Export limit exceeded: 390746 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 390746 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (390746 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89603 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: entry: Fix seccomp bypass after ptrace with TSYNC Sashiko review pointed out the following issue. If a thread is stopped in syscall_trace_enter() for ptrace, another thread can install a seccomp filter with SECCOMP_FILTER_FLAG_TSYNC (e.g., via seccomp_attach_filter()). This will successfully set SYSCALL_WORK_SECCOMP on the stopped thread, but syscall_trace_enter() evaluates a cached 'work' variable sampled on entry. Consequently, the subsequent check for SYSCALL_WORK_SECCOMP misses the newly assigned flag, and the filter is silently bypassed. This race condition could allow an unprivileged process to execute a prohibited system call (e.g., execve) that the newly installed filter was intended to block, especially since the tracer might have modified the system call number during the ptrace stop. Fix this by re-reading the syscall_work flags after ptrace handling, so that any new SYSCALL_WORK_SECCOMP flag set by another thread via TSYNC during the ptrace stop is observed before the subsequent seccomp check. | ||||
| CVE-2026-89607 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ecryptfs: reject oversized encrypted_key_size in parse_tag_3_packet parse_tag_3_packet() set encrypted_key_size from the Tag 3 packet body without bounding it against ECRYPTFS_MAX_KEY_BYTES (64). When encrypted_key_size > 64, decrypt_passphrase_encrypted_session_key() sets decrypted_key_size = encrypted_key_size and performs two out-of-bounds writes: 1. crypto_skcipher_decrypt() writes encrypted_key_size bytes into decrypted_key[64] via scatterlist, overflowing into the parent ecryptfs_auth_tok struct. 2. memcpy(crypt_stat->key, decrypted_key, decrypted_key_size) writes into crypt_stat->key[64], corrupting root_iv, keysig_list, and mutexes in ecryptfs_crypt_stat. Only AES-192 (cipher code 0x08) enables this because it sets crypt_stat->key_size = 24 independently of encrypted_key_size, allowing crypto_skcipher_setkey() to succeed while encrypted_key_size exceeds ECRYPTFS_MAX_KEY_BYTES. The PKI decryption path (parse_tag_65_packet) already validates decrypted_key_size <= ECRYPTFS_MAX_KEY_BYTES; the passphrase path omits this check. Bound encrypted_key_size against ECRYPTFS_MAX_KEY_BYTES (64) rather than ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES (512). The 64-byte limit also protects the 512-byte encrypted_key[] buffer, so the former 512-byte check is removed as redundant. [tyhicks: Adjust the code comment to refer to macros representing the buffer sizes rather than mentioning the buffer size values since they may change in the future] | ||||
| CVE-2026-89656 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: libceph: reject buckets with mismatched CRUSH ids crush_decode() stores bucket data by array slot, and the mapper later derives the per-bucket workspace index from the decoded bucket id. A malformed map can therefore make one bucket reuse another bucket's workspace by encoding an id different from -1 - slot. For uniform buckets, the second replica selection expands the source bucket's permutation into that aliased workspace buffer. If the source bucket is larger than the aliased bucket, the write runs past the smaller permutation array and can escape the kvmalloc'd CRUSH workspace. KASAN reports a slab OOB write of 4 bytes in bucket_perm_choose(). Reject buckets whose encoded id does not match their array slot. Valid CRUSH maps already use the canonical negative id corresponding to the bucket slot, so this restores the invariant expected by work->work[-1 - in->id] without changing valid map behavior. | ||||
| CVE-2026-89666 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 6.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: reject out-of-range nseconds in NFSv3 SETATTR and create ops A client can send an NFSv3 SETATTR, CREATE, MKDIR, SYMLINK or MKNOD carrying an atime or mtime whose nseconds field is out of range. The value is well-formed on the wire and decodes cleanly into a valid uint32, but it is not a valid timespec64: tv_nsec must be less than NSEC_PER_SEC. Nothing in the setattr path clamps it. notify_change() runs the time through timestamp_truncate(), which does not reduce tv_nsec below NSEC_PER_SEC when the filesystem supports nanosecond granularity (s_time_gran == 1), and the inode atime/mtime setters store it verbatim (only ctime is normalized, via