Export limit exceeded: 382570 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 382570 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (382570 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74581 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv6: clear suppressed fib6 rule result fib6_rule_suppress() drops a suppressed route with ip6_rt_put_flags(), but leaves res->rt6 pointing at the released rt6_info. If no later rule supplies a replacement, fib6_rule_lookup() still sees res.rt6 and returns that stale dst to its caller. A suppressing rule can therefore leak a released route back to rt6_lookup(), and the next put hits rcuref_put_slowpath() from dst_release(). Clear res->rt6 when suppressing the route so suppressed lookups fall through to the null dst instead of reusing the released one. | ||||
| CVE-2026-74580 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost: reset the vring metadata cache on vring reconfiguration vq->meta_iotlb[] caches the vhost_iotlb_map that backs each vring metadata region, and iotlb_access_ok() returns early on a cache hit, taking the hit as proof that the region has already been validated: if (vhost_vq_meta_fetch(vq, addr, len, type)) return true; The cache is reset on VHOST_IOTLB_UPDATE and VHOST_IOTLB_INVALIDATE, on device IOTLB (re)initialisation and on vq reset, but not when VHOST_SET_VRING_ADDR replaces vq->desc, vq->avail and vq->used, nor when VHOST_SET_VRING_NUM changes the region sizes. With a device IOTLB attached both ioctls are accepted while the vq is live, and neither validates the addresses at ioctl time: vq_access_ok() and vq_log_used_access_ok() return true early because the addresses are GIOVAs, deferring validation to prefetch time. Once the cache has been populated that deferred validation no longer runs -- vq_meta_prefetch() hits the stale entry and returns true -- and vhost_vq_meta_fetch() keeps translating through the old mapping as map->addr + addr - map->start for an address the mapping no longer covers. vhost_copy_to_user() and vhost_copy_from_user() consume the result with __copy_to_user() and __copy_from_user(), which do not check it either, so a subsequent used ring update or descriptor fetch accesses memory outside the region the IOTLB actually maps. Reset the metadata cache whenever the vring is reconfigured, so the new addresses are pushed back through iotlb_access_ok()'s slow path. | ||||
| CVE-2026-74579 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_payload: fix mask build for partial field offload nft_payload_offload_mask() builds the offload match mask for a payload expression that covers only part of a header field. For a partial IPv6 address match (field_len = 16, priv_len = 1) that shift is 1 << 120, which is undefined on the 32-bit int operand. It also trims only one word, so the remaining words stay 0xffffffff (and when priv_len is a multiple of 4 the trim is skipped entirely), leaving the mask covering more bytes than the rule matches. UBSAN: shift-out-of-bounds in net/netfilter/nft_payload.c:278:20 shift exponent 120 is too large for 32-bit type 'int' ... The match is byte-granular and struct nft_data is zero-initialised, so the correct mask is simply the first priv_len bytes set to 0xff. Set those bytes directly and drop the word/shift trimming; this removes the undefined shift and no longer over-masks the trailing bytes. | ||||
| CVE-2026-78466 | 2026-08-25 | 4.3 Medium | ||
| The Fluent Boards Pro plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 2.0.11 due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with Subscriber-level access and above, to perform an unauthorized action. | ||||
| CVE-2026-78467 | 2026-08-25 | 4.3 Medium | ||
| The Fluent Support Pro plugin for WordPress is vulnerable to unauthorized access due to a missing capability check on a function in all versions up to, and including, 2.3.1. This makes it possible for authenticated attackers, with Subscriber-level access and above, to perform an unauthorized action. | ||||
| CVE-2026-73867 | 1 Oracle | 1 Helidon | 2026-08-25 | 6.5 Medium |
| Vulnerability in the Helidon product of Oracle Fusion Middleware (component: Imperative Web Server). The supported version that is affected is 3.2.18. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Helidon. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Helidon accessible data as well as unauthorized read access to a subset of Helidon accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N). | ||||
