Export limit exceeded: 19269 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (19269 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43344 | 1 Linux | 1 Linux Kernel | 2026-05-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix die ID init and look up bugs In snbep_pci2phy_map_init(), in the nr_node_ids > 8 path, uncore_device_to_die() may return -1 when all CPUs associated with the UBOX device are offline. Remove the WARN_ON_ONCE(die_id == -1) check for two reasons: - The current code breaks out of the loop. This is incorrect because pci_get_device() does not guarantee iteration in domain or bus order, so additional UBOX devices may be skipped during the scan. - Returning -EINVAL is incorrect, since marking offline buses with die_id == -1 is expected and should not be treated as an error. Separately, when NUMA is disabled on a NUMA-capable platform, pcibus_to_node() returns NUMA_NO_NODE, causing uncore_device_to_die() to return -1 for all PCI devices. As a result, spr_update_device_location(), used on Intel SPR and EMR, ignores the corresponding PMON units and does not add them to the RB tree. Fix this by using uncore_pcibus_to_dieid(), which retrieves topology from the UBOX GIDNIDMAP register and works regardless of whether NUMA is enabled in Linux. This requires snbep_pci2phy_map_init() to be added in spr_uncore_pci_init(). Keep uncore_device_to_die() only for the nr_node_ids > 8 case, where NUMA is expected to be enabled. | ||||
| CVE-2026-43330 | 1 Linux | 1 Linux Kernel | 2026-05-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: caam - fix overflow on long hmac keys When a key longer than block size is supplied, it is copied and then hashed into the real key. The memory allocated for the copy needs to be rounded to DMA cache alignment, as otherwise the hashed key may corrupt neighbouring memory. The copying is performed using kmemdup, however this leads to an overflow: reading more bytes (aligned_len - keylen) from the keylen source buffer. Fix this by replacing kmemdup with kmalloc, followed by memcpy. | ||||
| CVE-2026-31635 | 1 Linux | 1 Linux Kernel | 2026-05-18 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: fix oversized RESPONSE authenticator length check rxgk_verify_response() decodes auth_len from the packet and is supposed to verify that it fits in the remaining bytes. The existing check is inverted, so oversized RESPONSE authenticators are accepted and passed to rxgk_decrypt_skb(), which can later reach skb_to_sgvec() with an impossible length and hit BUG_ON(len). Decoded from the original latest-net reproduction logs with scripts/decode_stacktrace.sh: RIP: __skb_to_sgvec() [net/core/skbuff.c:5285 (discriminator 1)] Call Trace: skb_to_sgvec() [net/core/skbuff.c:5305] rxgk_decrypt_skb() [net/rxrpc/rxgk_common.h:81] rxgk_verify_response() [net/rxrpc/rxgk.c:1268] rxrpc_process_connection() [net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364 net/rxrpc/conn_event.c:386] process_one_work() [kernel/workqueue.c:3281] worker_thread() [kernel/workqueue.c:3353 kernel/workqueue.c:3440] kthread() [kernel/kthread.c:436] ret_from_fork() [arch/x86/kernel/process.c:164] Reject authenticator lengths that exceed the remaining packet payload. | ||||
| CVE-2026-43329 | 1 Linux | 1 Linux Kernel | 2026-05-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: strictly check for maximum number of actions The maximum number of flowtable hardware offload actions in IPv6 is: * ethernet mangling (4 payload actions, 2 for each ethernet address) * SNAT (4 payload actions) * DNAT (4 payload actions) * Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing) for QinQ. * Redirect (1 action) Which makes 17, while the maximum is 16. But act_ct supports for tunnels actions too. Note that payload action operates at 32-bit word level, so mangling an IPv6 address takes 4 payload actions. Update flow_action_entry_next() calls to check for the maximum number of supported actions. While at it, rise the maximum number of actions per flow from 16 to 24 so this works fine with IPv6 setups. | ||||
| CVE-2026-43332 | 1 Linux | 1 Linux Kernel | 2026-05-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix thermal zone device registration error path If thermal_zone_device_register_with_trips() fails after registering a thermal zone device, it needs to wait for the tz->removal completion like thermal_zone_device_unregister(), in case user space has managed to take a reference to the thermal zone device's kobject, in which case thermal_release() may not be called by the error path itself and tz may be freed prematurely. Add the missing wait_for_completion() call to the thermal zone device registration error path. | ||||