inode_set_ctime_to_ts()). The un-normalized value then corrupts on-disk metadata: ext4's ext4_encode_extra_time() shifts tv_nsec left by EXT4_EPOCH_BITS, which overflows the 32-bit extra field and clobbers the seconds-epoch bits, so the stored seconds (and thus the year) are wrong on read-back. XFS with bigtime mis-stores the timestamp for the same reason. Validate the client-supplied atime/mtime in the proc handlers and return NFS3ERR_INVAL before anything is changed. RFC 1813 lists NFS3ERR_INVAL for SETATTR and describes it as the error for a value the server 'can not store ... in its own representation'; the client maps it to EINVAL. Checking in the proc handlers, rather than in nfsd_setattr(), keeps the rejection in front of object creation. The create operations create the object before nfsd_create_setattr() runs, so a late failure would leave the new object behind and turn a non-idempotent request into a namespace change that reports failure. The check is therefore done up front, for the create operations before the object is created. tv_nsec is a long, so the comparison casts it to unsigned long (the same width) rather than to u32, matching timespec64_valid(). A u32 cast would truncate on 64-bit; the unsigned long cast also rejects a value that became negative when an out-of-range u32 wire nseconds was assigned to a 32-bit long. Only client-supplied times are checked: SET_TO_SERVER_TIME requests carry no client value. The sattrguard3 ctime is deliberately left alone: an out-of-range guard simply never matches the object's ctime and yields NFS3ERR_NOT_SYNC via the existing guardtime comparison, which is the protocol-correct outcome rather than rejecting the request. | ||||
| CVE-2026-89549 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: route to a populated pool in svc_pool_for_cpu() svc_set_num_threads() spreads the requested threads evenly across the service's pools (base = nrservs / sv_nrpools). When a service runs fewer threads than it has pools -- e.g. an nfsd configured with fewer threads than the host has NUMA nodes while running in "pernode" or "percpu" mode -- the trailing pools are left with no threads at all. svc_xprt_enqueue() selects a pool from the CPU servicing the transport, queues the transport on that pool's sp_xprts, and only wakes a thread from the same pool. Each thread services exclusively its own pool, so a transport that lands on a threadless pool is enqueued on sp_xprts and never picked up: the connection hangs indefinitely. Have svc_pool_for_cpu() skip pools that currently have no threads, falling back to the next populated pool. This trades NUMA locality for a guarantee that the work is actually serviced. sp_nrthreads is only updated under the service mutex; the lockless read here is a best-effort routing hint, so annotate it with data_race(). | ||||
| CVE-2026-89570 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cxl/mce: Make the MCE notifier per-region Flavien Solt reported lifetime issues with the CXL MCE notifier, which can lead to NULL dereferences and use-after-free in the MCE handler. The notifier was registered per memory device and stored in 'struct cxl_memdev_state', even though it only needs the region state (the region's SPA range and its extended linear cache size). Instead of keeping the memory device and endpoint alive, the correct fix is to move the notifier into 'struct cxl_region' and register it from cxl_region_probe() as it should be a per-region notifier. Setup the registration to only happen for regions that have an extended linear cache as that is the only current usage. Remove cxl_port_get_spa_cache_alias() as it is now dead code. [ dj: Update dev_warn() when notifier fails due to kconfig. (Ben) ] | ||||
| CVE-2026-89589 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: acpi/apei/ghes: Use raw_spinlock_t for CXL CPER work locks The CXL CPER work registration and unregistration helpers acquire cxl_cper_work_lock and cxl_cper_prot_err_work_lock with a spinlock guard(), which leaves local interrupts enabled. The corresponding post paths (cxl_cper_post_event(), cxl_cper_post_prot_err()) execute in hard IRQ context (they are called from the GHES error notification path) and acquire the same locks with an irqsave guard(). If a CPU is holding one of these locks via a spinlock guard() when a GHES interrupt arrives on the same CPU, the IRQ handler spins on the held lock waiting for it to release, while the lock holder is preempted by the IRQ. The result is a deadlock. Convert both locks from spinlock_t to raw_spinlock_t and use guard() at all call sites. On PREEMPT_RT