Export limit exceeded: 380292 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 380292 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 36145 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36145 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-52881 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2026-08-04 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tcp: do not accept ACK of bytes we never sent This patch is based on a detailed report and ideas from Yepeng Pan and Christian Rossow. ACK seq validation is currently following RFC 5961 5.2 guidelines: The ACK value is considered acceptable only if it is in the range of ((SND.UNA - MAX.SND.WND) <= SEG.ACK <= SND.NXT). All incoming segments whose ACK value doesn't satisfy the above condition MUST be discarded and an ACK sent back. It needs to be noted that RFC 793 on page 72 (fifth check) says: "If the ACK is a duplicate (SEG.ACK < SND.UNA), it can be ignored. If the ACK acknowledges something not yet sent (SEG.ACK > SND.NXT) then send an ACK, drop the segment, and return". The "ignored" above implies that the processing of the incoming data segment continues, which means the ACK value is treated as acceptable. This mitigation makes the ACK check more stringent since any ACK < SND.UNA wouldn't be accepted, instead only ACKs that are in the range ((SND.UNA - MAX.SND.WND) <= SEG.ACK <= SND.NXT) get through. This can be refined for new (and possibly spoofed) flows, by not accepting ACK for bytes that were never sent. This greatly improves TCP security at a little cost. I added a Fixes: tag to make sure this patch will reach stable trees, even if the 'blamed' patch was adhering to the RFC. tp->bytes_acked was added in linux-4.2 Following packetdrill test (courtesy of Yepeng Pan) shows the issue at hand: 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1024) = 0 // ---------------- Handshake ------------------- // // when window scale is set to 14 the window size can be extended to // 65535 * (2^14) = 1073725440. Linux would accept an ACK packet // with ack number in (Server_ISN+1-1073725440. Server_ISN+1) // ,though this ack number acknowledges some data never // sent by the server. +0 < S 0:0(0) win 65535 <mss 1400,nop,wscale 14> +0 > S. 0:0(0) ack 1 <...> +0 < . 1:1(0) ack 1 win 65535 +0 accept(3, ..., ...) = 4 // For the established connection, we send an ACK packet, // the ack packet uses ack number 1 - 1073725300 + 2^32, // where 2^32 is used to wrap around. // Note: we used 1073725300 instead of 1073725440 to avoid possible // edge cases. // 1 - 1073725300 + 2^32 = 3221241997 // Oops, old kernels happily accept this packet. +0 < . 1:1001(1000) ack 3221241997 win 65535 // After the kernel fix the following will be replaced by a challenge ACK, // and prior malicious frame would be dropped. +0 > . 1:1(0) ack 1001 | ||||
| CVE-2023-52880 | 3 Debian, Linux, Redhat | 4 Debian Linux, Linux Kernel, Enterprise Linux and 1 more | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: require CAP_NET_ADMIN to attach N_GSM0710 ldisc Any unprivileged user can attach N_GSM0710 ldisc, but it requires CAP_NET_ADMIN to create a GSM network anyway. Require initial namespace CAP_NET_ADMIN to do that. | ||||
| CVE-2023-52871 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: soc: qcom: llcc: Handle a second device without data corruption Usually there is only one llcc device. But if there were a second, even a failed probe call would modify the global drv_data pointer. So check if drv_data is valid before overwriting it. | ||||
| CVE-2023-52834 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2026-08-04 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: atl1c: Work around the DMA RX overflow issue This is based on alx driver commit 881d0327db37 ("net: alx: Work around the DMA RX overflow issue"). The alx and atl1c drivers had RX overflow error which was why a custom allocator was created to avoid certain addresses. The simpler workaround then created for alx driver, but not for atl1c due to lack of tester. Instead of using a custom allocator, check the allocated skb address and use skb_reserve() to move away from problematic 0x...fc0 address. Tested on AR8131 on Acer 4540. | ||||
| CVE-2023-52732 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ceph: blocklist the kclient when receiving corrupted snap trace When received corrupted snap trace we don't know what exactly has happened in MDS side. And we shouldn't continue IOs and metadatas access to MDS, which may corrupt or get incorrect contents. This patch will just block all the further IO/MDS requests immediately and then evict the kclient itself. The reason why we still need to evict the kclient just after blocking all the further IOs is that the MDS could revoke the caps faster. | ||||
| CVE-2023-52704 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: freezer,umh: Fix call_usermode_helper_exec() vs SIGKILL Tetsuo-San noted that commit f5d39b020809 ("freezer,sched: Rewrite core freezer logic") broke call_usermodehelper_exec() for the KILLABLE case. Specifically it was missed that the second, unconditional, wait_for_completion() was not optional and ensures the on-stack completion is unused before going out-of-scope. | ||||
