Export limit exceeded: 380847 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (380847 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74553 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775-core) Fix number of temperature registers for NCT6116 Unlike NCT6106, NCT6116 only has three temperature registers, and with it only three temperature source and temperature source configuration registers. The register addresses match those of NCT6106 and can be re-used. The code used a separate array to list the temperature source registers for NCT6116, but used the size of the NCT6106 register array to set the number of registers. The NCT6106 register array provides six addresses, while the temperature source register array for NCT6116 only provides three addresses. This causes a KASAN report. BUG: KASAN: global-out-of-bounds in nct6775_probe+0x936/0x46f0 [nct6775] Read of size 2 at addr ffffffffc19561a6 by task modprobe/954 ... Call Trace: dump_stack+0x7d/0xa7 print_address_description.constprop.0+0x1c/0x220 ? __kasan_kmalloc.constprop.0+0xc9/0xd0 ? __kmalloc_node_track_caller+0x194/0x5b0 ? nct6775_probe+0x936/0x46f0 [nct6775] ? nct6775_probe+0x936/0x46f0 [nct6775] ... Fix the problem by hard-coding the number of temperature and temperature configuration registers to three for NCT6116. Drop the unnecessary NCT6116_REG_TEMP_SOURCE array and re-use NCT6106_REG_TEMP_SOURCE. | ||||
| CVE-2026-74552 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (lm90) Only report alarms if driver is ready Userspace can read sysfs attributes before driver registration is complete, immediately after devm_hwmon_device_register_with_info() has been called. At that time, data->hwmon_dev is not yet initialized. This can trigger a NULL pointer access since lm90_update_device() and with it lm90_update_alarms_locked() will be called. This call schedules report_work and lm90_report_alarms(), which passes the still-NULL data->hwmon_dev to hwmon_notify_event() and triggers a NULL pointer dereference. Fix the problem by only scheduling the report and alert workers data->hwmon_dev is set. | ||||
| CVE-2026-74551 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (nzxt-smart2) DMA-align output buffer Sashiko reports: When send_output_report() calls hid_hw_output_report(), the underlying USB HID core calls usb_interrupt_msg() which maps this buffer directly for DMA. When the DMA mapping flushes or invalidates the cacheline, it will corrupt the adjacent variables (mutex, update_interval) that were modified concurrently by the CPU. This causes memory corruption due to cacheline sharing on non-coherent CPU architectures (such as ARM or MIPS). The DMA API debugging tool (CONFIG_DMA_API_DEBUG) will trigger runtime warnings for this violation. Any operation that triggers send_output_report() (like setting a fan speed or updating the interval) causes the USB DMA mapping. On systems with non-coherent caches, this structural bug causes immediate and deterministic memory corruption. Align the output buffer to ARCH_DMA_MINALIGN to fix the problem. | ||||
| CVE-2026-74550 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: do not send ICMP/NDISC Redirects when peer allocation fails When inet_getpeer_v4() or inet_getpeer_v6() fails to allocate a peer entry under memory pressure or tree size caps, redirect handlers previously fell back to sending un-rate-limited ICMP/NDISC Redirect messages. In IPv4, ip_rt_send_redirect() called icmp_send() directly when peer == NULL. In IPv6, ip6_forward() and ndisc_send_redirect() passed a NULL peer into inet_peer_xrlim_allow(), which returned true when peer == NULL. Because ICMP/NDISC Redirects are not part of the default global rate limit mask (sysctl_icmp_ratemask), sending redirects when peer == NULL creates an un-rate-limited ICMP packet storm. Fix this by failing closed in ip_rt_send_redirect(), ip6_forward(), and ndisc_send_redirect() when peer is NULL. | ||||
