Export limit exceeded: 36330 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36330 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-49147 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: Fix the maximum minor value is blk_alloc_ext_minor() ida_alloc_range(..., min, max, ...) returns values from min to max, inclusive. So, NR_EXT_DEVT is a valid idx returned by blk_alloc_ext_minor(). This is an issue because in device_add_disk(), this value is used in: ddev->devt = MKDEV(disk->major, disk->first_minor); and NR_EXT_DEVT is '(1 << MINORBITS)'. So, should 'disk->first_minor' be NR_EXT_DEVT, it would overflow. | ||||
| CVE-2022-49146 | 1 Linux | 1 Linux Kernel | 2025-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virtio: use virtio_device_ready() in virtio_device_restore() After waking up a suspended VM, the kernel prints the following trace for virtio drivers which do not directly call virtio_device_ready() in the .restore: PM: suspend exit irq 22: nobody cared (try booting with the "irqpoll" option) Call Trace: <IRQ> dump_stack_lvl+0x38/0x49 dump_stack+0x10/0x12 __report_bad_irq+0x3a/0xaf note_interrupt.cold+0xb/0x60 handle_irq_event+0x71/0x80 handle_fasteoi_irq+0x95/0x1e0 __common_interrupt+0x6b/0x110 common_interrupt+0x63/0xe0 asm_common_interrupt+0x1e/0x40 ? __do_softirq+0x75/0x2f3 irq_exit_rcu+0x93/0xe0 sysvec_apic_timer_interrupt+0xac/0xd0 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch_cpu_idle+0x12/0x20 default_idle_call+0x39/0xf0 do_idle+0x1b5/0x210 cpu_startup_entry+0x20/0x30 start_secondary+0xf3/0x100 secondary_startup_64_no_verify+0xc3/0xcb </TASK> handlers: [<000000008f9bac49>] vp_interrupt [<000000008f9bac49>] vp_interrupt Disabling IRQ #22 This happens because we don't invoke .enable_cbs callback in virtio_device_restore(). That callback is used by some transports (e.g. virtio-pci) to enable interrupts. Let's fix it, by calling virtio_device_ready() as we do in virtio_dev_probe(). This function calls .enable_cts callback and sets DRIVER_OK status bit. This fix also avoids setting DRIVER_OK twice for those drivers that call virtio_device_ready() in the .restore. | ||||
| CVE-2022-49133 | 1 Linux | 1 Linux Kernel | 2025-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: svm range restore work deadlock when process exit kfd_process_notifier_release flush svm_range_restore_work which calls svm_range_list_lock_and_flush_work to flush deferred_list work, but if deferred_list work mmput release the last user, it will call exit_mmap -> notifier_release, it is deadlock with below backtrace. Move flush svm_range_restore_work to kfd_process_wq_release to avoid deadlock. Then svm_range_restore_work take task->mm ref to avoid mm is gone while validating and mapping ranges to GPU. Workqueue: events svm_range_deferred_list_work [amdgpu] Call Trace: wait_for_completion+0x94/0x100 __flush_work+0x12a/0x1e0 __cancel_work_timer+0x10e/0x190 cancel_delayed_work_sync+0x13/0x20 kfd_process_notifier_release+0x98/0x2a0 [amdgpu] __mmu_notifier_release+0x74/0x1f0 exit_mmap+0x170/0x200 mmput+0x5d/0x130 svm_range_deferred_list_work+0x104/0x230 [amdgpu] process_one_work+0x220/0x3c0 | ||||
| CVE-2022-49118 | 1 Linux | 1 Linux Kernel | 2025-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Free irq vectors in order for v3 HW If the driver probe fails to request the channel IRQ or fatal IRQ, the driver will free the IRQ vectors before freeing the IRQs in free_irq(), and this will cause a kernel BUG like this: ------------[ cut here ]------------ kernel BUG at drivers/pci/msi.c:369! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Call trace: free_msi_irqs+0x118/0x13c pci_disable_msi+0xfc/0x120 pci_free_irq_vectors+0x24/0x3c hisi_sas_v3_probe+0x360/0x9d0 [hisi_sas_v3_hw] local_pci_probe+0x44/0xb0 work_for_cpu_fn+0x20/0x34 process_one_work+0x1d0/0x340 worker_thread+0x2e0/0x460 kthread+0x180/0x190 ret_from_fork+0x10/0x20 ---[ end trace b88990335b610c11 ]--- So we use devm_add_action() to control the order in which we free the vectors. | ||||
| CVE-2024-55641 | 1 Linux | 1 Linux Kernel | 2025-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: unlock inodes when erroring out of xfs_trans_alloc_dir Debugging a filesystem patch with generic/475 caused the system to hang after observing the following sequences in dmesg: XFS (dm-0): metadata I/O error in "xfs_imap_to_bp+0x61/0xe0 [xfs]" at daddr 0x491520 len 32 error 5 XFS (dm-0): metadata I/O error in "xfs_btree_read_buf_block+0xba/0x160 [xfs]" at daddr 0x3445608 len 8 error 5 XFS (dm-0): metadata I/O error in "xfs_imap_to_bp+0x61/0xe0 [xfs]" at daddr 0x138e1c0 len 32 error 5 XFS (dm-0): log I/O error -5 XFS (dm-0): Metadata I/O Error (0x1) detected at xfs_trans_read_buf_map+0x1ea/0x4b0 [xfs] (fs/xfs/xfs_trans_buf.c:311). Shutting down filesystem. XFS (dm-0): Please unmount the filesystem and rectify the problem(s) XFS (dm-0): Internal error dqp->q_ino.reserved < dqp->q_ino.count at line 869 of file fs/xfs/xfs_trans_dquot.c. Caller xfs_trans_dqresv+0x236/0x440 [xfs] XFS (dm-0): Corruption detected. Unmount and run xfs_repair XFS (dm-0): Unmounting Filesystem be6bcbcc-9921-4deb-8d16-7cc94e335fa7 The system is stuck in unmount trying to lock a couple of inodes so that they can be purged. The dquot corruption notice above is a clue to what happened -- a link() call tried to set up a transaction to link a child into a directory. Quota reservation for the transaction failed after IO errors shut down the filesystem, but then we forgot to unlock the inodes on our way out. Fix that. | ||||
