel callers. | ||||
| CVE-2026-64039 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/snapshot: fix dumping of the unaligned regions The snapshotting code internally aligns data segment to 16 bytes. This works fine for DPU code (where most of the regions are aligned), but fails for snapshotting of the DSI data (because DSI data region is shifted by 4 bytes). Fix the code by removing length alignment and by accurately printing last registers in the region. While reworking the code also fix the 16x memory overallocation in msm_disp_state_dump_regs(). Patchwork: https://patchwork.freedesktop.org/patch/725449/ | ||||
| CVE-2026-64059 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix folio->private handling in netfs_perform_write() Under some circumstances, netfs_perform_write() doesn't correctly manipulate folio->private between NULL, NETFS_FOLIO_COPY_TO_CACHE, pointing to a group and pointing to a netfs_folio struct, leading to potential multiple attachments of private data with associated folio ref leaks and also leaks of netfs_folio structs or netfs_group refs. Fix this by consolidating the place at which a folio is marked uptodate in one place and having that look at what's attached to folio->private and decide how to clean it up and then set the new group. Also, the content shouldn't be flushed if group is NULL, even if a group is specified in the netfs_group parameter, as that would be the case for a new folio. A filesystem should always specify netfs_group or never specify netfs_group. The Sashiko auto-review tool noted that it was theoretically possible that the fpos >= ctx->zero_point section might leak if it modified a streaming write folio. This is unlikely, but with a network filesystem, third party changes can happen. It also pointed out that __netfs_set_group() would leak if called multiple times on the same folio from the "whole folio modify section". | ||||
| CVE-2026-64074 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/statmount: fix slab out-of-bounds write in statmount_mnt_idmap statmount_mnt_idmap() writes one mapping with seq_printf() and then manually advances seq->count to include the NUL separator. If seq_printf() overflows, seq_set_overflow() sets seq->count to seq->size. The manual seq->count++ changes this to seq->size + 1. seq_has_overflowed() then no longer detects the overflow. The corrupted count returns to statmount_string(), which later executes: seq->buf[seq->count++] = '\0'; This causes a 1-byte NULL out-of-bounds write on the dynamically allocated seq buffer. Fix this by checking for overflow immediately after seq_printf(). | ||||
| CVE-2026-64075 | 1 Linux | 1 Linux Kernel | 2026-07-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fprobe: Fix unregister_fprobe() to wait for RCU grace period Commit 4346ba1604093 ("fprobe: Rewrite fprobe on function-graph tracer") changed fprobe to register struct fprobe to an rcu-hlist, but it forgot to wait for RCU GP. Thus there can be use-after-free if the fprobe is released right after unregistering. This can be happened on fprobe event and sample module code. To fix this issue, add synchronize_rcu() in unregister_fprobe(). Note that BPF is OK because fprobe is used as a part of bpf_kprobe_multi_link. This unregisters its fprobe in bpf_kprobe_multi_link_release() and it is deallocated via bpf_kprobe_multi_link_dealloc(), which is invoked from bpf_link_defer_dealloc_rcu_gp() RCU callback. For BPF, this also introduced unregister_fprobe_async() which does NOT wait for RCU grace priod. | ||||
| CVE-2026-64093 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: directly shut down timer on cleanup batadv_tp_sender_cleanup() was calling timer_delete_sync() followed by timer_delete() to guard against the timer handler re-arming itself between the two calls. This double-deletion hack relied on the sending status being set to 0 to suppress re-arming. Replace both calls with a single timer_shutdown_sync(). This function both waits for any running timer callback to complete (like timer_delete_sync()) and permanently disarms the timer so it cannot be re-armed afterwards, making re-arming prevention unconditional and self-documenting. The re-arming property is also required because otherwise: 1. context 0 (batadv_tp_recv_ack()) checks in batadv_tp_reset_sender_timer() if sending is still 1 -> it is 2. context 1 changes in batadv_tp_sender_shutdown() sending to 0 and in this process forces the kthread to stop timer in batadv_tp_sender_cleanup() 3. context 0 continues in batadv_tp_reset_sender_timer() and rearms the timer -> but the reference for it is already gone | ||||
| CVE-2026-64102 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Reject MPA FPDU length underflow before signed receive math A malicious connected siw peer can send an iWARP FPDU whose MPA length field (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smaller than the fixed DDP/RDMAP header for the announced opcode. Soft-iWARP parses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode] .hdr_len, but never compares mpa_len against that header length. siw_tcp_rx_data() then derives srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd + MPA_HDR_SIZE; where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at this point. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smallest on-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len below hdr_len - MPA_HDR_SIZE underflows to a negative int. The signed value then flows into siw_proc_write()/siw_proc_rresp() as bytes = min(srx->fpdu_part_rem, srx->skb_new); is handed to siw_check_mem() as an int len (whose interval check addr + len > mem->va + mem->len is satisfied for a valid base when len is negative), and reaches siw_rx_data() -> siw_rx_kva() / siw_rx_umem() -> skb_copy_bits() as a signed copy length. The header copy branch in skb_copy_bits() promotes that to size_t, producing a multi-gigabyte read. KASAN under a KUnit harness that drives the real kernel TCP receive path -- a loopback AF_INET socketpair, the malformed FPDU written via kernel_sendmsg, sk_data_ready firing in softirq, tcp_read_sock dispatching to siw_tcp_rx_data -- reports: BUG: KASAN: use-after-free in skb_copy_bits+0x284/0x480 Read of size 4294967295 at addr ffff888... Call Trace: skb_copy_bits siw_rx_kva siw_rx_data siw_check_mem siw_proc_write siw_tcp_rx_data __tcp_read_sock siw_qp_llp_data_ready tcp_data_ready tcp_data_queue Add the missing invariant at the earliest point where the peer header is fully assembled. iwarp_pktinfo[*].hdr_len - MPA_HDR_SIZE is exactly the value the siw transmitter uses as the minimum mpa_len for each opcode (drivers/infiniband/sw/siw/siw_qp.c:33), so this matches the protocol contract. Out-of-range FPDUs terminate the connection with TERM_ERROR_LAYER_LLP / LLP_ETYPE_MPA / LLP_ECODE_FPDU_START -- which is RFC 5044 Section 8 error code 3 ("Marker and ULPDU Length fields do not agree on the start of an FPDU"), the correct framing-error class for this inconsistency. | ||||
| CVE-2026-64110 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: igc: fix potential skb leak in igc_fpe_xmit_smd_frame() When igc_fpe_init_tx_descriptor() fails, no one takes care of an allocated skb, leaking it. [1] Use dev_kfree_skb_any() on failure. Tested on an I226 adapter with the following command, while injecting faults in igc_fpe_init_tx_descriptor() to trigger the error path. # ethtool --set-mm $DEV verify-enabled on tx-enabled on pmac-enabled on [1] unreferenced object 0xffff888113c6cdc0 (size 224): ... backtrace (crc be3d3fda): kmem_cache_alloc_node_noprof+0x3b1/0x410 __alloc_skb+0xde/0x830 igc_fpe_xmit_smd_frame.isra.0+0xad/0x1b0 igc_fpe_send_mpacket+0x37/0x90 ethtool_mmsv_verify_timer+0x15e/0x300 | ||||
| CVE-2026-64111 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: lsm: hold cred_guard_mutex for lsm_set_self_attr() Just as proc_pid_attr_write() already does before calling the LSM hook. This only matters for SELinux and AppArmor which check whether the process is being ptraced and if so, whether to allow the transition. | ||||
| CVE-2026-64114 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: raw: reject IP_HDRINCL packets with ihl < 5 raw_send_hdrinc() validates that the caller-supplied IPv4 header fits within the message length: iphlen = iph->ihl * 4; err = -EINVAL; if (iphlen > length) goto error_free; if (iphlen >= sizeof(*iph)) { /* fix up saddr, tot_len, id, csum, transport_header */ } It does not, however, reject ihl < 5. For such a packet the "if (iphlen >= sizeof(*iph))" branch is skipped, leaving the crafted iphdr untouched, but the packet is still handed to __ip_local_out() and onward. Downstream consumers that read iph->ihl assume a sane value: net/ipv4/ah4.c:ah_output() in particular subtracts sizeof(struct iphdr) from top_iph->ihl * 4 and passes the (signed-int-negative, then cast to size_t) result to memcpy(), producing an OOB access of length close to SIZE_MAX and a host kernel panic. An IPv4 header with ihl < 5 is malformed by definition (RFC 791: "Internet Header Length is the length of the internet header in 32 bit words ... Note that the minimum value for a correct header is 5."). The kernel should not be willing to inject such a packet into its own output path. Reject "iphlen < sizeof(*iph)" alongside the existing "iphlen > length" check. This matches the principle that locally constructed packets that re-enter the IP stack must pass the same basic sanity tests that a foreign packet would be subjected to. Once this lands, the "if (iphlen >= sizeof(*iph))" wrapper around the fixup branch becomes redundant; left in place to keep the patch minimal and backport-friendly. A follow-up can unwrap it. Note that commit 86f4c90a1c5c ("ipv4, ipv6: ensure raw socket message is big enough to hold an IP header") ensures the message buffer is large enough to hold an iphdr, but does not constrain the self-reported iph->ihl. Reachability: the malformed packet source is any caller with CAP_NET_RAW, including an unprivileged process in a user+net namespace on a kernel with CONFIG_USER_NS=y. The reproduced AH crash also requires a matching xfrm AH policy on the outgoing route; a container granted CAP_NET_ADMIN can install that state and policy in its netns. Loopback bypasses xfrm_output, so the trigger uses a real netdev. Reproduced on UML + KASAN: kernel-mode fault at addr 0x0 with memcpy_orig at the crash site. Same shape reproduces inside a rootless Docker container with --cap-add NET_ADMIN on a stock distro kernel. | ||||
| CVE-2026-64117 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb ieee80211_invoke_fast_rx() reads RX status through IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the unicast forward path, mesh_data does: info = IEEE80211_SKB_CB(fwd_skb); memset(info, 0, sizeof(*info)); on the same skb the caller still names via rx->skb, then either queues the skb for TX (success) or kfree_skb()'s it (no-route) before returning RX_QUEUED. The caller's RX_QUEUED arm then calls sta_stats_encode_rate(status) on memory that is either zeroed (success path) or freed (no-route path). The latter is KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle. Fix by encoding the rate from status before invoking ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value captured while status was still backed by valid memory. | ||||