Export limit exceeded: 22407 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22407 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40222 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: sh-sci: fix RSCI FIFO overrun handling The receive error handling code is shared between RSCI and all other SCIF port types, but the RSCI overrun_reg is specified as a memory offset, while for other SCIF types it is an enum value used to index into the sci_port_params->regs array, as mentioned above the sci_serial_in() function. For RSCI, the overrun_reg is CSR (0x48), causing the sci_getreg() call inside the sci_handle_fifo_overrun() function to index outside the bounds of the regs array, which currently has a size of 20, as specified by SCI_NR_REGS. Because of this, we end up accessing memory outside of RSCI's rsci_port_params structure, which, when interpreted as a plat_sci_reg, happens to have a non-zero size, causing the following WARN when sci_serial_in() is called, as the accidental size does not match the supported register sizes. The existence of the overrun_reg needs to be checked because SCIx_SH3_SCIF_REGTYPE has overrun_reg set to SCLSR, but SCLSR is not present in the regs array. Avoid calling sci_getreg() for port types which don't use standard register handling. Use the ops->read_reg() and ops->write_reg() functions to properly read and write registers for RSCI, and change the type of the status variable to accommodate the 32-bit CSR register. sci_getreg() and sci_serial_in() are also called with overrun_reg in the sci_mpxed_interrupt() interrupt handler, but that code path is not used for RSCI, as it does not have a muxed interrupt. ------------[ cut here ]------------ Invalid register access WARNING: CPU: 0 PID: 0 at drivers/tty/serial/sh-sci.c:522 sci_serial_in+0x38/0xac Modules linked in: renesas_usbhs at24 rzt2h_adc industrialio_adc sha256 cfg80211 bluetooth ecdh_generic ecc rfkill fuse drm backlight ipv6 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.17.0-rc1+ #30 PREEMPT Hardware name: Renesas RZ/T2H EVK Board based on r9a09g077m44 (DT) pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : sci_serial_in+0x38/0xac lr : sci_serial_in+0x38/0xac sp : ffff800080003e80 x29: ffff800080003e80 x28: ffff800082195b80 x27: 000000000000000d x26: ffff8000821956d0 x25: 0000000000000000 x24: ffff800082195b80 x23: ffff000180e0d800 x22: 0000000000000010 x21: 0000000000000000 x20: 0000000000000010 x19: ffff000180e72000 x18: 000000000000000a x17: ffff8002bcee7000 x16: ffff800080000000 x15: 0720072007200720 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0000000000000058 x10: 0000000000000018 x9 : ffff8000821a6a48 x8 : 0000000000057fa8 x7 : 0000000000000406 x6 : ffff8000821fea48 x5 : ffff00033ef88408 x4 : ffff8002bcee7000 x3 : ffff800082195b80 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff800082195b80 Call trace: sci_serial_in+0x38/0xac (P) sci_handle_fifo_overrun.isra.0+0x70/0x134 sci_er_interrupt+0x50/0x39c __handle_irq_event_percpu+0x48/0x140 handle_irq_event+0x44/0xb0 handle_fasteoi_irq+0xf4/0x1a0 handle_irq_desc+0x34/0x58 generic_handle_domain_irq+0x1c/0x28 gic_handle_irq+0x4c/0x140 call_on_irq_stack+0x30/0x48 do_interrupt_handler+0x80/0x84 el1_interrupt+0x34/0x68 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x6c/0x70 default_idle_call+0x28/0x58 (P) do_idle+0x1f8/0x250 cpu_startup_entry+0x34/0x3c rest_init+0xd8/0xe0 console_on_rootfs+0x0/0x6c __primary_switched+0x88/0x90 ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2025-40066 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Check phy before init msta_link in mt7996_mac_sta_add_links() In order to avoid a possible NULL pointer dereference in mt7996_mac_sta_init_link routine, move the phy pointer check before running mt7996_mac_sta_init_link() in mt7996_mac_sta_add_links routine. | ||||
| CVE-2022-50649 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: adp5061: fix out-of-bounds read in adp5061_get_chg_type() ADP5061_CHG_STATUS_1_CHG_STATUS is masked with 0x07, which means a length of 8, but adp5061_chg_type array size is 4, may end up reading 4 elements beyond the end of the adp5061_chg_type[] array. | ||||