| CVE-2026-73882 | 1 Oracle | 1 Helidon | 2026-08-25 | 7.5 High |
| Vulnerability in the Helidon product of Oracle Fusion Middleware (component: Imperative Web Server). The supported version that is affected is 3.2.19. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Helidon. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Helidon. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). | ||||
| CVE-2026-73884 | 1 Oracle | 1 Helidon | 2026-08-25 | 7.5 High |
| Vulnerability in the Helidon product of Oracle Fusion Middleware (component: Imperative Web Server). The supported version that is affected is 4.5.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Helidon. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Helidon accessible data. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N). | ||||
| CVE-2026-13214 | 1 Zephyrproject | 1 Zephyr | 2026-08-25 | 9.8 Critical |
| The OCPP 1.6 client in subsys/net/lib/ocpp/ocpp_j.c contains a stack buffer overflow in parse_getconfig_msg(). When handling a GetConfiguration request from the central system, the handler copied the attacker-controlled JSON "key" string into the caller's fixed 50-byte stack buffer (skey[CISTR50], declared in subsys/net/lib/ocpp/ocpp.c) using an unbounded strcpy(). The parsed key value points directly into the receive buffer, so its length is bounded only by the message size (CONFIG_OCPP_RECV_BUFFER_SIZE, default 2048). The GetConfiguration message is delivered over the WebSocket connection that the charge point opens to its configured central system. The reader thread ocpp_wsreader() reads the message into ui->recv_buf and dispatches it to parse_getconfig_msg() via the PDU function table. An attacker who controls the central system endpoint, or a man-in-the-middle on an unencrypted connection, can send a GetConfiguration request whose "key" field exceeds 50 bytes and overflow the reader thread's stack with attacker-chosen bytes. The consequence is a remotely triggerable stack smash on the OCPP reader thread: at minimum a denial of service, and plausibly remote code execution depending on build-time hardening such as stack canaries and MPU configuration. The fix replaces the strcpy() with a bounded strncpy(key, payload.key[0], CISTR50 - 1) followed by explicit NUL termination, matching the bounded copies already used by the sibling handlers. | ||||
| CVE-2026-13215 | 1 Zephyrproject | 1 Zephyr | 2026-08-25 | 6.8 Medium |
| The Zephyr ext2 filesystem driver fails to validate the s_log_block_size field of the on-disk superblock when mounting a filesystem. ext2_verify_disk_superblock() in subsys/fs/ext2/ext2_impl.c checks the magic number, revision, inode size and group counts, but never bounds s_log_block_size. On a successful verify, subsys/fs/ext2/ext2_ops.c computes fs->block_size = 1024 << superblock.s_log_block_size from this attacker-controlled uint32_t, so a crafted value either overflows the shift (undefined behaviour) or yields a block size far larger than CONFIG_EXT2_MAX_BLOCK_SIZE. That block size is then passed to k_mem_slab_init() by ext2_init_blocks_slab() to carve CONFIG_EXT2_MAX_BLOCK_COUNT blocks out of the fixed static buffer __ext2_block_memory_buffer, whose size is CONFIG_EXT2_MAX_BLOCK_COUNT * CONFIG_EXT2_MAX_BLOCK_SIZE. k_mem_slab_init() does not verify that the requested blocks fit the buffer, and the ext2 wrapper discards its return value, so the slab is laid out past the end of the static buffer. The mount immediately reads block-group, bitmap and inode blocks of fs->block_size bytes each into these slab blocks, producing an out-of-bounds write into adjacent static memory on the first block read. The entire path is gated only by data read from the mounted image, making this reachable by any attacker who can present a crafted ext2 image to a device that mounts it (for example a removable SD card or storage medium). Because the ext2 driver runs in kernel mode, supplying image bytes yields a supervisor-mode memory-corruption primitive, with impact ranging from denial of service to potential code execution. The fix rejects s_log_block_size values that overflow the shift (greater than 11) or that produce a block size exceeding CONFIG_EXT2_MAX_BLOCK_SIZE, so the block slab can no longer be initialized larger than its backing buffer. | ||||
| CVE-2026-34967 | 2 Adminer, Vrana | 2 Adminer, Adminer | 2026-08-25 | 5.4 Medium |
