Export limit exceeded: 23172 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23172 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-55952 | 1 Erlang | 3 Erlang/otp, Erlang\/otp, Otp | 2026-07-03 | 7.5 High |
| The Erlang/OTP ssl application does not validate that the PSK identity list and binder list carried in a TLS 1.3 ClientHello pre-shared key extension have equal length before passing them to the session ticket handler. In tls_handshake_1_3:handle_pre_shared_key/3, an OfferedPreSharedKeys record with a mismatched number of identities and binders is forwarded directly to tls_server_session_ticket:use/4, which crashes the session ticket handler process. An unauthenticated remote attacker can send a single crafted ClientHello to a TLS 1.3 server with session tickets enabled (stateful or stateless mode) and permanently disrupt session ticket handling on that listener. New TLS 1.3 handshakes complete but subsequently crash when the server attempts to issue a session ticket, effectively making TLS 1.3 unusable on the affected listener until the ssl application is restarted. TLS 1.2 connections are not affected. This issue affects OTP from 22.2 before 29.0.3, 28.5.0.3 and 27.3.4.14 corresponding to ssl from 9.5 before 11.7.3, 11.6.0.3 and 11.2.12.10. | ||||
| CVE-2026-50195 | 1 Containerd | 1 Containerd | 2026-07-03 | 6.7 Medium |
| containerd is an open-source container runtime. Versions prior to 2.3.2, 2.2.5 and 2.1.9 contain a vulnerability in the CRI checkpoint import process where it fails to validate the image references specified within a checkpoint image's configuration. An attacker with permissions to create pods can use a crafted checkpoint image to force containerd to pull a malicious image and assign it an arbitrary local tag, thereby poisoning the node's local image cache. Subsequently, if other pods on the same node attempt to use the poisoned tag with an IfNotPresent (or Never) pull policy, they will unknowingly execute the attacker's malicious image instead of the legitimate one. This can lead to a compromise of the affected pods, allowing the attacker to execute arbitrary code under the victim pod's identity. This issue has been fixed in versions 2.3.2, 2.2.5 and 2.1.9. | ||||
| CVE-2026-11946 | 2026-07-03 | 7.5 High | ||
| An unauthenticated remote attacker can exhaust server memory via the GetEndpoints Discovery Service in open62541. The endpointUrl field of GetEndpointsRequest is not validated for length. An attacker can declare an arbitrarily large string (up to ~4.09 GB via the UInt32 length field) delivered across intermediate chunks without ever sending the final chunk. The server buffers all chunks in RAM indefinitely until the SecureChannel times out. The attack is pre-session and bypasses all encryption configurations. The issue affects open62541: from 1.4.0 through 1.4.16, from 1.5.0 through 1.5.4, master. | ||||
| CVE-2026-8247 | 1 Watchguard | 1 Fireware Os | 2026-07-02 | N/A |
| An Out-of-bounds Write vulnerability in WatchGuard Fireware OS may allow an unauthenticated attacker on the same local network segment to execute arbitrary code. This vulnerability affects Fireware OS 11.0 up to and including 11.12.4_Update1, 12.0 up to and including 12.12 and 2025.1 up to and including 2026.2. | ||||
| CVE-2026-12912 | 2 Libtiff, Redhat | 4 Libtiff, Enterprise Linux, Hardened Images and 1 more | 2026-07-02 | 7.3 High |
| A flaw was found in libtiff. A remote attacker could exploit this vulnerability by providing a specially crafted PixarLog-compressed TIFF image. This issue occurs when decoding Pixarlog codec images with the PIXARLOGDATAFMT_8BITABGR output format and a specific stride value, leading to a heap-based buffer overflow. This could potentially result in arbitrary code execution or a denial of service (DoS). | ||||
| CVE-2026-44935 | 1 Suse | 1 Rancher | 2026-07-02 | 9.9 Critical |
| Missing validation of "valuesFrom" references in Helm Deployer of SUSE Rancher Fleet 0.15 before 0.15.2, 0.14 before 0.14.6, 0.13 before 0.13.11 and 0.12 before 0.12.15 could be used by owners of one tenant to access fleet credentials of other tenants. | ||||
| CVE-2026-53346 | 1 Linux | 1 Linux Kernel | 2026-07-02 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rust: arm64: set uwtable llvm module flag for CONFIG_UNWIND_TABLES Due to a rustc bug [1] the -Cforce-unwind-tables=y flag only emits the uwtable annotation for functions, but not for the module. This means that compiler-generated functions such as 'asan.module_ctor' do not receive the uwtable annotation. When CONFIG_UNWIND_PATCH_PAC_INTO_SCS is enabled, this leads to boot failures because the dwarf information emitted for the kasan constructors is wrong, which causes the SCS boot patching code to patch the constructor in an illegal manner. Specifically, the paciasp instruction is patched, but the autiasp instruction is not. This mismatch leads to a crash when the constructor is called during boot. ================================================================== BUG: KASAN: global-out-of-bounds in do_basic_setup+0x4c/0x90 Read of size 8 at addr ffffffe3cc7eb488 by task swapper/0/1 Specifically the faulting instruction is the (*fn)() to invoke the constructor in do_ctors() of the init/main.c file. Once the fix lands in rustc, this flag can be made conditional on the rustc version. Note that passing the flag on a rustc with the fix present has no effect. [ The fix [1] has landed for Rust 1.98.0 (expected release on 2026-08-20). Thus add a version check as discussed. - Miguel ] [ Adjusted link and comment. - Miguel ] | ||||