| CVE-2023-52656 | 3 Debian, Linux, Redhat | 3 Debian Linux, Linux Kernel, Enterprise Linux | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: drop any code related to SCM_RIGHTS This is dead code after we dropped support for passing io_uring fds over SCM_RIGHTS, get rid of it. | ||||
| CVE-2023-52654 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/af_unix: disable sending io_uring over sockets File reference cycles have caused lots of problems for io_uring in the past, and it still doesn't work exactly right and races with unix_stream_read_generic(). The safest fix would be to completely disallow sending io_uring files via sockets via SCM_RIGHT, so there are no possible cycles invloving registered files and thus rendering SCM accounting on the io_uring side unnecessary. | ||||
| CVE-2023-52636 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: just wait for more data to be available on the socket A short read may occur while reading the message footer from the socket. Later, when the socket is ready for another read, the messenger invokes all read_partial_*() handlers, including read_partial_sparse_msg_data(). The expectation is that read_partial_sparse_msg_data() would bail, allowing the messenger to invoke read_partial() for the footer and pick up where it left off. However read_partial_sparse_msg_data() violates that and ends up calling into the state machine in the OSD client. The sparse-read state machine assumes that it's a new op and interprets some piece of the footer as the sparse-read header and returns bogus extents/data length, etc. To determine whether read_partial_sparse_msg_data() should bail, let's reuse cursor->total_resid. Because once it reaches to zero that means all the extents and data have been successfully received in last read, else it could break out when partially reading any of the extents and data. And then osd_sparse_read() could continue where it left off. [ idryomov: changelog ] | ||||
| CVE-2023-52623 | 3 Debian, Linux, Redhat | 4 Debian Linux, Linux Kernel, Enterprise Linux and 1 more | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix a suspicious RCU usage warning I received the following warning while running cthon against an ontap server running pNFS: [ 57.202521] ============================= [ 57.202522] WARNING: suspicious RCU usage [ 57.202523] 6.7.0-rc3-g2cc14f52aeb7 #41492 Not tainted [ 57.202525] ----------------------------- [ 57.202525] net/sunrpc/xprtmultipath.c:349 RCU-list traversed in non-reader section!! [ 57.202527] other info that might help us debug this: [ 57.202528] rcu_scheduler_active = 2, debug_locks = 1 [ 57.202529] no locks held by test5/3567. [ 57.202530] stack backtrace: [ 57.202532] CPU: 0 PID: 3567 Comm: test5 Not tainted 6.7.0-rc3-g2cc14f52aeb7 #41492 5b09971b4965c0aceba19f3eea324a4a806e227e [ 57.202534] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 2/2/2022 [ 57.202536] Call Trace: [ 57.202537] <TASK> [ 57.202540] dump_stack_lvl+0x77/0xb0 [ 57.202551] lockdep_rcu_suspicious+0x154/0x1a0 [ 57.202556] rpc_xprt_switch_has_addr+0x17c/0x190 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202596] rpc_clnt_setup_test_and_add_xprt+0x50/0x180 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202621] ? rpc_clnt_add_xprt+0x254/0x300 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202646] rpc_clnt_add_xprt+0x27a/0x300 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202671] ? __pfx_rpc_clnt_setup_test_and_add_xprt+0x10/0x10 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202696] nfs4_pnfs_ds_connect+0x345/0x760 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202728] ? __pfx_nfs4_test_session_trunk+0x10/0x10 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202754] nfs4_fl_prepare_ds+0x75/0xc0 [nfs_layout_nfsv41_files e3a4187f18ae8a27b630f9feae6831b584a9360a] [ 57.202760] filelayout_write_pagelist+0x4a/0x200 [nfs_layout_nfsv41_files e3a4187f18ae8a27b630f9feae6831b584a9360a] [ 57.202765] pnfs_generic_pg_writepages+0xbe/0x230 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202788] __nfs_pageio_add_request+0x3fd/0x520 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202813] nfs_pageio_add_request+0x18b/0x390 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202831] nfs_do_writepage+0x116/0x1e0 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202849] nfs_writepages_callback+0x13/0x30 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202866] write_cache_pages+0x265/0x450 [ 57.202870] ? __pfx_nfs_writepages_callback+0x10/0x10 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202891] nfs_writepages+0x141/0x230 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202913] do_writepages+0xd2/0x230 [ 57.202917] ? filemap_fdatawrite_wbc+0x5c/0x80 [ 57.202921] filemap_fdatawrite_wbc+0x67/0x80 [ 57.202924] filemap_write_and_wait_range+0xd9/0x170 [ 57.202930] nfs_wb_all+0x49/0x180 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202947] nfs4_file_flush+0x72/0xb0 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202969] __se_sys_close+0x46/0xd0 [ 57.202972] do_syscall_64+0x68/0x100 [ 57.202975] ? do_syscall_64+0x77/0x100 [ 57.202976] ? do_syscall_64+0x77/0x100 [ 57.202979] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 57.202982] RIP: 0033:0x7fe2b12e4a94 [ 57.202985] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d d5 18 0e 00 00 74 13 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 44 c3 0f 1f 00 48 83 ec 18 89 7c 24 0c e8 c3 [ 57.202987] RSP: 002b:00007ffe857ddb38 EFLAGS: 00000202 ORIG_RAX: 0000000000000003 [ 57.202989] RAX: ffffffffffffffda RBX: 00007ffe857dfd68 RCX: 00007fe2b12e4a94 [ 57.202991] RDX: 0000000000002000 RSI: 00007ffe857ddc40 RDI: 0000000000000003 [ 57.202992] RBP: 00007ffe857dfc50 R08: 7fffffffffffffff R09: 0000000065650f49 [ 57.202993] R10: 00007f ---truncated--- | ||||
