Export limit exceeded: 372068 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 372068 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 20888 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (20888 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38671 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: qup: jump out of the loop in case of timeout Original logic only sets the return value but doesn't jump out of the loop if the bus is kept active by a client. This is not expected. A malicious or buggy i2c client can hang the kernel in this case and should be avoided. This is observed during a long time test with a PCA953x GPIO extender. Fix it by changing the logic to not only sets the return value, but also jumps out of the loop and return to the caller with -ETIMEDOUT. | ||||
| CVE-2025-38569 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: benet: fix BUG when creating VFs benet crashes as soon as SRIOV VFs are created: kernel BUG at mm/vmalloc.c:3457! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 4 UID: 0 PID: 7408 Comm: test.sh Kdump: loaded Not tainted 6.16.0+ #1 PREEMPT(voluntary) [...] RIP: 0010:vunmap+0x5f/0x70 [...] Call Trace: <TASK> __iommu_dma_free+0xe8/0x1c0 be_cmd_set_mac_list+0x3fe/0x640 [be2net] be_cmd_set_mac+0xaf/0x110 [be2net] be_vf_eth_addr_config+0x19f/0x330 [be2net] be_vf_setup+0x4f7/0x990 [be2net] be_pci_sriov_configure+0x3a1/0x470 [be2net] sriov_numvfs_store+0x20b/0x380 kernfs_fop_write_iter+0x354/0x530 vfs_write+0x9b9/0xf60 ksys_write+0xf3/0x1d0 do_syscall_64+0x8c/0x3d0 be_cmd_set_mac_list() calls dma_free_coherent() under a spin_lock_bh. Fix it by freeing only after the lock has been released. | ||||
| CVE-2025-38565 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Exit early on perf_mmap() fail When perf_mmap() fails to allocate a buffer, it still invokes the event_mapped() callback of the related event. On X86 this might increase the perf_rdpmc_allowed reference counter. But nothing undoes this as perf_mmap_close() is never called in this case, which causes another reference count leak. Return early on failure to prevent that. | ||||
| CVE-2025-38563 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Prevent VMA split of buffer mappings The perf mmap code is careful about mmap()'ing the user page with the ringbuffer and additionally the auxiliary buffer, when the event supports it. Once the first mapping is established, subsequent mapping have to use the same offset and the same size in both cases. The reference counting for the ringbuffer and the auxiliary buffer depends on this being correct. Though perf does not prevent that a related mapping is split via mmap(2), munmap(2) or mremap(2). A split of a VMA results in perf_mmap_open() calls, which take reference counts, but then the subsequent perf_mmap_close() calls are not longer fulfilling the offset and size checks. This leads to reference count leaks. As perf already has the requirement for subsequent mappings to match the initial mapping, the obvious consequence is that VMA splits, caused by resizing of a mapping or partial unmapping, have to be prevented. Implement the vm_operations_struct::may_split() callback and return unconditionally -EINVAL. That ensures that the mapping offsets and sizes cannot be changed after the fact. Remapping to a different fixed address with the same size is still possible as it takes the references for the new mapping and drops those of the old mapping. | ||||
| CVE-2025-38555 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget : fix use-after-free in composite_dev_cleanup() 1. In func configfs_composite_bind() -> composite_os_desc_req_prepare(): if kmalloc fails, the pointer cdev->os_desc_req will be freed but not set to NULL. Then it will return a failure to the upper-level function. 2. in func configfs_composite_bind() -> composite_dev_cleanup(): it will checks whether cdev->os_desc_req is NULL. If it is not NULL, it will attempt to use it.This will lead to a use-after-free issue. BUG: KASAN: use-after-free in composite_dev_cleanup+0xf4/0x2c0 Read of size 8 at addr 0000004827837a00 by task init/1 CPU: 10 PID: 1 Comm: init Tainted: G O 5.10.97-oh #1 kasan_report+0x188/0x1cc __asan_load8+0xb4/0xbc composite_dev_cleanup+0xf4/0x2c0 configfs_composite_bind+0x210/0x7ac udc_bind_to_driver+0xb4/0x1ec usb_gadget_probe_driver+0xec/0x21c gadget_dev_desc_UDC_store+0x264/0x27c | ||||
| CVE-2025-40325 | 1 Linux | 2 Kernel, Linux Kernel | 2026-01-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: wait barrier before returning discard request with REQ_NOWAIT raid10_handle_discard should wait barrier before returning a discard bio which has REQ_NOWAIT. And there is no need to print warning calltrace if a discard bio has REQ_NOWAIT flag. Quality engineer usually checks dmesg and reports error if dmesg has warning/error calltrace. | ||||