| CVE-2022-50651 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: eeprom: fix null-deref on genl_info in dump The similar fix as commit 46cdedf2a0fa ("ethtool: pse-pd: fix null-deref on genl_info in dump") is also needed for ethtool eeprom. | ||||
| CVE-2022-50653 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: atmel-mci: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, it will lead two issues: 1. The memory that allocated in mmc_alloc_host() is leaked. 2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del(). So fix this by checking the return value and calling mmc_free_host() in the error path. | ||||
| CVE-2022-50627 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix monitor mode bringup crash When the interface is brought up in monitor mode, it leads to NULL pointer dereference crash. This crash happens when the packet type is extracted for a SKB. This extraction which is present in the received msdu delivery path,is not needed for the monitor ring packets since they are all RAW packets. Hence appending the flags with "RX_FLAG_ONLY_MONITOR" to skip that extraction. Observed calltrace: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000064 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048517000 [0000000000000064] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: ath11k_pci ath11k qmi_helpers CPU: 2 PID: 1781 Comm: napi/-271 Not tainted 6.1.0-rc5-wt-ath-656295-gef907406320c-dirty #6 Hardware name: Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C2 (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ath11k_hw_qcn9074_rx_desc_get_decap_type+0x34/0x60 [ath11k] lr : ath11k_hw_qcn9074_rx_desc_get_decap_type+0x5c/0x60 [ath11k] sp : ffff80000ef5bb10 x29: ffff80000ef5bb10 x28: 0000000000000000 x27: ffff000007baafa0 x26: ffff000014a91ed0 x25: 0000000000000000 x24: 0000000000000000 x23: ffff800002b77378 x22: ffff000014a91ec0 x21: ffff000006c8d600 x20: 0000000000000000 x19: ffff800002b77740 x18: 0000000000000006 x17: 736564203634343a x16: 656e694c20657079 x15: 0000000000000143 x14: 00000000ffffffea x13: ffff80000ef5b8b8 x12: ffff80000ef5b8c8 x11: ffff80000a591d30 x10: ffff80000a579d40 x9 : c0000000ffffefff x8 : 0000000000000003 x7 : 0000000000017fe8 x6 : ffff80000a579ce8 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 3a35ec12ed7f8900 x1 : 0000000000000000 x0 : 0000000000000052 Call trace: ath11k_hw_qcn9074_rx_desc_get_decap_type+0x34/0x60 [ath11k] ath11k_dp_rx_deliver_msdu.isra.42+0xa4/0x3d0 [ath11k] ath11k_dp_rx_mon_deliver.isra.43+0x2f8/0x458 [ath11k] ath11k_dp_rx_process_mon_rings+0x310/0x4c0 [ath11k] ath11k_dp_service_srng+0x234/0x338 [ath11k] ath11k_pcic_ext_grp_napi_poll+0x30/0xb8 [ath11k] __napi_poll+0x5c/0x190 napi_threaded_poll+0xf0/0x118 kthread+0xf4/0x110 ret_from_fork+0x10/0x20 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2025-68757 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vgem-fence: Fix potential deadlock on release A timer that expires a vgem fence automatically in 10 seconds is now released with timer_delete_sync() from fence->ops.release() called on last dma_fence_put(). In some scenarios, it can run in IRQ context, which is not safe unless TIMER_IRQSAFE is used. One potentially risky scenario was demonstrated in Intel DRM CI trybot, BAT run on machine bat-adlp-6, while working on new IGT subtests syncobj_timeline@stress-* as user space replacements of some problematic test cases of a dma-fence-chain selftest [1]. [117.004338] ================================ [117.004340] WARNING: inconsistent lock state [117.004342] 6.17.0-rc7-CI_DRM_17270-g7644974e648c+ #1 Tainted: G S U [117.004346] -------------------------------- [117.004347] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [117.004349] swapper/0/0 [HC1[1]:SC1[1]:HE0:SE0] takes: [117.004352] ffff888138f86aa8 ((&fence->timer)){?.-.