Export limit exceeded: 50051 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (50051 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64081 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Validate framework notification message layout Framework notifications carry an indirect message in the shared RX buffer. Validate the reported offset and size before using them, reject zero-length payloads, and ensure that any non-header payload starts at the UUID field rather than in the middle of the message header. Use the validated offset and size values for both kmemdup() and the UUID parsing path so malformed firmware data cannot drive an out-of-bounds read or an oversized allocation. | ||||
| CVE-2026-9698 | 2 Hmbrand, Perl | 2 Dbi, Dbi | 2026-09-03 | 7.5 High |
| DBI versions before 1.648 for Perl saved errors in a limited-sized buffer. Error messages that were returned when RaiseError, PrintError or HandleError were set were written to a 200-byte buffer without a length limit. Attackers that can influence the error text in an application can trigger a buffer overflow. | ||||
| CVE-2026-85031 | 1 Totolink | 2 Cp450, Cp450 Firmware | 2026-09-03 | 9.9 Critical |
| A vulnerability was found in TOTOLINK CP450 4.1.0. The impacted element is an unknown function of the file /cgi-bin/cstecgi.cgi. Performing a manipulation of the argument topicurl results in buffer overflow. Remote exploitation of the attack is possible. | ||||
| CVE-2026-80755 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: selinux: reject a permission value exceeding the class permission count perm_read() bounds a permission value by SEL_VEC_MAX but never by the nprim of the owning class or common, which is taken verbatim from the policy image. security_get_permissions() then writes perms[value - 1] into an nprim-sized kcalloc() array, so a class declaring fewer permissions than its largest permission value drives an out-of-bounds heap write. The top-level symbol tables are validated this way; the nested per-class permission table is not. Reject a permission whose value exceeds nprim, which is already set when perm_read() runs. Well-formed policies are unaffected. [PM: tweak comment for line length] | ||||
| CVE-2026-84126 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-09-03 | 4.3 Medium |
| Incorrect boundary conditions in the Layout: Grid component. This vulnerability was fixed in Firefox 155 and Thunderbird 155. | ||||
| CVE-2026-84145 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-09-03 | 7.5 High |
| Internally found bugs present in Thunderbird 154, Thunderbird ESR 153.1 and Thunderbird ESR 140.14. Some of these bugs showed evidence of memory corruption or another security-relevant defect and we presume that with enough effort some of these could have been exploited. This vulnerability was fixed in Firefox 155, Firefox ESR 115.40, Firefox ESR 140.15, Firefox ESR 153.2, Thunderbird 155, Thunderbird 140.15, and Thunderbird 153.2. | ||||
| CVE-2026-64084 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/adm1266) cap PDIO scan in get_multiple at ADM1266_PDIO_NR adm1266_gpio_get_multiple() iterates the PDIO portion of the caller-supplied mask using for_each_set_bit_from(gpio_nr, mask, ADM1266_GPIO_NR + ADM1266_PDIO_STATUS) { ... } where ADM1266_PDIO_STATUS is the PMBus command code (0xE9, i.e. 233), not the number of PDIO pins. The intended upper bound is ADM1266_GPIO_NR + ADM1266_PDIO_NR = 25. gpiolib hands in a mask sized for gc.ngpio (= 25 bits on this chip), so the iteration walks find_next_bit() up to 242, reading up to 217 extra bits (a handful of unsigned-long words: four on 64-bit, seven on 32-bit) of whatever lives past the end of the mask in the caller's stack. Any incidental set bit in that range then drives a set_bit(gpio_nr, bits) call that writes past the end of the caller-supplied bits array too -- both out-of-bounds. Substitute ADM1266_PDIO_NR for the constant so the scan stops at the last real PDIO bit. | ||||
| CVE-2026-64085 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/adm1266) bounce blackbox records through a protocol-sized buffer adm1266_pmbus_block_xfer() copies the device-supplied block payload into the caller-provided buffer using the device-supplied length: memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]); The helper does not know how large data_r is and trusts the device to return at most one record's worth of bytes. adm1266_nvmem_read_blackbox() violates that contract: it advances read_buff inside data->dev_mem in ADM1266_BLACKBOX_SIZE (64-byte) strides while the helper is willing to write up to ADM1266_PMBUS_BLOCK_MAX (255) bytes. A device that returns more than 64 bytes on the trailing record (read_buff offset 1984 in the 2048-byte dev_mem allocation) overflows dev_mem by up to 191 bytes before the post-call if (ret != ADM1266_BLACKBOX_SIZE) return -EIO; can reject the response. Contain the fix in the caller without changing the helper signature: read each record into a 255-byte local bounce buffer that matches the helper's maximum output, validate the returned length, and only then copy exactly ADM1266_BLACKBOX_SIZE bytes into the dev_mem slot. | ||||