| CVE-2026-43342 | 1 Linux | 1 Linux Kernel | 2026-05-18 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_rndis: Protect RNDIS options with mutex The class/subclass/protocol options are suspectible to race conditions as they can be accessed concurrently through configfs. Use existing mutex to protect these options. This issue was identified during code inspection. | ||||
| CVE-2026-43343 | 1 Linux | 1 Linux Kernel | 2026-05-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_subset: Fix unbalanced refcnt in geth_free geth_alloc() increments the reference count, but geth_free() fails to decrement it. This prevents the configuration of attributes via configfs after unlinking the function. Decrement the reference count in geth_free() to ensure proper cleanup. | ||||
| CVE-2026-43500 | 1 Linux | 1 Linux Kernel | 2026-05-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Also unshare DATA/RESPONSE packets when paged frags are present The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE handler in rxrpc_verify_response() copy the skb to a linear one before calling into the security ops only when skb_cloned() is true. An skb that is not cloned but still carries externally-owned paged fragments (e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via __ip_append_data, or a chained skb_has_frag_list()) falls through to the in-place decryption path, which binds the frag pages directly into the AEAD/skcipher SGL via skb_to_sgvec(). Extend the gate to also unshare when skb_has_frag_list() or skb_has_shared_frag() is true. This catches the splice-loopback vector and other externally-shared frag sources while preserving the zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC page_pool RX, GRO). The OOM/trace handling already in place is reused. | ||||
| CVE-2026-43220 | 1 Linux | 1 Linux Kernel | 2026-05-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: serialize sequence allocation under concurrent TLB invalidations With concurrent TLB invalidations, completion wait randomly gets timed out because cmd_sem_val was incremented outside the IOMMU spinlock, allowing CMD_COMPL_WAIT commands to be queued out of sequence and breaking the ordering assumption in wait_on_sem(). Move the cmd_sem_val increment under iommu->lock so completion sequence allocation is serialized with command queuing. And remove the unnecessary return. | ||||
| CVE-2026-43109 | 1 Linux | 1 Linux Kernel | 2026-05-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86: shadow stacks: proper error handling for mmap lock 김영민 reports that shstk_pop_sigframe() doesn't check for errors from mmap_read_lock_killable(), which is a silly oversight, and also shows that we haven't marked those functions with "__must_check", which would have immediately caught it. So let's fix both issues. | ||||
| CVE-2026-31718 | 1 Linux | 1 Linux Kernel | 2026-05-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in __ksmbd_close_fd() via durable scavenger When a durable file handle survives session disconnect (TCP close without SMB2_LOGOFF), session_fd_check() sets fp->conn = NULL to preserve the handle for later reconnection. However, it did not clean up the byte-range locks on fp->lock_list. Later, when the durable scavenger thread times out and calls __ksmbd_close_fd(NULL, fp), the lock cleanup loop did: spin_lock(&fp->conn->llist_lock); This caused a slab use-after-free because fp->conn was NULL and the original connection object had already been freed by ksmbd_tcp_disconnect(). The root cause is asymmetric cleanup: lock entries (smb_lock->clist) were left dangling on the freed conn->lock_list while fp->conn was nulled out. To fix this issue properly, we need to handle the lifetime of smb_lock->clist across three paths: - Safely skip clist deletion when list is empty and fp->conn is NULL. - Remove the lock from the old connection's lock_list in session_fd_check() - Re-add the lock to the new connection's lock_list in ksmbd_reopen_durable_fd(). | ||||
