Export limit exceeded: 49172 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (49172 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-55127 | 2 Aquaplatform, Revive | 2 Revive Adserver, Adserver | 2026-01-14 | 5.4 Medium |
| HackerOne community member Dao Hoang Anh (yoyomiski) has reported an improper neutralization of whitespace in the username when adding new users. A username with leading or trailing whitespace could be virtually indistinguishable from its legitimate counterpart when the username is displayed in the UI, potentially leading to confusion. | ||||
| CVE-2025-39840 | 1 Linux | 1 Linux Kernel | 2026-01-14 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: audit: fix out-of-bounds read in audit_compare_dname_path() When a watch on dir=/ is combined with an fsnotify event for a single-character name directly under / (e.g., creating /a), an out-of-bounds read can occur in audit_compare_dname_path(). The helper parent_len() returns 1 for "/". In audit_compare_dname_path(), when parentlen equals the full path length (1), the code sets p = path + 1 and pathlen = 1 - 1 = 0. The subsequent loop then dereferences p[pathlen - 1] (i.e., p[-1]), causing an out-of-bounds read. Fix this by adding a pathlen > 0 check to the while loop condition to prevent the out-of-bounds access. [PM: subject tweak, sign-off email fixes] | ||||
| CVE-2023-53420 | 1 Linux | 1 Linux Kernel | 2026-01-14 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: Fix panic about slab-out-of-bounds caused by ntfs_listxattr() Here is a BUG report from syzbot: BUG: KASAN: slab-out-of-bounds in ntfs_list_ea fs/ntfs3/xattr.c:191 [inline] BUG: KASAN: slab-out-of-bounds in ntfs_listxattr+0x401/0x570 fs/ntfs3/xattr.c:710 Read of size 1 at addr ffff888021acaf3d by task syz-executor128/3632 Call Trace: ntfs_list_ea fs/ntfs3/xattr.c:191 [inline] ntfs_listxattr+0x401/0x570 fs/ntfs3/xattr.c:710 vfs_listxattr fs/xattr.c:457 [inline] listxattr+0x293/0x2d0 fs/xattr.c:804 Fix the logic of ea_all iteration. When the ea->name_len is 0, return immediately, or Add2Ptr() would visit invalid memory in the next loop. [almaz.alexandrovich@paragon-software.com: lines of the patch have changed] | ||||
| CVE-2025-66866 | 1 Gnu | 1 Binutils | 2026-01-14 | 5.5 Medium |
| An issue was discovered in function d_abi_tags in file cp-demangle.c in BinUtils 2.26 allows attackers to cause a denial of service via crafted PE file. | ||||
| CVE-2025-66865 | 1 Gnu | 1 Binutils | 2026-01-14 | 7.5 High |
| An issue was discovered in function d_print_comp_inner in file cp-demangle.c in BinUtils 2.26 allows attackers to cause a denial of service via crafted PE file. | ||||
| CVE-2025-66863 | 1 Gnu | 1 Binutils | 2026-01-14 | 7.5 High |
| An issue was discovered in function d_discriminator in file cp-demangle.c in BinUtils 2.26 allows attackers to cause a denial of service via crafted PE file. | ||||
| CVE-2025-66862 | 1 Gnu | 1 Binutils | 2026-01-14 | 7.5 High |
| A buffer overflow vulnerability in function gnu_special in file cplus-dem.c in BinUtils 2.26 allows attackers to cause a denial of service via crafted PE file. | ||||
| CVE-2025-66861 | 1 Gnu | 1 Binutils | 2026-01-14 | 2.5 Low |
| An issue was discovered in function d_unqualified_name in file cp-demangle.c in BinUtils 2.26 allowing attackers to cause a denial of service via crafted PE file. | ||||
| CVE-2025-63927 | 1 Airpig2011 | 1 Iec104 | 2026-01-14 | 4 Medium |
| A heap-use-after-free vulnerability exists in airpig2011 IEC104 thru Commit be6d841 (2019-07-08). During multi-threaded client execution, the function Iec10x_Scheduled can access memory that has already been freed, potentially causing program crashes or undefined behavior. This may be exploited to trigger a denial-of-service or memory corruption. | ||||
| CVE-2020-16010 | 1 Google | 2 Android, Chrome | 2026-01-14 | 9.6 Critical |
| Heap buffer overflow in UI in Google Chrome on Android prior to 86.0.4240.185 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. | ||||
| CVE-2023-53397 | 1 Linux | 1 Linux Kernel | 2026-01-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: modpost: fix off by one in is_executable_section() The > comparison should be >= to prevent an out of bounds array access. | ||||