| CVE-2026-74549 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775-core) Prevent access to unsupported weight registers Sashiko reports: During initialization of the nct6116 chip, the driver sets data->pwm_num to 5. However, it assigns several NCT6106 register arrays (such as NCT6106_REG_WEIGHT_DUTY_STEP, NCT6106_REG_WEIGHT_TEMP_SEL, and NCT6106_REG_WEIGHT_TEMP_*) to data->REG_PWM and data->REG_WEIGHT_TEMP. These arrays only contain 3 elements. In nct6775_update_pwm(), the driver iterates up to data->pwm_num. If data->has_pwm has bits 3 or 4 set (which is structurally possible for nct6116), the loop attempts to read elements at index 3 and 4 from these 3-element arrays. This results in a global out-of-bounds read, which can be caught by KASAN. Furthermore, the driver uses these garbage out-of-bounds values as hardware register addresses for subsequent read and write operations. This leads to invalid hardware register access, potentially causing hardware misconfiguration or system crashes. The underlying problem is that the chip does support up to five fan control channels, but only the first three support weight control. Fix the problem by extending the affected weight register arrays with zeroed fields. The driver uses zeroed register addresses to determine if a register is supported or not, and skips accesses for unsupported registers. | ||||
| CVE-2026-17272 | 1 Ibm | 1 I | 2026-08-19 | 8.2 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to a buffer overflow. | ||||
| CVE-2026-74548 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: forcedeth: fix UAF of txrx_stats in nv_remove nv_remove() frees the per-CPU txrx_stats before unregister_netdev(). Until unregister completes, ndo_get_stats64, the NAPI/xmit data path, and nv_close()/drain may still access txrx_stats, leading to a use-after-free. Free the stats only after unregister_netdev(). | ||||
| CVE-2026-74547 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (adt7470) Fix busy-loop and I2C flooding in update thread When userspace configures 'auto_update_interval' to 0 via sysfs, the background kthread executes schedule_timeout_interruptible(0), which returns immediately. If 'num_temp_sensors' is concurrently or previously set to 0, the msleep_interruptible() delay inside adt7470_read_temperatures() also becomes 0. This combination forces the background thread into a tight, unbounded busy-loop, hogging the CPU and flooding the I2C bus with a continuous stream of transactions. Fix this vulnerability by raising the lower limit of the clamp_val in auto_update_interval_store() from 0 to 500 milliseconds. This guarantees a reasonable minimum sleep window between sensor updates, protecting the system from intentional or accidental I2C bus denial of service. | ||||
| CVE-2026-74546 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (adt7470) Fix divide-by-zero TOCTOU crash in fan speed read If the fan data becomes 0 between the FAN_DATA_VALID() check and the FAN_PERIOD_TO_RPM() conversion, it will result in a divide-by-zero crash due to a race with a concurrent update of the cached fan value. Fix a TOCTOU issue by reading fan data once. | ||||
| CVE-2026-74540 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix UAF in l2cap_le_connect_rsp l2cap_le_connect_rsp() obtains a channel via __l2cap_get_chan_by_ident() but neither holds a reference nor uses l2cap_chan_hold_unless_zero() before locking and operating on it. A concurrent l2cap_chan_del() triggered by a remote disconnect can free the channel between the lookup and l2cap_chan_lock(), causing a use-after-free. The BR/EDR counterpart l2cap_connect_rsp() and the sibling handler l2cap_le_command_rej() already use l2cap_chan_hold_unless_zero() to safely hold a reference, but l2cap_le_connect_rsp() was left unprotected. Fix by adding l2cap_chan_hold_unless_zero() after the ident lookup and l2cap_chan_put() on the exit path, consistent with other L2CAP response handlers. | ||||
| CVE-2026-74525 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: sxgbe: free TX rings on RX allocation failure When RX descriptor ring allocation fails, init_dma_desc_rings() only frees the partially allocated RX rings and returns. The TX rings that were allocated earlier in the same function are leaked. Rearrange error labels to clean up TX rings upon RX failures. | ||||