kernels spinlock_t is backed by rt_mutex and sleeping from hard IRQ context is not permitted; raw_spinlock_t is safe in both contexts. Add WARN_ONCE to both register functions to surface double-registration bugs at runtime. Restructure both unregister functions to clear the global work pointer under the lock before calling cancel_work_sync(), closing the window where a CPER interrupt could schedule work on a pointer about to be freed. Add kfifo_reset() after cancel_work_sync() so stale entries are not replayed on next module load. Both kfifos are single-consumer: only one work_struct is registered at a time, enforced by the WARN_ONCE guard in the register functions. kfifo_reset() is safe outside the lock because cancel_work_sync() has already quiesced the consumer, and no new consumer can register until the current module exit completes and a fresh module init runs. Remove the redundant cancel_work_sync() call from cxl_ras_exit() and cxl_pci_driver_exit(). The CPER unregister functions now quiesce the work internally. | ||||
| CVE-2026-89664 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: release OPEN-decoded posix ACLs via op_release nfsd4_decode_createhow4() calls nfsd4_decode_fattr4(), which allocates refcounted struct posix_acl objects via posix_acl_alloc() and stores them in open->op_pacl and open->op_dpacl. These pointers must be released once the OPEN compound finishes. When nfsd4_decode_open_claim4() returns a non-seqid-mutating error, the dispatcher short-circuits before op_func runs: nfsd4_proc_compound() if (op->status && op->opnum == OP_OPEN) op->status = nfsd4_open_omfg(...) if (!seqid_mutating_err(ntohl(op->status))) return op->status; /* nfsd4_open() never runs */ ... opdesc->op_release(&op->u) /* must still release op_pacl/op_dpacl */ Before this change OP_OPEN had no .op_release in nfsd4_ops[], and the release pair lived inside nfsd4_open() at its out_err: label. On the short-circuit path nfsd4_open() is never invoked, so both posix_acl refs leak on every malformed OPEN compound that carries valid POSIX ACL createhow4 attributes. Add nfsd4_open_release() and wire it as .op_release for OP_OPEN. posix_acl_release() is NULL-safe, so the single release site covers both the normal path and the nfsd4_open_omfg short-circuit. Remove the matching posix_acl_release() pair from nfsd4_open()'s out_err: label to avoid double-releasing. The compound loop has two encoding branches: nfsd4_encode_operation() for normal ops, and nfsd4_encode_replay() for v4.0 replayed ops. op_release was only called from nfsd4_encode_operation(), so resources attached to op->u leak on the replay path. Move the op_release() call out of nfsd4_encode_operation() and the replay branch, placing it after the if-else in nfsd4_proc_compound(). This gives a single call site in a fairly obviously-correct place, covering both the normal encoding and replay paths. | ||||
| CVE-2026-89668 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: move nfsd_debugfs_init() after nfsd4_init_slabs() in init_nfsd() nfsd_debugfs_init() runs before nfsd4_init_slabs() in init_nfsd(). If the slab allocation fails, the bare "return retval" bypasses nfsd_debugfs_exit(), leaving orphan debugfs files with stale fops pointers into the freed module text. Move nfsd_debugfs_init() to after the slab init succeeds, so the early return has no debugfs state to clean up. Since debugfs is now the more recently initialized of the two, also update the unwind paths to match reverse-initialization (LIFO) order: run nfsd_debugfs_exit() before nfsd4_free_slabs() in both the init_nfsd() error path and exit_nfsd(). The nfsd debugfs files only reference module-global state and have no dependency on the slab caches, so that reordering is a cleanup with no functional change. | ||||
| CVE-2026-89674 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix XDR length calculation in nfsd4_ff_encode_layoutget The XDR buffer size calculation in nfsd4_ff_encode_layoutget() has multiple errors that can result in either an out-of-bounds write or leaking uninitialized kernel memory to the client: - fh_len doesn't account for XDR padding on the file handle data - uid and gid lengths use "8 + len" but xdr_encode_opaque() actually writes "4 + xdr_align_size(len)" bytes - ds_len omits the flags and stats_collect_hint fields (8 bytes), while len's header constant overestimates by 8 bytes -- these partially cancel but leave a net mismatch The worst case occurs with short strings (e.g. uid=0, gid=0 with an odd-sized file handle), where the function writes up to 5 bytes past the reserved XDR buffer. Conversely, when string lengths happen to be 4-byte aligned, the reservation is too large and stale buffer content is sent to the client. Fix this by breaking out every encoded field explicitly in the ds_len calculation, using xdr_align_size() for all variable-length opaque fields, and correcting the header constants. | ||||