}-{0:0}, at: __timer_delete_sync+0x4b/0x190 [117.004361] {HARDIRQ-ON-W} state was registered at: [117.004363] lock_acquire+0xc4/0x2e0 [117.004366] call_timer_fn+0x80/0x2a0 [117.004368] __run_timers+0x231/0x310 [117.004370] run_timer_softirq+0x76/0xe0 [117.004372] handle_softirqs+0xd4/0x4d0 [117.004375] __irq_exit_rcu+0x13f/0x160 [117.004377] irq_exit_rcu+0xe/0x20 [117.004379] sysvec_apic_timer_interrupt+0xa0/0xc0 [117.004382] asm_sysvec_apic_timer_interrupt+0x1b/0x20 [117.004385] cpuidle_enter_state+0x12b/0x8a0 [117.004388] cpuidle_enter+0x2e/0x50 [117.004393] call_cpuidle+0x22/0x60 [117.004395] do_idle+0x1fd/0x260 [117.004398] cpu_startup_entry+0x29/0x30 [117.004401] start_secondary+0x12d/0x160 [117.004404] common_startup_64+0x13e/0x141 [117.004407] irq event stamp: 2282669 [117.004409] hardirqs last enabled at (2282668): [<ffffffff8289db71>] _raw_spin_unlock_irqrestore+0x51/0x80 [117.004414] hardirqs last disabled at (2282669): [<ffffffff82882021>] sysvec_irq_work+0x11/0xc0 [117.004419] softirqs last enabled at (2254702): [<ffffffff8289fd00>] __do_softirq+0x10/0x18 [117.004423] softirqs last disabled at (2254725): [<ffffffff813d4ddf>] __irq_exit_rcu+0x13f/0x160 [117.004426] other info that might help us debug this: [117.004429] Possible unsafe locking scenario: [117.004432] CPU0 [117.004433] ---- [117.004434] lock((&fence->timer)); [117.004436] <Interrupt> [117.004438] lock((&fence->timer)); [117.004440] *** DEADLOCK *** [117.004443] 1 lock held by swapper/0/0: [117.004445] #0: ffffc90000003d50 ((&fence->timer)){?.-.}-{0:0}, at: call_timer_fn+0x7a/0x2a0 [117.004450] stack backtrace: [117.004453] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G S U 6.17.0-rc7-CI_DRM_17270-g7644974e648c+ #1 PREEMPT(voluntary) [117.004455] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER [117.004455] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023 [117.004456] Call Trace: [117.004456] <IRQ> [117.004457] dump_stack_lvl+0x91/0xf0 [117.004460] dump_stack+0x10/0x20 [117.004461] print_usage_bug.part.0+0x260/0x360 [117.004463] mark_lock+0x76e/0x9c0 [117.004465] ? register_lock_class+0x48/0x4a0 [117.004467] __lock_acquire+0xbc3/0x2860 [117.004469] lock_acquire+0xc4/0x2e0 [117.004470] ? __timer_delete_sync+0x4b/0x190 [117.004472] ? __timer_delete_sync+0x4b/0x190 [117.004473] __timer_delete_sync+0x68/0x190 [117.004474] ? __timer_delete_sync+0x4b/0x190 [117.004475] timer_delete_sync+0x10/0x20 [117.004476] vgem_fence_release+0x19/0x30 [vgem] [117.004478] dma_fence_release+0xc1/0x3b0 [117.004480] ? dma_fence_release+0xa1/0x3b0 [117.004481] dma_fence_chain_release+0xe7/0x130 [117.004483] dma_fence_release+0xc1/0x3b0 [117.004484] ? _raw_spin_unlock_irqrestore+0x27/0x80 [117.004485] dma_fence_chain_irq_work+0x59/0x80 [117.004487] irq_work_single+0x75/0xa0 [117.004490] irq_work_r ---truncated--- | ||||
| CVE-2023-53788 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/ca0132: fixup buffer overrun at tuning_ctl_set() tuning_ctl_set() might have buffer overrun at (X) if it didn't break from loop by matching (A). static int tuning_ctl_set(...) { for (i = 0; i < TUNING_CTLS_COUNT; i++) (A) if (nid == ca0132_tuning_ctls[i].nid) break; snd_hda_power_up(...); (X) dspio_set_param(..., ca0132_tuning_ctls[i].mid, ...); snd_hda_power_down(...); ^ return 1; } We will get below error by cppcheck sound/pci/hda/patch_ca0132.c:4229:2: note: After for loop, i has value 12 for (i = 0; i < TUNING_CTLS_COUNT; i++) ^ sound/pci/hda/patch_ca0132.c:4234:43: note: Array index out of bounds dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, ^ This patch cares non match case. | ||||
| CVE-2025-24486 | 2 Intel, Linux | 2 Ethernet 700 Series Software, Linux Kernel | 2026-04-15 | 7.8 High |
| Improper input validation in the Linux kernel-mode driver for some Intel(R) 700 Series Ethernet before version 2.28.5 may allow an authenticated user to potentially enable escalation of privilege via local access. | ||||
| CVE-2025-24303 | 2 Intel, Linux | 2 Ethernet 800 Series Software, Linux Kernel | 2026-04-15 | 7.8 High |
| Improper check for unusual or exceptional conditions in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. | ||||