| CVE-2026-74523 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: qede: sync udp_tunnel ports outside qede_lock in the recovery path A TX timeout on a qede NIC that has VXLAN/GENEVE tunnel ports configured wedges the rtnetlink control plane of the whole machine: NETDEV WATCHDOG: ens6f1 (qede): transmit queue 2 timed out 10226 ms [qede_tx_timeout:586(ens6f1)]TX timeout on queue 2! [qede_recovery_handler:2665(ens6f0)]Starting a recovery process The recovery path deadlocks on the driver's own mutex: qede_sp_task rtnl_lock() mutex_lock(&edev->qede_lock) <- taken qede_recovery_handler qede_load udp_tunnel_nic_reset_ntf __udp_tunnel_nic_device_sync info->sync_table == qede_udp_tunnel_sync mutex_lock(&edev->qede_lock) <- same task: deadlock The mutex is not recursive, so the kworker blocks on itself with rtnl_lock held, and neither lock is ever released. Every task that calls rtnl_lock() afterwards (ip, ovs-vswitchd, lldpad, IPv6 addrconf, sshd) blocks forever while the node still answers ping. In a vmcore from an affected production node rtnl_mutex.owner decodes to the very kworker blocked at the innermost mutex_lock() above. Re-sync the tunnel ports from qede_sp_task() after the internal lock is dropped, still under rtnl_lock as the udp_tunnel API requires. This mirrors qede_open(), which calls udp_tunnel_nic_reset_ntf() under rtnl without the internal lock. qede_recovery_handler() now returns whether it has successfully reloaded an open device, and the caller re-syncs the ports only in that case. This keeps the old gating exactly: a device that was down or a failed recovery returns false, as those paths never reached the udp_tunnel_nic_reset_ntf() call before either. This was the only user of the qede_lock()/qede_unlock() helpers, so remove them. | ||||
| CVE-2026-74522 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in __close_file_table_ids() A ksmbd_file can remain alive after logical close while another session holds a temporary reference obtained through ksmbd_lookup_fd_inode(). ksmbd_close_fd() currently marks the file closed and drops the idr-owned reference, but leaves the pointer published in the closing session's idr until the final reference is dropped. If the foreign holder performs the final ksmbd_fd_put(), __put_fd_final() supplies the foreign session's file table to __ksmbd_close_fd(). The object is then freed without being removed from its owner's idr, and the owner session later dereferences the stale pointer during file-table teardown. Remove the volatile id from the owner's idr while ksmbd_close_fd() still holds that table's lock, and clear volatile_id before dropping the idr-owned reference. A later foreign final put then only performs physical destruction and cannot remove the object from the wrong table. | ||||
| CVE-2026-17438 | 1 Ibm | 1 I | 2026-08-19 | 4.4 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a local attacker to obtain sensitive information or modify data due to improper privilege management. | ||||
| CVE-2026-74519 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: devicetree: don't free uninitialized dev_name on error path dt_remember_or_free_map() duplicates dev_name for each map entry. If kstrdup_const() fails, dt_free_map() frees dev_name in all num_maps entries, including entries that have not been initialized. Some pinctrl drivers, including pinctrl-imx, allocate the map with kmalloc() and leave dev_name for the core to initialize. The untouched entries therefore contain uninitialized data which is passed to kfree_const(). Reproduced on qemu's mcimx6ul-evk (pinctrl-imx) with failslab injection while binding the pinctrl-consuming device, under KASAN: BUG: KASAN: double-free in dt_free_map+0x34/0xa4 Free of addr c425a900 by task init/1 kfree from dt_free_map+0x34/0xa4 dt_free_map from dt_remember_or_free_map+0x184/0x198 dt_remember_or_free_map from pinctrl_dt_to_map+0x33c/0x4c8 pinctrl_dt_to_map from create_pinctrl+0x9c/0x5c0 Initialize all dev_name fields to NULL before duplicating the device name, making the full-map cleanup safe after a partial failure. | ||||
| CVE-2026-74518 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix list corruption in allocate_file_region_entries() allocate_file_region_entries() tops up resv->region_cache with freshly allocated file_region descriptors. The allocation uses GFP_KERNEL, so resv->lock is dropped around it: the new entries are gathered on a stack-local list head, allocated_regions, and spliced into resv->region_cache once the lock is re-acquired. The splice used list_splice(), which moves the entries but does not re-initialize the source head, so allocated_regions is left pointing at an entry that now lives on resv->region_cache. The top-up runs in a while loop that re-checks the cache deficit after re-acquiring the lock. For a shared mapping