Export limit exceeded: 353738 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (353738 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-9430 | 1 Tenda | 2 F1202, F1202 Firmware | 2026-05-28 | 8.8 High |
| A vulnerability was determined in Tenda F1202 1.2.0.20(408). Affected by this issue is the function formGstDhcpSetSer of the file /goform/GstDhcpSetSerof. Executing a manipulation of the argument dips can lead to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. | ||||
| CVE-2026-46106 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: eventfs: Hold eventfs_mutex and SRCU when remount walks events Commit 340f0c7067a9 ("eventfs: Update all the eventfs_inodes from the events descriptor") had eventfs_set_attrs() recurse through ei->children on remount. The walk only holds the rcu_read_lock() taken by tracefs_apply_options() over tracefs_inodes, which is wrong: - list_for_each_entry over ei->children races with the list_del_rcu() in eventfs_remove_rec() -- LIST_POISON1 deref, same shape as d2603279c7d6. - eventfs_inodes are freed via call_srcu(&eventfs_srcu, ...). rcu_read_lock() does not extend an SRCU grace period, so ti->private can be reclaimed under the walk. - The writes to ei->attr race with eventfs_set_attr(), which holds eventfs_mutex. Reproducer: while :; do mount -o remount,uid=$((RANDOM%1000)) /sys/kernel/tracing; done & while :; do echo "p:kp submit_bio" > /sys/kernel/tracing/kprobe_events echo > /sys/kernel/tracing/kprobe_events done Wrap the events portion of tracefs_apply_options() in eventfs_remount_lock()/_unlock() that take eventfs_mutex and srcu_read_lock(&eventfs_srcu). eventfs_set_attrs() doesn't sleep so the nested rcu_read_lock() is fine; lockdep_assert_held() pins the contract. Comment in tracefs_drop_inode() said "RCU cycle" -- it is SRCU. | ||||
| CVE-2026-46108 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipmi:si: Return state to normal if message allocation fails There were places where nothing would get started if a message allocation failed, so the driver needs to return to normal state. | ||||
| CVE-2026-46113 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Fix shadow paging use-after-free due to unexpected GFN The shadow MMU computes GFNs for direct shadow pages using sp->gfn plus the SPTE index. This assumption breaks for shadow paging if the guest page tables are modified between VM entries (similar to commit aad885e77496, "KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE", 2026-03-27). The flow is as follows: - a PDE is installed for a 2MB mapping, and a page in that area is accessed. KVM creates a kvm_mmu_page consisting of 512 4KB pages; the kvm_mmu_page is marked by FNAME(fetch) as direct-mapped because the guest's mapping is a huge page (and thus contiguous). - the PDE mapping is changed from outside the guest. - the guest accesses another page in the same 2MB area. KVM installs a new leaf SPTE and rmap entry; the SPTE uses the "correct" GFN (i.e. based on the new mapping, as changed in the previous step) but that GFN is outside of the [sp->gfn, sp->gfn + 511] range; therefore the rmap entry cannot be found and removed when the kvm_mmu_page is zapped. - the memslot that covers the first 2MB mapping is deleted, and the kvm_mmu_page for the now-invalid GPA is zapped. However, rmap_remove() only looks at the [sp->gfn, sp->gfn + 511] range established in step 1, and fails to find the rmap entry that was recorded by step 3. - any operation that causes an rmap walk for the same page accessed by step 3 then walks a stale rmap and dereferences a freed kvm_mmu_page. This includes dirty logging or MMU notifier invalidations (e.g., from MADV_DONTNEED). The underlying issue is that KVM's walking of shadow PTEs assumes that if a SPTE is present when KVM wants to install a non-leaf SPTE, then the existing kvm_mmu_page must be for the correct gfn. Because the only way for the gfn to be wrong is if KVM messed up and failed to zap a SPTE... which shouldn't happen, but *actually* only happens in response to a guest write. That bug dates back literally forever, as even the first version of KVM assumes that the GFN matches and walks into the "wrong" shadow page. However, that was only an imprecision until 2032a93d66fa ("KVM: MMU: Don't allocate gfns page for direct mmu pages") came along. Fix it by checking for a target gfn mismatch and zapping the existing SPTE. That way the old SP and rmap entries are gone, KVM installs the rmap in the right location, and everyone is happy. | ||||
| CVE-2026-46117 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Remove user triggerable WARN_ON() in mana_ib_create_qp_rss() Sashiko points out that the user can specify WQs sharing the same CQ as a part of the uAPI and this will trigger the WARN_ON() then go on to corrupt the kernel. Just reject it outright and fail the QP creation. | ||||