| Adminer versions 5.3.0 through 5.4.2 with the sql-log plugin enabled contain an arbitrary file write vulnerability in the ns parameter of plugins/sql-log.php. An authenticated user can supply path traversal sequences in the ns parameter to write arbitrary .sql files with attacker-controlled content to any writable directory on the host. | ||||
| CVE-2026-78679 | 2 Gitpython-developers, Gitpython Project | 2 Gitpython, Gitpython | 2026-08-25 | 6.5 Medium |
| GitPython before 3.1.59 contains an arbitrary file read vulnerability in TagReference.create() where a positional reference parameter bypasses the unsafe option guard. Attackers can supply a reference value like --file=<path> to read arbitrary files, with contents returned in the annotated tag message. | ||||
| CVE-2026-78638 | 1 Peerigon | 2 Unzip-crx, Unzip-crx-3 | 2026-08-25 | 3.3 Low |
| A flaw has been found in peerigon unzip-crx and unzip-crx-3 up to 0.2.0. This affects the function unzip of the file dist/index.js of the component Archive Extraction. Executing a manipulation of the argument destination can lead to path traversal. The attack can only be executed locally. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-77993 | 1 Joomlack | 1 Page Builder Ck Extension For Joomla | 2026-08-25 | N/A |
| Joomla Extension - joomlack.fr - Reflected XSS in Page Builder CK < 3.6.5 - The Joomla extension Page Builder CK is vulnerable to a reflected XSS via the iscontenttype parameter. | ||||
| CVE-2026-77994 | 1 Joomlack | 1 Page Builder Ck Extension For Joomla | 2026-08-25 | N/A |
| Joomla Extension - joomlack.fr - Second order SQL injection in Page Builder CK < 3.6.5 - The Joomla extension Page Builder CK is vulnerable to a SQL injection issue related to the loadStyles method of the frontend page model. | ||||
| CVE-2026-19892 | 2 Infused Addons, Wordpress | 2 Infusedwoo Pro, Wordpress | 2026-08-25 | 8.8 High |
| The InfusedWoo Pro plugin for WordPress is vulnerable to Privilege Escalation via Account Takeover in all versions up to, and including, 5.1.17. This is due to a missing capability check in the `ajax_iwar_preview_email()` function, which uses `is_admin()` as its only authorization check and allows low-privilege users to render email preview merge fields for an arbitrary email address. This makes it possible for authenticated attackers, with subscriber-level access and above, to generate and retrieve a valid password reset link for any WordPress user, including administrators, enabling account takeover. | ||||
| CVE-2026-19943 | 2 Jegstudio, Wordpress | 2 Gutenverse – Wordpress Blocks, Page Builder & Site Editor, Wordpress | 2026-08-25 | 6.4 Medium |
| The Gutenverse – WordPress Blocks, Page Builder & Site Editor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'titleTag' Block Attribute in all versions up to, and including, 4.0.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The malicious titleTag value survives wp_kses_post on save because it is stored inside a block-comment delimiter and the live HTML is only synthesized at render time by do_blocks(), meaning the payload also fires in administrator and editor sessions during post preview. | ||||
| CVE-2026-34968 | 2 Adminer, Vrana | 2 Adminer, Adminer | 2026-08-25 | 8.1 High |
| Adminer before 5.4.3 contains an arbitrary file deletion vulnerability in SQLite mode where the database-list drop action fails to validate file extensions before deletion. An authenticated attacker can submit arbitrary relative file paths in the db[] parameter to delete any files writable by the PHP process. | ||||
| CVE-2026-78376 | 1 Redhat | 1 Enterprise Linux | 2026-08-25 | 8.8 High |
| A flaw was found in WebKitGTK. Processing malicious web content can cause a use-after-free issue due to improper memory handling and result in memory corruption. | ||||
| CVE-2026-71869 | 1 Orval-labs | 1 Orval | 2026-08-25 | N/A |
| Orval generates type-safe JavaScript clients in TypeScript from OpenAPI v3 and Swagger v2 specifications. Prior to 8.21.0, a ${...} expression or backtick in an array item default is emitted into a module-level template literal emitted by zod schema generation without safe encoding. This permits attacker-controlled JavaScript to be evaluated when the generated zod schema module is imported, resulting in code execution in the developer, CI, test, or application environment. The affected code is packages/zod/src/index.ts function formatDefaultValue. This issue is fixed in version 8.21.0. | ||||