| CVE-2026-89707 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: release path refs on follow_down() error nfsd_cross_mnt() initializes a local struct path with mntget() and dget() before calling follow_down(). On a negative return the error arm jumps to out without releasing those references: err = follow_down(&path, follow_flags); if (err < 0) goto out; follow_down() never drops the caller's entry-time refs on any error sub-case; for example a pre-cross d_manage() failure leaves path untouched, so the mntget()/dget() taken on entry survive the call. Every other early-exit arm in nfsd_cross_mnt() (other-namespace return, IS_ERR(exp2), and the success tail after the swap) already calls path_put(&path); the err < 0 arm is the lone omission. The leak inflates mnt_count and d_count on each failed cross-mount, blocking umount and pinning dentries against the shrinker, and is reachable by any authenticated NFS client through nfsd_lookup_dentry or the NFSv4 READDIR encode path. Fix by calling path_put(&path) before the goto out in the err < 0 arm so the entry-time refs are released on all follow_down() error returns. | ||||
| CVE-2026-89745 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: debugfs: Fix lockdown check for mmap_prepare Commit 651fdda8406d ("relay: update relay to use mmap_prepare") changed the `mmap` file operation to `mmap_prepare` for relayfs, but the lockdown check in debugfs was not updated accordingly. This prevents debugfs from being locked down when the kernel is in integrity mode if a file uses `mmap_prepare` but not `mmap`. Since the conversion to `mmap_prepare` across the kernel is not yet complete, update the lockdown check to look for both `mmap` and `mmap_prepare` to ensure comprehensive coverage. | ||||
| CVE-2026-89759 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/kmemleak: avoid soft lockup when scanning task stacks Patch series "mm/kmemleak: avoid soft lockup when scanning task", v3. kmemleak_scan() scans every task stack under one rcu_read_lock() with no reschedule point, which can trip the soft lockup watchdog on hosts with very many threads. That prints the following message, depending on the workload+host configuration: watchdog: BUG: soft lockup - CPU#35 stuck for 22s! [kmemleak:537] scan_block kmemleak_scan kmemleak_scan_thread kthread Patch 1 walks the tasks with find_ge_pid() so the scan reschedules between tasks Patches 2-3 let the scan loops stop early once a scan is interrupted. This patch (of 3): kmemleak_scan() walks every thread and scans its kernel stack under a single rcu_read_lock() with no reschedule point. On a host with very many threads -- amplified by KASAN/lockdep in debug builds -- this loop can hog a CPU long enough to trip the soft lockup watchdog: watchdog: BUG: soft lockup - CPU#35 stuck for 22s! [kmemleak:537] scan_block kmemleak_scan kmemleak_scan_thread kthread A cond_resched() cannot be added directly: the loop runs inside an RCU read-side critical section. Walk the tasks one PID at a time with find_ge_pid(), taking the RCU read lock only to look up and pin each task. The stack is then scanned with no lock held, so cond_resched() runs between tasks and the scan stops early on scan_should_stop(). This follows the next_tgid()/task_seq_get_next() iteration pattern and keeps each RCU critical section short. | ||||
| CVE-2026-89764 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rust: devres: fix race between concurrent revokers There is a potential race condition when two paths try to revoke a Devres concurrently. The driver core's devres_release_all() calls Revocable::revoke() via the release callback, while Devres::drop() calls revoke_nosync() on another CPU. The revoker that does not claim the is_available swap returns immediately, but the revoker that did may still be executing drop_in_place() on the inner data. This can cause a use-after-free when the other revoker's caller proceeds to drop adjacent resources that drop_in_place() still references (e.g., Devres<DmaMappedSgt> racing with SGTable freeing the backing sg_table and pages). Fix this by adding a Completion. The release callback signals the Completion after revoke() finishes, and Devres::drop() waits for it when it loses the is_available swap. This ensures the wrapped object is fully torn down before Devres::drop() returns. | ||||