| CVE-2023-53395 | 1 Linux | 1 Linux Kernel | 2026-01-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Add AML_NO_OPERAND_RESOLVE flag to Timer ACPICA commit 90310989a0790032f5a0140741ff09b545af4bc5 According to the ACPI specification 19.6.134, no argument is required to be passed for ASL Timer instruction. For taking care of no argument, AML_NO_OPERAND_RESOLVE flag is added to ASL Timer instruction opcode. When ASL timer instruction interpreted by ACPI interpreter, getting error. After adding AML_NO_OPERAND_RESOLVE flag to ASL Timer instruction opcode, issue is not observed. ============================================================= UBSAN: array-index-out-of-bounds in acpica/dswexec.c:401:12 index -1 is out of range for type 'union acpi_operand_object *[9]' CPU: 37 PID: 1678 Comm: cat Not tainted 6.0.0-dev-th500-6.0.y-1+bcf8c46459e407-generic-64k HW name: NVIDIA BIOS v1.1.1-d7acbfc-dirty 12/19/2022 Call trace: dump_backtrace+0xe0/0x130 show_stack+0x20/0x60 dump_stack_lvl+0x68/0x84 dump_stack+0x18/0x34 ubsan_epilogue+0x10/0x50 __ubsan_handle_out_of_bounds+0x80/0x90 acpi_ds_exec_end_op+0x1bc/0x6d8 acpi_ps_parse_loop+0x57c/0x618 acpi_ps_parse_aml+0x1e0/0x4b4 acpi_ps_execute_method+0x24c/0x2b8 acpi_ns_evaluate+0x3a8/0x4bc acpi_evaluate_object+0x15c/0x37c acpi_evaluate_integer+0x54/0x15c show_power+0x8c/0x12c [acpi_power_meter] | ||||
| CVE-2023-53357 | 1 Linux | 1 Linux Kernel | 2026-01-14 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: check slab-out-of-bounds in md_bitmap_get_counter If we write a large number to md/bitmap_set_bits, md_bitmap_checkpage() will return -EINVAL because 'page >= bitmap->pages', but the return value was not checked immediately in md_bitmap_get_counter() in order to set *blocks value and slab-out-of-bounds occurs. Move check of 'page >= bitmap->pages' to md_bitmap_get_counter() and return directly if true. | ||||
| CVE-2023-53340 | 1 Linux | 1 Linux Kernel | 2026-01-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Collect command failures data only for known commands DEVX can issue a general command, which is not used by mlx5 driver. In case such command is failed, mlx5 is trying to collect the failure data, However, mlx5 doesn't create a storage for this command, since mlx5 doesn't use it. This lead to array-index-out-of-bounds error. Fix it by checking whether the command is known before collecting the failure data. | ||||
| CVE-2023-53309 | 1 Linux | 1 Linux Kernel | 2026-01-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/radeon: Fix integer overflow in radeon_cs_parser_init The type of size is unsigned, if size is 0x40000000, there will be an integer overflow, size will be zero after size *= sizeof(uint32_t), will cause uninitialized memory to be referenced later | ||||
| CVE-2023-53272 | 1 Linux | 1 Linux Kernel | 2026-01-14 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ena: fix shift-out-of-bounds in exponential backoff The ENA adapters on our instances occasionally reset. Once recently logged a UBSAN failure to console in the process: UBSAN: shift-out-of-bounds in build/linux/drivers/net/ethernet/amazon/ena/ena_com.c:540:13 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 28 PID: 70012 Comm: kworker/u72:2 Kdump: loaded not tainted 5.15.117 Hardware name: Amazon EC2 c5d.9xlarge/, BIOS 1.0 10/16/2017 Workqueue: ena ena_fw_reset_device [ena] Call Trace: <TASK> dump_stack_lvl+0x4a/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x36 __ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e ? __const_udelay+0x43/0x50 ena_delay_exponential_backoff_us.cold+0x16/0x1e [ena] wait_for_reset_state+0x54/0xa0 [ena] ena_com_dev_reset+0xc8/0x110 [ena] ena_down+0x3fe/0x480 [ena] ena_destroy_device+0xeb/0xf0 [ena] ena_fw_reset_device+0x30/0x50 [ena] process_one_work+0x22b/0x3d0 worker_thread+0x4d/0x3f0 ? process_one_work+0x3d0/0x3d0 kthread+0x12a/0x150 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> Apparently, the reset delays are getting so large they can trigger a UBSAN panic. Looking at the code, the current timeout is capped at 5000us. Using a base value of 100us, the current code will overflow after (1<<29). Even at values before 32, this function wraps around, perhaps unintentionally. Cap the value of the exponent used for this backoff at (1<<16) which is larger than currently necessary, but large enough to support bigger values in the future. | ||||