| CVE-2026-31715 | 1 Linux | 1 Linux Kernel | 2026-05-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix UAF caused by decrementing sbi->nr_pages[] in f2fs_write_end_io() The xfstests case "generic/107" and syzbot have both reported a NULL pointer dereference. The concurrent scenario that triggers the panic is as follows: F2FS_WB_CP_DATA write callback umount - f2fs_write_checkpoint - f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA) - blk_mq_end_request - bio_endio - f2fs_write_end_io : dec_page_count(sbi, F2FS_WB_CP_DATA) : wake_up(&sbi->cp_wait) - kill_f2fs_super - kill_block_super - f2fs_put_super : iput(sbi->node_inode) : sbi->node_inode = NULL : f2fs_in_warm_node_list - is_node_folio // sbi->node_inode is NULL and panic The root cause is that f2fs_put_super() calls iput(sbi->node_inode) and sets sbi->node_inode to NULL after sbi->nr_pages[F2FS_WB_CP_DATA] is decremented to zero. As a result, f2fs_in_warm_node_list() may dereference a NULL node_inode when checking whether a folio belongs to the node inode, leading to a panic. This patch fixes the issue by calling f2fs_in_warm_node_list() before decrementing sbi->nr_pages[F2FS_WB_CP_DATA], thus preventing the use-after-free condition. | ||||
| CVE-2026-31712 | 1 Linux | 1 Linux Kernel | 2026-05-17 | 8.3 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: require minimum ACE size in smb_check_perm_dacl() Both ACE-walk loops in smb_check_perm_dacl() only guard against an under-sized remaining buffer, not against an ACE whose declared `ace->size` is smaller than the struct it claims to describe: if (offsetof(struct smb_ace, access_req) > aces_size) break; ace_size = le16_to_cpu(ace->size); if (ace_size > aces_size) break; The first check only requires the 4-byte ACE header to be in bounds; it does not require access_req (4 bytes at offset 4) to be readable. An attacker who has set a crafted DACL on a file they own can declare ace->size == 4 with aces_size == 4, pass both checks, and then granted |= le32_to_cpu(ace->access_req); /* upper loop */ compare_sids(&sid, &ace->sid); /* lower loop */ reads access_req at offset 4 (OOB by up to 4 bytes) and ace->sid at offset 8 (OOB by up to CIFS_SID_BASE_SIZE + SID_MAX_SUB_AUTHORITIES * 4 bytes). Tighten both loops to require ace_size >= offsetof(struct smb_ace, sid) + CIFS_SID_BASE_SIZE which is the smallest valid on-wire ACE layout (4-byte header + 4-byte access_req + 8-byte sid base with zero sub-auths). Also reject ACEs whose sid.num_subauth exceeds SID_MAX_SUB_AUTHORITIES before letting compare_sids() dereference sub_auth[] entries. parse_sec_desc() already enforces an equivalent check (lines 441-448); smb_check_perm_dacl() simply grew weaker validation over time. Reachability: authenticated SMB client with permission to set an ACL on a file. On a subsequent CREATE against that file, the kernel walks the stored DACL via smb_check_perm_dacl() and triggers the OOB read. Not pre-auth, and the OOB read is not reflected to the attacker, but KASAN reports and kernel state corruption are possible. | ||||
| CVE-2026-31709 | 1 Linux | 1 Linux Kernel | 2026-05-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: validate the whole DACL before rewriting it in cifsacl build_sec_desc() and id_mode_to_cifs_acl() derive a DACL pointer from a server-supplied dacloffset and then use the incoming ACL to rebuild the chmod/chown security descriptor. The original fix only checked that the struct smb_acl header fits before reading dacl_ptr->size or dacl_ptr->num_aces. That avoids the immediate header-field OOB read, but the rewrite helpers still walk ACEs based on pdacl->num_aces with no structural validation of the incoming DACL body. A malicious server can return a truncated DACL that still contains a header, claims one or more ACEs, and then drive replace_sids_and_copy_aces() or set_chmod_dacl() past the validated extent while they compare or copy attacker-controlled ACEs. Factor the DACL structural checks into validate_dacl(), extend them to validate each ACE against the DACL bounds, and use the shared validator before the chmod/chown rebuild paths. parse_dacl() reuses the same validator so the read-side parser and write-side rewrite paths agree on what constitutes a well-formed incoming DACL. | ||||
| CVE-2026-31511 | 1 Linux | 1 Linux Kernel | 2026-05-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix dangling pointer on mgmt_add_adv_patterns_monitor_complete This fixes the condition checking so mgmt_pending_valid is executed whenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd) would kfree(cmd) without unlinking it from the list first, leaving a dangling pointer. Any subsequent list traversal (e.g., mgmt_pending_foreach during __mgmt_power_off, or another mgmt_pending_valid call) would dereference freed memory. | ||||
| CVE-2026-31440 | 1 Linux | 1 Linux Kernel | 2026-05-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix leaking event log memory During the device remove process, the device is reset, causing the configuration registers to go back to their default state, which is zero. As the driver is checking if the event log support was enabled before deallocating, it will fail if a reset happened before. Do not check if the support was enabled, the check for 'idxd->evl' being valid (only allocated if the HW capability is available) is enough. | ||||