| CVE-2025-39731 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: vm_unmap_ram() may be called from an invalid context When testing F2FS with xfstests using UFS backed virtual disks the kernel complains sometimes that f2fs_release_decomp_mem() calls vm_unmap_ram() from an invalid context. Example trace from f2fs/007 test: f2fs/007 5s ... [12:59:38][ 8.902525] run fstests f2fs/007 [ 11.468026] BUG: sleeping function called from invalid context at mm/vmalloc.c:2978 [ 11.471849] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 68, name: irq/22-ufshcd [ 11.475357] preempt_count: 1, expected: 0 [ 11.476970] RCU nest depth: 0, expected: 0 [ 11.478531] CPU: 0 UID: 0 PID: 68 Comm: irq/22-ufshcd Tainted: G W 6.16.0-rc5-xfstests-ufs-g40f92e79b0aa #9 PREEMPT(none) [ 11.478535] Tainted: [W]=WARN [ 11.478536] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 11.478537] Call Trace: [ 11.478543] <TASK> [ 11.478545] dump_stack_lvl+0x4e/0x70 [ 11.478554] __might_resched.cold+0xaf/0xbe [ 11.478557] vm_unmap_ram+0x21/0xb0 [ 11.478560] f2fs_release_decomp_mem+0x59/0x80 [ 11.478563] f2fs_free_dic+0x18/0x1a0 [ 11.478565] f2fs_finish_read_bio+0xd7/0x290 [ 11.478570] blk_update_request+0xec/0x3b0 [ 11.478574] ? sbitmap_queue_clear+0x3b/0x60 [ 11.478576] scsi_end_request+0x27/0x1a0 [ 11.478582] scsi_io_completion+0x40/0x300 [ 11.478583] ufshcd_mcq_poll_cqe_lock+0xa3/0xe0 [ 11.478588] ufshcd_sl_intr+0x194/0x1f0 [ 11.478592] ufshcd_threaded_intr+0x68/0xb0 [ 11.478594] ? __pfx_irq_thread_fn+0x10/0x10 [ 11.478599] irq_thread_fn+0x20/0x60 [ 11.478602] ? __pfx_irq_thread_fn+0x10/0x10 [ 11.478603] irq_thread+0xb9/0x180 [ 11.478605] ? __pfx_irq_thread_dtor+0x10/0x10 [ 11.478607] ? __pfx_irq_thread+0x10/0x10 [ 11.478609] kthread+0x10a/0x230 [ 11.478614] ? __pfx_kthread+0x10/0x10 [ 11.478615] ret_from_fork+0x7e/0xd0 [ 11.478619] ? __pfx_kthread+0x10/0x10 [ 11.478621] ret_from_fork_asm+0x1a/0x30 [ 11.478623] </TASK> This patch modifies in_task() check inside f2fs_read_end_io() to also check if interrupts are disabled. This ensures that pages are unmapped asynchronously in an interrupt handler. | ||||
| CVE-2025-38529 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: comedi: aio_iiro_16: Fix bit shift out of bounds When checking for a supported IRQ number, the following test is used: if ((1 << it->options[1]) & 0xdcfc) { However, `it->options[i]` is an unchecked `int` value from userspace, so the shift amount could be negative or out of bounds. Fix the test by requiring `it->options[1]` to be within bounds before proceeding with the original test. Valid `it->options[1]` values that select the IRQ will be in the range [1,15]. The value 0 explicitly disables the use of interrupts. | ||||
| CVE-2025-38530 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: comedi: pcl812: Fix bit shift out of bounds When checking for a supported IRQ number, the following test is used: if ((1 << it->options[1]) & board->irq_bits) { However, `it->options[i]` is an unchecked `int` value from userspace, so the shift amount could be negative or out of bounds. Fix the test by requiring `it->options[1]` to be within bounds before proceeding with the original test. Valid `it->options[1]` values that select the IRQ will be in the range [1,15]. The value 0 explicitly disables the use of interrupts. | ||||
| CVE-2025-38535 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: phy: tegra: xusb: Fix unbalanced regulator disable in UTMI PHY mode When transitioning from USB_ROLE_DEVICE to USB_ROLE_NONE, the code assumed that the regulator should be disabled. However, if the regulator is marked as always-on, regulator_is_enabled() continues to return true, leading to an incorrect attempt to disable a regulator which is not enabled. This can result in warnings such as: [ 250.155624] WARNING: CPU: 1 PID: 7326 at drivers/regulator/core.c:3004 _regulator_disable+0xe4/0x1a0 [ 250.155652] unbalanced disables for VIN_SYS_5V0 To fix this, we move the regulator control logic into tegra186_xusb_padctl_id_override() function since it's directly related to the ID override state. The regulator is now only disabled when the role transitions from USB_ROLE_HOST to USB_ROLE_NONE, by checking the VBUS_ID register. This ensures that regulator enable/disable operations are properly balanced and only occur when actually transitioning to/from host mode. | ||||