| CVE-2023-52620 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: disallow timeout for anonymous sets Never used from userspace, disallow these parameters. | ||||
| CVE-2023-52616 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: lib/mpi - Fix unexpected pointer access in mpi_ec_init When the mpi_ec_ctx structure is initialized, some fields are not cleared, causing a crash when referencing the field when the structure was released. Initially, this issue was ignored because memory for mpi_ec_ctx is allocated with the __GFP_ZERO flag. For example, this error will be triggered when calculating the Za value for SM2 separately. | ||||
| CVE-2023-52588 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to tag gcing flag on page during block migration It needs to add missing gcing flag on page during block migration, in order to garantee migrated data be persisted during checkpoint, otherwise out-of-order persistency between data and node may cause data corruption after SPOR. Similar issue was fixed by commit 2d1fe8a86bf5 ("f2fs: fix to tag gcing flag on page during file defragment"). | ||||
| CVE-2023-52522 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2026-08-04 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: fix possible store tearing in neigh_periodic_work() While looking at a related syzbot report involving neigh_periodic_work(), I found that I forgot to add an annotation when deleting an RCU protected item from a list. Readers use rcu_deference(*np), we need to use either rcu_assign_pointer() or WRITE_ONCE() on writer side to prevent store tearing. I use rcu_assign_pointer() to have lockdep support, this was the choice made in neigh_flush_dev(). | ||||
| CVE-2023-52461 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/sched: Fix bounds limiting when given a malformed entity If we're given a malformed entity in drm_sched_entity_init()--shouldn't happen, but we verify--with out-of-bounds priority value, we set it to an allowed value. Fix the expression which sets this limit. | ||||
| CVE-2023-52453 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: hisi_acc_vfio_pci: Update migration data pointer correctly on saving/resume When the optional PRE_COPY support was added to speed up the device compatibility check, it failed to update the saving/resuming data pointers based on the fd offset. This results in migration data corruption and when the device gets started on the destination the following error is reported in some cases, [ 478.907684] arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received: [ 478.913691] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000310200000010 [ 478.919603] arm-smmu-v3 arm-smmu-v3.2.auto: 0x000002088000007f [ 478.925515] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000 [ 478.931425] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000 [ 478.947552] hisi_zip 0000:31:00.0: qm_axi_rresp [error status=0x1] found [ 478.955930] hisi_zip 0000:31:00.0: qm_db_timeout [error status=0x400] found [ 478.955944] hisi_zip 0000:31:00.0: qm sq doorbell timeout in function 2 | ||||
| CVE-2023-52442 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate session id and tree id in compound request `smb2_get_msg()` in smb2_get_ksmbd_tcon() and smb2_check_user_session() will always return the first request smb2 header in a compound request. if `SMB2_TREE_CONNECT_HE` is the first command in compound request, will return 0, i.e. The tree id check is skipped. This patch use ksmbd_req_buf_next() to get current command in compound. | ||||
| CVE-2023-4515 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate command request size In commit 2b9b8f3b68ed ("ksmbd: validate command payload size"), except for SMB2_OPLOCK_BREAK_HE command, the request size of other commands is not checked, it's not expected. Fix it by add check for request size of other commands. | ||||
| CVE-2023-4130 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix wrong next length validation of ea buffer in smb2_set_ea() There are multiple smb2_ea_info buffers in FILE_FULL_EA_INFORMATION request from client. ksmbd find next smb2_ea_info using ->NextEntryOffset of current smb2_ea_info. ksmbd need to validate buffer length Before accessing the next ea. ksmbd should check buffer length using buf_len, not next variable. next is the start offset of current ea that got from previous ea. | ||||
| CVE-2023-32249 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: not allow guest user on multichannel This patch return STATUS_NOT_SUPPORTED if binding session is guest. | ||||