the resv_map is shared by every mapper of the hugetlbfs inode, so a concurrent region_chg()/region_add()/region_del() on the same resv_map can consume cache entries during the unlocked window and force a second iteration. That iteration calls list_add() on the stale head and corrupts the list; with CONFIG_DEBUG_LIST the __list_add_valid() check trips: list_add corruption. next->prev should be prev (ffffc900011ff7f8), but was ffff88814c281460. (next=ffff88814c545640). kernel BUG at lib/list_debug.c:31! allocate_file_region_entries+0x191/0x420 region_chg+0x267/0x300 hugetlb_reserve_pages+0x387/0xc80 hugetlbfs_file_mmap+0x2ce/0x3f0 mmap_region+0x1348/0x1a80 do_mmap+0x85e/0xb90 vm_mmap_pgoff+0x18c/0x330 ksys_mmap_pgoff+0x2a1/0x3e0 do_syscall_64+0xd7/0x420 Without CONFIG_DEBUG_LIST the bad list_add() silently links a kernel-stack address into resv->region_cache, leading to later use-after-free. This was observed as a real host panic on a dense KVM host where a QEMU guest-RAM hugetlbfs file was mapped MAP_SHARED by both QEMU and a separate SPDK/DPDK vhost-user target, generating concurrent region_* traffic on one shared resv_map. Use list_splice_init() so the source head is re-initialized empty after each splice, making the retry loop safe. | ||||
| CVE-2026-74516 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Update x2APIC MSR intercepts if AVIC is inhibited while L2 is active Always update x2APIC MSR intercepts for L1 when AVIC is deactivated, even if L2 is active and KVM is using a separate MSR bitmap to run L2. If AVIC is fully enabled prior to running L2, and is then inhibited while L2 is active (for a VM-scoped inhibit), then KVM will run L1 with AVIC disabled, but with x2APIC MSR intercepts disabled, i.e. will allow L1 to read most of the host's APIC state, send arbitrary interrupts, change task priority, and ultimately trivially DoS the host. E.g. sending a self-IPI in L1 on HYPERV_REENLIGHTENMENT_VECTOR, 0xee, with CONFIG_HYPERV=n in the host kernel as a "safe" PoC, yields: Spurious interrupt (vector 0xee) on CPU#425. Acked And hacking KVM to abuse kvm_set_posted_intr_wakeup_handler() to register a handler and WARN on POSTED_INTR_WAKEUP_VECTOR yields: ------------[ cut here ]------------ WARNING: arch/x86/kvm/svm/svm.c:5594 at pi_wakeup_handler+0x9/0x10 [kvm_amd], CPU#156: nested_x2apic_t/316940 CPU: 156 UID: 0 PID: 316940 Comm: nested_x2apic_t Tainted: G S U Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER Hardware name: Google Astoria-Turin/astoria, BIOS 0.20260209.0-0 02/09/2026 RIP: 0010:pi_wakeup_handler+0x9/0x10 [kvm_amd] Call Trace: <IRQ> sysvec_kvm_posted_intr_wakeup_ipi+0x64/0x80 </IRQ> <TASK> asm_sysvec_kvm_posted_intr_wakeup_ipi+0x1a/0x20 RIP: 0010:vcpu_run+0x1430/0x1e40 [kvm] kvm_arch_vcpu_ioctl_run+0x2c1/0x600 [kvm] kvm_vcpu_ioctl+0x580/0x6b0 [kvm] __se_sys_ioctl+0x6d/0xb0 do_syscall_64+0x10a/0x480 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x46ff4b </TASK> ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2026-74515 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: Reject adapter interrupt forwarding if already enabled The MPCIFC instruction doesn't allow registering adapter interrupts without first unregistering. So reject any request to enable interrupt forwarding if its already enabled for the zPCI device. This also fixes overwriting and thus leaking resources when the ioctl is called multiple times for the same device. | ||||
| CVE-2026-74514 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: Fix memory accounting for pinned/unpinned pages The account_mem() and unaccount_mem() functions call get_uid() which increments the reference count of struct user_struct on every invocation. But we don't decrement the count by calling free_uid(). It also accounted/unaccounted the pages against the current->mm. But its possible the unaccount_mem() can be called from a different process context than the one that originally pinned the pages. Let's fix this by storing the pinning process user_struct and mm_struct when accounting for pinned pages, and subsequently free these resources when the pages are unpinned. [borntraeger@linux.ibm.com: Fixed whitespace] | ||||
| CVE-2026-74964 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-08-19 | 9.8 Critical |
| Integer overflow in the Graphics component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. | ||||