| CVE-2025-40329 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/sched: Fix deadlock in drm_sched_entity_kill_jobs_cb The Mesa issue referenced below pointed out a possible deadlock: [ 1231.611031] Possible interrupt unsafe locking scenario: [ 1231.611033] CPU0 CPU1 [ 1231.611034] ---- ---- [ 1231.611035] lock(&xa->xa_lock#17); [ 1231.611038] local_irq_disable(); [ 1231.611039] lock(&fence->lock); [ 1231.611041] lock(&xa->xa_lock#17); [ 1231.611044] <Interrupt> [ 1231.611045] lock(&fence->lock); [ 1231.611047] *** DEADLOCK *** In this example, CPU0 would be any function accessing job->dependencies through the xa_* functions that don't disable interrupts (eg: drm_sched_job_add_dependency(), drm_sched_entity_kill_jobs_cb()). CPU1 is executing drm_sched_entity_kill_jobs_cb() as a fence signalling callback so in an interrupt context. It will deadlock when trying to grab the xa_lock which is already held by CPU0. Replacing all xa_* usage by their xa_*_irq counterparts would fix this issue, but Christian pointed out another issue: dma_fence_signal takes fence.lock and so does dma_fence_add_callback. dma_fence_signal() // locks f1.lock -> drm_sched_entity_kill_jobs_cb() -> foreach dependencies -> dma_fence_add_callback() // locks f2.lock This will deadlock if f1 and f2 share the same spinlock. To fix both issues, the code iterating on dependencies and re-arming them is moved out to drm_sched_entity_kill_jobs_work(). [phasta: commit message nits] | ||||
| CVE-2025-40330 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Shutdown FW DMA in bnxt_shutdown() The netif_close() call in bnxt_shutdown() only stops packet DMA. There may be FW DMA for trace logging (recently added) that will continue. If we kexec to a new kernel, the DMA will corrupt memory in the new kernel. Add bnxt_hwrm_func_drv_unrgtr() to unregister the driver from the FW. This will stop the FW DMA. In case the call fails, call pcie_flr() to reset the function and stop the DMA. | ||||
| CVE-2025-40332 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix mmap write lock not release If mmap write lock is taken while draining retry fault, mmap write lock is not released because svm_range_restore_pages calls mmap_read_unlock then returns. This causes deadlock and system hangs later because mmap read or write lock cannot be taken. Downgrade mmap write lock to read lock if draining retry fault fix this bug. | ||||
| CVE-2025-40015 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: stm32-csi: Fix dereference before NULL check In 'stm32_csi_start', 'csidev->s_subdev' is dereferenced directly while assigning a value to the 'src_pad'. However the same value is being checked against NULL at a later point of time indicating that there are chances that the value can be NULL. Move the dereference after the NULL check. | ||||
| CVE-2022-50582 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: regulator: core: Prevent integer underflow By using a ratio of delay to poll_enabled_time that is not integer time_remaining underflows and does not exit the loop as expected. As delay could be derived from DT and poll_enabled_time is defined in the driver this can easily happen. Use a signed iterator to make sure that the loop exits once the remaining time is negative. | ||||
| CVE-2025-40050 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Skip scalar adjustment for BPF_NEG if dst is a pointer In check_alu_op(), the verifier currently calls check_reg_arg() and adjust_scalar_min_max_vals() unconditionally for BPF_NEG operations. However, if the destination register holds a pointer, these scalar adjustments are unnecessary and potentially incorrect. This patch adds a check to skip the adjustment logic when the destination register contains a pointer. | ||||
| CVE-2022-50811 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix missing unmap if z_erofs_get_extent_compressedlen() fails Otherwise, meta buffers could be leaked. | ||||
| CVE-2022-50862 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: prevent decl_tag from being referenced in func_proto Syzkaller was able to hit the following issue: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 3609 at kernel/bpf/btf.c:1946 btf_type_id_size+0x2d5/0x9d0 kernel/bpf/btf.c:1946 Modules linked in: CPU: 0 PID: 3609 Comm: syz-executor361 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 RIP: 0010:btf_type_id_size+0x2d5/0x9d0 kernel/bpf/btf.c:1946 Code: ef e8 7f 8e e4 ff 41 83 ff 0b 77 28 f6 44 24 10 18 75 3f e8 6d 91 e4 ff 44 89 fe bf 0e 00 00 00 e8 20 8e e4 ff e8 5b 91 e4 ff <0f> 0b 45 31 f6 e9 98 02 00 00 41 83 ff 12 74 18 e8 46 91 e4 ff 44 RSP: 