Export limit exceeded: 384309 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 384309 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (384309 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80641 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: enable the right set of ciphers The firmware version number check for IGTK introduced in commit c34dbc5900b0 ("wifi: wlcore: Add support for IGTK key") lets the amount of ciphers decrease on every boot of a too old firmware and that is practically happening. It also does not take into account other chips than the wl18xx. On some wl128x, the following can be observed when connecting via nm to a common ap: [ 484.113311] wlcore: WARNING could not set keys [ 484.117828] wlcore: ERROR Could not add or replace key [ 484.123016] wlan0: failed to set key (5, ff:ff:ff:ff:ff:ff) to hardware (-5) [ 484.123046] wlcore: Hardware recovery in progress. FW ver: Rev 7.3.10.0.142 [ 484.139923] wlcore: pc: 0x0, hint_sts: 0x00000048 count: 1 [ 484.145721] wlcore: down [ 484.148986] ieee80211 phy0: Hardware restart was requested [ 484.610473] wlcore: firmware booted (Rev 7.3.10.0.142) [ 484.633758] wlcore: Association completed. [ 484.690490] wlcore: ERROR command execute failure 14 [ 484.690490] ------------[ cut here ]------------ [ 484.700195] WARNING: drivers/net/wireless/ti/wlcore/main.c:872 at wl12xx_queue_recovery_work+0x64/0x74 [wlcore], CPU#0: kworker/0:0/892 This repeats endlessly. Always disable IGTK on wl12xx and fix the decrementing mess. | ||||
| CVE-2026-80658 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: dw_dp: Fix null-ptr-deref in dw_dp_remove() Attempting to access driver data in the platform driver ->remove() callback may lead to a null pointer dereference since there is no guaranty that the component ->bind() callback invoking platform_set_drvdata() was executed. A common scenario is when Rockchip DRM driver didn't manage to run component_bind_all() because of an (unrelated) error causing early return from rockchip_drm_bind(). Drop the unnecessary call to platform_get_drvdata() and, instead, reference the target device structure via platform_device. | ||||
| CVE-2026-80666 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: sco: Fix a race condition in sco_sock_timeout() sco_sock_timeout() runs asynchronously and lock_sock(sk). If the socket is closing while the timer is running, it holds the same lock (lock_sock(sk)) twice, leading to a deadlock. CPU 0 CPU 1 ==================== ====================== sco_sock_close() sco_sock_timeout() lock_sock(sk) // <-- LOCK __sco_sock_close() sco_chan_del() sco_conn_put() sco_conn_free() disable_delayed_work_sync() lock(sk) // <-- SAME LOCK Fix this by moving disable_delayed_work_sync() outside of lock_sock(sk), ensuring that no lock_sock(sk) is held before sco_sock_timeout(). Lockdep splat: WARNING: possible circular locking dependency detected 6.13.0-rc4 #7 Not tainted syz-executor292/9514 is trying to acquire lock: ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: rcu_lock_acquire sect/v6.13-rc4/./include/linux/rcupdate.h:337 [inline] ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: rcu_read_lock sect/v6.13-rc4/./include/linux/rcupdate.h:849 [inline] ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: start_flush_work sect/v6.13-rc4/kernel/workqueue.c:4137 [inline] ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: __flush_work+0xd1/0xc40 sect/v6.13-rc4/kernel/workqueue.c:4195 but task is already holding lock: ffff88807db3a258 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: lock_sock sect/v6.13-rc4/./include/net/sock.h:1623 [inline] ffff88807db3a258 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: sco_sock_close+0x25/0x100 sect/v6.13-rc4/net/bluetooth/sco.c:524 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}: lock_acquire+0x1c4/0x520 sect/v6.13-rc4/kernel/locking/lockdep.c:5849 lock_sock_nested+0x48/0x130 sect/v6.13-rc4/net/core/sock.c:3622 lock_sock sect/v6.13-rc4/./include/net/sock.h:1623 [inline] sco_sock_timeout+0xbe/0x270 sect/v6.13-rc4/net/bluetooth/sco.c:158 process_one_work sect/v6.13-rc4/kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa99/0x18f0 sect/v6.13-rc4/kernel/workqueue.c:3310 worker_thread+0x8a9/0xd80 sect/v6.13-rc4/kernel/workqueue.c:3391 kthread+0x2c6/0x360 sect/v6.13-rc4/kernel/kthread.c:389 ret_from_fork+0x4e/0x80 sect/v6.13-rc4/arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 sect/v6.13-rc4/arch/x86/entry/entry_64.S:244 -> #0 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}: check_prev_add sect/v6.13-rc4/kernel/locking/lockdep.c:3161 [inline] check_prevs_add sect/v6.13-rc4/kernel/locking/lockdep.c:3280 [inline] validate_chain+0x1888/0x5760 sect/v6.13-rc4/kernel/locking/lockdep.c:3904 __lock_acquire+0x13b4/0x2120 sect/v6.13-rc4/kernel/locking/lockdep.c:5226 lock_acquire+0x1c4/0x520 sect/v6.13-rc4/kernel/locking/lockdep.c:5849 touch_work_lockdep_map sect/v6.13-rc4/kernel/workqueue.c:3909 [inline] start_flush_work sect/v6.13-rc4/kernel/workqueue.c:4163 [inline] __flush_work+0x70f/0xc40 sect/v6.13-rc4/kernel/workqueue.c:4195 __cancel_work_sync sect/v6.13-rc4/kernel/workqueue.c:4351 [inline] disable_delayed_work_sync+0xbb/0xf0 sect/v6.13-rc4/kernel/workqueue.c:4514 sco_conn_free sect/v6.13-rc4/net/bluetooth/sco.c:95 [inline] kref_put sect/v6.13-rc4/./include/linux/kref.h:65 [inline] sco_conn_put+0x18f/0x270 sect/v6.13-rc4/net/bluetooth/sco.c:107 sco_chan_del+0xe2/0x210 sect/v6.13-rc4/net/bluetooth/sco.c:236 sco_sock_close+0x8f/0x100 sect/v6.13-rc4/net/bluetooth/sco.c:526 sco_sock_release+0x62/0x2d0 sect/v6.13-rc4/net/blueto ---truncated--- | ||||
| CVE-2026-80667 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: LAG, MPESW, Fix missing complete() on devcom error mlx5_mpesw_work() returned without calling complete() when mlx5_lag_get_devcom_comp() returned NULL. A caller that queued the work and waited on mpesww->comp would block indefinitely. Funnel the early-return path through a new "complete" label so the waiter is always woken. | ||||
| CVE-2026-80672 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix u16 truncation of restart-area length check ntfs_check_restart_area() validates that the $LogFile restart area and its trailing log client record array fit within the system page size: u16 ra_ofs, ra_len, ca_ofs; ... ra_len = ca_ofs + le16_to_cpu(ra->log_clients) * sizeof(struct log_client_record); if (ra_ofs + ra_len > le32_to_cpu(rp->system_page_size) || ...) return false; ra_len is u16, but the right-hand side is computed in size_t (sizeof(struct log_client_record) == 160). Both ca_ofs and log_clients come straight from the on-disk restart area. With an on-disk log_clients of 410 the product 410 * 160 = 65600; adding ca_ofs and storing into the u16 ra_len truncates modulo 65536 (e.g. ca_ofs 64 gives ra_len 128), so the "fits in the page" check passes even though the client array described by log_clients extends far beyond the page. ntfs_check_log_client_array() then walks the array bounded only by the on-disk log_clients count: cr = ca + idx; if (cr->prev_client != LOGFILE_NO_CLIENT) ... For log_clients 410 it dereferences records up to ca + 409 * 160, ~64 KiB past the kvzalloc(system_page_size) restart-page buffer -- an out-of-bounds read of attacker-controlled extent, reachable when a crafted NTFS image is mounted (load_and_check_logfile() at mount time). This is the in-kernel analogue of CVE-2022-30789, fixed in the ntfs-3g userspace driver but never in this revived classic driver. Compute the restart-area length in a u32 so the existing bounds check rejects an over-large client array instead of being defeated by the truncation. Widen ra_ofs and ca_ofs to u32 as well: both are loaded from __le16 on-disk fields and every comparison already promotes to int/size_t, so this changes no result and keeps the declaration uniform. | ||||
| CVE-2026-80680 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: amd-mp2: Unregister callback on adapter add failure amd_mp2_register_cb() stores the platform I2C context in the MP2 PCI driver's callback table before the adapter is registered. If i2c_add_adapter() fails, probe returns and devres frees the context, but the PCI driver can still dereference the stale pointer from its IRQ and system-sleep callbacks. Unregister the callback before returning the adapter registration error. | ||||
| CVE-2026-80685 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/util: don't read __page_2 for order-1 folios in snapshot_page() snapshot_page() currently reads __page_2 after checking nr_pages > 1, but it should only do so when nr_pages > 2. If an order-1 folio is allocated at the end of a vmemmap section, __page_2 will not exist and reading it will cause a fault. During DLPAR memory remove on a 22 TB ppc64le LPAR, snapshot_page() oopsed on the page isolation path while reading an order-1 folio's __page_2 from an adjacent absent section (unmapped vmemmap). Fix this to avoid reading memmap that doesn't exist (e.g., a vmemmap hole). | ||||