| CVE-2026-46119 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Fix slab-out-of-bounds access in auth message processing If a (potentially corrupted) message of type CEPH_MSG_AUTH_REPLY contains a positive value in its result field, it is treated as an error code by ceph_handle_auth_reply() and returned to handle_auth_reply(). Thereafter, an attempt is made to send the preallocated message of type CEPH_MSG_AUTH, where the returned value is interpreted as the size of the front segment to send. If the result value in the message is greater than the size of the memory buffer allocated for the front segment, an out-of-bounds access occurs, and the content of the memory region beyond this buffer is sent out. This patch fixes the issue by treating only negative values in the result field as errors. Positive values are therefore treated as success in the same way as a zero value. Additionally, a BUG_ON is added to __send_prepared_auth_request() comparing the len parameter to front_alloc_len to prevent sending the message if it exceeds the bounds of the allocation and to make it easier to catch any logic flaws leading to this. | ||||
| CVE-2026-46137 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: ADD_ADDR rtx: fix potential data-race This mptcp_pm_add_timer() helper is executed as a timer callback in softirq context. To avoid any data races, the socket lock needs to be held with bh_lock_sock(). If the socket is in use, retry again soon after, similar to what is done with the keepalive timer. | ||||
| CVE-2026-46141 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/xive: fix kmemleak caused by incorrect chip_data lookup The kmemleak reports the following memory leak: Unreferenced object 0xc0000002a7fbc640 (size 64): comm "kworker/8:1", pid 540, jiffies 4294937872 hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 09 04 00 04 00 00 ................ 00 00 a7 81 00 00 0a c0 00 00 08 04 00 04 00 00 ................ backtrace (crc 177d48f6): __kmalloc_cache_noprof+0x520/0x730 xive_irq_alloc_data.constprop.0+0x40/0xe0 xive_irq_domain_alloc+0xd0/0x1b0 irq_domain_alloc_irqs_parent+0x44/0x6c pseries_irq_domain_alloc+0x1cc/0x354 irq_domain_alloc_irqs_parent+0x44/0x6c msi_domain_alloc+0xb0/0x220 irq_domain_alloc_irqs_locked+0x138/0x4d0 __irq_domain_alloc_irqs+0x8c/0xfc __msi_domain_alloc_irqs+0x214/0x4d8 msi_domain_alloc_irqs_all_locked+0x70/0xf8 pci_msi_setup_msi_irqs+0x60/0x78 __pci_enable_msix_range+0x54c/0x98c pci_alloc_irq_vectors_affinity+0x16c/0x1d4 nvme_pci_enable+0xac/0x9c0 [nvme] nvme_probe+0x340/0x764 [nvme] This occurs when allocating MSI-X vectors for an NVMe device. During allocation the XIVE code creates a struct xive_irq_data and stores it in irq_data->chip_data. When the MSI-X irqdomain is later freed, xive_irq_free_data() is responsible for retrieving this structure and freeing it. However, after commit cc0cc23babc9 ("powerpc/xive: Untangle xive from child interrupt controller drivers"), xive_irq_free_data() retrieves the chip_data using irq_get_chip_data(), which looks up the data through the child domain. This is incorrect because the XIVE-specific irq data is associated with the XIVE (parent) domain. As a result the lookup fails and the allocated struct xive_irq_data is never freed, leading to the kmemleak report shown above. Fix this by retrieving the irq_data from the correct domain using irq_domain_get_irq_data() and then accessing the chip_data via irq_data_get_irq_chip_data(). | ||||
| CVE-2026-46155 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: fix out-of-bounds read in smb2_compound_op() If a server sends a truncated response but a large OutputBufferLength, and terminates the EA list early, check_wsl_eas() returns success without validating that the entire OutputBufferLength fits within iov_len. Then smb2_compound_op() does: memcpy(idata->wsl.eas, data[0], size[0]); Where size[0] is OutputBufferLength. If iov_len is smaller than size[0], memcpy can read beyond the end of the rsp_iov allocation and leak adjacent kernel heap memory. | ||||
| CVE-2026-46228 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: ch341: fix devres lifetime USB drivers bind to USB interfaces and any device managed resources should have their lifetime tied to the interface rather than parent USB device. This avoids issues like memory leaks when drivers are unbound without their devices being physically disconnected (e.g. on probe deferral or configuration changes). Fix the controller and driver data lifetime so that they are released on driver unbind. Note that this also makes sure that the SPI controller is placed correctly under the USB interface in the device tree. | ||||
| CVE-2026-46229 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Clear VRAM on allocation to prevent stale data exposure KFD VRAM allocations set AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE but not AMDGPU_GEM_CREATE_VRAM_CLEARED, leaving freshly allocated VRAM with stale data from prior use observable by compute kernels. The GEM ioctl path already sets VRAM_CLEARED for all userspace allocations via amdgpu_gem_create_ioctl() and amdgpu_mode_dumb_create(). The KFD path was missing this flag, allowing stale page table remnants to leak into user buffers. This causes crashes in RCCL P2P transport where non-zero data in ptrExchange/head/tail fields corrupts the protocol handshake. | ||||