0018:ffffc90003cefb40 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: ffff8880259c0000 RSI: ffffffff81968415 RDI: 0000000000000005 RBP: ffff88801270ca00 R08: 0000000000000005 R09: 000000000000000e R10: 0000000000000011 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000011 R14: ffff888026ee6424 R15: 0000000000000011 FS: 000055555641b300(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000f2e258 CR3: 000000007110e000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> btf_func_proto_check kernel/bpf/btf.c:4447 [inline] btf_check_all_types kernel/bpf/btf.c:4723 [inline] btf_parse_type_sec kernel/bpf/btf.c:4752 [inline] btf_parse kernel/bpf/btf.c:5026 [inline] btf_new_fd+0x1926/0x1e70 kernel/bpf/btf.c:6892 bpf_btf_load kernel/bpf/syscall.c:4324 [inline] __sys_bpf+0xb7d/0x4cf0 kernel/bpf/syscall.c:5010 __do_sys_bpf kernel/bpf/syscall.c:5069 [inline] __se_sys_bpf kernel/bpf/syscall.c:5067 [inline] __x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:5067 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f0fbae41c69 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc8aeb6228 EFLAGS: 00000246 ORIG_RAX: 0000000000000141 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0fbae41c69 RDX: 0000000000000020 RSI: 0000000020000140 RDI: 0000000000000012 RBP: 00007f0fbae05e10 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000ffffffff R11: 0000000000000246 R12: 00007f0fbae05ea0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Looks like it tries to create a func_proto which return type is decl_tag. For the details, see Martin's spot on analysis in [0]. 0: https://lore.kernel.org/bpf/CAKH8qBuQDLva_hHxxBuZzyAcYNO4ejhovz6TQeVSk8HY-2SO6g@mail.gmail.com/T/#mea6524b3fcd6298347432226e81b1e6155efc62c | ||||
| CVE-2023-53837 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: fix NULL-deref on snapshot tear down In case of early initialisation errors and on platforms that do not use the DPU controller, the deinitilisation code can be called with the kms pointer set to NULL. Patchwork: https://patchwork.freedesktop.org/patch/525099/ | ||||
| CVE-2022-50818 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix running_req for internal abort commands Disabling the remote phy for a SATA disk causes a hang: root@(none)$ more /sys/class/sas_phy/phy-0:0:8/target_port_protocols sata root@(none)$ echo 0 > sys/class/sas_phy/phy-0:0:8/enable root@(none)$ [ 67.855950] sas: ex 500e004aaaaaaa1f phy08 change count has changed [ 67.920585] sd 0:0:2:0: [sdc] Synchronizing SCSI cache [ 67.925780] sd 0:0:2:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK [ 67.935094] sd 0:0:2:0: [sdc] Stopping disk [ 67.939305] sd 0:0:2:0: [sdc] Start/Stop Unit failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK ... [ 123.998998] INFO: task kworker/u192:1:642 blocked for more than 30 seconds. [ 124.005960] Not tainted 6.0.0-rc1-205202-gf26f8f761e83 #218 [ 124.012049] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 124.019872] task:kworker/u192:1 state:D stack:0 pid: 642 ppid: 2 flags:0x00000008 [ 124.028223] Workqueue: 0000:04:00.0_event_q sas_port_event_worker [ 124.034319] Call trace: [ 124.036758] __switch_to+0x128/0x278 [ 124.040333] __schedule+0x434/0xa58 [ 124.043820] schedule+0x94/0x138 [ 124.047045] schedule_timeout+0x2fc/0x368 [ 124.051052] wait_for_completion+0xdc/0x200 [ 124.055234] __flush_workqueue+0x1a8/0x708 [ 124.059328] sas_porte_broadcast_rcvd+0xa8/0xc0 [ 124.063858] sas_port_event_worker+0x60/0x98 [ 124.068126] process_one_work+0x3f8/0x660 [ 124.072134] worker_thread+0x70/0x700 [ 124.075793] kthread+0x1a4/0x1b8 [ 124.079014] ret_from_fork+0x10/0x20 The issue is that the per-device running_req read in pm8001_dev_gone_notify() never goes to zero and we never make progress. This is caused by missing accounting for running_req for when an internal abort command completes. In commit 2cbbf489778e ("scsi: pm8001: Use libsas internal abort support") we started to send internal abort commands as a proper sas_task. In this when we deliver a sas_task to HW the per-device running_req is incremented in pm8001_queue_command(). However it is never decremented for internal abort commnds, so decrement in pm8001_mpi_task_abort_resp(). | ||||