| CVE-2026-80700 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate external BO copy bounds for both stride paths vmw_external_bo_copy() trusts caller-supplied offsets, strides, and heights and operates on imported dma-buf vmaps: - The equal-stride memcpy() bound was clamped after subtracting the offsets from dst_size and src_size; an offset larger than the BO size wraps the unsigned subtraction to a huge value and the resulting memcpy() runs off the end of the vmap. dst_stride * height is also a u32 multiplication that can overflow. - The non-equal-stride row-by-row path had no bound at all. The loop touches bytes through offset + (height - 1) * stride + width_in_bytes, with only a WARN_ON(dst_stride < width_in_bytes), and could likewise step past the end of either mapping. The offsets and strides are derived from STDU/SOU plane state, so a configured CRTC submitting a crafted atomic commit on an imported framebuffer can reach this path. Validate the exact row-copy endpoint against each BO's size up front using check_mul_overflow() and check_add_overflow(). Use the bulk memcpy() path only when width_in_bytes covers the whole stride; otherwise copy one row at a time so partial-row updates near the bottom of a framebuffer remain valid. Also reject zero strides and stride < width_in_bytes, both of which the row-by-row path cannot represent safely. | ||||
| CVE-2026-80705 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: check if dml21_add_phantom_plane() is successful Verify that the phantom plane was allocated to avoid a later segfault. (cherry picked from commit 5adb54abe5a8e82cbff7f8806db30a5f4924329f) | ||||
| CVE-2026-80708 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix missing mem scrub at clear key import in cca_clr2cipherkey() The helper function _ip_cprb_helper() uses internal buffer memory for building and processing CPRBs. After use this buffer was never scrubbed which could lead to leaving for example clear key material in memory which could be exposed via tricky reuse of this same memory. Extend the _ip_cprb_helper() function with another parameter 'scrub' used to steer scrubbing of this buffer. So now the caller has the opportunity to decide if scrubbing is needed or not. Extend the clear key to secure key token import process in function cca_clr2cipherkey() to tell the helper function from above to scrub the cprb buffer when the clear key value is part of the request data. Add explicit scrubbing on return from function cca_clr2cipherkey() for the random EXOR buffer and the cprb buffer. Overall this cleans the internal used buffer in case of clear key import to prevent sensitive data to get exposed. | ||||
| CVE-2026-80711 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: max17040: handle missing status supplier MAX17040 does not report charger state itself, so the driver forwards POWER_SUPPLY_PROP_STATUS to a supplier power supply. If no supplier is registered, power_supply_get_property_from_supplier() returns -ENODEV and leaves the output value untouched. max17040_get_property() currently ignores that error and returns success, so userspace can read an uninitialized status value from the battery power supply. This happens on systems that use the fuel gauge without a charger supplier relationship in firmware. Return POWER_SUPPLY_STATUS_UNKNOWN when no supplier provides STATUS, and propagate other supplier lookup errors. | ||||
| CVE-2026-80718 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/percpu-km: fix bitmap overflow and accounting in pcpu_create_chunk() In pcpu_create_chunk(), nr_pages is the total contiguous backing allocation, i.e., nr_units * pcpu_unit_pages, but pcpu_chunk_populated() uses it to set chunk->populated, whose size is pcpu_unit_pages, bitmap. Since bit N in chunk->populated means page offset N inside every unit is backed. When nr_units > 1, the function writes beyond chunk->populated. Fix it by using chunk->nr_pages. It also fixes the global pcpu_nr_empty_pop_pages accounting, since pcpu_balance_free() only iterates up to chunk->nr_pages. Commit a63d4ac4ab609 ("percpu: make percpu-km set chunk->populated bitmap properly") introduced the bitmap overflow issue. Later, commit b539b87fed37f ("percpu: implmeent pcpu_nr_empty_pop_pages and chunk->nr_populated") added pcpu_nr_empty_pop_pages and caused the accounting issue. | ||||
| CVE-2026-80722 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate individual TWT params before driver setup ieee80211_process_rx_twt_action() only partially validates a received S1G TWT setup frame before queueing it. An individual agreement can therefore reach ieee80211_s1g_rx_twt_setup() with twt->length too short for the full struct ieee80211_twt_params. The individual path passes twt to drv_add_twt_setup(). Both the tracepoint and the driver callback consume the complete parameters block, not merely req_type. Do not pass a short individual agreement to the driver. Broadcast agreements remain unchanged because they are rejected locally after accessing only req_type. [edit commit message to not overclaim lack of validation nor understate driver impact] | ||||