| CVE-2026-84655 | 1 Jenkins Project | 1 Jenkins | 2026-09-03 | 4.3 Medium |
| Jenkins 2.579 and earlier, LTS 2.568.2 and earlier does not escape map keys when serializing objects as JSON and Python through its REST API, allowing attackers able to control map property names to inject arbitrary fields into JSON and Python API responses. | ||||
| CVE-2026-76755 | 1 Drupal | 1 Gammu Sms Daemon | 2026-09-03 | 5.9 Medium |
| Vulnerability in Drupal Gammu SMS Daemon. This issue affects Gammu SMS Daemon versions: *.*. | ||||
| CVE-2026-78689 | 1 F5 | 1 Nginx Javascript | 2026-09-03 | 8.1 High |
| Description NGINX JavaScript (njs) has a vulnerability in the XML module's namespace prefix list parser, reachable through the xml.exclusiveC14n() method. An unauthenticated remote attacker can trigger it when an affected NGINX configuration passes an externally controlled XML namespace prefix list to that method. Both the njs and the QuickJS (qjs) engines are affected. A crafted prefix list causes an out-of-bounds write past the end of a heap allocation. With the njs engine, which is the engine used when the js_engine directive is absent, this corrupts adjacent objects and crashes the NGINX worker. With the QuickJS engine, the same call additionally leaks the prefix list on every invocation, causing worker memory to grow across requests. The official nginxinc/nginx-saml reference implementation is affected during SAML signature verification. It reads InclusiveNamespaces/@PrefixList from an untrusted SAML message and passes it to xml.exclusiveC14n() before the signature has been verified, so a valid SAML signature is not required. A crafted SAML Response, Assertion, LogoutRequest, or LogoutResponse is sufficient. Code execution has not been demonstrated and cannot be ruled out for all platforms, as the effect of the out-of-bounds write depends on conditions beyond the attacker's control. Impact This vulnerability allows remote attackers to cause a denial of service on the NGINX system, either through repeatable worker restarts or through worker memory growth or possibly trigger code execution. There is no control plane exposure; this is a data plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. | ||||
| CVE-2026-66788 | 1 Redhat | 2 Acm, Advanced Cluster Management For Kubernetes | 2026-09-03 | 3.7 Low |
| A flaw was found in Lighthouse. A remote attacker, by compromising a spoke cluster, can exploit a vulnerability where the destination namespace for resource injection is derived from an attacker-controlled label or annotation on the broker object. This allows the attacker to inject unauthorized EndpointSlices and ServiceImports into any namespace on peer clusters, including critical system namespaces like kube-system and openshift-*. This could lead to privilege escalation or other forms of system compromise within the cluster. | ||||
| CVE-2026-66783 | 1 Redhat | 2 Acm, Advanced Cluster Management For Kubernetes | 2026-09-03 | 4.4 Medium |
| A flaw was found in the `submariner-operator` component of Red Hat Advanced Cluster Management for Kubernetes. This vulnerability allows a cluster administrator, or any user with permissions to modify the Submariner Custom Resource (CR), to specify an unvalidated image path. This lack of validation enables an attacker to execute arbitrary code with elevated privileges across the entire cluster, including control-plane nodes, by deploying a malicious image. | ||||
| CVE-2026-49869 | 2 Kestra, Kestra-io | 2 Kestra, Kestra | 2026-09-03 | 10 Critical |
| Kestra is an open-source, event-driven orchestration platform. Prior to 1.0.45 and 1.3.21, AuthenticationFilter in Kestra OSS uses request.getPath().endsWith("/configs") to whitelist the public configuration endpoint from Basic Auth. Because the check is a suffix match rather than an exact path match, any API path whose last segment is configs bypasses authentication entirely. An unauthenticated remote attacker can exploit this to create and execute arbitrary workflows without credentials. Because Kestra ships with script execution plugins (plugin-script-shell, plugin-script-python, etc.) enabled by default, this directly results in unauthenticated Remote Code Execution as root inside the Kestra worker container. This vulnerability is fixed in 1.0.45 and 1.3.21. | ||||