| CVE-2024-56713 | 1 Linux | 1 Linux Kernel | 2025-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: netdevsim: fix nsim_pp_hold_write() nsim_pp_hold_write() has two problems: 1) It may return with rtnl held, as found by syzbot. 2) Its return value does not propagate an error if any. | ||||
| CVE-2024-56714 | 1 Linux | 1 Linux Kernel | 2025-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ionic: no double destroy workqueue There are some FW error handling paths that can cause us to try to destroy the workqueue more than once, so let's be sure we're checking for that. The case where this popped up was in an AER event where the handlers got called in such a way that ionic_reset_prepare() and thus ionic_dev_teardown() got called twice in a row. The second time through the workqueue was already destroyed, and destroy_workqueue() choked on the bad wq pointer. We didn't hit this in AER handler testing before because at that time we weren't using a private workqueue. Later we replaced the use of the system workqueue with our own private workqueue but hadn't rerun the AER handler testing since then. | ||||
| CVE-2025-21691 | 1 Linux | 1 Linux Kernel | 2025-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cachestat: fix page cache statistics permission checking When the 'cachestat()' system call was added in commit cf264e1329fb ("cachestat: implement cachestat syscall"), it was meant to be a much more convenient (and performant) version of mincore() that didn't need mapping things into the user virtual address space in order to work. But it ended up missing the "check for writability or ownership" fix for mincore(), done in commit 134fca9063ad ("mm/mincore.c: make mincore() more conservative"). This just adds equivalent logic to 'cachestat()', modified for the file context (rather than vma). | ||||
| CVE-2024-57935 | 1 Linux | 1 Linux Kernel | 2025-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix accessing invalid dip_ctx during destroying QP If it fails to modify QP to RTR, dip_ctx will not be attached. And during detroying QP, the invalid dip_ctx pointer will be accessed. | ||||
| CVE-2024-57941 | 1 Linux | 1 Linux Kernel | 2025-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix the (non-)cancellation of copy when cache is temporarily disabled When the caching for a cookie is temporarily disabled (e.g. due to a DIO write on that file), future copying to the cache for that file is disabled until all fds open on that file are closed. However, if netfslib is using the deprecated PG_private_2 method (such as is currently used by ceph), and decides it wants to copy to the cache, netfs_advance_write() will just bail at the first check seeing that the cache stream is unavailable, and indicate that it dealt with all the content. This means that we have no subrequests to provide notifications to drive the state machine or even to pin the request and the request just gets discarded, leaving the folios with PG_private_2 set. Fix this by jumping directly to cancel the request if the cache is not available. That way, we don't remove mark3 from the folio_queue list and netfs_pgpriv2_cancel() will clean up the folios. This was found by running the generic/013 xfstest against ceph with an active cache and the "-o fsc" option passed to ceph. That would usually hang | ||||
| CVE-2024-57942 | 1 Linux | 1 Linux Kernel | 2025-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix ceph copy to cache on write-begin At the end of netfs_unlock_read_folio() in which folios are marked appropriately for copying to the cache (either with by being marked dirty and having their private data set or by having PG_private_2 set) and then unlocked, the folio_queue struct has the entry pointing to the folio cleared. This presents a problem for netfs_pgpriv2_write_to_the_cache(), which is used to write folios marked with PG_private_2 to the cache as it expects to be able to trawl the folio_queue list thereafter to find the relevant folios, leading to a hang. Fix this by not clearing the folio_queue entry if we're going to do the deprecated copy-to-cache. The clearance will be done instead as the folios are written to the cache. This can be reproduced by starting cachefiles, mounting a ceph filesystem with "-o fsc" and writing to it. | ||||