| CVE-2026-80724 | 1 Linux | 1 Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ptp: vmclock: prevent read-only mappings from becoming writable vmclock_miscdev_mmap() rejects writable mappings of the shared vmclock ABI page with -EROFS, but leaves VM_MAYWRITE set. Userspace can map the page read-only and then upgrade it to writable with mprotect(), after which the guest can corrupt the host-written timekeeping data (sequence counter, UTC time, TSC offset) that the vmclock ABI defines as read-only. Clear VM_MAYWRITE on the read-only path so the mapping cannot be upgraded, as i915 does for its read-only objects and as fixed in drm/vc4 (CVE-2026-68445) and drm/panthor (CVE-2024-53071). | ||||
| CVE-2026-9548 | 2026-08-28 | 6.5 Medium | ||
| An improper neutralization of input during web page generation ('Cross-site Scripting') vulnerability in extract domain in Synology Chat Server before 2.4.5-22148 allows remote authenticated users, via a UI interaction, to read or write restricted files and conduct limited denial-of-service attacks in DSM. | ||||
| CVE-2026-80719 | 1 Linux | 2 Kernel, Linux Kernel | 2026-08-28 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm: mglru: fix stale batch updates after memcg reparenting The mglru page table walker batches per-generation size deltas in walk->nr_pages while walking page tables without holding the lruvec lock. The reset_batch_size() later folds those deltas into walk->lruvec under the lruvec lock. The page table walker can run concurrently with the memcg reparenting path as follows: CPU0 CPU1 ==== ==== walk_mm --> walk_page_range --> update_batch_size --> walk->nr_pages += delta mem_cgroup_css_offline --> memcg_reparent_objcgs --> lock lruvec lru_gen_reparent_memcg --> reparent child folios to parent unlock lruvec lock lruvec reset_batch_size --> child lrugen->nr_pages += delta This will trigger the following warning in lru_gen_exit_memcg(): VM_WARN_ON_ONCE(memchr_inv(lruvec->lrugen.nr_pages, 0, sizeof(lruvec->lrugen.nr_pages))); And the user-visible impact of underestimated nr_pages in MGLRU was premature OOMs because MGLRU does not try to reclaim memory when nr_pages reaches zero, but there are still more pages. To fix it, make reset_batch_size() check CSS_DYING under RCU before flushing the pending batch. A non-dying memcg keeps the original lruvec stable against RCU-delayed offlining; a dying memcg redirects the deltas to the first non-dying ancestor. | ||||
| CVE-2026-82254 | 1 Gitoxidelabs | 1 Gitoxide | 2026-08-28 | 7.5 High |
| gitoxide before 0.69.0 contains unchecked array indexing in delta application and uncapped allocation from attacker-controlled size headers in gix-pack. Attackers can send crafted pack data during clone or fetch operations to trigger panics or out-of-memory process kills. | ||||
| CVE-2026-73571 | 2 Synacor, Zimbra | 2 Zimbra Collaboration Suite, Collaboration | 2026-08-28 | 3.1 Low |
| An authorization bypass vulnerability exists in Zimbra Collaboration (ZCS) before 10.1.17 due to improper authorization validation in delegated email sending functionality. An authenticated attacker can send specially crafted SOAP requests to impersonate another user and send emails without possessing the required delegation or send-as permissions. This occurs in the SaveDraftRequest SOAP handler. | ||||
| CVE-2026-73572 | 2 Synacor, Zimbra | 2 Zimbra Collaboration Suite, Collaboration | 2026-08-28 | 6.1 Medium |
| In Zimbra Collaboration (ZCS) before 10.1.17, a stored cross-site scripting (XSS) vulnerability exists in the Zimbra Classic Web Client due to insufficient sanitization of specific attachment content during inline preview. An attacker can send a crafted email containing a malicious attachment that, when previewed by a user, executes arbitrary JavaScript within the victim's browser session. Successful exploitation may allow an attacker to perform unauthorized actions on behalf of the victim user, potentially leading to data exfiltration or unauthorized access to sensitive information. | ||||
| CVE-2026-73573 | 2 Synacor, Zimbra | 2 Zimbra Collaboration Suite, Collaboration | 2026-08-28 | 3.1 Low |
| In Zimbra Collaboration (ZCS) before 10.1.17, a path traversal vulnerability exists in the Zimbra Briefcase document editing functionality due to improper validation of the packages parameter. An authenticated attacker can exploit this vulnerability by supplying a crafted path traversal sequence, potentially allowing unauthorized disclosure of sensitive files within the web application directory. | ||||