| CVE-2026-23171 | 1 Linux | 1 Linux Kernel | 2026-05-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bonding: fix use-after-free due to enslave fail after slave array update Fix a use-after-free which happens due to enslave failure after the new slave has been added to the array. Since the new slave can be used for Tx immediately, we can use it after it has been freed by the enslave error cleanup path which frees the allocated slave memory. Slave update array is supposed to be called last when further enslave failures are not expected. Move it after xdp setup to avoid any problems. It is very easy to reproduce the problem with a simple xdp_pass prog: ip l add bond1 type bond mode balance-xor ip l set bond1 up ip l set dev bond1 xdp object xdp_pass.o sec xdp_pass ip l add dumdum type dummy Then run in parallel: while :; do ip l set dumdum master bond1 1>/dev/null 2>&1; done; mausezahn bond1 -a own -b rand -A rand -B 1.1.1.1 -c 0 -t tcp "dp=1-1023, flags=syn" The crash happens almost immediately: [ 605.602850] Oops: general protection fault, probably for non-canonical address 0xe0e6fc2460000137: 0000 [#1] SMP KASAN NOPTI [ 605.602916] KASAN: maybe wild-memory-access in range [0x07380123000009b8-0x07380123000009bf] [ 605.602946] CPU: 0 UID: 0 PID: 2445 Comm: mausezahn Kdump: loaded Tainted: G B 6.19.0-rc6+ #21 PREEMPT(voluntary) [ 605.602979] Tainted: [B]=BAD_PAGE [ 605.602998] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 605.603032] RIP: 0010:netdev_core_pick_tx+0xcd/0x210 [ 605.603063] Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 3e 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 6b 08 49 8d 7d 30 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 25 01 00 00 49 8b 45 30 4c 89 e2 48 89 ee 48 89 [ 605.603111] RSP: 0018:ffff88817b9af348 EFLAGS: 00010213 [ 605.603145] RAX: dffffc0000000000 RBX: ffff88817d28b420 RCX: 0000000000000000 [ 605.603172] RDX: 00e7002460000137 RSI: 0000000000000008 RDI: 07380123000009be [ 605.603199] RBP: ffff88817b541a00 R08: 0000000000000001 R09: fffffbfff3ed8c0c [ 605.603226] R10: ffffffff9f6c6067 R11: 0000000000000001 R12: 0000000000000000 [ 605.603253] R13: 073801230000098e R14: ffff88817d28b448 R15: ffff88817b541a84 [ 605.603286] FS: 00007f6570ef67c0(0000) GS:ffff888221dfa000(0000) knlGS:0000000000000000 [ 605.603319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 605.603343] CR2: 00007f65712fae40 CR3: 000000011371b000 CR4: 0000000000350ef0 [ 605.603373] Call Trace: [ 605.603392] <TASK> [ 605.603410] __dev_queue_xmit+0x448/0x32a0 [ 605.603434] ? __pfx_vprintk_emit+0x10/0x10 [ 605.603461] ? __pfx_vprintk_emit+0x10/0x10 [ 605.603484] ? __pfx___dev_queue_xmit+0x10/0x10 [ 605.603507] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603546] ? _printk+0xcb/0x100 [ 605.603566] ? __pfx__printk+0x10/0x10 [ 605.603589] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603627] ? add_taint+0x5e/0x70 [ 605.603648] ? add_taint+0x2a/0x70 [ 605.603670] ? end_report.cold+0x51/0x75 [ 605.603693] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603731] bond_start_xmit+0x623/0xc20 [bonding] | ||||
| CVE-2026-23151 | 1 Linux | 1 Linux Kernel | 2026-05-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix memory leak in set_ssp_complete Fix memory leak in set_ssp_complete() where mgmt_pending_cmd structures are not freed after being removed from the pending list. Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") replaced mgmt_pending_foreach() calls with individual command handling but missed adding mgmt_pending_free() calls in both error and success paths of set_ssp_complete(). Other completion functions like set_le_complete() were fixed correctly in the same commit. This causes a memory leak of the mgmt_pending_cmd structure and its associated parameter data for each SSP command that completes. Add the missing mgmt_pending_free(cmd) calls in both code paths to fix the memory leak. Also fix the same issue in set_advertising_complete(). | ||||