| CVE-2025-38587 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible infinite loop in fib6_info_uses_dev() fib6_info_uses_dev() seems to rely on RCU without an explicit protection. Like the prior fix in rt6_nlmsg_size(), we need to make sure fib6_del_route() or fib6_add_rt2node() have not removed the anchor from the list, or we risk an infinite loop. | ||||
| CVE-2025-38588 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent infinite loop in rt6_nlmsg_size() While testing prior patch, I was able to trigger an infinite loop in rt6_nlmsg_size() in the following place: list_for_each_entry_rcu(sibling, &f6i->fib6_siblings, fib6_siblings) { rt6_nh_nlmsg_size(sibling->fib6_nh, &nexthop_len); } This is because fib6_del_route() and fib6_add_rt2node() uses list_del_rcu(), which can confuse rcu readers, because they might no longer see the head of the list. Restart the loop if f6i->fib6_nsiblings is zero. | ||||
| CVE-2025-38538 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: nbpfaxi: Fix memory corruption in probe() The nbpf->chan[] array is allocated earlier in the nbpf_probe() function and it has "num_channels" elements. These three loops iterate one element farther than they should and corrupt memory. The changes to the second loop are more involved. In this case, we're copying data from the irqbuf[] array into the nbpf->chan[] array. If the data in irqbuf[i] is the error IRQ then we skip it, so the iterators are not in sync. I added a check to ensure that we don't go beyond the end of the irqbuf[] array. I'm pretty sure this can't happen, but it seemed harmless to add a check. On the other hand, after the loop has ended there is a check to ensure that the "chan" iterator is where we expect it to be. In the original code we went one element beyond the end of the array so the iterator wasn't in the correct place and it would always return -EINVAL. However, now it will always be in the correct place. I deleted the check since we know the result. | ||||
| CVE-2025-38602 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iwlwifi: Add missing check for alloc_ordered_workqueue Add check for the return value of alloc_ordered_workqueue since it may return NULL pointer. | ||||
| CVE-2025-38543 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/tegra: nvdec: Fix dma_alloc_coherent error check Check for NULL return value with dma_alloc_coherent, in line with Robin's fix for vic.c in 'drm/tegra: vic: Fix DMA API misuse'. | ||||
| CVE-2025-38546 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: atm: clip: Fix memory leak of struct clip_vcc. ioctl(ATMARP_MKIP) allocates struct clip_vcc and set it to vcc->user_back. The code assumes that vcc_destroy_socket() passes NULL skb to vcc->push() when the socket is close()d, and then clip_push() frees clip_vcc. However, ioctl(ATMARPD_CTRL) sets NULL to vcc->push() in atm_init_atmarp(), resulting in memory leak. Let's serialise two ioctl() by lock_sock() and check vcc->push() in atm_init_atmarp() to prevent memleak. | ||||
| CVE-2025-38548 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Validate the size of the received input buffer Add buffer_recv_size to store the size of the received bytes. Validate buffer_recv_size in send_usb_cmd(). | ||||
| CVE-2025-38609 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PM / devfreq: Check governor before using governor->name Commit 96ffcdf239de ("PM / devfreq: Remove redundant governor_name from struct devfreq") removes governor_name and uses governor->name to replace it. But devfreq->governor may be NULL and directly using devfreq->governor->name may cause null pointer exception. Move the check of governor to before using governor->name. | ||||
| CVE-2025-38610 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powercap: dtpm_cpu: Fix NULL pointer dereference in get_pd_power_uw() The get_pd_power_uw() function can crash with a NULL pointer dereference when em_cpu_get() returns NULL. This occurs when a CPU becomes impossible during runtime, causing get_cpu_device() to return NULL, which propagates through em_cpu_get() and leads to a crash when em_span_cpus() dereferences the NULL pointer. Add a NULL check after em_cpu_get() and return 0 if unavailable, matching the existing fallback behavior in __dtpm_cpu_setup(). [ rjw: Drop an excess empty code line ] | ||||
| CVE-2025-38612 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: fbtft: fix potential memory leak in fbtft_framebuffer_alloc() In the error paths after fb_info structure is successfully allocated, the memory allocated in fb_deferred_io_init() for info->pagerefs is not freed. Fix that by adding the cleanup function on the error path. | ||||