| CVE-2026-82958 | 1 Eclipse | 1 Eclipse Ditto | 2026-09-02 | N/A |
| In Eclipse Ditto versions [1.3.0, 3.9.6], the ImplicitThingCreationMessageMapper of the connectivity service builds a CreateThing command by substituting placeholder values (e.g. {{ header:device_id }}) resolved from inbound message headers into a pre-configured JSON "thing" template as raw, un-escaped strings, and then parses the resulting string as JSON. Because the placeholder engine performs no JSON escaping and is unaware of the surrounding JSON string context, a resolved value containing a double-quote character can break out of its string and inject additional JSON structure. When a connection is configured to use this mapper with a template that reflects a header whose value a publishing device can control (for example an MQTT 5 user property, an AMQP 1.0 application property, or a Kafka record header), an attacker able to publish on that connection can inject an inline _policy object. The inline policy overrides the administrator-configured policyId, letting the attacker assign an arbitrary access-control policy to the newly created digital twin — gaining full read/write access to it and potentially revoking the legitimate owner's access, with no administrator interaction. Exploitation requires all of the following: the connection uses the (non-default) ImplicitThingCreation mapper; its template reflects an attacker-controllable header; and, for the policy-override impact, the connection's authorization subjects are permitted to create policies (the default). Deployments that restrict the connection's subjects to thing creation only via the entity-creation configuration are not affected by the policy-override impact. | ||||
| CVE-2026-64054 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: shaper: reject duplicate leaves in GROUP request net_shaper_nl_group_doit() does not deduplicate NET_SHAPER_A_LEAVES entries. When userspace supplies the same leaf handle twice, the same old-parent pointer lands twice in old_nodes[]. The cleanup loop double frees the parent. Of course the same parent may still be in old_nodes[] twice if we are moving multiple of its leaves. Note that this patch also implicitly fixes the fact that the i >= leaves_count path forgets to set ret. | ||||
| CVE-2026-64058 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix netfs_read_folio() to wait on writeback Fix netfs_read_folio() to wait for an ongoing writeback to complete so that it can trust the dirty flag and whatever is attached to folio->private (folio->private may get cleaned up by the collector before it clears the writeback flag). | ||||
| CVE-2026-64047 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: tls: fix off-by-one in sg_chain entry count for wrapped sk_msg ring When an sk_msg scatterlist ring wraps (sg.end < sg.start), tls_push_record() chains the tail portion of the ring to the head using sg_chain(). An extra entry in the sg array is reserved for this: struct sk_msg_sg { [...] /* The extra two elements: * 1) used for chaining the front and sections when the list becomes * partitioned (e.g. end < start). The crypto APIs require the * chaining; * 2) to chain tailer SG entries after the message. */ struct scatterlist data[MAX_MSG_FRAGS + 2]; The current code uses MAX_SKB_FRAGS + 1 as the ring size: sg_chain(&msg_pl->sg.data[msg_pl->sg.start], MAX_SKB_FRAGS - msg_pl->sg.start + 1, msg_pl->sg.data); This places the chain pointer at sg_chain(data[start], (MAX_SKB_FRAGS - msg_start + 1) .. = &data[start] + (MAX_SKB_FRAGS - msg_start + 1) - 1 = data[start + (MAX_SKB_FRAGS - start + 1) - 1] = data[MAX_SKB_FRAGS] instead of the true last entry. This is likely due to a "race" of the commit under Fixes landing close to commit 031097d9e079 ("bpf: sk_msg, zap ingress queue on psock down") Convert to ARRAY_SIZE and drop the data[start] / - start (as suggested by Sabrina). | ||||
| CVE-2026-64053 | 1 Linux | 1 Linux Kernel | 2026-09-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: block: don't overwrite bip_vcnt in bio_integrity_copy_user() bio_integrity_add_page() already sets bip_vcnt to 1 for the bounce segment. Overwriting it with nr_vecs breaks bip_vcnt <= bip_max_vcnt on WRITE (bip_max_vcnt is 1), so the gap-merge checks in block/blk.h read past the bip_vec[] flex array. On READ the read is in bounds but lands on a saved user bvec instead of the bounce. The line was added for split propagation, but bio_integrity_clone() doesn't copy bip_vcnt and BIP_CLONE_FLAGS excludes BIP_COPY_USER. | ||||
| CVE-2026-76757 | 1 Drupal | 1 Gammu Sms Daemon | 2026-09-02 | 5.9 Medium |
| Vulnerability in Drupal Gammu SMS Daemon. This issue affects Gammu SMS Daemon versions: *.*. | ||||