| CVE-2025-39981 | 1 Linux | 1 Linux Kernel | 2026-05-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix possible UAFs This attemps to fix possible UAFs caused by struct mgmt_pending being freed while still being processed like in the following trace, in order to fix mgmt_pending_valid is introduce and use to check if the mgmt_pending hasn't been removed from the pending list, on the complete callbacks it is used to check and in addtion remove the cmd from the list while holding mgmt_pending_lock to avoid TOCTOU problems since if the cmd is left on the list it can still be accessed and freed. BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_sync+0x35/0x50 net/bluetooth/mgmt.c:5223 Read of size 8 at addr ffff8880709d4dc0 by task kworker/u11:0/55 CPU: 0 UID: 0 PID: 55 Comm: kworker/u11:0 Not tainted 6.16.4 #2 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 mgmt_add_adv_patterns_monitor_sync+0x35/0x50 net/bluetooth/mgmt.c:5223 hci_cmd_sync_work+0x210/0x3a0 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xade/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x711/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16.4/arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 12210: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4364 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] mgmt_pending_new+0x65/0x1e0 net/bluetooth/mgmt_util.c:269 mgmt_pending_add+0x35/0x140 net/bluetooth/mgmt_util.c:296 __add_adv_patterns_monitor+0x130/0x200 net/bluetooth/mgmt.c:5247 add_adv_patterns_monitor+0x214/0x360 net/bluetooth/mgmt.c:5364 hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719 hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:729 sock_write_iter+0x258/0x330 net/socket.c:1133 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x5c9/0xb30 fs/read_write.c:686 ksys_write+0x145/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 12221: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x62/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2381 [inline] slab_free mm/slub.c:4648 [inline] kfree+0x18e/0x440 mm/slub.c:4847 mgmt_pending_free net/bluetooth/mgmt_util.c:311 [inline] mgmt_pending_foreach+0x30d/0x380 net/bluetooth/mgmt_util.c:257 __mgmt_power_off+0x169/0x350 net/bluetooth/mgmt.c:9444 hci_dev_close_sync+0x754/0x1330 net/bluetooth/hci_sync.c:5290 hci_dev_do_close net/bluetooth/hci_core.c:501 [inline] hci_dev_close+0x108/0x200 net/bluetooth/hci_core.c:526 sock_do_ioctl+0xd9/0x300 net/socket.c:1192 sock_ioctl+0x576/0x790 net/socket.c:1313 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf ---truncated--- | ||||
| CVE-2023-52920 | 1 Linux | 1 Linux Kernel | 2026-05-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: support non-r10 register spill/fill to/from stack in precision tracking Use instruction (jump) history to record instructions that performed register spill/fill to/from stack, regardless if this was done through read-only r10 register, or any other register after copying r10 into it *and* potentially adjusting offset. To make this work reliably, we push extra per-instruction flags into instruction history, encoding stack slot index (spi) and stack frame number in extra 10 bit flags we take away from prev_idx in instruction history. We don't touch idx field for maximum performance, as it's checked most frequently during backtracking. This change removes basically the last remaining practical limitation of precision backtracking logic in BPF verifier. It fixes known deficiencies, but also opens up new opportunities to reduce number of verified states, explored in the subsequent patches. There are only three differences in selftests' BPF object files according to veristat, all in the positive direction (less states). File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF) -------------------------------------- ------------- --------- --------- ------------- ---------- ---------- ------------- test_cls_redirect_dynptr.bpf.linked3.o cls_redirect 2987 2864 -123 (-4.12%) 240 231 -9 (-3.75%) xdp_synproxy_kern.bpf.linked3.o syncookie_tc 82848 82661 -187 (-0.23%) 5107 5073 -34 (-0.67%) xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 85116 84964 -152 (-0.18%) 5162 5130 -32 (-0.62%) Note, I avoided renaming jmp_history to more generic insn_hist to minimize number of lines changed and potential merge conflicts between bpf and bpf-next trees. Notice also cur_hist_entry pointer reset to NULL at the beginning of instruction verification loop. This pointer avoids the problem of relying on last jump history entry's insn_idx to determine whether we already have entry for current instruction or not. It can happen that we added jump history entry because current instruction is_jmp_point(), but also we need to add instruction flags for stack access. In this case, we don't want to entries, so we need to reuse last added entry, if it is present. Relying on insn_idx comparison has the same ambiguity problem as the one that was fixed recently in [0], so we avoid that. [0] https://patchwork.kernel.org/project/netdevbpf/patch/20231110002638.4168352-3-andrii@kernel.org/ | ||||