| CVE-2025-21657 | 1 Linux | 1 Linux Kernel | 2025-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Replace rq_lock() to raw_spin_rq_lock() in scx_ops_bypass() scx_ops_bypass() iterates all CPUs to re-enqueue all the scx tasks. For each CPU, it acquires a lock using rq_lock() regardless of whether a CPU is offline or the CPU is currently running a task in a higher scheduler class (e.g., deadline). The rq_lock() is supposed to be used for online CPUs, and the use of rq_lock() may trigger an unnecessary warning in rq_pin_lock(). Therefore, replace rq_lock() to raw_spin_rq_lock() in scx_ops_bypass(). Without this change, we observe the following warning: ===== START ===== [ 6.615205] rq->balance_callback && rq->balance_callback != &balance_push_callback [ 6.615208] WARNING: CPU: 2 PID: 0 at kernel/sched/sched.h:1730 __schedule+0x1130/0x1c90 ===== END ===== | ||||
| CVE-2025-21679 | 1 Linux | 1 Linux Kernel | 2025-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: add the missing error handling inside get_canonical_dev_path Inside function get_canonical_dev_path(), we call d_path() to get the final device path. But d_path() can return error, and in that case the next strscpy() call will trigger an invalid memory access. Add back the missing error handling for d_path(). | ||||
| CVE-2025-1451 | 1 Lollms | 1 Lollms Web Ui | 2025-10-15 | 7.5 High |
| A vulnerability in parisneo/lollms-webui v13 arises from the server's handling of multipart boundaries in file uploads. The server does not limit or validate the length of the boundary or the characters appended to it, allowing an attacker to craft requests with excessively long boundaries, leading to resource exhaustion and eventual denial of service (DoS). Despite an attempted patch in commit 483431bb, which blocked hyphen characters from being appended to the multipart boundary, the fix is insufficient. The server remains vulnerable if other characters (e.g., '4', 'a') are used instead of hyphens. This allows attackers to exploit the vulnerability using different characters, causing resource exhaustion and service unavailability. | ||||
| CVE-2025-0453 | 1 Lfprojects | 1 Mlflow | 2025-10-15 | 7.5 High |
| In mlflow/mlflow version 2.17.2, the `/graphql` endpoint is vulnerable to a denial of service attack. An attacker can create large batches of queries that repeatedly request all runs from a given experiment. This can tie up all the workers allocated by MLFlow, rendering the application unable to respond to other requests. This vulnerability is due to uncontrolled resource consumption. | ||||
| CVE-2025-0189 | 1 Aimstack | 1 Aim | 2025-10-15 | 7.5 High |
| In version 3.25.0 of aimhubio/aim, the tracking server is vulnerable to a denial of service attack. The server overrides the maximum size for websocket messages, allowing very large images to be tracked. This causes the server to become unresponsive to other requests while processing the large image, leading to a denial of service condition. | ||||
| CVE-2024-9098 | 1 Lunary | 1 Lunary | 2025-10-15 | 6.1 Medium |
| In lunary-ai/lunary before version 1.4.30, a privilege escalation vulnerability exists where admins can invite new members with billing permissions, thereby gaining unauthorized access to billing resources. This issue arises because the user creation endpoint does not restrict admins from inviting users with billing roles. As a result, admins can circumvent the intended access control, posing a risk to the organization's financial resources. | ||||
| CVE-2024-9096 | 1 Lunary | 1 Lunary | 2025-10-15 | 7.1 High |
| In lunary-ai/lunary version 1.4.28, the /checklists/:id route allows low-privilege users to modify checklists by sending a PATCH request. The route lacks proper access control, such as middleware to ensure that only authorized users (e.g., project owners or admins) can modify checklist data. This vulnerability allows any user associated with the project, regardless of their role, to modify checklists, including changing the slug or data fields, which can lead to tampering with essential project workflows, altering business logic, and introducing errors that undermine integrity. | ||||
| CVE-2024-9095 | 1 Lunary | 1 Lunary | 2025-10-15 | 9.8 Critical |
| In lunary-ai/lunary version v1.4.28, the /bigquery API route lacks proper access control, allowing any logged-in user to create a Datastream to Google BigQuery and export the entire database. This includes sensitive data such as password hashes and secret API keys. The route is protected by a config check (`config.DATA_WAREHOUSE_EXPORTS_ALLOWED`), but it does not verify the user's access level or implement any access control middleware. This vulnerability can lead to the extraction of sensitive data, disruption of services, credential compromise, and service integrity breaches. | ||||
| CVE-2024-9000 | 1 Lunary | 1 Lunary | 2025-10-15 | 6.5 Medium |
| In lunary-ai/lunary before version 1.4.26, the checklists.post() endpoint allows users to create or modify checklists without validating whether the user has proper permissions. This missing access control permits unauthorized users to create checklists, bypassing intended permission checks. Additionally, the endpoint does not validate the uniqueness of the slug field when creating a new checklist, allowing an attacker to spoof existing checklists by reusing the slug of an already-existing checklist. This can lead to significant data integrity issues, as legitimate checklists can be replaced with malicious or altered data. | ||||