| CVE-2026-46230 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn3: Prevent OOB reads when parsing dec msg Check bounds against the end of the BO whenever we access the msg. | ||||
| CVE-2026-46234 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vsock: fix buffer size clamping order In vsock_update_buffer_size(), the buffer size was being clamped to the maximum first, and then to the minimum. If a user sets a minimum buffer size larger than the maximum, the minimum check overrides the maximum check, inverting the constraint. This breaks the intended socket memory boundaries by allowing the vsk->buffer_size to grow beyond the configured vsk->buffer_max_size. Fix this by checking the minimum first, and then the maximum. This ensures the buffer size never exceeds the buffer_max_size. | ||||
| CVE-2026-46238 | 1 Linux | 1 Linux Kernel | 2026-05-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: stop caching unowned originator pointers in BAT IV BAT IV keeps the last-hop neighbor address in each neigh_node, but some paths also cache an originator pointer derived from a temporary lookup. That pointer is not owned by the neigh_node and may no longer refer to a live originator entry after purge handling runs. Stop storing the auxiliary originator pointer in the BAT IV neighbor state. When BAT IV needs the neighbor originator data, resolve it from the stored neighbor address and drop the reference again after use. [sven: avoid bonding logic for outgoing OGM] | ||||
| CVE-2025-13955 | 1 Actions-micro | 2 Ezcast Pro Ii, Ezcast Pro Ii Firmware | 2026-05-28 | N/A |
| Predictable default Wi-Fi Password in Access Point functionality in EZCast Pro II before version 1.17478.177 allows attackers in Wi-Fi range to gain access to the dongle by calculating the default password from observable device identifiers | ||||
| CVE-2026-40914 | 2026-05-28 | N/A | ||
| A vulnerability exists in Apache Artemis whereby an application using the STOMP protocol with security credentials that grant either the consume or send permission on an address can augment the routing-type supported by that address even if said user doesn't have the createAddress permission for that particular address. A user could successfully send a message to an address or consume a message from a queue with a routing-type not supported by the corresponding address when that operation should actually be rejected on the basis that the user doesn't have permission to change the routing-type of the address. Even though the user was already granted permission to send and/or consume messages, they should not be able to augment the routing-type of the address without the createAddress permission. This issue affects Apache Artemis: from 2.50.0 through 2.53.0; Apache ActiveMQ Artemis: from 2.0.0 through 2.44.0. Users are recommended to upgrade to version 2.54.0, which fixes the issue. | ||||
| CVE-2025-13954 | 1 Actions-micro | 2 Ezcast Pro Ii, Ezcast Pro Ii Firmware | 2026-05-28 | N/A |
| Hard-coded cryptographic keys in Admin UI of EZCast Pro II before version 1.17478.177 allows attackers to bypass authorization checks and gain full access to the admin UI | ||||
| CVE-2026-9791 | 1 Redhat | 1 Build Keycloak | 2026-05-28 | 4.3 Medium |
| A flaw was found in Keycloak. An authenticated user with existing organization membership can exploit this flaw by accessing user-facing APIs, such as the account API or by requesting an OpenID Connect (OIDC) token with the 'organization' scope. This allows organization metadata to be disclosed in tokens, even after an administrator has explicitly disabled the Organizations feature, potentially leading to incorrect authorization decisions by resource servers. | ||||
| CVE-2026-9796 | 1 Redhat | 1 Build Keycloak | 2026-05-28 | 6.5 Medium |
| A flaw was found in Keycloak. An authenticated administrator with the `manage-clients` role can exploit a Time-of-check to time-of-use (TOCTOU) vulnerability in the name-based admin role checks. This allows the attacker to escalate their privileges to `realm-admin` for all users within the realm, granting them extensive control over the system. The composite role relationship persists even after the attacker's own permissions are revoked and across system reboots. | ||||
| CVE-2025-48977 | 2026-05-28 | N/A | ||
| Relative Path Traversal vulnerability in Apache Ignite REST API. Authenticated REST API users can read any file on the server with "cmd=log" command and a log path crafted in a certain way. This issue affects Apache Ignite: from 2.0.0 through 2.17.0. Users are recommended to upgrade to version 2.18.0, which fixes the issue. | ||||