| CVE-2026-54908 | 1 Pion | 1 Dtls | 2026-07-02 | N/A |
| Pion DTLS is a Go implementation of Datagram Transport Layer Security. Versions prior to 3.1.4 are vulnerable to Remote Denial of Service via panic while parsing a crafted ECDHE_PSK ServerKeyExchange message. This issue has been fixed in version 3.1.4. | ||||
| CVE-2026-57623 | 2 Boldgrid, Wordpress | 2 W3 Total Cache, Wordpress | 2026-07-02 | 9 Critical |
| Unauthenticated Arbitrary Code Execution in W3 Total Cache <= 2.9.4 versions. | ||||
| CVE-2026-55688 | 2026-07-02 | 4 Medium | ||
| The AsyncHttpClient (AHC) library allows Java applications to easily execute HTTP requests and asynchronously process HTTP responses. In versions from 2.0.0 prior to 2.16.0 and from 3.0.0.Beta1 prior to 3.0.11, ThreadSafeCookieStore stored a cookie under the value of its Domain attribute without verifying that the responding host is allowed to set a cookie for that domain, leading to a cookie tossing / cookie injection issue. A host the client connects to can therefore plant a cookie scoped to an unrelated domain, and the client will then send that cookie on later requests to that domain. Applications that use a single AsyncHttpClient instance - and thus the default, shared CookieStore - to reach both an attacker-influenced host and a trusted host are impacted. This issue has been fixed in versions 2.16.0 and 3.0.11. | ||||
| CVE-2026-57269 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-02 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound. #### disconnect command index-out-of-bound | ||||
| CVE-2026-57270 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-02 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound. #### play command index-out-of-bound | ||||
| CVE-2026-57271 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-02 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. #### pause command index-out-of-bound | ||||
| CVE-2026-57273 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-02 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits. #### Buffer Overflow in username field (no key present) | ||||
| CVE-2026-57274 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-02 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits. #### Buffer Overflow in password field (no key present) | ||||
| CVE-2026-57268 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-02 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound. ### saveVideo command index-out-of-bound When sending the `saveVideo` command, the `index` field is extracted from the websocket message [1]. Then without checking the range of the index, it is used to trigger a CriticalSection ([2]) and releases it [3]. The release function call ([3]) is executed using a function pointer which will be read out of bounds potentially leading to code execution: v6 = get_entry(a2, "index"); result = json_is_value_int(v6); if ( (_BYTE)result ) { v8 = get_entry(a2, "index"); index = json_value_to_int(&v8->value); // [1] result = CCriticalSection::EnterCritSection(&this->crit_sections[index]); //[2] if ( result ) { if ( this->array_of_IPCams[index] ) { if ( this->array_of_IPCams[index]->field_20 ) do_PostMessageA((CViewer *)this->array_of_IPCams[index], 0x111u, 0x139Fu, v11); } return (*(int (__thiscall **)(CCriticalSection *))(this->crit_sections[index].vtbl + 20))(&this->crit_sections[index]); //[3] } } | ||||
| CVE-2026-57275 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-02 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits. #### Buffer Overflow in username field (key present) | ||||
| CVE-2026-57277 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-02 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits. #### Buffer Overflow in key field | ||||
| CVE-2026-57278 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-02 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. One of them, `connectionInfo` is meant to provide the necessary details to connect to a camera. The handler associated with this command that we call`handle_connection_info` contains multiple instances of string copy that can overflow. The function `handle_connect_info` copies attacker-controlled JSON strings into fixed-size buffers using manual byte-by-byte loops that do not enforce length limits. #### Buffer Overflow in ip field | ||||
| CVE-2026-57264 | 1 Geovision Inc. | 1 Geowebplayer | 2026-07-02 | 8.3 High |
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound. #### setPIP command index-out-of-bound | ||||