| CVE-2026-89514 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: fnic: Use GFP_ATOMIC for VLAN alloc under spinlock fnic_fcoe_process_vlan_resp() allocates a VLAN descriptor with kzalloc_obj() (default GFP_KERNEL) while holding vlans_lock via spin_lock_irqsave(). GFP_KERNEL may sleep, which is not allowed in this atomic context and can trigger a sleeping-from-invalid-context warning or deadlock. Pass GFP_ATOMIC so the allocation is safe under the IRQ-safe spinlock. | ||||
| CVE-2026-89535 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reorder rpcrdma_rn_unregister before rdma_destroy_id svc_rdma_free() caches rdma->sc_cm_id->device before teardown, then calls rdma_destroy_id(sc_cm_id) which frees the cm_id. rpcrdma_rn_unregister() follows, but between those two calls the transport's sc_rn entry is still installed in the device's rd_xa. A concurrent ib_unregister_device walk can dispatch svc_rdma_xprt_done() against the now-freed sc_cm_id. Move rpcrdma_rn_unregister() before rdma_destroy_id() so the transport's notification entry is removed from the xarray before the cm_id it references is destroyed. Also guard the sc_cm_id dereference with a NULL check: the following patches introduce paths that reach svc_rdma_free() with sc_cm_id == NULL (listener create failure, ADDR_CHANGE replacement failure). | ||||
| CVE-2026-89640 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix loff_t underflow in cifs_remap_file_range() when len == 0 With len == 0 (clone to EOF), the effective length is computed as: len = src_inode->i_size - off; If off > i_size, this is a negative loff_t, corrupting the ByteCount in the FSCTL_DUPLICATE_EXTENTS_TO_FILE request and inverting the range in filemap_write_and_wait_range(). The existing off >= i_size check fires only after the ioctl has already been sent. Snapshot i_size_read() once for both the bounds check and the length calculation, eliminating the TOCTOU and 32-bit torn-read risk. Reject off > src_size with -EINVAL. Treat off == src_size as a no-op, consistent with __generic_remap_file_range_prep(). | ||||
| CVE-2026-89646 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix leaked inode reference on writeback abort at umount ceph_dirty_folio() takes a wrbuffer claim on each newly dirtied folio: it bumps i_wrbuffer_ref (taking an ihold() on the 0->1 transition) and attaches the snap_context to folio->private. That claim is released only by ceph_put_wrbuffer_cap_refs(), which for a submitted write runs from writepages_finish(). In ceph_submit_write(), if ceph_inc_osd_stopping_blocker() fails -- which happens during umount -- the request is aborted before submission: the already-collected folios are only redirtied and unlocked, so writepages_finish() never runs and the claim is leaked. redirty_page_for_writepage() -> folio_redirty_for_writepage() -> filemap_dirty_folio() sets PG_dirty directly and does not go through ->dirty_folio, so ceph_dirty_folio() is not re-entered to rebalance it. Because every subsequent writeback also fails the osd_stopping_blocker, i_wrbuffer_ref never returns to 0, the ihold() is never dropped, and the inode cannot be evicted: VFS: Busy inodes after unmount of ceph kernel BUG at fs/super.c:650! Release the orphaned claim in the abort path before redirtying, via ceph_undo_wrbuffer_claim(): detach the snap_context, drop the wrbuffer reference (letting i_wrbuffer_ref reach 0 and iput() the inode), and drop the snap_context reference -- i.e. do what writepages_finish() would have done for these never-submitted folios. Only the locked_pages entries are undone; folios still in the fbatch were never dirty-cleared by this call (folio_clear_dirty_for_io() is the ownership-transfer point, and a successful move NULLs the fbatch slot), so they hold no claim this call owns. | ||||
| CVE-2026-87918 | 2026-09-12 | 5.3 Medium | ||
| The WPBot WordPress plugin before 8.5.7 does not perform any authorization or nonce check on several AJAX actions that relay prompts to its configured AI providers, allowing unauthenticated attackers to make those third-party API calls, and consume the associated cost, using the site's own configured API keys. | ||||
| CVE-2026-87888 | 2026-09-12 | 8 High | ||
| The YayPricing WordPress plugin before 3.5.7 does not perform an authorization check on a REST route that saves its pricing rules, allowing users with the subscriber role and above to store JavaScript that executes in the browser of an administrator who opens the YayPricing WordPress plugin before 3.5.7's settings page. | ||||