| CVE-2023-53265 | 1 Linux | 1 Linux Kernel | 2026-01-14 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ubi: ensure that VID header offset + VID header size <= alloc, size Ensure that the VID header offset + VID header size does not exceed the allocated area to avoid slab OOB. BUG: KASAN: slab-out-of-bounds in crc32_body lib/crc32.c:111 [inline] BUG: KASAN: slab-out-of-bounds in crc32_le_generic lib/crc32.c:179 [inline] BUG: KASAN: slab-out-of-bounds in crc32_le_base+0x58c/0x626 lib/crc32.c:197 Read of size 4 at addr ffff88802bb36f00 by task syz-executor136/1555 CPU: 2 PID: 1555 Comm: syz-executor136 Tainted: G W 6.0.0-1868 #1 Hardware name: Red Hat KVM, BIOS 1.13.0-2.module+el8.3.0+7860+a7792d29 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x85/0xad lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold.13+0xb6/0x6bb mm/kasan/report.c:433 kasan_report+0xa7/0x11b mm/kasan/report.c:495 crc32_body lib/crc32.c:111 [inline] crc32_le_generic lib/crc32.c:179 [inline] crc32_le_base+0x58c/0x626 lib/crc32.c:197 ubi_io_write_vid_hdr+0x1b7/0x472 drivers/mtd/ubi/io.c:1067 create_vtbl+0x4d5/0x9c4 drivers/mtd/ubi/vtbl.c:317 create_empty_lvol drivers/mtd/ubi/vtbl.c:500 [inline] ubi_read_volume_table+0x67b/0x288a drivers/mtd/ubi/vtbl.c:812 ubi_attach+0xf34/0x1603 drivers/mtd/ubi/attach.c:1601 ubi_attach_mtd_dev+0x6f3/0x185e drivers/mtd/ubi/build.c:965 ctrl_cdev_ioctl+0x2db/0x347 drivers/mtd/ubi/cdev.c:1043 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x193/0x213 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3e/0x86 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0x0 RIP: 0033:0x7f96d5cf753d Code: RSP: 002b:00007fffd72206f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f96d5cf753d RDX: 0000000020000080 RSI: 0000000040186f40 RDI: 0000000000000003 RBP: 0000000000400cd0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000400be0 R13: 00007fffd72207e0 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 1555: kasan_save_stack+0x20/0x3d mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:437 [inline] ____kasan_kmalloc mm/kasan/common.c:516 [inline] __kasan_kmalloc+0x88/0xa3 mm/kasan/common.c:525 kasan_kmalloc include/linux/kasan.h:234 [inline] __kmalloc+0x138/0x257 mm/slub.c:4429 kmalloc include/linux/slab.h:605 [inline] ubi_alloc_vid_buf drivers/mtd/ubi/ubi.h:1093 [inline] create_vtbl+0xcc/0x9c4 drivers/mtd/ubi/vtbl.c:295 create_empty_lvol drivers/mtd/ubi/vtbl.c:500 [inline] ubi_read_volume_table+0x67b/0x288a drivers/mtd/ubi/vtbl.c:812 ubi_attach+0xf34/0x1603 drivers/mtd/ubi/attach.c:1601 ubi_attach_mtd_dev+0x6f3/0x185e drivers/mtd/ubi/build.c:965 ctrl_cdev_ioctl+0x2db/0x347 drivers/mtd/ubi/cdev.c:1043 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x193/0x213 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3e/0x86 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0x0 The buggy address belongs to the object at ffff88802bb36e00 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 0 bytes to the right of 256-byte region [ffff88802bb36e00, ffff88802bb36f00) The buggy address belongs to the physical page: page:00000000ea4d1263 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x2bb36 head:00000000ea4d1263 order:1 compound_mapcount:0 compound_pincount:0 flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) raw: 000fffffc0010200 ffffea000066c300 dead000000000003 ffff888100042b40 raw: 0000000000000000 00000000001 ---truncated--- | ||||
| CVE-2022-50366 | 1 Linux | 1 Linux Kernel | 2026-01-14 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue When value < time_unit, the parameter of ilog2() will be zero and the return value is -1. u64(-1) is too large for shift exponent and then will trigger shift-out-of-bounds: shift exponent 18446744073709551615 is too large for 32-bit type 'int' Call Trace: rapl_compute_time_window_core rapl_write_data_raw set_time_window store_constraint_time_window_us | ||||
| CVE-2018-0175 | 2 Cisco, Rockwellautomation | 10 Ios, Ios Xe, Ios Xr and 7 more | 2026-01-14 | 8 High |
| Format String vulnerability in the Link Layer Discovery Protocol (LLDP) subsystem of Cisco IOS Software, Cisco IOS XE Software, and Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges on an affected device. Cisco Bug IDs: CSCvd73664. | ||||
| CVE-2018-0167 | 2 Cisco, Rockwellautomation | 18 Asr 9001, Asr 9006, Asr 9010 and 15 more | 2026-01-14 | 8.8 High |
| Multiple Buffer Overflow vulnerabilities in the Link Layer Discovery Protocol (LLDP) subsystem of Cisco IOS Software, Cisco IOS XE Software, and Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges on an affected device. Cisco Bug IDs: CSCuo17183, CSCvd73487. | ||||